linux-stable-rt/arch/arm/mach-s3c6410/Kconfig

# arch/arm/mach-s3c6410/Kconfig
#
# Copyright 2008 Openmoko, Inc.
# Copyright 2008 Simtec Electronics
#
# Licensed under GPLv2

# Configuration options for the S3C6410 CPU

config CPU_S3C6410
	bool
	select CPU_S3C6400_INIT
	select CPU_S3C6400_CLOCK
	help
	  Enable S3C6410 CPU support

config S3C6410_SETUP_SDHCI
	bool
	select S3C64XX_SETUP_SDHCI_GPIO
	help
	  Internal helper functions for S3C6410 based SDHCI systems

config MACH_ANW6410
	bool "A&W6410"
	select CPU_S3C6410
	select S3C_DEV_FB
	select S3C64XX_SETUP_FB_24BPP
	help
	  Machine support for the A&W6410

config MACH_SMDK6410
	bool "SMDK6410"
	select CPU_S3C6410
	select S3C_DEV_HSMMC
	select S3C_DEV_HSMMC1
	select S3C_DEV_I2C1
	select S3C_DEV_FB
	select S3C_DEV_USB_HOST
	select S3C_DEV_USB_HSOTG
	select S3C6410_SETUP_SDHCI
	select S3C64XX_SETUP_I2C1
	select S3C64XX_SETUP_FB_24BPP
	help
	  Machine support for the Samsung SMDK6410

# At least some of the SMDK6410s were shipped with the card detect
# for the MMC/SD slots connected to the same input. This means that
# either the boards need to be altered to have channel0 to an alternate
# configuration or that only one slot can be used.

choice
	prompt "SMDK6410 MMC/SD slot setup"
	depends on MACH_SMDK6410

config SMDK6410_SD_CH0
	bool "Use channel 0 only"
	depends on MACH_SMDK6410
	help
          Select CON7 (channel 0) as the MMC/SD slot, as
	  at least some SMDK6410 boards come with the
	  resistors fitted so that the card detects for
	  channels 0 and 1 are the same.
       
config SMDK6410_SD_CH1
	bool "Use channel 1 only"
	depends on MACH_SMDK6410
	help
          Select CON6 (channel 1) as the MMC/SD slot, as
	  at least some SMDK6410 boards come with the
	  resistors fitted so that the card detects for
	  channels 0 and 1 are the same.

endchoice

config SMDK6410_WM1190_EV1
	bool "Support Wolfson Microelectronics 1190-EV1 PMIC card"
	depends on MACH_SMDK6410
	select REGULATOR
	select REGULATOR_WM8350
	select MFD_WM8350_I2C
	select MFD_WM8350_CONFIG_MODE_0
	select MFD_WM8350_CONFIG_MODE_3
	select MFD_WM8352_CONFIG_MODE_0
	help
	  The Wolfson Microelectronics 1190-EV1 is a WM835x based PMIC
	  and audio daughtercard for the Samsung SMDK6410 reference
	  platform.  Enabling this option will build support for this
	  module into the kernel.  The presence of the module will be
	  detected at runtime so the the resulting kernel can be used
	  with or without the 1190-EV1 fitted.

config MACH_NCP
	bool "NCP"
	select CPU_S3C6410
	select S3C_DEV_I2C1
	select S3C_DEV_HSMMC1
	select S3C64XX_SETUP_I2C1
	help
          Machine support for the Samsung NCP

config MACH_HMT
	bool "Airgoo HMT"
	select CPU_S3C6410
	select S3C_DEV_FB
	select S3C_DEV_NAND
	select S3C_DEV_USB_HOST
	select S3C64XX_SETUP_FB_24BPP
	select HAVE_PWM
	help
	  Machine support for the Airgoo HMT
[ARM] S3C64XX: Initial arch directory Add the initial PLAT_S3C64XX support files and directory structure. Signed-off-by: Ben Dooks <ben-linux@fluff.org> 2008-10-21 21:06:39 +08:00			`# arch/arm/mach-s3c6410/Kconfig`
			`#`
			`# Copyright 2008 Openmoko, Inc.`
			`# Copyright 2008 Simtec Electronics`
			`#`
			`# Licensed under GPLv2`

