linux-stable-rt/drivers/acpi/resources/rscreate.c

/*******************************************************************************
 *
 * Module Name: rscreate - Create resource lists/tables
 *
 ******************************************************************************/

/*
 * Copyright (C) 2000 - 2005, R. Byron Moore
 * All rights reserved.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
 * are met:
 * 1. Redistributions of source code must retain the above copyright
 *    notice, this list of conditions, and the following disclaimer,
 *    without modification.
 * 2. Redistributions in binary form must reproduce at minimum a disclaimer
 *    substantially similar to the "NO WARRANTY" disclaimer below
 *    ("Disclaimer") and any redistribution must be conditioned upon
 *    including a substantially similar Disclaimer requirement for further
 *    binary redistribution.
 * 3. Neither the names of the above-listed copyright holders nor the names
 *    of any contributors may be used to endorse or promote products derived
 *    from this software without specific prior written permission.
 *
 * Alternatively, this software may be distributed under the terms of the
 * GNU General Public License ("GPL") version 2 as published by the Free
 * Software Foundation.
 *
 * NO WARRANTY
 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
 * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
 * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
 * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
 * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
 * POSSIBILITY OF SUCH DAMAGES.
 */


#include <acpi/acpi.h>
#include <acpi/acresrc.h>
#include <acpi/amlcode.h>
#include <acpi/acnamesp.h>

#define _COMPONENT          ACPI_RESOURCES
	 ACPI_MODULE_NAME    ("rscreate")


/*******************************************************************************
 *
 * FUNCTION:    acpi_rs_create_resource_list
 *
 * PARAMETERS:  byte_stream_buffer      - Pointer to the resource byte stream
 *              output_buffer           - Pointer to the user's buffer
 *
 * RETURN:      Status  - AE_OK if okay, else a valid acpi_status code
 *              If output_buffer is not large enough, output_buffer_length
 *              indicates how large output_buffer should be, else it
 *              indicates how may u8 elements of output_buffer are valid.
 *
 * DESCRIPTION: Takes the byte stream returned from a _CRS, _PRS control method
 *              execution and parses the stream to create a linked list
 *              of device resources.
 *
 ******************************************************************************/

acpi_status
acpi_rs_create_resource_list (
	union acpi_operand_object       *byte_stream_buffer,
	struct acpi_buffer              *output_buffer)
{

	acpi_status                     status;
	u8                              *byte_stream_start;
	acpi_size                       list_size_needed = 0;
	u32                             byte_stream_buffer_length;


	ACPI_FUNCTION_TRACE ("rs_create_resource_list");


	ACPI_DEBUG_PRINT ((ACPI_DB_INFO, "byte_stream_buffer = %p\n",
		byte_stream_buffer));

	/* Params already validated, so we don't re-validate here */

	byte_stream_buffer_length = byte_stream_buffer->buffer.length;
	byte_stream_start = byte_stream_buffer->buffer.pointer;

	/*
	 * Pass the byte_stream_buffer into a module that can calculate
	 * the buffer size needed for the linked list
	 */
	status = acpi_rs_get_list_length (byte_stream_start, byte_stream_buffer_length,
			 &list_size_needed);

	ACPI_DEBUG_PRINT ((ACPI_DB_INFO, "Status=%X list_size_needed=%X\n",
		status, (u32) list_size_needed));
	if (ACPI_FAILURE (status)) {
		return_ACPI_STATUS (status);
	}

	/* Validate/Allocate/Clear caller buffer */

	status = acpi_ut_initialize_buffer (output_buffer, list_size_needed);
	if (ACPI_FAILURE (status)) {
		return_ACPI_STATUS (status);
	}

	/* Do the conversion */

	status = acpi_rs_byte_stream_to_list (byte_stream_start, byte_stream_buffer_length,
			  output_buffer->pointer);
	if (ACPI_FAILURE (status)) {
		return_ACPI_STATUS (status);
	}

	ACPI_DEBUG_PRINT ((ACPI_DB_INFO, "output_buffer %p Length %X\n",
			output_buffer->pointer, (u32) output_buffer->length));
	return_ACPI_STATUS (AE_OK);
}


/*******************************************************************************
 *
 * FUNCTION:    acpi_rs_create_pci_routing_table
 *
 * PARAMETERS:  package_object          - Pointer to an union acpi_operand_object
 *                                        package
 *              output_buffer           - Pointer to the user's buffer
 *
 * RETURN:      Status  AE_OK if okay, else a valid acpi_status code.
 *              If the output_buffer is too small, the error will be
 *              AE_BUFFER_OVERFLOW and output_buffer->Length will point
 *              to the size buffer needed.
 *
 * DESCRIPTION: Takes the union acpi_operand_object    package and creates a
 *              linked list of PCI interrupt descriptions
 *
 * NOTE: It is the caller's responsibility to ensure that the start of the
 * output buffer is aligned properly (if necessary).
 *
 ******************************************************************************/

acpi_status
acpi_rs_create_pci_routing_table (
	union acpi_operand_object       *package_object,
	struct acpi_buffer              *output_buffer)
{
	u8                              *buffer;
	union acpi_operand_object       **top_object_list;
	union acpi_operand_object       **sub_object_list;
	union acpi_operand_object       *obj_desc;
	acpi_size                       buffer_size_needed = 0;
	u32                             number_of_elements;
	u32                             index;
	struct acpi_pci_routing_table   *user_prt;
	struct acpi_namespace_node      *node;
	acpi_status                     status;
	struct acpi_buffer              path_buffer;


	ACPI_FUNCTION_TRACE ("rs_create_pci_routing_table");


