OpenSDV
/
linux-stable-rt
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
linux-stable-rt/drivers/pci/hotplug/shpchp.h

462 lines
14 KiB
C
Raw Normal View History

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
/*
* Standard Hot Plug Controller Driver
*
* Copyright (C) 1995,2001 Compaq Computer Corporation
* Copyright (C) 2001 Greg Kroah-Hartman (greg@kroah.com)
* Copyright (C) 2001 IBM
* Copyright (C) 2003-2004 Intel Corporation
*
* All rights reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or (at
* your option) any later version.
*
* This program is distributed in the hope that it will be useful, but
* WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
* NON INFRINGEMENT. See the GNU General Public License for more
* details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*
[PATCH] PCI Hotplug: new contact info Signed-off-by: Kristen Carlson Accardi <kristen.c.accardi@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-08-17 06:16:10 +08:00
* Send feedback to <greg@kroah.com>,<kristen.c.accardi@intel.com>
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
*
*/
#ifndef _SHPCHP_H
#define _SHPCHP_H
#include <linux/types.h>
#include <linux/pci.h>
#include <linux/delay.h>
[PATCH] fix missing includes I recently picked up my older work to remove unnecessary #includes of sched.h, starting from a patch by Dave Jones to not include sched.h from module.h. This reduces the number of indirect includes of sched.h by ~300. Another ~400 pointless direct includes can be removed after this disentangling (patch to follow later). However, quite a few indirect includes need to be fixed up for this. In order to feed the patches through -mm with as little disturbance as possible, I've split out the fixes I accumulated up to now (complete for i386 and x86_64, more archs to follow later) and post them before the real patch. This way this large part of the patch is kept simple with only adding #includes, and all hunks are independent of each other. So if any hunk rejects or gets in the way of other patches, just drop it. My scripts will pick it up again in the next round. Signed-off-by: Tim Schmielau <tim@physik3.uni-rostock.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-31 07:03:48 +08:00
#include <linux/sched.h> /* signal_pending(), struct timer_list */
[PATCH] PCI hotplug: convert semaphores to mutex semaphore to mutex conversion. the conversion was generated via scripts, and the result was validated automatically via a script as well. build tested with allyesconfig. Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-01-13 23:02:15 +08:00
#include <linux/mutex.h>
[PATCH] fix missing includes I recently picked up my older work to remove unnecessary #includes of sched.h, starting from a patch by Dave Jones to not include sched.h from module.h. This reduces the number of indirect includes of sched.h by ~300. Another ~400 pointless direct includes can be removed after this disentangling (patch to follow later). However, quite a few indirect includes need to be fixed up for this. In order to feed the patches through -mm with as little disturbance as possible, I've split out the fixes I accumulated up to now (complete for i386 and x86_64, more archs to follow later) and post them before the real patch. This way this large part of the patch is kept simple with only adding #includes, and all hunks are independent of each other. So if any hunk rejects or gets in the way of other patches, just drop it. My scripts will pick it up again in the next round. Signed-off-by: Tim Schmielau <tim@physik3.uni-rostock.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-31 07:03:48 +08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
#include "pci_hotplug.h"
#if !defined(MODULE)
#define MY_NAME "shpchp"
