blackfin architecture
This adds support for the Analog Devices Blackfin processor architecture, and
currently supports the BF533, BF532, BF531, BF537, BF536, BF534, and BF561
(Dual Core) devices, with a variety of development platforms including those
avaliable from Analog Devices (BF533-EZKit, BF533-STAMP, BF537-STAMP,
BF561-EZKIT), and Bluetechnix! Tinyboards.
The Blackfin architecture was jointly developed by Intel and Analog Devices
Inc. (ADI) as the Micro Signal Architecture (MSA) core and introduced it in
December of 2000. Since then ADI has put this core into its Blackfin
processor family of devices. The Blackfin core has the advantages of a clean,
orthogonal,RISC-like microprocessor instruction set. It combines a dual-MAC
(Multiply/Accumulate), state-of-the-art signal processing engine and
single-instruction, multiple-data (SIMD) multimedia capabilities into a single
instruction-set architecture.
The Blackfin architecture, including the instruction set, is described by the
ADSP-BF53x/BF56x Blackfin Processor Programming Reference
http://blackfin.uclinux.org/gf/download/frsrelease/29/2549/Blackfin_PRM.pdf
The Blackfin processor is already supported by major releases of gcc, and
there are binary and source rpms/tarballs for many architectures at:
http://blackfin.uclinux.org/gf/project/toolchain/frs There is complete
documentation, including "getting started" guides available at:
http://docs.blackfin.uclinux.org/ which provides links to the sources and
patches you will need in order to set up a cross-compiling environment for
bfin-linux-uclibc
This patch, as well as the other patches (toolchain, distribution,
uClibc) are actively supported by Analog Devices Inc, at:
http://blackfin.uclinux.org/
We have tested this on LTP, and our test plan (including pass/fails) can
be found at:
http://docs.blackfin.uclinux.org/doku.php?id=testing_the_linux_kernel
[m.kozlowski@tuxland.pl: balance parenthesis in blackfin header files]
Signed-off-by: Bryan Wu <bryan.wu@analog.com>
Signed-off-by: Mariusz Kozlowski <m.kozlowski@tuxland.pl>
Signed-off-by: Aubrey Li <aubrey.li@analog.com>
Signed-off-by: Jie Zhang <jie.zhang@analog.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-07 05:50:22 +08:00
|
|
|
/*
|
|
|
|
* File: arch/blackfin/mach-bf561/coreb.c
|
|
|
|
* Based on:
|
|
|
|
* Author:
|
|
|
|
*
|
|
|
|
* Created:
|
|
|
|
* Description: Handle CoreB on a BF561
|
|
|
|
*
|
|
|
|
* Modified:
|
|
|
|
* Copyright 2004-2006 Analog Devices Inc.
|
|
|
|
*
|
|
|
|
* Bugs: Enter bugs at http://blackfin.uclinux.org/
|
|
|
|
*
|
|
|
|
* This program is free software; you can redistribute it and/or modify
|
|
|
|
* it under the terms of the GNU General Public License as published by
|
|
|
|
* the Free Software Foundation; either version 2 of the License, or
|
|
|
|
* (at your option) any later version.
|
|
|
|
*
|
|
|
|
* This program is distributed in the hope that it will be useful,
|
|
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
|
|
* GNU General Public License for more details.
|
|
|
|
*
|
|
|
|
* You should have received a copy of the GNU General Public License
|
|
|
|
* along with this program; if not, see the file COPYING, or write
|
|
|
|
* to the Free Software Foundation, Inc.,
|
|
|
|
* 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
|
|
|
|
*/
|
|
|
|
|
|
|
|
#include <linux/mm.h>
|
|
|
|
#include <linux/miscdevice.h>
|
|
|
|
#include <linux/device.h>
|
|
|
|
#include <linux/ioport.h>
|
|
|
|
#include <linux/module.h>
|
2007-07-12 22:58:21 +08:00
|
|
|
#include <linux/uaccess.h>
|
blackfin architecture
This adds support for the Analog Devices Blackfin processor architecture, and
currently supports the BF533, BF532, BF531, BF537, BF536, BF534, and BF561
(Dual Core) devices, with a variety of development platforms including those
avaliable from Analog Devices (BF533-EZKit, BF533-STAMP, BF537-STAMP,
BF561-EZKIT), and Bluetechnix! Tinyboards.
The Blackfin architecture was jointly developed by Intel and Analog Devices
Inc. (ADI) as the Micro Signal Architecture (MSA) core and introduced it in
December of 2000. Since then ADI has put this core into its Blackfin
processor family of devices. The Blackfin core has the advantages of a clean,
orthogonal,RISC-like microprocessor instruction set. It combines a dual-MAC
(Multiply/Accumulate), state-of-the-art signal processing engine and
single-instruction, multiple-data (SIMD) multimedia capabilities into a single
instruction-set architecture.
