2006-05-22 21:31:37 +08:00
|
|
|
Decoder firmware API description
|
|
|
|
|
================================
|
|
|
|
|
|
|
|
|
|
Note: this API is part of the decoder firmware, so it's cx23415 only.
|
|
|
|
|
|
|
|
|
|
-------------------------------------------------------------------------------
|
|
|
|
|
|
|
|
|
|
Name CX2341X_DEC_PING_FW
|
|
|
|
|
Enum 0/0x00
|
|
|
|
|
Description
|
|
|
|
|
This API call does nothing. It may be used to check if the firmware
|
|
|
|
|
is responding.
|
|
|
|
|
|
|
|
|
|
-------------------------------------------------------------------------------
|
|
|
|
|
|
|
|
|
|
Name CX2341X_DEC_START_PLAYBACK
|
|
|
|
|
Enum 1/0x01
|
|
|
|
|
Description
|
|
|
|
|
Begin or resume playback.
|
|
|
|
|
Param[0]
|
|
|
|
|
0 based frame number in GOP to begin playback from.
|
|
|
|
|
Param[1]
|
|
|
|
|
Specifies the number of muted audio frames to play before normal
|
|
|
|
|
audio resumes.
|
|
|
|
|
|
|
|
|
|
-------------------------------------------------------------------------------
|
|
|
|
|
|
|
|
|
|
Name CX2341X_DEC_STOP_PLAYBACK
|
|
|
|
|
Enum 2/0x02
|
|
|
|
|
Description
|
|
|
|
|
Ends playback and clears all decoder buffers. If PTS is not zero,
|
|
|
|
|
playback stops at specified PTS.
|
|
|
|
|
Param[0]
|
|
|
|
|
Display 0=last frame, 1=black
|
|
|
|
|
Param[1]
|
|
|
|
|
PTS low
|
|
|
|
|
Param[2]
|
|
|
|
|
PTS high
|
|
|
|
|
|
|
|
|
|
-------------------------------------------------------------------------------
|
|
|
|
|
|
|
|
|
|
Name CX2341X_DEC_SET_PLAYBACK_SPEED
|
|
|
|
|
Enum 3/0x03
|
|
|
|
|
Description
|
|
|
|
|
Playback stream at speed other than normal. There are two modes of
|
|
|
|
|
operation:
|
|
|
|
|
Smooth: host transfers entire stream and firmware drops unused
|
|
|
|
|
frames.
|
|
|
|
|
Coarse: host drops frames based on indexing as required to achieve
|
|
|
|
|
desired speed.
|
|
|
|
|
Param[0]
|
|
|
|
|
Bitmap:
|
|
|
|
|
0:7 0 normal
|
|
|
|
|
1 fast only "1.5 times"
|
|
|
|
|
n nX fast, 1/nX slow
|
|
|
|
|
30 Framedrop:
|
|
|
|
|
'0' during 1.5 times play, every other B frame is dropped
|
|
|
|
|
'1' during 1.5 times play, stream is unchanged (bitrate
|
|
|
|
|
must not exceed 8mbps)
|
|
|
|
|
31 Speed:
|
|
|
|
|
'0' slow
|
|
|
|
|
'1' fast
|
|
|
|
|
Param[1]
|
|
|
|
|
Direction: 0=forward, 1=reverse
|
|
|
|
|
Param[2]
|
|
|
|
|
Picture mask:
|
|
|
|
|
1=I frames
|
|
|
|
|
3=I, P frames
|
|
|
|
|
7=I, P, B frames
|
|
|
|
|
Param[3]
|
|
|
|
|
B frames per GOP (for reverse play only)
|
|
|
|
|
Param[4]
|
|
|
|
|
Mute audio: 0=disable, 1=enable
|
|
|
|
|
Param[5]
|
|
|
|
|
Display 0=frame, 1=field
|
|
|
|
|
Param[6]
|
|
|
|
|
Specifies the number of muted audio frames to play before normal audio
|
|
|
|
|
resumes.