#else
#define MY_NAME THIS_MODULE->name
#endif
extern int shpchp_poll_mode;
extern int shpchp_poll_time;
extern int shpchp_debug;
/*#define dbg(format, arg...) do { if (shpchp_debug) printk(KERN_DEBUG "%s: " format, MY_NAME , ## arg); } while (0)*/
#define dbg(format, arg...) do { if (shpchp_debug) printk("%s: " format, MY_NAME , ## arg); } while (0)
#define err(format, arg...) printk(KERN_ERR "%s: " format, MY_NAME , ## arg)
#define info(format, arg...) printk(KERN_INFO "%s: " format, MY_NAME , ## arg)
#define warn(format, arg...) printk(KERN_WARNING "%s: " format, MY_NAME , ## arg)
struct slot {
u8 bus;
u8 device;
[PATCH] shpchp: remove redundant data structures State information is currently stored in per-slot as well as per-pci-function data structures in shpchp. There's a lot of overlap in the information kept, and some of it is never used. This patch consolidates the state information to per-slot and eliminates unused data structures. The biggest change is to eliminate the pci_func structure and the code around managing its lists. Signed-off-by: Rajesh Shah <rajesh.shah@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-10-14 03:05:41 +08:00
u16 status;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
u32 number;
u8 is_a_board;
u8 state;
u8 presence_save;
[PATCH] shpchp: remove redundant data structures State information is currently stored in per-slot as well as per-pci-function data structures in shpchp. There's a lot of overlap in the information kept, and some of it is never used. This patch consolidates the state information to per-slot and eliminates unused data structures. The biggest change is to eliminate the pci_func structure and the code around managing its lists. Signed-off-by: Rajesh Shah <rajesh.shah@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-10-14 03:05:41 +08:00
u8 pwr_save;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
struct timer_list task_event;
u8 hp_slot;
struct controller *ctrl;
struct hpc_ops *hpc_ops;
struct hotplug_slot *hotplug_slot;
struct list_head slot_list;
};
struct event_info {
u32 event_type;
u8 hp_slot;
};
struct controller {
[PATCH] shpchp - cleanup controller list This patch changes SHPCHP driver to use list_head structure for managing controller list. Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-01-26 08:58:30 +08:00
struct list_head ctrl_list;
[PATCH] PCI hotplug: convert semaphores to mutex semaphore to mutex conversion. the conversion was generated via scripts, and the result was validated automatically via a script as well. build tested with allyesconfig. Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-01-13 23:02:15 +08:00
struct mutex crit_sect; /* critical section mutex */
[PATCH] shpchp - cleanup check command status This patch cleanups codes that check the command status. For this, it introduces a new semaphore "cmd_sem" for each controller. Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-01-26 08:59:24 +08:00
struct mutex cmd_lock; /* command lock */
[PATCH] shpchp: miscellaneous cleanups Remove un-necessary header includes, remove dead code, remove some type casts, receive function return in the correct data type... Signed-off-by: Rajesh Shah <rajesh.shah@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-10-14 03:05:42 +08:00
struct php_ctlr_state_s *hpc_ctlr_handle; /* HPC controller handle */
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
int num_slots; /* Number of slots on ctlr */
int slot_num_inc; /* 1 or -1 */
struct pci_dev *pci_dev;
struct pci_bus *pci_bus;
struct event_info event_queue[10];
[PATCH] shpchp - cleanup slot list This patch changes SHPCHP driver to use list_head structure for managing slot list. Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-01-26 08:57:40 +08:00