The Blackfin architecture, including the instruction set, is described by the
ADSP-BF53x/BF56x Blackfin Processor Programming Reference
http://blackfin.uclinux.org/gf/download/frsrelease/29/2549/Blackfin_PRM.pdf
The Blackfin processor is already supported by major releases of gcc, and
there are binary and source rpms/tarballs for many architectures at:
http://blackfin.uclinux.org/gf/project/toolchain/frs There is complete
documentation, including "getting started" guides available at:
http://docs.blackfin.uclinux.org/ which provides links to the sources and
patches you will need in order to set up a cross-compiling environment for
bfin-linux-uclibc
This patch, as well as the other patches (toolchain, distribution,
uClibc) are actively supported by Analog Devices Inc, at:
http://blackfin.uclinux.org/
We have tested this on LTP, and our test plan (including pass/fails) can
be found at:
http://docs.blackfin.uclinux.org/doku.php?id=testing_the_linux_kernel
[m.kozlowski@tuxland.pl: balance parenthesis in blackfin header files]
Signed-off-by: Bryan Wu <bryan.wu@analog.com>
Signed-off-by: Mariusz Kozlowski <m.kozlowski@tuxland.pl>
Signed-off-by: Aubrey Li <aubrey.li@analog.com>
Signed-off-by: Jie Zhang <jie.zhang@analog.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-07 05:50:22 +08:00
|
|
|
#include <asm/dma.h>
|
|
|
|
|
|
|
|
#define MODULE_VER "v0.1"
|
|
|
|
|
|
|
|
static spinlock_t coreb_lock;
|
|
|
|
static wait_queue_head_t coreb_dma_wait;
|
|
|
|
|
|
|
|
#define COREB_IS_OPEN 0x00000001
|
|
|
|
#define COREB_IS_RUNNING 0x00000010
|
|
|
|
|
|
|
|
#define CMD_COREB_INDEX 1
|
|
|
|
#define CMD_COREB_START 2
|
|
|
|
#define CMD_COREB_STOP 3
|
|
|
|
#define CMD_COREB_RESET 4
|
|
|
|
|
|
|
|
#define COREB_MINOR 229
|
|
|
|
|
|
|
|
static unsigned long coreb_status = 0;
|
|
|
|
static unsigned long coreb_base = 0xff600000;
|
|
|
|
static unsigned long coreb_size = 0x4000;
|
|
|
|
int coreb_dma_done;
|
|
|
|
|
|
|
|
static loff_t coreb_lseek(struct file *file, loff_t offset, int origin);
|
|
|
|
static ssize_t coreb_read(struct file *file, char *buf, size_t count,
|
|
|
|
loff_t * ppos);
|
|
|
|
static ssize_t coreb_write(struct file *file, const char *buf, size_t count,
|
|
|
|
loff_t * ppos);
|
|
|
|
static int coreb_ioctl(struct inode *inode, struct file *file, unsigned int cmd,
|
|
|
|
unsigned long arg);
|
|
|
|
static int coreb_open(struct inode *inode, struct file *file);
|
|
|
|
static int coreb_release(struct inode *inode, struct file *file);
|
|
|
|
|
|
|
|
static irqreturn_t coreb_dma_interrupt(int irq, void *dev_id)
|
|
|
|
{
|
|
|
|
clear_dma_irqstat(CH_MEM_STREAM2_DEST);
|
|
|
|
coreb_dma_done = 1;
|
|
|
|
wake_up_interruptible(&coreb_dma_wait);
|
|
|
|
return IRQ_HANDLED;
|
|
|
|
}
|
|
|
|
|
|
|
|
static ssize_t coreb_write(struct file *file, const char *buf, size_t count,
|
|
|
|
loff_t * ppos)
|
|
|
|
{
|
|
|
|
unsigned long p = *ppos;
|
|
|
|
ssize_t wrote = 0;
|
|
|
|
|
|
|
|
if (p + count > coreb_size)
|
|
|
|
return -EFAULT;
|
|
|
|
|
|
|
|
while (count > 0) {
|
|
|
|
int len = count;
|
|
|
|
|
|
|
|
if (len > PAGE_SIZE)
|
|
|
|
len = PAGE_SIZE;
|
|
|
|
|
|
|
|
coreb_dma_done = 0;
|
|
|
|
|
|
|
|
/* Source Channel */
|
|
|
|
set_dma_start_addr(CH_MEM_STREAM2_SRC, (unsigned long)buf);
|
|
|
|
set_dma_x_count(CH_MEM_STREAM2_SRC, len);
|
|
|
|
set_dma_x_modify(CH_MEM_STREAM2_SRC, sizeof(char));
|
|
|
|
set_dma_config(CH_MEM_STREAM2_SRC, RESTART);
|
|
|
|
/* Destination Channel */
|
|
|
|
set_dma_start_addr(CH_MEM_STREAM2_DEST, coreb_base + p);
|
|
|
|
set_dma_x_count(CH_MEM_STREAM2_DEST, len);
|
|
|
|
set_dma_x_modify(CH_MEM_STREAM2_DEST, sizeof(char));
|
|
|
|
set_dma_config(CH_MEM_STREAM2_DEST, WNR | RESTART | DI_EN);
|
|
|
|
|
|
|
|
