OpenSDV
/
linux-stable-rt
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
linux-stable-rt/arch/ppc64/Makefile

139 lines
4.5 KiB
Makefile
Raw Normal View History

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
# This file is included by the global makefile so that you can add your own
# architecture-specific flags and dependencies. Remember to do have actions
# for "archclean" and "archdep" for cleaning up and making dependencies for
# this architecture
#
# This file is subject to the terms and conditions of the GNU General Public
# License. See the file "COPYING" in the main directory of this archive
# for more details.
#
# Copyright (C) 1994 by Linus Torvalds
# Changes for PPC by Gary Thomas
# Rewritten by Cort Dougan and Paul Mackerras
# Adjusted for PPC64 by Tom Gall
#
KERNELLOAD := 0xc000000000000000
# Set default 32 bits cross compilers for vdso and boot wrapper
CROSS32_COMPILE ?=
CROSS32CC := $(CROSS32_COMPILE)gcc
CROSS32AS := $(CROSS32_COMPILE)as
CROSS32LD := $(CROSS32_COMPILE)ld
CROSS32OBJCOPY := $(CROSS32_COMPILE)objcopy
# If we have a biarch compiler, use it for 32 bits cross compile if
# CROSS32_COMPILE wasn't explicitely defined, and add proper explicit
# target type to target compilers
HAS_BIARCH := $(call cc-option-yn, -m64)
ifeq ($(HAS_BIARCH),y)
ifeq ($(CROSS32_COMPILE),)
CROSS32CC := $(CC) -m32
CROSS32AS := $(AS) -a32
CROSS32LD := $(LD) -m elf32ppc
CROSS32OBJCOPY := $(OBJCOPY)
endif
[PATCH] ppc64: override command line AS/LD/CC variables when adding -m64 and co for biarch compilers The following kind of calls currently fails : make ARCH=ppc64 CC="gcc-3.4" Since the code for detecting a biarch compiler and adding the needed 64bit magic argument fails if the AS/LD/CC commands are overriden in the command line. The attached patch fixes this by using the make override and += directive, but i am not 100% sure this will work without gmake, as i am no Makefile expert. Cc: Paul Mackerras <paulus@samba.org> Cc: Anton Blanchard <anton@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-22 08:15:32 +08:00
override AS += -a64
override LD += -m elf64ppc
override CC += -m64
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
endif
export CROSS32CC CROSS32AS CROSS32LD CROSS32OBJCOPY
new_nm := $(shell if $(NM) --help 2>&1 | grep -- '--synthetic' > /dev/null; then echo y; else echo n; fi)
ifeq ($(new_nm),y)
NM := $(NM) --synthetic
endif
[PATCH] CHECKFLAGS on ppc64 got broken Now that asm-powerpc/* is using ifdefs on __powerpc64__ we need to add it to CHECKFLAGS on ppc64. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-08 06:28:32 +08:00
CHECKFLAGS += -m64 -D__powerpc__ -D__powerpc64__
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
LDFLAGS := -m elf64ppc
LDFLAGS_vmlinux := -Bstatic -e $(KERNELLOAD) -Ttext $(KERNELLOAD)
CFLAGS += -msoft-float -pipe -mminimal-toc -mtraceback=none \
-mcall-aixdesc
[PATCH] Create include/asm-powerpc The ppc and ppc64 trees are hopefully going to merge over time, so this patch begins the process by creating a place for the merging of the header files. Create include/asm-powerpc (and move linkage.h into it from asm-{ppc,ppc64} since we don't like empty directories). Modify the ppc and ppc64 Makefiles to cope. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-08-29 11:15:50 +08:00
# Temporary hack until we have migrated to asm-powerpc
[PATCH] powerpc: Move include3 to arch/$(ARCH)/include This is less troublesome and makes more sense. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-10 22:00:14 +08:00
CPPFLAGS += -Iarch/$(ARCH)/include
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
[PATCH] ppc64: fix gcc 4.0 vs CONFIG_ALTIVEC gcc-4.0 generates altivec code implicitly when -mcpu indicates an altivec capable CPU which is not suitable for the kernel. However, we used to set -mcpu=970 when CONFIG_ALTIVEC was set because a gcc-3.x bug prevented from using -maltivec along with -mcpu=power4, thus prevented building the RAID6 altivec code. This patch fixes all of this by testing for the gcc version. If 4.0 or later, just normally use -mcpu=power4 and let the RAID6 code add -maltivec to the few files it needs to be compiled with altivec support. For 3.x, we still use -mcpu=970 to work around the above problem, which is fine as 3.x will never implicitly generate altivec code. The Makefile hackery may not be the most lovely, I welcome anybody more skilled than me to improve it. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-05-03 13:34:58 +08:00
GCC_VERSION := $(call cc-version)
GCC_BROKEN_VEC := $(shell if [ $(GCC_VERSION) -lt 0400 ] ; then echo "y"; fi ;)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
ifeq ($(CONFIG_POWER4_ONLY),y)
ifeq ($(CONFIG_ALTIVEC),y)
