linux-stable-rt/arch/um/sys-x86/shared/sysdep/ptrace_64.h

164 lines
4.5 KiB
C
Raw Normal View History

/*
* Copyright 2003 PathScale, Inc.
uml: throw out CONFIG_MODE_TT This patchset throws out tt mode, which has been non-functional for a while. This is done in phases, interspersed with code cleanups on the affected files. The removal is done as follows: remove all code, config options, and files which depend on CONFIG_MODE_TT get rid of the CHOOSE_MODE macro, which decided whether to call tt-mode or skas-mode code, and replace invocations with their skas portions replace all now-trivial procedures with their skas equivalents There are now a bunch of now-redundant pieces of data structures, including mode-specific pieces of the thread structure, pt_regs, and mm_context. These are all replaced with their skas-specific contents. As part of the ongoing style compliance project, I made a style pass over all files that were changed. There are three such patches, one for each phase, covering the files affected by that phase but no later ones. I noticed that we weren't freeing the LDT state associated with a process when it exited, so that's fixed in one of the later patches. The last patch is a tidying patch which I've had for a while, but which caused inexplicable crashes under tt mode. Since that is no longer a problem, this can now go in. This patch: Start getting rid of tt mode support. This patch throws out CONFIG_MODE_TT and all config options, code, and files which depend on it. CONFIG_MODE_SKAS is gone and everything that depends on it is included unconditionally. The few changed lines are in re-written Kconfig help, lines which needed something skas-related removed from them, and a few more which weren't strictly deletions. Signed-off-by: Jeff Dike <jdike@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-16 16:26:50 +08:00
* Copyright (C) 2003 - 2007 Jeff Dike (jdike@{addtoit,linux.intel}.com)
*
* Licensed under the GPL
*/
#ifndef __SYSDEP_X86_64_PTRACE_H
#define __SYSDEP_X86_64_PTRACE_H
#include <generated/user_constants.h>
[PATCH] uml: S390 preparation, abstract host page fault data This patch removes the arch-specific fault/trap-infos from thread and skas-regs. It adds a new struct faultinfo, that is arch-specific defined in sysdep/faultinfo.h. The structure is inserted in thread.arch and thread.regs.skas and thread.regs.tt Now, segv and other trap-handlers can copy the contents from regs.X.faultinfo to thread.arch.faultinfo with one simple assignment. Also, the number of macros necessary is reduced to FAULT_ADDRESS(struct faultinfo) extracts the faulting address from faultinfo FAULT_WRITE(struct faultinfo) extracts the "is_write" flag SEGV_IS_FIXABLE(struct faultinfo) is true for the fixable segvs, i.e. (TRAP == 14) on i386 UPT_FAULTINFO(regs) result is (struct faultinfo *) to the faultinfo in regs->skas.faultinfo GET_FAULTINFO_FROM_SC(struct faultinfo, struct sigcontext *) copies the relevant parts of the sigcontext to struct faultinfo. On SIGSEGV, call user_signal() instead of handle_segv(), if the architecture provides the information needed in PTRACE_FAULTINFO, or if PTRACE_FAULTINFO is missing, because segv-stub will provide the info. The benefit of the change is, that in case of a non-fixable SIGSEGV, we can give user processes a SIGSEGV, instead of possibly looping on pagefault handling. Since handle_segv() sikked arch_fixup() implicitly by passing ip==0 to segv(), I changed segv() to call arch_fixup() only, if !is_user. Signed-off-by: Bodo Stroesser <bstroesser@fujitsu-siemens.com> Signed-off-by: Jeff Dike <jdike@addtoit.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-05-06 07:15:31 +08:00
#include "sysdep/faultinfo.h"
#define MAX_REG_OFFSET (UM_FRAME_SIZE)
#define MAX_REG_NR ((MAX_REG_OFFSET) / sizeof(unsigned long))
#define REGS_IP(r) ((r)[HOST_IP])
#define REGS_SP(r) ((r)[HOST_SP])
#define REGS_RBX(r) ((r)[HOST_RBX])
#define REGS_RCX(r) ((r)[HOST_RCX])
#define REGS_RDX(r) ((r)[HOST_RDX])
#define REGS_RSI(r) ((r)[HOST_RSI])
#define REGS_RDI(r) ((r)[HOST_RDI])
#define REGS_RBP(r) ((r)[HOST_RBP])
#define REGS_RAX(r) ((r)[HOST_RAX])
#define REGS_R8(r) ((r)[HOST_R8])
#define REGS_R9(r) ((r)[HOST_R9])
#define REGS_R10(r) ((r)[HOST_R10])
#define REGS_R11(r) ((r)[HOST_R11])
#define REGS_R12(r) ((r)[HOST_R12])
#define REGS_R13(r) ((r)[HOST_R13])
#define REGS_R14(r) ((r)[HOST_R14])
#define REGS_R15(r) ((r)[HOST_R15])
#define REGS_CS(r) ((r)[HOST_CS])
#define REGS_EFLAGS(r) ((r)[HOST_EFLAGS])
#define REGS_SS(r) ((r)[HOST_SS])
#define HOST_FS_BASE 21
#define HOST_GS_BASE 22
#define HOST_DS 23
#define HOST_ES 24
#define HOST_FS 25
#define HOST_GS 26
/* Also defined in asm/ptrace-x86_64.h, but not in libc headers. So, these
* are already defined for kernel code, but not for userspace code.