enable_dma(CH_MEM_STREAM2_SRC);
|
|
|
|
enable_dma(CH_MEM_STREAM2_DEST);
|
|
|
|
|
|
|
|
wait_event_interruptible(coreb_dma_wait, coreb_dma_done);
|
|
|
|
|
|
|
|
disable_dma(CH_MEM_STREAM2_SRC);
|
|
|
|
disable_dma(CH_MEM_STREAM2_DEST);
|
|
|
|
|
|
|
|
count -= len;
|
|
|
|
wrote += len;
|
|
|
|
buf += len;
|
|
|
|
p += len;
|
|
|
|
}
|
|
|
|
*ppos = p;
|
|
|
|
return wrote;
|
|
|
|
}
|
|
|
|
|
|
|
|
static ssize_t coreb_read(struct file *file, char *buf, size_t count,
|
|
|
|
loff_t * ppos)
|
|
|
|
{
|
|
|
|
unsigned long p = *ppos;
|
|
|
|
ssize_t read = 0;
|
|
|
|
|
|
|
|
if ((p + count) > coreb_size)
|
|
|
|
return -EFAULT;
|
|
|
|
|
|
|
|
while (count > 0) {
|
|
|
|
int len = count;
|
|
|
|
|
|
|
|
if (len > PAGE_SIZE)
|
|
|
|
len = PAGE_SIZE;
|
|
|
|
|
|
|
|
coreb_dma_done = 0;
|
|
|
|
|
|
|
|
/* Source Channel */
|
|
|
|
set_dma_start_addr(CH_MEM_STREAM2_SRC, coreb_base + p);
|
|
|
|
set_dma_x_count(CH_MEM_STREAM2_SRC, len);
|
|
|
|
set_dma_x_modify(CH_MEM_STREAM2_SRC, sizeof(char));
|
|
|
|
set_dma_config(CH_MEM_STREAM2_SRC, RESTART);
|
|
|
|
/* Destination Channel */
|
|
|
|
set_dma_start_addr(CH_MEM_STREAM2_DEST, (unsigned long)buf);
|
|
|
|
set_dma_x_count(CH_MEM_STREAM2_DEST, len);
|
|
|
|
set_dma_x_modify(CH_MEM_STREAM2_DEST, sizeof(char));
|
|
|
|
set_dma_config(CH_MEM_STREAM2_DEST, WNR | RESTART | DI_EN);
|
|
|
|
|
|
|
|
enable_dma(CH_MEM_STREAM2_SRC);
|
|
|
|
enable_dma(CH_MEM_STREAM2_DEST);
|
|
|
|
|
|
|
|
wait_event_interruptible(coreb_dma_wait, coreb_dma_done);
|
|
|
|
|
|
|
|
disable_dma(CH_MEM_STREAM2_SRC);
|
|
|
|
disable_dma(CH_MEM_STREAM2_DEST);
|
|
|
|
|
|
|
|
count -= len;
|
|
|
|
read += len;
|
|
|
|
buf += len;
|
|
|
|
p += len;
|
|
|
|
}
|
|
|
|
|
|
|
|
return read;
|
|
|
|
}
|
|
|
|
|
|
|
|
static loff_t coreb_lseek(struct file *file, loff_t offset, int origin)
|
|
|
|
{
|
|
|
|
loff_t ret;
|
|
|
|
|
|
|
|
mutex_lock(&file->f_dentry->d_inode->i_mutex);
|
|
|
|
|
|
|
|
switch (origin) {
|
|
|
|
case 0 /* SEEK_SET */ :
|
|
|
|
if (offset < coreb_size) {
|
|
|
|
file->f_pos = offset;
|
|
|
|
ret = file->f_pos;
|
|
|
|
} else
|
|
|
|
ret = -EINVAL;
|
|
|
|
break;
|
|
|
|
case 1 /* SEEK_CUR */ :
|
|
|
|
if ((offset + file->f_pos) < coreb_size) {
|
|
|
|
file->f_pos += offset;
|
|
|
|
ret = file->f_pos;
|
|
|
|
} else
|
|
|
|
ret = -EINVAL;
|
|
|
|
default:
|
|
|
|
ret = -EINVAL;
|
|
|
|
}
|
|
|
|
mutex_unlock(&file->f_dentry->d_inode->i_mutex);
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int coreb_open(struct inode *inode, struct file *file)
|
|
|
|
{
|
|
|
|
spin_lock_irq(&coreb_lock);
|
|
|
|
|
|
|
|
if (coreb_status & COREB_IS_OPEN)
|
|
|
|
goto out_busy;
|
|
|
|
|
|
|
|
coreb_status |= COREB_IS_OPEN;
|
|
|
|
|
|
|
|
spin_unlock_irq(&coreb_lock);
|
|
|
|
return 0;
|
|
|
|
|
2007-07-12 22:58:21 +08:00
|
|
|
out_busy:
|
blackfin architecture
This adds support for the Analog Devices Blackfin processor architecture, and
currently supports the BF533, BF532, BF531, BF537, BF536, BF534, and BF561
(Dual Core) devices, with a variety of development platforms including those
avaliable from Analog Devices (BF533-EZKit, BF533-STAMP, BF537-STAMP,
BF561-EZKIT), and Bluetechnix! Tinyboards.
The Blackfin architecture was jointly developed by Intel and Analog Devices
Inc. (ADI) as the Micro Signal Architecture (MSA) core and introduced it in
December of 2000. Since then ADI has put this core into its Blackfin
processor family of devices. The Blackfin core has the advantages of a clean,
orthogonal,RISC-like microprocessor instruction set. It combines a dual-MAC
(Multiply/Accumulate), state-of-the-art signal processing engine and
single-instruction, multiple-data (SIMD) multimedia capabilities into a single
instruction-set architecture.