[PATCH] ppc64: fix gcc 4.0 vs CONFIG_ALTIVEC gcc-4.0 generates altivec code implicitly when -mcpu indicates an altivec capable CPU which is not suitable for the kernel. However, we used to set -mcpu=970 when CONFIG_ALTIVEC was set because a gcc-3.x bug prevented from using -maltivec along with -mcpu=power4, thus prevented building the RAID6 altivec code. This patch fixes all of this by testing for the gcc version. If 4.0 or later, just normally use -mcpu=power4 and let the RAID6 code add -maltivec to the few files it needs to be compiled with altivec support. For 3.x, we still use -mcpu=970 to work around the above problem, which is fine as 3.x will never implicitly generate altivec code. The Makefile hackery may not be the most lovely, I welcome anybody more skilled than me to improve it. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-05-03 13:34:58 +08:00
ifeq ($(GCC_BROKEN_VEC),y)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
CFLAGS += $(call cc-option,-mcpu=970)
else
CFLAGS += $(call cc-option,-mcpu=power4)
endif
[PATCH] ppc64: fix gcc 4.0 vs CONFIG_ALTIVEC gcc-4.0 generates altivec code implicitly when -mcpu indicates an altivec capable CPU which is not suitable for the kernel. However, we used to set -mcpu=970 when CONFIG_ALTIVEC was set because a gcc-3.x bug prevented from using -maltivec along with -mcpu=power4, thus prevented building the RAID6 altivec code. This patch fixes all of this by testing for the gcc version. If 4.0 or later, just normally use -mcpu=power4 and let the RAID6 code add -maltivec to the few files it needs to be compiled with altivec support. For 3.x, we still use -mcpu=970 to work around the above problem, which is fine as 3.x will never implicitly generate altivec code. The Makefile hackery may not be the most lovely, I welcome anybody more skilled than me to improve it. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-05-03 13:34:58 +08:00
else
CFLAGS += $(call cc-option,-mcpu=power4)
endif
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
else
CFLAGS += $(call cc-option,-mtune=power4)
endif
# Enable unit-at-a-time mode when possible. It shrinks the
# kernel considerably.
CFLAGS += $(call cc-option,-funit-at-a-time)
head-y := arch/ppc64/kernel/head.o
[PATCH] powerpc: Fix handling of fpscr on 64-bit The recent merge of fpu.S broken the handling of fpscr for ARCH=powerpc and CONFIG_PPC64=y. FP registers could be corrupted, leading to strange random application crashes. The confusion arises, because the thread_struct has (and requires) a 64-bit area to save the fpscr, because we use load/store double instructions to get it in to/out of the FPU. However, only the low 32-bits are actually used, so we want to treat it as a 32-bit quantity when manipulating its bits to avoid extra load/stores on 32-bit. This patch replaces the current definition with a structure of two 32-bit quantities (pad and val), to clarify things as much as is possible. The 'val' field is used when manipulating bits, the structure itself is used when obtaining the address for loading/unloading the value from the FPU. While we're at it, consolidate the 4 (!) almost identical versions of cvt_fd() and cvt_df() (arch/ppc/kernel/misc.S, arch/ppc64/kernel/misc.S, arch/powerpc/kernel/misc_32.S, arch/powerpc/kernel/misc_64.S) into a single version in fpu.S. The new version takes a pointer to thread_struct and applies the correct offset itself, rather than a pointer to the fpscr field itself, again to avoid confusion as to which is the correct field to use. Finally, this patch makes ARCH=ppc64 also use the consolidated fpu.S code, which it previously did not. Built for G5 (ARCH=ppc64 and ARCH=powerpc), 32-bit powermac (ARCH=ppc and ARCH=powerpc) and Walnut (ARCH=ppc, CONFIG_MATH_EMULATION=y). Booted on G5 (ARCH=powerpc) and things which previously fell over no longer do. Signed-off-by: David Gibson <dwg@au1.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-27 14:27:25 +08:00
head-y += arch/powerpc/kernel/fpu.o
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
libs-y += arch/ppc64/lib/
ppc64: simplify the build a little Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
2005-09-30 11:51:25 +08:00
core-y += arch/ppc64/kernel/ arch/powerpc/kernel/
powerpc: Merge arch/ppc64/mm to arch/powerpc/mm This moves the remaining files in arch/ppc64/mm to arch/powerpc/mm, and arranges that we use them when compiling with ARCH=ppc64. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-10 19:58:35 +08:00
core-y += arch/powerpc/mm/
ppc64: Use the merged mpic.c This means we now compile in arch/powerpc/sysdev for ARCH=ppc64. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-20 19:06:44 +08:00
core-y += arch/powerpc/sysdev/
powerpc: Create arch/powerpc/platforms/iseries I also move arch/ppc64/kernel/HvCall.c to arch/powerpc/platforms/iseries/hvcall.c. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
2005-09-23 11:15:51 +08:00
core-y += arch/powerpc/platforms/
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
core-$(CONFIG_XMON) += arch/ppc64/xmon/
