OpenSDV
/
linux-stable-rt
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
linux-stable-rt/arch/arm/mach-shmobile/Kconfig

83 lines
1.7 KiB
Plaintext
Raw Normal View History

ARM: mach-shmobile: SH-Mobile G3 support. This adds preliminary support for the SH-Mobile G-series. The SH-Mobile G-series is a series of ARM/SH multi-core CPUs that aside from the ARM MPU are primarily composed of existing SH IP blocks. This includes initial support for the SH7367 (SH-Mobile G3) CPU and the G3EVM reference board. Only timer, serial console, and NOR flash are supported at this point. Patches for the interrupt controller, pinmux support, clock framework and runtime pm will be submitted as feature patches on top of this. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-02-05 19:14:49 +08:00
if ARCH_SHMOBILE
comment "SH-Mobile System Type"
config ARCH_SH7367
bool "SH-Mobile G3 (SH7367)"
select CPU_V6
select HAVE_CLK
select COMMON_CLKDEV
select GENERIC_TIME
select GENERIC_CLOCKEVENTS
ARM: mach-shmobile: SH-Mobile G4 support. This adds preliminary support for the SH7377 (SH-Mobile G4) CPU and the G4EVM reference board. Only timer, serial console and NOR flash are supported at this point. Support for the interrupt controller, pinmux support, clock framework and runtime pm will be submitted as feature patches on top of this. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-02-05 19:15:07 +08:00
config ARCH_SH7377
bool "SH-Mobile G4 (SH7377)"
select CPU_V7
select HAVE_CLK
select COMMON_CLKDEV
select GENERIC_TIME
select GENERIC_CLOCKEVENTS
ARM: mach-shmobile: SH-Mobile AP4 support. This adds preliminary support for the SH7372 (SH-Mobile AP4) CPU and the AP4EVB reference board. Only timer, serial console and NOR flash are supported at this point. Support for the interrupt controller, pinmux support, clock framework and runtime pm will be submitted as feature patches on top of this. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-02-05 19:14:58 +08:00
config ARCH_SH7372
bool "SH-Mobile AP4 (SH7372)"
select CPU_V7
select HAVE_CLK
select COMMON_CLKDEV
select GENERIC_TIME
select GENERIC_CLOCKEVENTS
ARM: mach-shmobile: SH-Mobile G3 support. This adds preliminary support for the SH-Mobile G-series. The SH-Mobile G-series is a series of ARM/SH multi-core CPUs that aside from the ARM MPU are primarily composed of existing SH IP blocks. This includes initial support for the SH7367 (SH-Mobile G3) CPU and the G3EVM reference board. Only timer, serial console, and NOR flash are supported at this point. Patches for the interrupt controller, pinmux support, clock framework and runtime pm will be submitted as feature patches on top of this. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-02-05 19:14:49 +08:00
comment "SH-Mobile Board Type"
config MACH_G3EVM
bool "G3EVM board"
depends on ARCH_SH7367
ARM: mach-shmobile: sh7367 and G3EVM pinmux support Add support for the sh7367 pinmux using drivers/sh/pfc.c and select serial console pins and some LEDs on G3EVM. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-02-10 19:10:55 +08:00
select ARCH_REQUIRE_GPIOLIB
ARM: mach-shmobile: SH-Mobile G3 support. This adds preliminary support for the SH-Mobile G-series. The SH-Mobile G-series is a series of ARM/SH multi-core CPUs that aside from the ARM MPU are primarily composed of existing SH IP blocks. This includes initial support for the SH7367 (SH-Mobile G3) CPU and the G3EVM reference board. Only timer, serial console, and NOR flash are supported at this point. Patches for the interrupt controller, pinmux support, clock framework and runtime pm will be submitted as feature patches on top of this. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-02-05 19:14:49 +08:00
ARM: mach-shmobile: SH-Mobile G4 support. This adds preliminary support for the SH7377 (SH-Mobile G4) CPU and the G4EVM reference board. Only timer, serial console and NOR flash are supported at this point. Support for the interrupt controller, pinmux support, clock framework and runtime pm will be submitted as feature patches on top of this. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-02-05 19:15:07 +08:00
config MACH_G4EVM
bool "G4EVM board"
depends on ARCH_SH7377
ARM: mach-shmobile: SH-Mobile AP4 support. This adds preliminary support for the SH7372 (SH-Mobile AP4) CPU and the AP4EVB reference board. Only timer, serial console and NOR flash are supported at this point. Support for the interrupt controller, pinmux support, clock framework and runtime pm will be submitted as feature patches on top of this. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-02-05 19:14:58 +08:00