The Blackfin architecture, including the instruction set, is described by the
ADSP-BF53x/BF56x Blackfin Processor Programming Reference
http://blackfin.uclinux.org/gf/download/frsrelease/29/2549/Blackfin_PRM.pdf
The Blackfin processor is already supported by major releases of gcc, and
there are binary and source rpms/tarballs for many architectures at:
http://blackfin.uclinux.org/gf/project/toolchain/frs There is complete
documentation, including "getting started" guides available at:
http://docs.blackfin.uclinux.org/ which provides links to the sources and
patches you will need in order to set up a cross-compiling environment for
bfin-linux-uclibc
This patch, as well as the other patches (toolchain, distribution,
uClibc) are actively supported by Analog Devices Inc, at:
http://blackfin.uclinux.org/
We have tested this on LTP, and our test plan (including pass/fails) can
be found at:
http://docs.blackfin.uclinux.org/doku.php?id=testing_the_linux_kernel
[m.kozlowski@tuxland.pl: balance parenthesis in blackfin header files]
Signed-off-by: Bryan Wu <bryan.wu@analog.com>
Signed-off-by: Mariusz Kozlowski <m.kozlowski@tuxland.pl>
Signed-off-by: Aubrey Li <aubrey.li@analog.com>
Signed-off-by: Jie Zhang <jie.zhang@analog.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-07 05:50:22 +08:00
|
|
|
spin_unlock_irq(&coreb_lock);
|
|
|
|
return -EBUSY;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int coreb_release(struct inode *inode, struct file *file)
|
|
|
|
{
|
|
|
|
spin_lock_irq(&coreb_lock);
|
|
|
|
coreb_status &= ~COREB_IS_OPEN;
|
|
|
|
spin_unlock_irq(&coreb_lock);
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int coreb_ioctl(struct inode *inode, struct file *file,
|
|
|
|
unsigned int cmd, unsigned long arg)
|
|
|
|
{
|
|
|
|
int retval = 0;
|
|
|
|
int coreb_index = 0;
|
|
|
|
|
|
|
|
switch (cmd) {
|
|
|
|
case CMD_COREB_INDEX:
|
|
|
|
if (copy_from_user(&coreb_index, (int *)arg, sizeof(int))) {
|
|
|
|
retval = -EFAULT;
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
|
|
|
|
spin_lock_irq(&coreb_lock);
|
|
|
|
switch (coreb_index) {
|
|
|
|
case 0:
|
|
|
|
coreb_base = 0xff600000;
|
|
|
|
coreb_size = 0x4000;
|
|
|
|
break;
|
|
|
|
case 1:
|
|
|
|
coreb_base = 0xff610000;
|
|
|
|
coreb_size = 0x4000;
|
|
|
|
break;
|
|
|
|
case 2:
|
|
|
|
coreb_base = 0xff500000;
|
|
|
|
coreb_size = 0x8000;
|
|
|
|
break;
|
|
|
|
case 3:
|
|
|
|
coreb_base = 0xff400000;
|
|
|
|
coreb_size = 0x8000;
|
|
|
|
break;
|
|
|
|
default:
|
|
|
|
retval = -EINVAL;
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
spin_unlock_irq(&coreb_lock);
|
|
|
|
|
|
|
|
mutex_lock(&file->f_dentry->d_inode->i_mutex);
|
|
|
|
file->f_pos = 0;
|
|
|
|
mutex_unlock(&file->f_dentry->d_inode->i_mutex);
|
|
|
|
break;
|
|
|
|
case CMD_COREB_START:
|
|
|
|
spin_lock_irq(&coreb_lock);
|
|
|
|
if (coreb_status & COREB_IS_RUNNING) {
|
|
|
|
retval = -EBUSY;
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
printk(KERN_INFO "Starting Core B\n");
|
|
|
|
coreb_status |= COREB_IS_RUNNING;
|
|
|
|
bfin_write_SICA_SYSCR(bfin_read_SICA_SYSCR() & ~0x0020);
|
|
|
|
SSYNC();
|
|
|
|
spin_lock_irq(&coreb_lock);
|
|
|
|
break;
|
|
|
|
#if defined(CONFIG_BF561_COREB_RESET)
|
|
|
|
case CMD_COREB_STOP:
|
|
|
|
spin_lock_irq(&coreb_lock);
|
|
|
|
printk(KERN_INFO "Stopping Core B\n");
|
|
|
|
bfin_write_SICA_SYSCR(bfin_read_SICA_SYSCR() | 0x0020);
|
|
|
|
bfin_write_SICB_SYSCR(bfin_read_SICB_SYSCR() | 0x0080);
|
|
|
|
coreb_status &= ~COREB_IS_RUNNING;
|
|
|
|
spin_lock_irq(&coreb_lock);
|
|
|
|
break;
|
|
|
|
case CMD_COREB_RESET:
|
|
|
|
printk(KERN_INFO "Resetting Core B\n");
|
|
|
|
bfin_write_SICB_SYSCR(bfin_read_SICB_SYSCR() | 0x0080);
|
|
|
|
break;
|
|
|
|