struct list_head slot_list;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
struct hpc_ops *hpc_ops;
wait_queue_head_t queue; /* sleep & wake process */
u8 next_event;
u8 bus;
u8 device;
u8 function;
u8 slot_device_offset;
u8 add_support;
[PATCH] PCI Hotplug: shpchp: AMD POGO errata fix This patch fixes the AMD POGO errata on the hotplug controller where the platform will lock up or reboot if PERR/SERR generation is enabled and a slot is sent an enable command. This fix disables PERR/SERR generation before a slot is sent the enable command by first saving related registers, turning off SERR/PERR generation, enabling the slot, then restoring the registers. Signed-off-by: David Keck <david.keck@amd.com> Cc: Kristen Accardi <kristen.c.accardi@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-01-17 05:22:36 +08:00
u32 pcix_misc2_reg; /* for amd pogo errata */
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
enum pci_bus_speed speed;
u32 first_slot; /* First physical slot number */
u8 slot_bus; /* Bus where the slots handled by this controller sit */
[PATCH] shpchp: fix improper mmio mapping Current SHPCHP driver seems not to map MMIO region properly. This patch fixes this bug. This patch also cleanup the code. Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-11-24 10:36:59 +08:00
u32 cap_offset;
unsigned long mmio_base;
unsigned long mmio_size;
[PATCH] shpchp: fix improper wait for command completion Current SHPCHP driver uses msleep_interruptible() function to wait for a command completion event. But I think this would cause an unnecessary long wait until timeout, if command completion interrupt came before task state was changed to TASK_INTERRUPTIBLE. This patch fixes this issue. With this patch, command completion becomes faster as follows: o Without this patch # time echo 1 > power real 0m4.708s user 0m0.000s sys 0m0.524s o With this patch # time echo 1 > power real 0m2.221s user 0m0.000s sys 0m0.532s Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-11-25 11:28:53 +08:00
volatile int cmd_busy;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
};
[PATCH] shpchp: reduce dependence on ACPI Reduce the SHPC hotplug driver's dependence on ACPI. We don't walk the acpi namespace anymore to build a list of bridges and devices. The remaining interaction with ACPI is to run the _OSHP method to transition control of hotplug hardware from system BIOS to the shpc hotplug driver, and to run the _HPP method to get hotplug device parameters like cache line size, latency timer and SERR/PERR enable from BIOS. Note that one of the side effects of this patch is that shpchp does not enable the hot-added device or its DMA bus mastering automatically now. It expects the device driver to do that. This may break some drivers and we will have to fix them as they are reported. Signed-off-by: Rajesh Shah <rajesh.shah@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-10-14 03:05:38 +08:00
struct hotplug_params {
u8 cache_line_size;
u8 latency_timer;
u8 enable_serr;
u8 enable_perr;
};
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
/* Define AMD SHPC ID */
#define PCI_DEVICE_ID_AMD_GOLAM_7450 0x7450
[PATCH] PCI Hotplug: shpchp: AMD POGO errata fix This patch fixes the AMD POGO errata on the hotplug controller where the platform will lock up or reboot if PERR/SERR generation is enabled and a slot is sent an enable command. This fix disables PERR/SERR generation before a slot is sent the enable command by first saving related registers, turning off SERR/PERR generation, enabling the slot, then restoring the registers. Signed-off-by: David Keck <david.keck@amd.com> Cc: Kristen Accardi <kristen.c.accardi@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-01-17 05:22:36 +08:00
#define PCI_DEVICE_ID_AMD_POGO_7458 0x7458
