linux-stable-rt/include/asm-x86/smp.h

209 lines
5.0 KiB
C
Raw Normal View History

#ifndef _ASM_X86_SMP_H_
#define _ASM_X86_SMP_H_
#ifndef __ASSEMBLY__
#include <linux/cpumask.h>
#include <linux/init.h>
#include <asm/percpu.h>
/*
* We need the APIC definitions automatically as part of 'smp.h'
*/
#ifdef CONFIG_X86_LOCAL_APIC
# include <asm/mpspec.h>
# include <asm/apic.h>
# ifdef CONFIG_X86_IO_APIC
# include <asm/io_apic.h>
# endif
#endif
#include <asm/pda.h>
#include <asm/thread_info.h>
extern cpumask_t cpu_callout_map;
extern cpumask_t cpu_initialized;
extern cpumask_t cpu_callin_map;
extern void (*mtrr_hook)(void);
extern void zap_low_mappings(void);
extern int smp_num_siblings;
extern unsigned int num_processors;
extern cpumask_t cpu_initialized;
#ifdef CONFIG_SMP
extern u16 x86_cpu_to_apicid_init[];
extern u16 x86_bios_cpu_apicid_init[];
extern void *x86_cpu_to_apicid_early_ptr;
extern void *x86_bios_cpu_apicid_early_ptr;
#else
#define x86_cpu_to_apicid_early_ptr NULL
#define x86_bios_cpu_apicid_early_ptr NULL
#endif
DECLARE_PER_CPU(cpumask_t, cpu_sibling_map);
DECLARE_PER_CPU(cpumask_t, cpu_core_map);
DECLARE_PER_CPU(u16, cpu_llc_id);
DECLARE_PER_CPU(u16, x86_cpu_to_apicid);
DECLARE_PER_CPU(u16, x86_bios_cpu_apicid);
/* Static state in head.S used to set up a CPU */
extern struct {
void *sp;
unsigned short ss;
} stack_start;
struct smp_ops {
void (*smp_prepare_boot_cpu)(void);
void (*smp_prepare_cpus)(unsigned max_cpus);
int (*cpu_up)(unsigned cpu);
void (*smp_cpus_done)(unsigned max_cpus);
void (*smp_send_stop)(void);
void (*smp_send_reschedule)(int cpu);
int (*smp_call_function_mask)(cpumask_t mask,
void (*func)(void *info), void *info,
int wait);
};
/* Globals due to paravirt */
extern void set_cpu_sibling_map(int cpu);
#ifdef CONFIG_SMP
#ifndef CONFIG_PARAVIRT
#define startup_ipi_hook(phys_apicid, start_eip, start_esp) do { } while (0)
#endif
extern struct smp_ops smp_ops;
static inline void smp_send_stop(void)
{
smp_ops.smp_send_stop();
}
static inline void smp_prepare_boot_cpu(void)
{
smp_ops.smp_prepare_boot_cpu();
}
static inline void smp_prepare_cpus(unsigned int max_cpus)
{
smp_ops.smp_prepare_cpus(max_cpus);
}
static inline void smp_cpus_done(unsigned int max_cpus)
{
smp_ops.smp_cpus_done(max_cpus);
}
static inline int __cpu_up(unsigned int cpu)
{
return smp_ops.cpu_up(cpu);
}
static inline void smp_send_reschedule(int cpu)
{
smp_ops.smp_send_reschedule(cpu);
}
static inline int smp_call_function_mask(cpumask_t mask,
void (*func) (void *info), void *info,
int wait)
{
return smp_ops.smp_call_function_mask(mask, func, info, wait);
}
void native_smp_prepare_boot_cpu(void);
void native_smp_prepare_cpus(unsigned int max_cpus);
void native_smp_cpus_done(unsigned int max_cpus);
int native_cpu_up(unsigned int cpunum);
extern int __cpu_disable(void);
extern void __cpu_die(unsigned int cpu);
extern void prefill_possible_map(void);
void smp_store_cpu_info(int id);
#define cpu_physical_id(cpu) per_cpu(x86_cpu_to_apicid, cpu)
/* We don't mark CPUs online until __cpu_up(), so we need another measure */
static inline int num_booting_cpus(void)
{
return cpus_weight(cpu_callout_map);
}
#endif /* CONFIG_SMP */
extern unsigned disabled_cpus __cpuinitdata;
#ifdef CONFIG_X86_32_SMP
/*
* This function is needed by all SMP systems. It must _always_ be valid
* from the initial startup. We map APIC_BASE very early in page_setup(),
* so this is correct in the x86 case.