#endif
|
|
|
|
}
|
|
|
|
|
|
|
|
return retval;
|
|
|
|
}
|
|
|
|
|
|
|
|
static struct file_operations coreb_fops = {
|
|
|
|
.owner = THIS_MODULE,
|
|
|
|
.llseek = coreb_lseek,
|
|
|
|
.read = coreb_read,
|
|
|
|
.write = coreb_write,
|
|
|
|
.ioctl = coreb_ioctl,
|
|
|
|
.open = coreb_open,
|
|
|
|
.release = coreb_release
|
|
|
|
};
|
|
|
|
|
|
|
|
static struct miscdevice coreb_dev = {
|
|
|
|
COREB_MINOR,
|
|
|
|
"coreb",
|
|
|
|
&coreb_fops
|
|
|
|
};
|
|
|
|
|
|
|
|
static ssize_t coreb_show_status(struct device *dev, struct device_attribute *attr, char *buf)
|
|
|
|
{
|
|
|
|
return sprintf(buf,
|
|
|
|
"Base Address:\t0x%08lx\n"
|
|
|
|
"Core B is %s\n"
|
|
|
|
"SICA_SYSCR:\t%04x\n"
|
|
|
|
"SICB_SYSCR:\t%04x\n"
|
|
|
|
"\n"
|
|
|
|
"IRQ Status:\tCore A\t\tCore B\n"
|
|
|
|
"ISR0:\t\t%08x\t\t%08x\n"
|
|
|
|
"ISR1:\t\t%08x\t\t%08x\n"
|
|
|
|
"IMASK0:\t\t%08x\t\t%08x\n"
|
|
|
|
"IMASK1:\t\t%08x\t\t%08x\n",
|
|
|
|
coreb_base,
|
|
|
|
coreb_status & COREB_IS_RUNNING ? "running" : "stalled",
|
|
|
|
bfin_read_SICA_SYSCR(), bfin_read_SICB_SYSCR(),
|
|
|
|
bfin_read_SICA_ISR0(), bfin_read_SICB_ISR0(),
|
|
|
|
bfin_read_SICA_ISR1(), bfin_read_SICB_ISR0(),
|
|
|
|
bfin_read_SICA_IMASK0(), bfin_read_SICB_IMASK0(),
|
|
|
|
bfin_read_SICA_IMASK1(), bfin_read_SICB_IMASK1());
|
|
|
|
}
|
|
|
|
|
|
|
|
static DEVICE_ATTR(coreb_status, S_IRUGO, coreb_show_status, NULL);
|
|
|
|
|
|
|
|
int __init bf561_coreb_init(void)
|
|
|
|
{
|
|
|
|
init_waitqueue_head(&coreb_dma_wait);
|
|
|
|
|
|
|
|
spin_lock_init(&coreb_lock);
|
|
|
|
/* Request the core memory regions for Core B */
|
|
|
|
if (request_mem_region(0xff600000, 0x4000,
|
|
|
|
"Core B - Instruction SRAM") == NULL)
|
|
|
|
goto exit;
|
|
|
|
|
|
|
|
if (request_mem_region(0xFF610000, 0x4000,
|
|
|
|
"Core B - Instruction SRAM") == NULL)
|
|
|
|
goto release_instruction_a_sram;
|
|
|
|
|
|
|
|
if (request_mem_region(0xFF500000, 0x8000,
|
|
|
|
"Core B - Data Bank B SRAM") == NULL)
|
|
|
|
goto release_instruction_b_sram;
|
|
|
|
|
|
|
|
if (request_mem_region(0xff400000, 0x8000,
|
|
|
|
"Core B - Data Bank A SRAM") == NULL)
|
|
|
|
goto release_data_b_sram;
|
|
|
|
|
|
|
|
if (request_dma(CH_MEM_STREAM2_DEST, "Core B - DMA Destination") < 0)
|
|
|
|
goto release_data_a_sram;
|
|
|
|
|
|
|
|
if (request_dma(CH_MEM_STREAM2_SRC, "Core B - DMA Source") < 0)
|
|
|
|
goto release_dma_dest;
|
|
|
|
|
|
|
|
set_dma_callback(CH_MEM_STREAM2_DEST, coreb_dma_interrupt, NULL);
|
|
|
|
|
|
|
|
misc_register(&coreb_dev);
|
|
|
|
|
|
|
|
if (device_create_file(coreb_dev.this_device, &dev_attr_coreb_status))
|
|
|
|
goto release_dma_src;
|
|
|
|
|
|
|
|
printk(KERN_INFO "BF561 Core B driver %s initialized.\n", MODULE_VER);
|
|
|
|
return 0;
|
|
|
|
|
2007-07-12 22:58:21 +08:00
|
|
|
release_dma_src:
|
blackfin architecture
This adds support for the Analog Devices Blackfin processor architecture, and
currently supports the BF533, BF532, BF531, BF537, BF536, BF534, and BF561
(Dual Core) devices, with a variety of development platforms including those
avaliable from Analog Devices (BF533-EZKit, BF533-STAMP, BF537-STAMP,
BF561-EZKIT), and Bluetechnix! Tinyboards.
The Blackfin architecture was jointly developed by Intel and Analog Devices
Inc. (ADI) as the Micro Signal Architecture (MSA) core and introduced it in
December of 2000. Since then ADI has put this core into its Blackfin
processor family of devices. The Blackfin core has the advantages of a clean,
orthogonal,RISC-like microprocessor instruction set. It combines a dual-MAC
(Multiply/Accumulate), state-of-the-art signal processing engine and
single-instruction, multiple-data (SIMD) multimedia capabilities into a single
instruction-set architecture.