/* AMD PCIX bridge registers */
#define PCIX_MEM_BASE_LIMIT_OFFSET 0x1C
#define PCIX_MISCII_OFFSET 0x48
#define PCIX_MISC_BRIDGE_ERRORS_OFFSET 0x80
/* AMD PCIX_MISCII masks and offsets */
#define PERRNONFATALENABLE_MASK 0x00040000
#define PERRFATALENABLE_MASK 0x00080000
#define PERRFLOODENABLE_MASK 0x00100000
#define SERRNONFATALENABLE_MASK 0x00200000
#define SERRFATALENABLE_MASK 0x00400000
/* AMD PCIX_MISC_BRIDGE_ERRORS masks and offsets */
#define PERR_OBSERVED_MASK 0x00000001
/* AMD PCIX_MEM_BASE_LIMIT masks */
#define RSE_MASK 0x40000000
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
#define INT_BUTTON_IGNORE 0
#define INT_PRESENCE_ON 1
#define INT_PRESENCE_OFF 2
#define INT_SWITCH_CLOSE 3
#define INT_SWITCH_OPEN 4
#define INT_POWER_FAULT 5
#define INT_POWER_FAULT_CLEAR 6
#define INT_BUTTON_PRESS 7
#define INT_BUTTON_RELEASE 8
#define INT_BUTTON_CANCEL 9
#define STATIC_STATE 0
#define BLINKINGON_STATE 1
#define BLINKINGOFF_STATE 2
#define POWERON_STATE 3
#define POWEROFF_STATE 4
#define PCI_TO_PCI_BRIDGE_CLASS 0x00060400
/* Error messages */
#define INTERLOCK_OPEN 0x00000002
#define ADD_NOT_SUPPORTED 0x00000003
#define CARD_FUNCTIONING 0x00000005
#define ADAPTER_NOT_SAME 0x00000006
#define NO_ADAPTER_PRESENT 0x00000009
#define NOT_ENOUGH_RESOURCES 0x0000000B
#define DEVICE_TYPE_NOT_SUPPORTED 0x0000000C
#define WRONG_BUS_FREQUENCY 0x0000000D
#define POWER_FAILURE 0x0000000E
#define REMOVE_NOT_SUPPORTED 0x00000003
#define DISABLE_CARD 1
/*
* error Messages
*/
#define msg_initialization_err "Initialization failure, error=%d\n"
#define msg_button_on "PCI slot #%d - powering on due to button press.\n"
#define msg_button_off "PCI slot #%d - powering off due to button press.\n"
#define msg_button_cancel "PCI slot #%d - action canceled due to button press.\n"
/* sysfs functions for the hotplug controller info */
extern void shpchp_create_ctrl_files (struct controller *ctrl);
/* controller functions */
extern int shpchp_event_start_thread(void);
extern void shpchp_event_stop_thread(void);
extern int shpchp_enable_slot(struct slot *slot);
extern int shpchp_disable_slot(struct slot *slot);
extern u8 shpchp_handle_attention_button(u8 hp_slot, void *inst_id);
extern u8 shpchp_handle_switch_change(u8 hp_slot, void *inst_id);
extern u8 shpchp_handle_presence_change(u8 hp_slot, void *inst_id);
extern u8 shpchp_handle_power_fault(u8 hp_slot, void *inst_id);
/* pci functions */
extern int shpchp_save_config(struct controller *ctrl, int busnumber, int num_ctlr_slots, int first_device_num);
[PATCH] shpchp: use the PCI core for hotplug resource management This patch converts the standard hotplug controller driver to use the PCI core for resource management. This eliminates a whole lot of duplicated code, and integrates shpchp in the system's normal PCI handling code. Signed-off-by: Rajesh Shah <rajesh.shah@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-10-14 03:05:36 +08:00
extern int shpchp_configure_device(struct slot *p_slot);
[PATCH] shpchp: remove redundant data structures State information is currently stored in per-slot as well as per-pci-function data structures in shpchp. There's a lot of overlap in the information kept, and some of it is never used. This patch consolidates the state information to per-slot and eliminates unused data structures. The biggest change is to eliminate the pci_func structure and the code around managing its lists. Signed-off-by: Rajesh Shah <rajesh.shah@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-10-14 03:05:41 +08:00
extern int shpchp_unconfigure_device(struct slot *p_slot);