			`# Configuration options for the S3C6410 CPU`
[ARM] S3C6410: Initial CPU support code Initial support for the Samsung S3C6410 SoC. Signed-off-by: Ben Dooks <ben-linux@fluff.org> 2008-10-21 21:06:50 +08:00
			`config CPU_S3C6410`
			`bool`
[ARM] S3C64XX: Common init code for S3C6400 and S3C6410 Add the common initialisation code for both the S3C6400 and S3C6410, the UART registration. Signed-off-by: Ben Dooks <ben-linux@fluff.org> 2008-10-21 21:06:58 +08:00			`select CPU_S3C6400_INIT`
[ARM] S3C64XX: Clock support for S3C6400/S3C6410 Add the PLL clock initialisation and clock registration and include the clocks sourced via CLKDIVx for most of the on-chip peripherals. Signed-off-by: Ben Dooks <ben-linux@fluff.org> 2008-10-21 21:07:02 +08:00			`select CPU_S3C6400_CLOCK`
[ARM] S3C6410: Initial CPU support code Initial support for the Samsung S3C6410 SoC. Signed-off-by: Ben Dooks <ben-linux@fluff.org> 2008-10-21 21:06:50 +08:00			`help`
			`Enable S3C6410 CPU support`

[ARM] S3C6410: Add helper for setting SDHCI device information Add the necessary helper functions for setting up the SDHCI device information. Signed-off-by: Ben Dooks <ben-linux@fluff.org> 2008-11-01 00:14:38 +08:00			`config S3C6410_SETUP_SDHCI`
			`bool`
[ARM] S3C64XX: Add S3C6400 SDHCI setup support Add support for S3C6400 SDHCI channels 0 and 1, making the GPIO code common to both S3C6400 and S3C6410. Signed-off-by: Ben Dooks <ben-linux@fluff.org> 2009-03-25 19:01:24 +08:00			`select S3C64XX_SETUP_SDHCI_GPIO`
[ARM] S3C6410: Add helper for setting SDHCI device information Add the necessary helper functions for setting up the SDHCI device information. Signed-off-by: Ben Dooks <ben-linux@fluff.org> 2008-11-01 00:14:38 +08:00			`help`
			`Internal helper functions for S3C6410 based SDHCI systems`

[PATCH] S3C64XX: Basic A&W6410 board support patch V2 A&W6410 board uses Samsung S3C6410 SoC and it is registered with 2183. Framebuffer and ethernet devices are supported currently. Unnecessary header file is removed. Fix to use __raw_writel() and __raw_readl() for accessing mapped address. Thank you for your comments. Signed-off-by: Kwangwoo Lee <kwangwoo.lee@gmail.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org> 2009-04-28 09:35:57 +08:00			`config MACH_ANW6410`
			`bool "A&W6410"`
			`select CPU_S3C6410`
			`select S3C_DEV_FB`
			`select S3C64XX_SETUP_FB_24BPP`
			`help`
			`Machine support for the A&W6410`