The Blackfin architecture, including the instruction set, is described by the
ADSP-BF53x/BF56x Blackfin Processor Programming Reference
http://blackfin.uclinux.org/gf/download/frsrelease/29/2549/Blackfin_PRM.pdf
The Blackfin processor is already supported by major releases of gcc, and
there are binary and source rpms/tarballs for many architectures at:
http://blackfin.uclinux.org/gf/project/toolchain/frs There is complete
documentation, including "getting started" guides available at:
http://docs.blackfin.uclinux.org/ which provides links to the sources and
patches you will need in order to set up a cross-compiling environment for
bfin-linux-uclibc
This patch, as well as the other patches (toolchain, distribution,
uClibc) are actively supported by Analog Devices Inc, at:
http://blackfin.uclinux.org/
We have tested this on LTP, and our test plan (including pass/fails) can
be found at:
http://docs.blackfin.uclinux.org/doku.php?id=testing_the_linux_kernel
[m.kozlowski@tuxland.pl: balance parenthesis in blackfin header files]
Signed-off-by: Bryan Wu <bryan.wu@analog.com>
Signed-off-by: Mariusz Kozlowski <m.kozlowski@tuxland.pl>
Signed-off-by: Aubrey Li <aubrey.li@analog.com>
Signed-off-by: Jie Zhang <jie.zhang@analog.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-07 05:50:22 +08:00
|
|
|
free_dma(CH_MEM_STREAM2_SRC);
|
2007-07-12 22:58:21 +08:00
|
|
|
release_dma_dest:
|
blackfin architecture
This adds support for the Analog Devices Blackfin processor architecture, and
currently supports the BF533, BF532, BF531, BF537, BF536, BF534, and BF561
(Dual Core) devices, with a variety of development platforms including those
avaliable from Analog Devices (BF533-EZKit, BF533-STAMP, BF537-STAMP,
BF561-EZKIT), and Bluetechnix! Tinyboards.
The Blackfin architecture was jointly developed by Intel and Analog Devices
Inc. (ADI) as the Micro Signal Architecture (MSA) core and introduced it in
December of 2000. Since then ADI has put this core into its Blackfin
processor family of devices. The Blackfin core has the advantages of a clean,
orthogonal,RISC-like microprocessor instruction set. It combines a dual-MAC
(Multiply/Accumulate), state-of-the-art signal processing engine and
single-instruction, multiple-data (SIMD) multimedia capabilities into a single
instruction-set architecture.
The Blackfin architecture, including the instruction set, is described by the
ADSP-BF53x/BF56x Blackfin Processor Programming Reference
http://blackfin.uclinux.org/gf/download/frsrelease/29/2549/Blackfin_PRM.pdf
The Blackfin processor is already supported by major releases of gcc, and
there are binary and source rpms/tarballs for many architectures at:
http://blackfin.uclinux.org/gf/project/toolchain/frs There is complete
documentation, including "getting started" guides available at:
http://docs.blackfin.uclinux.org/ which provides links to the sources and
patches you will need in order to set up a cross-compiling environment for
bfin-linux-uclibc
This patch, as well as the other patches (toolchain, distribution,
uClibc) are actively supported by Analog Devices Inc, at:
http://blackfin.uclinux.org/
We have tested this on LTP, and our test plan (including pass/fails) can
be found at:
http://docs.blackfin.uclinux.org/doku.php?id=testing_the_linux_kernel
[m.kozlowski@tuxland.pl: balance parenthesis in blackfin header files]
Signed-off-by: Bryan Wu <bryan.wu@analog.com>
Signed-off-by: Mariusz Kozlowski <m.kozlowski@tuxland.pl>
Signed-off-by: Aubrey Li <aubrey.li@analog.com>
Signed-off-by: Jie Zhang <jie.zhang@analog.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-07 05:50:22 +08:00
|
|
|
free_dma(CH_MEM_STREAM2_DEST);
|
2007-07-12 22:58:21 +08:00
|
|
|
release_data_a_sram:
|
blackfin architecture
This adds support for the Analog Devices Blackfin processor architecture, and
currently supports the BF533, BF532, BF531, BF537, BF536, BF534, and BF561
(Dual Core) devices, with a variety of development platforms including those
avaliable from Analog Devices (BF533-EZKit, BF533-STAMP, BF537-STAMP,
BF561-EZKIT), and Bluetechnix! Tinyboards.
The Blackfin architecture was jointly developed by Intel and Analog Devices
Inc. (ADI) as the Micro Signal Architecture (MSA) core and introduced it in
December of 2000. Since then ADI has put this core into its Blackfin
processor family of devices. The Blackfin core has the advantages of a clean,
orthogonal,RISC-like microprocessor instruction set. It combines a dual-MAC
(Multiply/Accumulate), state-of-the-art signal processing engine and
single-instruction, multiple-data (SIMD) multimedia capabilities into a single
instruction-set architecture.
The Blackfin architecture, including the instruction set, is described by the
ADSP-BF53x/BF56x Blackfin Processor Programming Reference
http://blackfin.uclinux.org/gf/download/frsrelease/29/2549/Blackfin_PRM.pdf
The Blackfin processor is already supported by major releases of gcc, and
there are binary and source rpms/tarballs for many architectures at:
http://blackfin.uclinux.org/gf/project/toolchain/frs There is complete
documentation, including "getting started" guides available at:
http://docs.blackfin.uclinux.org/ which provides links to the sources and
patches you will need in order to set up a cross-compiling environment for
bfin-linux-uclibc
This patch, as well as the other patches (toolchain, distribution,
uClibc) are actively supported by Analog Devices Inc, at:
http://blackfin.uclinux.org/
We have tested this on LTP, and our test plan (including pass/fails) can
be found at:
http://docs.blackfin.uclinux.org/doku.php?id=testing_the_linux_kernel
[m.kozlowski@tuxland.pl: balance parenthesis in blackfin header files]
Signed-off-by: Bryan Wu <bryan.wu@analog.com>
Signed-off-by: Mariusz Kozlowski <m.kozlowski@tuxland.pl>
Signed-off-by: Aubrey Li <aubrey.li@analog.com>
Signed-off-by: Jie Zhang <jie.zhang@analog.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-07 05:50:22 +08:00
|
|
|
release_mem_region(0xff400000, 0x8000);
|
2007-07-12 22:58:21 +08:00
|
|
|
release_data_b_sram:
|
blackfin architecture
This adds support for the Analog Devices Blackfin processor architecture, and
currently supports the BF533, BF532, BF531, BF537, BF536, BF534, and BF561
(Dual Core) devices, with a variety of development platforms including those
avaliable from Analog Devices (BF533-EZKit, BF533-STAMP, BF537-STAMP,
BF561-EZKIT), and Bluetechnix! Tinyboards.