[PATCH] shpchp: reduce dependence on ACPI Reduce the SHPC hotplug driver's dependence on ACPI. We don't walk the acpi namespace anymore to build a list of bridges and devices. The remaining interaction with ACPI is to run the _OSHP method to transition control of hotplug hardware from system BIOS to the shpc hotplug driver, and to run the _HPP method to get hotplug device parameters like cache line size, latency timer and SERR/PERR enable from BIOS. Note that one of the side effects of this patch is that shpchp does not enable the hot-added device or its DMA bus mastering automatically now. It expects the device driver to do that. This may break some drivers and we will have to fix them as they are reported. Signed-off-by: Rajesh Shah <rajesh.shah@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-10-14 03:05:38 +08:00
extern void get_hp_hw_control_from_firmware(struct pci_dev *dev);
extern void get_hp_params_from_firmware(struct pci_dev *dev,
struct hotplug_params *hpp);
extern int shpchprm_get_physical_slot_number(struct controller *ctrl,
u32 *sun, u8 busnum, u8 devnum);
[PATCH] shpchp: fix oops at driver unload At unload time, the shpchp driver does not remove sysfs files it had created in the driver's probe entry point. This patch fixes this problem. Signed-off-by: Rajesh Shah <rajesh.shah@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-10-14 03:05:44 +08:00
extern void shpchp_remove_ctrl_files(struct controller *ctrl);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
/* Global variables */
[PATCH] shpchp - cleanup controller list This patch changes SHPCHP driver to use list_head structure for managing controller list. Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-01-26 08:58:30 +08:00
extern struct list_head shpchp_ctrl_list;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
struct ctrl_reg {
volatile u32 base_offset;
volatile u32 slot_avail1;
volatile u32 slot_avail2;
volatile u32 slot_config;
volatile u16 sec_bus_config;
volatile u8 msi_ctrl;
volatile u8 prog_interface;
volatile u16 cmd;
volatile u16 cmd_status;
volatile u32 intr_loc;
volatile u32 serr_loc;
volatile u32 serr_intr_enable;
volatile u32 slot1;
volatile u32 slot2;
volatile u32 slot3;
volatile u32 slot4;
volatile u32 slot5;
volatile u32 slot6;
volatile u32 slot7;
volatile u32 slot8;
volatile u32 slot9;
volatile u32 slot10;
volatile u32 slot11;
volatile u32 slot12;
} __attribute__ ((packed));
/* offsets to the controller registers based on the above structure layout */
enum ctrl_offsets {
BASE_OFFSET = offsetof(struct ctrl_reg, base_offset),
SLOT_AVAIL1 = offsetof(struct ctrl_reg, slot_avail1),
SLOT_AVAIL2 = offsetof(struct ctrl_reg, slot_avail2),
SLOT_CONFIG = offsetof(struct ctrl_reg, slot_config),
SEC_BUS_CONFIG = offsetof(struct ctrl_reg, sec_bus_config),
MSI_CTRL = offsetof(struct ctrl_reg, msi_ctrl),
PROG_INTERFACE = offsetof(struct ctrl_reg, prog_interface),
CMD = offsetof(struct ctrl_reg, cmd),
CMD_STATUS = offsetof(struct ctrl_reg, cmd_status),
INTR_LOC = offsetof(struct ctrl_reg, intr_loc),
SERR_LOC = offsetof(struct ctrl_reg, serr_loc),
SERR_INTR_ENABLE = offsetof(struct ctrl_reg, serr_intr_enable),
SLOT1 = offsetof(struct ctrl_reg, slot1),
SLOT2 = offsetof(struct ctrl_reg, slot2),
SLOT3 = offsetof(struct ctrl_reg, slot3),
SLOT4 = offsetof(struct ctrl_reg, slot4),
SLOT5 = offsetof(struct ctrl_reg, slot5),
SLOT6 = offsetof(struct ctrl_reg, slot6),
SLOT7 = offsetof(struct ctrl_reg, slot7),
SLOT8 = offsetof(struct ctrl_reg, slot8),
SLOT9 = offsetof(struct ctrl_reg, slot9),
SLOT10 = offsetof(struct ctrl_reg, slot10),
SLOT11 = offsetof(struct ctrl_reg, slot11),
SLOT12 = offsetof(struct ctrl_reg, slot12),
};
[PATCH] shpchp: miscellaneous cleanups Remove un-necessary header includes, remove dead code, remove some type casts, receive function return in the correct data type... Signed-off-by: Rajesh Shah <rajesh.shah@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-10-14 03:05:42 +08:00