|
|
|
|
|
|
|
|
|
|
-------------------------------------------------------------------------------
|
|
|
|
|
|
|
|
|
|
Name CX2341X_DEC_STEP_VIDEO
|
|
|
|
|
Enum 5/0x05
|
|
|
|
|
Description
|
|
|
|
|
Each call to this API steps the playback to the next unit defined below
|
|
|
|
|
in the current playback direction.
|
|
|
|
|
Param[0]
|
|
|
|
|
0=frame, 1=top field, 2=bottom field
|
|
|
|
|
|
|
|
|
|
-------------------------------------------------------------------------------
|
|
|
|
|
|
|
|
|
|
Name CX2341X_DEC_SET_DMA_BLOCK_SIZE
|
|
|
|
|
Enum 8/0x08
|
|
|
|
|
Description
|
|
|
|
|
Set DMA transfer block size. Counterpart to API 0xC9
|
|
|
|
|
Param[0]
|
|
|
|
|
DMA transfer block size in bytes. A different size may be specified
|
|
|
|
|
when issuing the DMA transfer command.
|
|
|
|
|
|
|
|
|
|
-------------------------------------------------------------------------------
|
|
|
|
|
|
|
|
|
|
Name CX2341X_DEC_GET_XFER_INFO
|
|
|
|
|
Enum 9/0x09
|
|
|
|
|
Description
|
|
|
|
|
This API call may be used to detect an end of stream condtion.
|
|
|
|
|
Result[0]
|
|
|
|
|
Stream type
|
|
|
|
|
Result[1]
|
|
|
|
|
Address offset
|
|
|
|
|
Result[2]
|
|
|
|
|
Maximum bytes to transfer
|
|
|
|
|
Result[3]
|
|
|
|
|
Buffer fullness
|
|
|
|
|
|
|
|
|
|
-------------------------------------------------------------------------------
|
|
|
|
|
|
|
|
|
|
Name CX2341X_DEC_GET_DMA_STATUS
|
|
|
|
|
Enum 10/0x0A
|
|
|
|
|
Description
|
|
|
|
|
Status of the last DMA transfer
|
|
|
|
|
Result[0]
|
|
|
|
|
Bit 1 set means transfer complete
|
|
|
|
|
Bit 2 set means DMA error
|
|
|
|
|
Bit 3 set means linked list error
|
|
|
|
|
Result[1]
|
|
|
|
|
DMA type: 0=MPEG, 1=OSD, 2=YUV
|
|
|
|
|
|
|
|
|
|
-------------------------------------------------------------------------------
|
|
|
|
|
|
|
|
|
|
Name CX2341X_DEC_SCHED_DMA_FROM_HOST
|
|
|
|
|
Enum 11/0x0B
|
|
|
|
|
Description
|
|
|
|
|
Setup DMA from host operation. Counterpart to API 0xCC
|
|
|
|
|
Param[0]
|
|
|
|
|
Memory address of link list
|
|
|
|
|
Param[1]
|
|
|
|
|
Total # of bytes to transfer
|
|
|
|
|
Param[2]
|
|
|
|
|
DMA type (0=MPEG, 1=OSD, 2=YUV)
|
|
|
|
|
|
|
|
|
|
-------------------------------------------------------------------------------
|
|
|
|
|
|
|
|
|
|
Name CX2341X_DEC_PAUSE_PLAYBACK
|
|
|
|
|
Enum 13/0x0D
|
|
|
|
|
Description
|
|
|
|
|
Freeze playback immediately. In this mode, when internal buffers are
|
|
|
|
|
full, no more data will be accepted and data request IRQs will be
|
|
|
|
|
masked.
|
|
|
|
|
Param[0]
|
|
|
|
|
Display: 0=last frame, 1=black
|
|
|
|
|
|
|
|
|
|
-------------------------------------------------------------------------------
|
|
|
|
|
|
|
|
|
|
Name CX2341X_DEC_HALT_FW
|
|
|
|
|
Enum 14/0x0E
|
|
|
|
|
Description
|
|
|
|
|
The firmware is halted and no further API calls are serviced until
|
|
|
|
|
the firmware is uploaded again.