config MACH_AP4EVB
bool "AP4EVB board"
depends on ARCH_SH7372
ARM: mach-shmobile: SH-Mobile G3 support. This adds preliminary support for the SH-Mobile G-series. The SH-Mobile G-series is a series of ARM/SH multi-core CPUs that aside from the ARM MPU are primarily composed of existing SH IP blocks. This includes initial support for the SH7367 (SH-Mobile G3) CPU and the G3EVM reference board. Only timer, serial console, and NOR flash are supported at this point. Patches for the interrupt controller, pinmux support, clock framework and runtime pm will be submitted as feature patches on top of this. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-02-05 19:14:49 +08:00
comment "SH-Mobile System Configuration"
menu "Memory configuration"
config MEMORY_START
hex "Physical memory start address"
default "0x50000000" if MACH_G3EVM
ARM: mach-shmobile: SH-Mobile G4 support. This adds preliminary support for the SH7377 (SH-Mobile G4) CPU and the G4EVM reference board. Only timer, serial console and NOR flash are supported at this point. Support for the interrupt controller, pinmux support, clock framework and runtime pm will be submitted as feature patches on top of this. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-02-05 19:15:07 +08:00
default "0x40000000" if MACH_G4EVM
ARM: mach-shmobile: SH-Mobile AP4 support. This adds preliminary support for the SH7372 (SH-Mobile AP4) CPU and the AP4EVB reference board. Only timer, serial console and NOR flash are supported at this point. Support for the interrupt controller, pinmux support, clock framework and runtime pm will be submitted as feature patches on top of this. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-02-05 19:14:58 +08:00
default "0x40000000" if MACH_AP4EVB
ARM: mach-shmobile: SH-Mobile G3 support. This adds preliminary support for the SH-Mobile G-series. The SH-Mobile G-series is a series of ARM/SH multi-core CPUs that aside from the ARM MPU are primarily composed of existing SH IP blocks. This includes initial support for the SH7367 (SH-Mobile G3) CPU and the G3EVM reference board. Only timer, serial console, and NOR flash are supported at this point. Patches for the interrupt controller, pinmux support, clock framework and runtime pm will be submitted as feature patches on top of this. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-02-05 19:14:49 +08:00
default "0x00000000"
---help---
Tweak this only when porting to a new machine which does not
already have a defconfig. Changing it from the known correct
value on any of the known systems will only lead to disaster.
config MEMORY_SIZE
hex "Physical memory size"
default "0x08000000" if MACH_G3EVM
ARM: mach-shmobile: SH-Mobile G4 support. This adds preliminary support for the SH7377 (SH-Mobile G4) CPU and the G4EVM reference board. Only timer, serial console and NOR flash are supported at this point. Support for the interrupt controller, pinmux support, clock framework and runtime pm will be submitted as feature patches on top of this. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-02-05 19:15:07 +08:00
default "0x08000000" if MACH_G4EVM
ARM: mach-shmobile: SH-Mobile AP4 support. This adds preliminary support for the SH7372 (SH-Mobile AP4) CPU and the AP4EVB reference board. Only timer, serial console and NOR flash are supported at this point. Support for the interrupt controller, pinmux support, clock framework and runtime pm will be submitted as feature patches on top of this. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-02-05 19:14:58 +08:00
default "0x10000000" if MACH_AP4EVB
ARM: mach-shmobile: SH-Mobile G3 support. This adds preliminary support for the SH-Mobile G-series. The SH-Mobile G-series is a series of ARM/SH multi-core CPUs that aside from the ARM MPU are primarily composed of existing SH IP blocks. This includes initial support for the SH7367 (SH-Mobile G3) CPU and the G3EVM reference board. Only timer, serial console, and NOR flash are supported at this point. Patches for the interrupt controller, pinmux support, clock framework and runtime pm will be submitted as feature patches on top of this. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-02-05 19:14:49 +08:00
default "0x04000000"
help
This sets the default memory size assumed by your kernel. It can
be overridden as normal by the 'mem=' argument on the kernel command
line.
endmenu
menu "Timer and clock configuration"
config SH_TIMER_CMT
bool "CMT timer driver"
default y
help
This enables build of the CMT timer driver.
endmenu
endif