typedef u8(*php_intr_callback_t) (u8 hp_slot, void *instance_id);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
struct php_ctlr_state_s {
struct php_ctlr_state_s *pnext;
struct pci_dev *pci_dev;
unsigned int irq;
unsigned long flags; /* spinlock's */
u32 slot_device_offset;
u32 num_slots;
struct timer_list int_poll_timer; /* Added for poll event */
php_intr_callback_t attention_button_callback;
php_intr_callback_t switch_change_callback;
php_intr_callback_t presence_change_callback;
php_intr_callback_t power_fault_callback;
void *callback_instance_id;
void __iomem *creg; /* Ptr to controller register space */
};
/* Inline functions */
/* Inline functions to check the sanity of a pointer that is passed to us */
static inline int slot_paranoia_check (struct slot *slot, const char *function)
{
if (!slot) {
dbg("%s - slot == NULL", function);
return -1;
}
if (!slot->hotplug_slot) {
dbg("%s - slot->hotplug_slot == NULL!", function);
return -1;
}
return 0;
}
static inline struct slot *get_slot (struct hotplug_slot *hotplug_slot, const char *function)
{
struct slot *slot;
if (!hotplug_slot) {
dbg("%s - hotplug_slot == NULL\n", function);
return NULL;
}
slot = (struct slot *)hotplug_slot->private;
if (slot_paranoia_check (slot, function))
return NULL;
return slot;
}
static inline struct slot *shpchp_find_slot (struct controller *ctrl, u8 device)
{
[PATCH] shpchp - cleanup slot list This patch changes SHPCHP driver to use list_head structure for managing slot list. Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-01-26 08:57:40 +08:00
struct slot *slot;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
if (!ctrl)
return NULL;
[PATCH] shpchp - cleanup slot list This patch changes SHPCHP driver to use list_head structure for managing slot list. Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-01-26 08:57:40 +08:00
list_for_each_entry(slot, &ctrl->slot_list, slot_list) {
if (slot->device == device)
return slot;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
}
[PATCH] shpchp - cleanup slot list This patch changes SHPCHP driver to use list_head structure for managing slot list. Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-01-26 08:57:40 +08:00
err("%s: slot (device=0x%x) not found\n", __FUNCTION__, device);
return NULL;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
}
static inline int wait_for_ctrl_irq (struct controller *ctrl)
{
DECLARE_WAITQUEUE(wait, current);
int retval = 0;
add_wait_queue(&ctrl->queue, &wait);
if (!shpchp_poll_mode) {
/* Sleep for up to 1 second */
msleep_interruptible(1000);
} else {
/* Sleep for up to 2 seconds */
msleep_interruptible(2000);
}
remove_wait_queue(&ctrl->queue, &wait);
if (signal_pending(current))
retval = -EINTR;
return retval;
}
[PATCH] PCI Hotplug: shpchp: AMD POGO errata fix This patch fixes the AMD POGO errata on the hotplug controller where the platform will lock up or reboot if PERR/SERR generation is enabled and a slot is sent an enable command. This fix disables PERR/SERR generation before a slot is sent the enable command by first saving related registers, turning off SERR/PERR generation, enabling the slot, then restoring the registers. Signed-off-by: David Keck <david.keck@amd.com> Cc: Kristen Accardi <kristen.c.accardi@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-01-17 05:22:36 +08:00
static inline void amd_pogo_errata_save_misc_reg(struct slot *p_slot)
{
u32 pcix_misc2_temp;
/* save MiscII register */
pci_read_config_dword(p_slot->ctrl->pci_dev, PCIX_MISCII_OFFSET, &pcix_misc2_temp);
p_slot->ctrl->pcix_misc2_reg = pcix_misc2_temp;
/* clear SERR/PERR enable bits */
pcix_misc2_temp &= ~SERRFATALENABLE_MASK;
pcix_misc2_temp &= ~SERRNONFATALENABLE_MASK;
pcix_misc2_temp &= ~PERRFLOODENABLE_MASK;
pcix_misc2_temp &= ~PERRFATALENABLE_MASK;