[ARM] SMDK6410: Initial machine support Initial machine support for the Samsung SMDK6410. Signed-off-by: Ben Dooks <ben-linux@fluff.org> 2008-10-21 21:07:09 +08:00			`config MACH_SMDK6410`
			`bool "SMDK6410"`
			`select CPU_S3C6410`
[ARM] S3C: Move HSMMC device definition to plat-s3ec Move the definition for the hsmmc device to plat-s3c to be shared between the s3c24xx and s3c64xx platforms. Signed-off-by: Ben Dooks <ben-linux@fluff.org> 2008-11-01 00:14:28 +08:00			`select S3C_DEV_HSMMC`
[ARM] SMDK6410: Add availability of second hsmmc channel Add SDHCI channel 1. Signed-off-by: Ben Dooks <ben-linux@fluff.org> 2008-11-04 04:14:53 +08:00			`select S3C_DEV_HSMMC1`
[ARM] SMDK6410: Add second I2C channel. Add the second I2C channel on the SMDK6410. Signed-off-by: Ben Dooks <ben-linux@fluff.org> 2008-11-01 00:14:57 +08:00			`select S3C_DEV_I2C1`
[ARM] SMDK6410: Add LCD (LCD48WVGA) definitions Add support for the LCD 48WVGA module attached to the SMDK6410. Signed-off-by: Ben Dooks <ben-linux@fluff.org> 2008-11-19 23:41:34 +08:00			`select S3C_DEV_FB`
[ARM] SMDK6410: Add USB OHCI host Add USB OHCI host capability to the SMDK6410 for either USB OtG or a single/double USB host port. Signed-off-by: Ben Dooks <ben@simtec.co.uk> Signed-off-by: Ben Dooks <ben-linux@fluff.org> 2009-03-07 03:49:49 +08:00			`select S3C_DEV_USB_HOST`
[ARM] SMDK6410: Add USB high-speed/OtG gadget device Add the USB gadget support to the SMDK6410. Signed-off-by: Ben Dooks <ben@simtec.co.uk> Signed-off-by: Ben Dooks <ben-linux@fluff.org> 2009-05-17 05:11:20 +08:00			`select S3C_DEV_USB_HSOTG`
[ARM] S3C6410: Add helper for setting SDHCI device information Add the necessary helper functions for setting up the SDHCI device information. Signed-off-by: Ben Dooks <ben-linux@fluff.org> 2008-11-01 00:14:38 +08:00			`select S3C6410_SETUP_SDHCI`
[ARM] SMDK6410: Add second I2C channel. Add the second I2C channel on the SMDK6410. Signed-off-by: Ben Dooks <ben-linux@fluff.org> 2008-11-01 00:14:57 +08:00			`select S3C64XX_SETUP_I2C1`
[ARM] SMDK6410: Add LCD (LCD48WVGA) definitions Add support for the LCD 48WVGA module attached to the SMDK6410. Signed-off-by: Ben Dooks <ben-linux@fluff.org> 2008-11-19 23:41:34 +08:00			`select S3C64XX_SETUP_FB_24BPP`
[ARM] SMDK6410: Initial machine support Initial machine support for the Samsung SMDK6410. Signed-off-by: Ben Dooks <ben-linux@fluff.org> 2008-10-21 21:07:09 +08:00			`help`
			`Machine support for the Samsung SMDK6410`
[ARM] SMDK6410: Add availability of second hsmmc channel Add SDHCI channel 1. Signed-off-by: Ben Dooks <ben-linux@fluff.org> 2008-11-04 04:14:53 +08:00
			`# At least some of the SMDK6410s were shipped with the card detect`
			`# for the MMC/SD slots connected to the same input. This means that`
			`# either the boards need to be altered to have channel0 to an alternate`
			`# configuration or that only one slot can be used.`

			`choice`
			`prompt "SMDK6410 MMC/SD slot setup"`
			`depends on MACH_SMDK6410`

			`config SMDK6410_SD_CH0`
			`bool "Use channel 0 only"`
			`depends on MACH_SMDK6410`
			`help`
			`Select CON7 (channel 0) as the MMC/SD slot, as`
			`at least some SMDK6410 boards come with the`
			`resistors fitted so that the card detects for`
			`channels 0 and 1 are the same.`

			`config SMDK6410_SD_CH1`
			`bool "Use channel 1 only"`
			`depends on MACH_SMDK6410`
			`help`
			`Select CON6 (channel 1) as the MMC/SD slot, as`
			`at least some SMDK6410 boards come with the`
			`resistors fitted so that the card detects for`
			`channels 0 and 1 are the same.`