*/
DECLARE_PER_CPU(int, cpu_number);
#define raw_smp_processor_id() (x86_read_percpu(cpu_number))
extern int safe_smp_processor_id(void);
#elif defined(CONFIG_X86_64_SMP)
#define raw_smp_processor_id() read_pda(cpunumber)
#define stack_smp_processor_id() \
({ \
struct thread_info *ti; \
__asm__("andq %%rsp,%0; ":"=r" (ti) : "0" (CURRENT_MASK)); \
ti->cpu; \
})
#define safe_smp_processor_id() smp_processor_id()
#else /* !CONFIG_X86_32_SMP && !CONFIG_X86_64_SMP */
#define cpu_physical_id(cpu) boot_cpu_physical_apicid
#define safe_smp_processor_id() 0
#define stack_smp_processor_id() 0
#endif
#ifdef CONFIG_X86_LOCAL_APIC
static inline int logical_smp_processor_id(void)
{
/* we don't want to mark this access volatile - bad code generation */
return GET_APIC_LOGICAL_ID(*(u32 *)(APIC_BASE + APIC_LDR));
}
#ifndef CONFIG_X86_64
static inline unsigned int read_apic_id(void)
{
return *(u32 *)(APIC_BASE + APIC_ID);
}
x86: support for new UV apic UV supports really big systems. So big, in fact, that the APICID register does not contain enough bits to contain an APICID that is unique across all cpus. The UV BIOS supports 3 APICID modes: - legacy mode. This mode uses the old APIC mode where APICID is in bits [31:24] of the APICID register. - x2apic mode. This mode is whitebox-compatible. APICIDs are unique across all cpus. Standard x2apic APIC operations (Intel-defined) can be used for IPIs. The node identifier fits within the Intel-defined portion of the APICID register. - x2apic-uv mode. In this mode, the APICIDs on each node have unique IDs, but IDs on different node are not unique. For example, if each mode has 32 cpus, the APICIDs on each node might be 0 - 31. Every node has the same set of IDs. The UV hub is used to route IPIs/interrupts to the correct node. Traditional APIC operations WILL NOT WORK. In x2apic-uv mode, the ACPI tables all contain a full unique ID (note: exact bit layout still changing but the following is close): nnnnnnnnnnlc0cch n = unique node number l = socket number on board c = core h = hyperthread Only the "lc0cch" bits are written to the APICID register. The remaining bits are supplied by having the get_apic_id() function "OR" the extra bits into the value read from the APICID register. (Hmmm.. why not keep the ENTIRE APICID register in per-cpu data....) The x2apic-uv mode is recognized by the MADT table containing: oem_id = "SGI" oem_table_id = "UV-X" Signed-off-by: Jack Steiner <steiner@sgi.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-03-29 03:12:16 +08:00
#else
extern unsigned int read_apic_id(void);
#endif
# ifdef APIC_DEFINITION
extern int hard_smp_processor_id(void);
# else
# include <mach_apicdef.h>
static inline int hard_smp_processor_id(void)
{
/* we don't want to mark this access volatile - bad code generation */
return GET_APIC_ID(read_apic_id());
}
# endif /* APIC_DEFINITION */
#else /* CONFIG_X86_LOCAL_APIC */
# ifndef CONFIG_SMP
# define hard_smp_processor_id() 0
# endif
#endif /* CONFIG_X86_LOCAL_APIC */
#ifdef CONFIG_HOTPLUG_CPU
extern void cpu_exit_clear(void);
extern void cpu_uninit(void);
#endif
extern void smp_alloc_memory(void);
extern void lock_ipi_call_lock(void);
extern void unlock_ipi_call_lock(void);
#endif /* __ASSEMBLY__ */
#endif