The Blackfin architecture was jointly developed by Intel and Analog Devices
Inc. (ADI) as the Micro Signal Architecture (MSA) core and introduced it in
December of 2000. Since then ADI has put this core into its Blackfin
processor family of devices. The Blackfin core has the advantages of a clean,
orthogonal,RISC-like microprocessor instruction set. It combines a dual-MAC
(Multiply/Accumulate), state-of-the-art signal processing engine and
single-instruction, multiple-data (SIMD) multimedia capabilities into a single
instruction-set architecture.
The Blackfin architecture, including the instruction set, is described by the
ADSP-BF53x/BF56x Blackfin Processor Programming Reference
http://blackfin.uclinux.org/gf/download/frsrelease/29/2549/Blackfin_PRM.pdf
The Blackfin processor is already supported by major releases of gcc, and
there are binary and source rpms/tarballs for many architectures at:
http://blackfin.uclinux.org/gf/project/toolchain/frs There is complete
documentation, including "getting started" guides available at:
http://docs.blackfin.uclinux.org/ which provides links to the sources and
patches you will need in order to set up a cross-compiling environment for
bfin-linux-uclibc
This patch, as well as the other patches (toolchain, distribution,
uClibc) are actively supported by Analog Devices Inc, at:
http://blackfin.uclinux.org/
We have tested this on LTP, and our test plan (including pass/fails) can
be found at:
http://docs.blackfin.uclinux.org/doku.php?id=testing_the_linux_kernel
[m.kozlowski@tuxland.pl: balance parenthesis in blackfin header files]
Signed-off-by: Bryan Wu <bryan.wu@analog.com>
Signed-off-by: Mariusz Kozlowski <m.kozlowski@tuxland.pl>
Signed-off-by: Aubrey Li <aubrey.li@analog.com>
Signed-off-by: Jie Zhang <jie.zhang@analog.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-07 05:50:22 +08:00
|
|
|
release_mem_region(0xff500000, 0x8000);
|
2007-07-12 22:58:21 +08:00
|
|
|
release_instruction_b_sram:
|
blackfin architecture
This adds support for the Analog Devices Blackfin processor architecture, and
currently supports the BF533, BF532, BF531, BF537, BF536, BF534, and BF561
(Dual Core) devices, with a variety of development platforms including those
avaliable from Analog Devices (BF533-EZKit, BF533-STAMP, BF537-STAMP,
BF561-EZKIT), and Bluetechnix! Tinyboards.
The Blackfin architecture was jointly developed by Intel and Analog Devices
Inc. (ADI) as the Micro Signal Architecture (MSA) core and introduced it in
December of 2000. Since then ADI has put this core into its Blackfin
processor family of devices. The Blackfin core has the advantages of a clean,
orthogonal,RISC-like microprocessor instruction set. It combines a dual-MAC
(Multiply/Accumulate), state-of-the-art signal processing engine and
single-instruction, multiple-data (SIMD) multimedia capabilities into a single
instruction-set architecture.
The Blackfin architecture, including the instruction set, is described by the
ADSP-BF53x/BF56x Blackfin Processor Programming Reference
http://blackfin.uclinux.org/gf/download/frsrelease/29/2549/Blackfin_PRM.pdf
The Blackfin processor is already supported by major releases of gcc, and
there are binary and source rpms/tarballs for many architectures at:
http://blackfin.uclinux.org/gf/project/toolchain/frs There is complete
documentation, including "getting started" guides available at:
http://docs.blackfin.uclinux.org/ which provides links to the sources and
patches you will need in order to set up a cross-compiling environment for
bfin-linux-uclibc
This patch, as well as the other patches (toolchain, distribution,
uClibc) are actively supported by Analog Devices Inc, at:
http://blackfin.uclinux.org/
We have tested this on LTP, and our test plan (including pass/fails) can
be found at:
http://docs.blackfin.uclinux.org/doku.php?id=testing_the_linux_kernel
[m.kozlowski@tuxland.pl: balance parenthesis in blackfin header files]
Signed-off-by: Bryan Wu <bryan.wu@analog.com>
Signed-off-by: Mariusz Kozlowski <m.kozlowski@tuxland.pl>
Signed-off-by: Aubrey Li <aubrey.li@analog.com>
Signed-off-by: Jie Zhang <jie.zhang@analog.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-07 05:50:22 +08:00
|
|
|
release_mem_region(0xff610000, 0x4000);
|
2007-07-12 22:58:21 +08:00
|
|
|
release_instruction_a_sram:
|
blackfin architecture
This adds support for the Analog Devices Blackfin processor architecture, and
currently supports the BF533, BF532, BF531, BF537, BF536, BF534, and BF561
(Dual Core) devices, with a variety of development platforms including those
avaliable from Analog Devices (BF533-EZKit, BF533-STAMP, BF537-STAMP,
BF561-EZKIT), and Bluetechnix! Tinyboards.