*/
#ifndef FS_BASE
/* These aren't defined in ptrace.h, but exist in struct user_regs_struct,
* which is what x86_64 ptrace actually uses.
*/
#define FS_BASE (HOST_FS_BASE * sizeof(long))
#define GS_BASE (HOST_GS_BASE * sizeof(long))
#define DS (HOST_DS * sizeof(long))
#define ES (HOST_ES * sizeof(long))
#define FS (HOST_FS * sizeof(long))
#define GS (HOST_GS * sizeof(long))
#endif
#define REGS_FS_BASE(r) ((r)[HOST_FS_BASE])
#define REGS_GS_BASE(r) ((r)[HOST_GS_BASE])
#define REGS_DS(r) ((r)[HOST_DS])
#define REGS_ES(r) ((r)[HOST_ES])
#define REGS_FS(r) ((r)[HOST_FS])
#define REGS_GS(r) ((r)[HOST_GS])
#define REGS_ORIG_RAX(r) ((r)[HOST_ORIG_RAX])
#define REGS_SET_SYSCALL_RETURN(r, res) REGS_RAX(r) = (res)
#define REGS_RESTART_SYSCALL(r) IP_RESTART_SYSCALL(REGS_IP(r))
#define REGS_SEGV_IS_FIXABLE(r) SEGV_IS_FIXABLE((r)->trap_type)
#define REGS_FAULT_ADDR(r) ((r)->fault_addr)
#define REGS_FAULT_WRITE(r) FAULT_WRITE((r)->fault_type)
#define REGS_TRAP(r) ((r)->trap_type)
#define REGS_ERR(r) ((r)->fault_type)
struct uml_pt_regs {
unsigned long gp[MAX_REG_NR];
unsigned long fp[HOST_FP_SIZE];
struct faultinfo faultinfo;
long syscall;
int is_user;
};
#define EMPTY_UML_PT_REGS { }
#define UPT_RBX(r) REGS_RBX((r)->gp)
#define UPT_RCX(r) REGS_RCX((r)->gp)
#define UPT_RDX(r) REGS_RDX((r)->gp)
#define UPT_RSI(r) REGS_RSI((r)->gp)
#define UPT_RDI(r) REGS_RDI((r)->gp)
#define UPT_RBP(r) REGS_RBP((r)->gp)
#define UPT_RAX(r) REGS_RAX((r)->gp)
#define UPT_R8(r) REGS_R8((r)->gp)
#define UPT_R9(r) REGS_R9((r)->gp)
#define UPT_R10(r) REGS_R10((r)->gp)
#define UPT_R11(r) REGS_R11((r)->gp)
#define UPT_R12(r) REGS_R12((r)->gp)
#define UPT_R13(r) REGS_R13((r)->gp)
#define UPT_R14(r) REGS_R14((r)->gp)
#define UPT_R15(r) REGS_R15((r)->gp)
#define UPT_CS(r) REGS_CS((r)->gp)
#define UPT_FS_BASE(r) REGS_FS_BASE((r)->gp)
#define UPT_FS(r) REGS_FS((r)->gp)
#define UPT_GS_BASE(r) REGS_GS_BASE((r)->gp)
#define UPT_GS(r) REGS_GS((r)->gp)
#define UPT_DS(r) REGS_DS((r)->gp)
#define UPT_ES(r) REGS_ES((r)->gp)
#define UPT_CS(r) REGS_CS((r)->gp)
#define UPT_SS(r) REGS_SS((r)->gp)
#define UPT_ORIG_RAX(r) REGS_ORIG_RAX((r)->gp)
#define UPT_IP(r) REGS_IP((r)->gp)
#define UPT_SP(r) REGS_SP((r)->gp)
#define UPT_EFLAGS(r) REGS_EFLAGS((r)->gp)
#define UPT_SYSCALL_NR(r) ((r)->syscall)
#define UPT_SYSCALL_RET(r) UPT_RAX(r)
extern int user_context(unsigned long sp);
#define UPT_IS_USER(r) ((r)->is_user)
#define UPT_SYSCALL_ARG1(r) UPT_RDI(r)
#define UPT_SYSCALL_ARG2(r) UPT_RSI(r)
#define UPT_SYSCALL_ARG3(r) UPT_RDX(r)
#define UPT_SYSCALL_ARG4(r) UPT_R10(r)
#define UPT_SYSCALL_ARG5(r) UPT_R8(r)
#define UPT_SYSCALL_ARG6(r) UPT_R9(r)
struct syscall_args {
unsigned long args[6];
};
#define SYSCALL_ARGS(r) ((struct syscall_args) \
{ .args = { UPT_SYSCALL_ARG1(r), \
UPT_SYSCALL_ARG2(r), \
UPT_SYSCALL_ARG3(r), \
UPT_SYSCALL_ARG4(r), \
UPT_SYSCALL_ARG5(r), \
UPT_SYSCALL_ARG6(r) } } )
#define UPT_SET_SYSCALL_RETURN(r, res) \
REGS_SET_SYSCALL_RETURN((r)->regs, (res))
#define UPT_RESTART_SYSCALL(r) REGS_RESTART_SYSCALL((r)->gp)
#define UPT_SEGV_IS_FIXABLE(r) REGS_SEGV_IS_FIXABLE(&r->skas)
#define UPT_FAULTINFO(r) (&(r)->faultinfo)
static inline void arch_init_registers(int pid)
{
}
#endif