[PATCH] powerpc: merge the rest of arch/ppc*/oprofile - merge common.c - move model specific files - remove stub Makefiles - clean up arch/ppc*/Makefile Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-19 21:24:08 +08:00
drivers-$(CONFIG_OPROFILE) += arch/powerpc/oprofile/
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
boot := arch/ppc64/boot
[PATCH] ppc64: zimage build fix Signed-off-by: Geoff Levand <geoffrey.levand@am.sony.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-08-16 04:59:13 +08:00
boottargets-$(CONFIG_PPC_PSERIES) += zImage zImage.initrd
boottargets-$(CONFIG_PPC_PMAC) += zImage.vmode zImage.initrd.vmode
boottargets-$(CONFIG_PPC_MAPLE) += zImage zImage.initrd
boottargets-$(CONFIG_PPC_ISERIES) += vmlinux.sminitrd vmlinux.initrd vmlinux.sm
boottargets-$(CONFIG_PPC_BPA) += zImage zImage.initrd
$(boottargets-y): vmlinux
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
$(Q)$(MAKE) $(build)=$(boot) $(boot)/$@
bootimage-$(CONFIG_PPC_PSERIES) := $(boot)/zImage
bootimage-$(CONFIG_PPC_PMAC) := vmlinux
bootimage-$(CONFIG_PPC_MAPLE) := $(boot)/zImage
[PATCH] ppc64: add BPA platform type This adds the basic support for running on BPA machines. So far, this is only the IBM workstation, and it will not run on others without a little more generalization. It should be possible to configure a kernel for any combination of CONFIG_PPC_BPA with any of the other multiplatform targets. Signed-off-by: Arnd Bergmann <arndb@de.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-06-23 07:43:37 +08:00
bootimage-$(CONFIG_PPC_BPA) := zImage
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
bootimage-$(CONFIG_PPC_ISERIES) := vmlinux
BOOTIMAGE := $(bootimage-y)
install: vmlinux
$(Q)$(MAKE) $(build)=$(boot) BOOTIMAGE=$(BOOTIMAGE) $@
defaultimage-$(CONFIG_PPC_PSERIES) := zImage
[PATCH] ppc64: Build zImage.vmode for G5 zImage.vmode was recently added. It's a version of zImage in which the ELF note section used by open firmware indicates that it requires a virtual mode instance of OF instead of real mode. This allows it to work with Apple OF, and thus is directly bootable (or netbootable) from OF command line. (Unfortunately, pSeries OF sort-of requires real mode and Apple OF sort-of requires virtual mode, and both tend to be unhappy if no notes section specifies the mode at all). However, we forgot to add zImage.vmode to the default G5 build. This fixes it. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-22 00:55:34 +08:00
defaultimage-$(CONFIG_PPC_PMAC) := zImage.vmode
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
defaultimage-$(CONFIG_PPC_MAPLE) := zImage
defaultimage-$(CONFIG_PPC_ISERIES) := vmlinux
KBUILD_IMAGE := $(defaultimage-y)
all: $(KBUILD_IMAGE)
archclean:
$(Q)$(MAKE) $(clean)=$(boot)
[PATCH] powerpc: Move include3 to arch/$(ARCH)/include This is less troublesome and makes more sense. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-10 22:00:14 +08:00
# Temporary hack until we have migrated to asm-powerpc
$(Q)rm -rf arch/$(ARCH)/include
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
[PATCH] Create include/asm-powerpc The ppc and ppc64 trees are hopefully going to merge over time, so this patch begins the process by creating a place for the merging of the header files. Create include/asm-powerpc (and move linkage.h into it from asm-{ppc,ppc64} since we don't like empty directories). Modify the ppc and ppc64 Makefiles to cope. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-08-29 11:15:50 +08:00
# Temporary hack until we have migrated to asm-powerpc
[PATCH] powerpc: Move include3 to arch/$(ARCH)/include This is less troublesome and makes more sense. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-10 22:00:14 +08:00
include/asm: arch/$(ARCH)/include/asm
arch/$(ARCH)/include/asm:
$(Q)if [ ! -d arch/$(ARCH)/include ]; then mkdir -p arch/$(ARCH)/include; fi
$(Q)ln -fsn $(srctree)/include/asm-powerpc arch/$(ARCH)/include/asm
[PATCH] Create include/asm-powerpc The ppc and ppc64 trees are hopefully going to merge over time, so this patch begins the process by creating a place for the merging of the header files. Create include/asm-powerpc (and move linkage.h into it from asm-{ppc,ppc64} since we don't like empty directories). Modify the ppc and ppc64 Makefiles to cope. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-08-29 11:15:50 +08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
define archhelp
[PATCH] ppc64: zimage build fix Signed-off-by: Geoff Levand <geoffrey.levand@am.sony.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-08-16 04:59:13 +08:00
echo ' zImage.vmode - Compressed kernel image (arch/$(ARCH)/boot/zImage.vmode)'
echo ' zImage.initrd.vmode - Compressed kernel image with initrd attached,'
echo ' sourced from arch/$(ARCH)/boot/ramdisk.image.gz'
echo ' (arch/$(ARCH)/boot/zImage.initrd.vmode)'
echo ' zImage - zImage for pSeries machines'
echo ' zImage.initrd - zImage with initrd for pSeries machines'
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
endef