The Blackfin architecture was jointly developed by Intel and Analog Devices
Inc. (ADI) as the Micro Signal Architecture (MSA) core and introduced it in
December of 2000. Since then ADI has put this core into its Blackfin
processor family of devices. The Blackfin core has the advantages of a clean,
orthogonal,RISC-like microprocessor instruction set. It combines a dual-MAC
(Multiply/Accumulate), state-of-the-art signal processing engine and
single-instruction, multiple-data (SIMD) multimedia capabilities into a single
instruction-set architecture.
The Blackfin architecture, including the instruction set, is described by the
ADSP-BF53x/BF56x Blackfin Processor Programming Reference
http://blackfin.uclinux.org/gf/download/frsrelease/29/2549/Blackfin_PRM.pdf
The Blackfin processor is already supported by major releases of gcc, and
there are binary and source rpms/tarballs for many architectures at:
http://blackfin.uclinux.org/gf/project/toolchain/frs There is complete
documentation, including "getting started" guides available at:
http://docs.blackfin.uclinux.org/ which provides links to the sources and
patches you will need in order to set up a cross-compiling environment for
bfin-linux-uclibc
This patch, as well as the other patches (toolchain, distribution,
uClibc) are actively supported by Analog Devices Inc, at:
http://blackfin.uclinux.org/
We have tested this on LTP, and our test plan (including pass/fails) can
be found at:
http://docs.blackfin.uclinux.org/doku.php?id=testing_the_linux_kernel
[m.kozlowski@tuxland.pl: balance parenthesis in blackfin header files]
Signed-off-by: Bryan Wu <bryan.wu@analog.com>
Signed-off-by: Mariusz Kozlowski <m.kozlowski@tuxland.pl>
Signed-off-by: Aubrey Li <aubrey.li@analog.com>
Signed-off-by: Jie Zhang <jie.zhang@analog.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-07 05:50:22 +08:00
|
|
|
release_mem_region(0xff600000, 0x4000);
|
2007-07-12 22:58:21 +08:00
|
|
|
exit:
|
blackfin architecture
This adds support for the Analog Devices Blackfin processor architecture, and
currently supports the BF533, BF532, BF531, BF537, BF536, BF534, and BF561
(Dual Core) devices, with a variety of development platforms including those
avaliable from Analog Devices (BF533-EZKit, BF533-STAMP, BF537-STAMP,
BF561-EZKIT), and Bluetechnix! Tinyboards.
The Blackfin architecture was jointly developed by Intel and Analog Devices
Inc. (ADI) as the Micro Signal Architecture (MSA) core and introduced it in
December of 2000. Since then ADI has put this core into its Blackfin
processor family of devices. The Blackfin core has the advantages of a clean,
orthogonal,RISC-like microprocessor instruction set. It combines a dual-MAC
(Multiply/Accumulate), state-of-the-art signal processing engine and
single-instruction, multiple-data (SIMD) multimedia capabilities into a single
instruction-set architecture.
The Blackfin architecture, including the instruction set, is described by the
ADSP-BF53x/BF56x Blackfin Processor Programming Reference
http://blackfin.uclinux.org/gf/download/frsrelease/29/2549/Blackfin_PRM.pdf
The Blackfin processor is already supported by major releases of gcc, and
there are binary and source rpms/tarballs for many architectures at:
http://blackfin.uclinux.org/gf/project/toolchain/frs There is complete
documentation, including "getting started" guides available at:
http://docs.blackfin.uclinux.org/ which provides links to the sources and
patches you will need in order to set up a cross-compiling environment for
bfin-linux-uclibc
This patch, as well as the other patches (toolchain, distribution,
uClibc) are actively supported by Analog Devices Inc, at:
http://blackfin.uclinux.org/
We have tested this on LTP, and our test plan (including pass/fails) can
be found at:
http://docs.blackfin.uclinux.org/doku.php?id=testing_the_linux_kernel
[m.kozlowski@tuxland.pl: balance parenthesis in blackfin header files]
Signed-off-by: Bryan Wu <bryan.wu@analog.com>
Signed-off-by: Mariusz Kozlowski <m.kozlowski@tuxland.pl>
Signed-off-by: Aubrey Li <aubrey.li@analog.com>
Signed-off-by: Jie Zhang <jie.zhang@analog.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-07 05:50:22 +08:00
|
|
|
return -ENOMEM;
|
|
|
|
}
|
|
|
|
|
|
|
|
void __exit bf561_coreb_exit(void)
|
|
|
|
{
|
|
|
|
device_remove_file(coreb_dev.this_device, &dev_attr_coreb_status);
|
|
|
|
misc_deregister(&coreb_dev);
|
|
|
|
|
|
|
|
release_mem_region(0xff610000, 0x4000);
|
|
|
|
release_mem_region(0xff600000, 0x4000);
|
|
|
|
release_mem_region(0xff500000, 0x8000);
|
|
|
|
release_mem_region(0xff400000, 0x8000);
|
|
|
|
|
|
|
|
free_dma(CH_MEM_STREAM2_DEST);
|
|
|
|
free_dma(CH_MEM_STREAM2_SRC);
|
|
|
|
}
|
|
|
|
|
|
|
|
module_init(bf561_coreb_init);
|
|
|
|
module_exit(bf561_coreb_exit);
|
|
|
|
|
|
|
|
MODULE_AUTHOR("Bas Vermeulen <bvermeul@blackstar.xs4all.nl>");
|
|
|
|
MODULE_DESCRIPTION("BF561 Core B Support");
|