pcix_misc2_temp &= ~PERRNONFATALENABLE_MASK;
pci_write_config_dword(p_slot->ctrl->pci_dev, PCIX_MISCII_OFFSET, pcix_misc2_temp);
}
static inline void amd_pogo_errata_restore_misc_reg(struct slot *p_slot)
{
u32 pcix_misc2_temp;
u32 pcix_bridge_errors_reg;
u32 pcix_mem_base_reg;
u8 perr_set;
u8 rse_set;
/* write-one-to-clear Bridge_Errors[ PERR_OBSERVED ] */
pci_read_config_dword(p_slot->ctrl->pci_dev, PCIX_MISC_BRIDGE_ERRORS_OFFSET, &pcix_bridge_errors_reg);
perr_set = pcix_bridge_errors_reg & PERR_OBSERVED_MASK;
if (perr_set) {
dbg ("%s W1C: Bridge_Errors[ PERR_OBSERVED = %08X]\n",__FUNCTION__ , perr_set);
pci_write_config_dword(p_slot->ctrl->pci_dev, PCIX_MISC_BRIDGE_ERRORS_OFFSET, perr_set);
}
/* write-one-to-clear Memory_Base_Limit[ RSE ] */
pci_read_config_dword(p_slot->ctrl->pci_dev, PCIX_MEM_BASE_LIMIT_OFFSET, &pcix_mem_base_reg);
rse_set = pcix_mem_base_reg & RSE_MASK;
if (rse_set) {
dbg ("%s W1C: Memory_Base_Limit[ RSE ]\n",__FUNCTION__ );
pci_write_config_dword(p_slot->ctrl->pci_dev, PCIX_MEM_BASE_LIMIT_OFFSET, rse_set);
}
/* restore MiscII register */
pci_read_config_dword( p_slot->ctrl->pci_dev, PCIX_MISCII_OFFSET, &pcix_misc2_temp );
if (p_slot->ctrl->pcix_misc2_reg & SERRFATALENABLE_MASK)
pcix_misc2_temp |= SERRFATALENABLE_MASK;
else
pcix_misc2_temp &= ~SERRFATALENABLE_MASK;
if (p_slot->ctrl->pcix_misc2_reg & SERRNONFATALENABLE_MASK)
pcix_misc2_temp |= SERRNONFATALENABLE_MASK;
else
pcix_misc2_temp &= ~SERRNONFATALENABLE_MASK;
if (p_slot->ctrl->pcix_misc2_reg & PERRFLOODENABLE_MASK)
pcix_misc2_temp |= PERRFLOODENABLE_MASK;
else
pcix_misc2_temp &= ~PERRFLOODENABLE_MASK;
if (p_slot->ctrl->pcix_misc2_reg & PERRFATALENABLE_MASK)
pcix_misc2_temp |= PERRFATALENABLE_MASK;
else
pcix_misc2_temp &= ~PERRFATALENABLE_MASK;
if (p_slot->ctrl->pcix_misc2_reg & PERRNONFATALENABLE_MASK)
pcix_misc2_temp |= PERRNONFATALENABLE_MASK;
else
pcix_misc2_temp &= ~PERRNONFATALENABLE_MASK;
pci_write_config_dword(p_slot->ctrl->pci_dev, PCIX_MISCII_OFFSET, pcix_misc2_temp);
}
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
enum php_ctlr_type {
PCI,
ISA,
ACPI
};
[PATCH] shpchp: miscellaneous cleanups Remove un-necessary header includes, remove dead code, remove some type casts, receive function return in the correct data type... Signed-off-by: Rajesh Shah <rajesh.shah@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-10-14 03:05:42 +08:00
int shpc_init( struct controller *ctrl, struct pci_dev *pdev);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
int shpc_get_ctlr_slot_config( struct controller *ctrl,
int *num_ctlr_slots,
int *first_device_num,
int *physical_slot_num,
int *updown,
int *flags);
struct hpc_ops {
int (*power_on_slot ) (struct slot *slot);
int (*slot_enable ) (struct slot *slot);
int (*slot_disable ) (struct slot *slot);
int (*set_bus_speed_mode) (struct slot *slot, enum pci_bus_speed speed);
int (*get_power_status) (struct slot *slot, u8 *status);
int (*get_attention_status) (struct slot *slot, u8 *status);
int (*set_attention_status) (struct slot *slot, u8 status);
int (*get_latch_status) (struct slot *slot, u8 *status);
int (*get_adapter_status) (struct slot *slot, u8 *status);
int (*get_max_bus_speed) (struct slot *slot, enum pci_bus_speed *speed);
int (*get_cur_bus_speed) (struct slot *slot, enum pci_bus_speed *speed);
int (*get_adapter_speed) (struct slot *slot, enum pci_bus_speed *speed);
int (*get_mode1_ECC_cap) (struct slot *slot, u8 *mode);
int (*get_prog_int) (struct slot *slot, u8 *prog_int);
int (*query_power_fault) (struct slot *slot);
void (*green_led_on) (struct slot *slot);
void (*green_led_off) (struct slot *slot);
void (*green_led_blink) (struct slot *slot);
void (*release_ctlr) (struct controller *ctrl);
int (*check_cmd_status) (struct controller *ctrl);
};
#endif /* _SHPCHP_H */