			`endchoice`
[ARM] SMDK6410: Support WM1190-EV1 PMIC board The SMDK6410 supports pluggable PMIC boards. One such board is the Wolfson Microelectronics 1190-EV1 for the WM8350 PMICs. This patch introduces initial support for this module. Further patches will add additional integration with the system as support for the S3C6410 and other devices on the system improves. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org> 2009-02-17 23:59:38 +08:00
			`config SMDK6410_WM1190_EV1`
			`bool "Support Wolfson Microelectronics 1190-EV1 PMIC card"`
			`depends on MACH_SMDK6410`
			`select REGULATOR`
			`select REGULATOR_WM8350`
			`select MFD_WM8350_I2C`
			`select MFD_WM8350_CONFIG_MODE_0`
			`select MFD_WM8350_CONFIG_MODE_3`
			`select MFD_WM8352_CONFIG_MODE_0`
			`help`
			`The Wolfson Microelectronics 1190-EV1 is a WM835x based PMIC`
			`and audio daughtercard for the Samsung SMDK6410 reference`
			`platform. Enabling this option will build support for this`
			`module into the kernel. The presence of the module will be`
			`detected at runtime so the the resulting kernel can be used`
			`with or without the 1190-EV1 fitted.`
[ARM] S3C6410: Basic support for NCP board (v2) This is a basic support for NCP board based on s3c6410. Only enables the serial. also remove empty i2c device. Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org> 2009-03-11 10:05:55 +08:00
			`config MACH_NCP`
			`bool "NCP"`
			`select CPU_S3C6410`
			`select S3C_DEV_I2C1`
			`select S3C_DEV_HSMMC1`
			`select S3C64XX_SETUP_I2C1`
			`help`
			`Machine support for the Samsung NCP`
ARM: S3C6410: airgoo hmt board support Add support for the Airgoo HMT (home media terminal) device. The HMT is a tablet device with a s3c6410, a 7" LCD and a number of peripheral connections. For more details of the hardware specs, see: http://article.gmane.org/gmane.linux.debian.devel.embedded/4307 Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk> [ben-linux@fluff.org: subject rewrite] Signed-off-by: Ben Dooks <ben-linux@fluff.org> 2009-07-01 23:47:09 +08:00
			`config MACH_HMT`
			`bool "Airgoo HMT"`
			`select CPU_S3C6410`
			`select S3C_DEV_FB`
ARM: S3C: Add missing selection of S3C_DEV_NAND in machine Kconfigs. A number of machines that need s3c_device_nand present do not select this in their Kconfig entries. Add the necessary selection of the configuration S3C_DEV_NAND so that we avoid the following error: arch/arm/mach-s3c2410/built-in.o: In function `bast_map_io': arch/arm/mach-s3c2410/mach-bast.c:634: undefined reference to `s3c_device_nand' arch/arm/mach-s3c2412/built-in.o: In function `s3c2412_init_uarts': arch/arm/mach-s3c2412/s3c2412.c:109: undefined reference to `s3c_device_nand' arch/arm/mach-s3c2412/built-in.o: In function `jive_machine_init': arch/arm/mach-s3c2412/mach-jive.c:673: undefined reference to `s3c_device_nand' Signed-off-by: Ben Dooks <ben-linux@fluff.org> 2009-09-17 07:01:54 +08:00			`select S3C_DEV_NAND`
ARM: S3C6410: airgoo hmt board support Add support for the Airgoo HMT (home media terminal) device. The HMT is a tablet device with a s3c6410, a 7" LCD and a number of peripheral connections. For more details of the hardware specs, see: http://article.gmane.org/gmane.linux.debian.devel.embedded/4307 Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk> [ben-linux@fluff.org: subject rewrite] Signed-off-by: Ben Dooks <ben-linux@fluff.org> 2009-07-01 23:47:09 +08:00			`select S3C_DEV_USB_HOST`
			`select S3C64XX_SETUP_FB_24BPP`
			`select HAVE_PWM`
			`help`
			`Machine support for the Airgoo HMT`