|
|
|
|
|
|
|
|
|
|
-------------------------------------------------------------------------------
|
|
|
|
|
|
|
|
|
|
Name CX2341X_DEC_SET_STANDARD
|
|
|
|
|
Enum 16/0x10
|
|
|
|
|
Description
|
|
|
|
|
Selects display standard
|
|
|
|
|
Param[0]
|
|
|
|
|
0=NTSC, 1=PAL
|
|
|
|
|
|
|
|
|
|
-------------------------------------------------------------------------------
|
|
|
|
|
|
|
|
|
|
Name CX2341X_DEC_GET_VERSION
|
|
|
|
|
Enum 17/0x11
|
|
|
|
|
Description
|
|
|
|
|
Returns decoder firmware version information
|
|
|
|
|
Result[0]
|
|
|
|
|
Version bitmask:
|
|
|
|
|
Bits 0:15 build
|
|
|
|
|
Bits 16:23 minor
|
|
|
|
|
Bits 24:31 major
|
|
|
|
|
|
|
|
|
|
-------------------------------------------------------------------------------
|
|
|
|
|
|
|
|
|
|
Name CX2341X_DEC_SET_STREAM_INPUT
|
|
|
|
|
Enum 20/0x14
|
|
|
|
|
Description
|
|
|
|
|
Select decoder stream input port
|
|
|
|
|
Param[0]
|
|
|
|
|
0=memory (default), 1=streaming
|
|
|
|
|
|
|
|
|
|
-------------------------------------------------------------------------------
|
|
|
|
|
|
|
|
|
|
Name CX2341X_DEC_GET_TIMING_INFO
|
|
|
|
|
Enum 21/0x15
|
|
|
|
|
Description
|
|
|
|
|
Returns timing information from start of playback
|
|
|
|
|
Result[0]
|
|
|
|
|
Frame count by decode order
|
|
|
|
|
Result[1]
|
|
|
|
|
Video PTS bits 0:31 by display order
|
|
|
|
|
Result[2]
|
|
|
|
|
Video PTS bit 32 by display order
|
|
|
|
|
Result[3]
|
|
|
|
|
SCR bits 0:31 by display order
|
|
|
|
|
Result[4]
|
|
|
|
|
SCR bit 32 by display order
|
|
|
|
|
|
|
|
|
|
-------------------------------------------------------------------------------
|
|
|
|
|
|
|
|
|
|
Name CX2341X_DEC_SET_AUDIO_MODE
|
|
|
|
|
Enum 22/0x16
|
|
|
|
|
Description
|
|
|
|
|
Select audio mode
|
|
|
|
|
Param[0]
|
|
|
|
|
Dual mono mode action
|
|
|
|
|
Param[1]
|
|
|
|
|
Stereo mode action:
|
|
|
|
|
0=Stereo, 1=Left, 2=Right, 3=Mono, 4=Swap, -1=Unchanged
|
|
|
|
|
|
|
|
|
|
-------------------------------------------------------------------------------
|
|
|
|
|
|
|
|
|
|
Name CX2341X_DEC_SET_EVENT_NOTIFICATION
|
|
|
|
|
Enum 23/0x17
|
|
|
|
|
Description
|
|
|
|
|
Setup firmware to notify the host about a particular event.
|
|
|
|
|
Counterpart to API 0xD5
|
|
|
|
|
Param[0]
|
|
|
|
|
Event: 0=Audio mode change between stereo and dual channel
|
|
|
|
|
Param[1]
|
|
|
|
|
Notification 0=disabled, 1=enabled
|
|
|
|
|
Param[2]
|
|
|
|
|
Interrupt bit
|
|
|
|
|
Param[3]
|
|
|
|
|
Mailbox slot, -1 if no mailbox required.
|
|
|
|
|
|
|
|
|
|
-------------------------------------------------------------------------------
|
|
|
|
|
|
|
|
|
|
Name CX2341X_DEC_SET_DISPLAY_BUFFERS
|
|
|
|
|
Enum 24/0x18
|
|
|
|
|
Description
|
|
|
|
|
Number of display buffers. To decode all frames in reverse playback you
|
|
|
|
|
must use nine buffers.
|
|
|
|
|
Param[0]
|
|
|
|
|
0=six buffers, 1=nine buffers
|
|
|
|
|
|
|
|
|
|
-------------------------------------------------------------------------------
|
|
|
|
|
|
|
|
|
|
Name CX2341X_DEC_EXTRACT_VBI
|
|
|
|
|
Enum 25/0x19
|
|
|
|
|
Description
|
|
|
|
|
Extracts VBI data
|
|
|
|
|
Param[0]
|
|
|
|
|
0=extract from extension & user data, 1=extract from private packets
|
|
|
|
|
Result[0]
|
|
|
|
|
VBI table location
|
|
|
|
|
Result[1]
|
|
|
|
|
VBI table size
|
|
|
|
|
|
|
|
|
|
-------------------------------------------------------------------------------
|
|
|
|
|
|
|
|
|
|
Name CX2341X_DEC_SET_DECODER_SOURCE
|
|
|
|
|
Enum 26/0x1A
|
|
|
|
|
Description
|
|
|
|
|
Selects decoder source. Ensure that the parameters passed to this
|
|
|
|
|
API match the encoder settings.
|
|
|
|
|
Param[0]
|
|
|
|
|
Mode: 0=MPEG from host, 1=YUV from encoder, 2=YUV from host
|
|
|
|
|
Param[1]
|
|
|
|
|
YUV picture width
|
|
|
|
|
Param[2]
|
|
|
|
|
YUV picture height
|
|
|
|
|
Param[3]
|
|
|
|
|
Bitmap: see Param[0] of API 0xBD
|
|
|
|
|
|
|
|
|
|
-------------------------------------------------------------------------------
|
|
|
|
|
|
|
|
|
|
Name CX2341X_DEC_SET_AUDIO_OUTPUT
|
|
|
|
|
Enum 27/0x1B
|
|
|
|
|
Description
|
|
|
|
|
Select audio output format
|
|
|
|
|
Param[0]
|
|
|
|
|
Bitmask:
|
|
|
|
|
0:1 Data size:
|
2006-06-20 11:30:57 +08:00
|
|
|
'00' 16 bit
|
2006-05-22 21:31:37 +08:00
|
|
|
'01' 20 bit
|
|
|
|
|
'10' 24 bit
|
|
|
|
|
2:7 Unused
|
|
|
|
|
8:9 Mode:
|
|
|
|
|
'00' 2 channels
|
|
|
|
|
'01' 4 channels
|
|
|
|
|
'10' 6 channels
|
|
|
|
|
'11' 6 channels with one line data mode
|
|
|
|
|
(for left justified MSB first mode, 20 bit only)
|
|
|
|
|
10:11 Unused
|
|
|
|
|
12:13 Channel format:
|
2006-06-20 11:30:57 +08:00
|
|
|
'00' right justified MSB first mode
|
|
|
|
|
'01' left justified MSB first mode
|
|
|
|
|
'10' I2S mode
|
2006-05-22 21:31:37 +08:00
|
|
|
14:15 Unused
|
|
|
|
|
16:21 Right justify bit count
|
|
|
|
|
22:31 Unused
|
|
|
|
|
|
|
|
|
|
-------------------------------------------------------------------------------
|
|
|
|
|
|
|
|
|
|
Name CX2341X_DEC_SET_AV_DELAY
|
|
|
|
|
Enum 28/0x1C
|
|
|
|
|
Description
|
|
|
|
|
Set audio/video delay in 90Khz ticks
|
|
|
|
|
Param[0]
|
|
|
|
|
0=A/V in sync, negative=audio lags, positive=video lags
|
|
|
|
|
|
|
|
|
|
-------------------------------------------------------------------------------
|
|
|
|
|
|
|
|
|
|
Name CX2341X_DEC_SET_PREBUFFERING
|
|
|
|
|
Enum 30/0x1E
|
|
|
|
|
Description
|
|
|
|
|
Decoder prebuffering, when enabled up to 128KB are buffered for
|
|
|
|
|
streams <8mpbs or 640KB for streams >8mbps
|
|
|
|
|
Param[0]
|
|
|
|
|
0=off, 1=on
|