	/* Params already validated, so we don't re-validate here */

	/* Get the required buffer length */

	status = acpi_rs_get_pci_routing_table_length (package_object,
			 &buffer_size_needed);
	if (ACPI_FAILURE (status)) {
		return_ACPI_STATUS (status);
	}

	ACPI_DEBUG_PRINT ((ACPI_DB_INFO, "buffer_size_needed = %X\n",
		(u32) buffer_size_needed));

	/* Validate/Allocate/Clear caller buffer */

	status = acpi_ut_initialize_buffer (output_buffer, buffer_size_needed);
	if (ACPI_FAILURE (status)) {
		return_ACPI_STATUS (status);
	}

	/*
	 * Loop through the ACPI_INTERNAL_OBJECTS - Each object
	 * should be a package that in turn contains an
	 * acpi_integer Address, a u8 Pin, a Name and a u8 source_index.
	 */
	top_object_list  = package_object->package.elements;
	number_of_elements = package_object->package.count;
	buffer           = output_buffer->pointer;
	user_prt         = ACPI_CAST_PTR (struct acpi_pci_routing_table, buffer);

	for (index = 0; index < number_of_elements; index++) {
		/*
		 * Point user_prt past this current structure
		 *
		 * NOTE: On the first iteration, user_prt->Length will
		 * be zero because we cleared the return buffer earlier
		 */
		buffer += user_prt->length;
		user_prt = ACPI_CAST_PTR (struct acpi_pci_routing_table, buffer);

		/*
		 * Fill in the Length field with the information we have at this point.
		 * The minus four is to subtract the size of the u8 Source[4] member
		 * because it is added below.
		 */
		user_prt->length = (sizeof (struct acpi_pci_routing_table) - 4);

		/* Each element of the top-level package must also be a package */

		if (ACPI_GET_OBJECT_TYPE (*top_object_list) != ACPI_TYPE_PACKAGE) {
			ACPI_DEBUG_PRINT ((ACPI_DB_ERROR,
				"(PRT[%X]) Need sub-package, found %s\n",
				index, acpi_ut_get_object_type_name (*top_object_list)));
			return_ACPI_STATUS (AE_AML_OPERAND_TYPE);
		}

		/* Each sub-package must be of length 4 */

		if ((*top_object_list)->package.count != 4) {
			ACPI_DEBUG_PRINT ((ACPI_DB_ERROR,
				"(PRT[%X]) Need package of length 4, found length %d\n",
				index, (*top_object_list)->package.count));
			return_ACPI_STATUS (AE_AML_PACKAGE_LIMIT);
		}

		/*
		 * Dereference the sub-package.
		 * The sub_object_list will now point to an array of the four IRQ
		 * elements: [Address, Pin, Source, source_index]
		 */
		sub_object_list = (*top_object_list)->package.elements;

		/* 1) First subobject: Dereference the PRT.Address */

		obj_desc = sub_object_list[0];
		if (ACPI_GET_OBJECT_TYPE (obj_desc) == ACPI_TYPE_INTEGER) {
			user_prt->address = obj_desc->integer.value;
		}
		else {
			ACPI_DEBUG_PRINT ((ACPI_DB_ERROR,
				"(PRT[%X].Address) Need Integer, found %s\n",
				index, acpi_ut_get_object_type_name (obj_desc)));
			return_ACPI_STATUS (AE_BAD_DATA);
		}

		/* 2) Second subobject: Dereference the PRT.Pin */

		obj_desc = sub_object_list[1];
		if (ACPI_GET_OBJECT_TYPE (obj_desc) == ACPI_TYPE_INTEGER) {
			user_prt->pin = (u32) obj_desc->integer.value;
		}
		else {
			ACPI_DEBUG_PRINT ((ACPI_DB_ERROR,
				"(PRT[%X].Pin) Need Integer, found %s\n",
				index, acpi_ut_get_object_type_name (obj_desc)));
			return_ACPI_STATUS (AE_BAD_DATA);
		}

		/* 3) Third subobject: Dereference the PRT.source_name */

		obj_desc = sub_object_list[2];
		switch (ACPI_GET_OBJECT_TYPE (obj_desc)) {
		case ACPI_TYPE_LOCAL_REFERENCE:

			if (obj_desc->reference.opcode != AML_INT_NAMEPATH_OP) {
				ACPI_DEBUG_PRINT ((ACPI_DB_ERROR,
					"(PRT[%X].Source) Need name, found reference op %X\n",
					index, obj_desc->reference.opcode));
				return_ACPI_STATUS (AE_BAD_DATA);
			}

			node = obj_desc->reference.node;

			/* Use *remaining* length of the buffer as max for pathname */

			path_buffer.length = output_buffer->length -
					   (u32) ((u8 *) user_prt->source -
					   (u8 *) output_buffer->pointer);
			path_buffer.pointer = user_prt->source;

			status = acpi_ns_handle_to_pathname ((acpi_handle) node, &path_buffer);

			/* +1 to include null terminator */

			user_prt->length += (u32) ACPI_STRLEN (user_prt->source) + 1;
			break;


		case ACPI_TYPE_STRING:

			ACPI_STRCPY (user_prt->source, obj_desc->string.pointer);

			/*
			 * Add to the Length field the length of the string
			 * (add 1 for terminator)
			 */
			user_prt->length += obj_desc->string.length + 1;
			break;


		case ACPI_TYPE_INTEGER:
			/*
			 * If this is a number, then the Source Name is NULL, since the
			 * entire buffer was zeroed out, we can leave this alone.
			 *
			 * Add to the Length field the length of the u32 NULL
			 */
			user_prt->length += sizeof (u32);
			break;


		default:

		   ACPI_DEBUG_PRINT ((ACPI_DB_ERROR,
			   "(PRT[%X].Source) Need Ref/String/Integer, found %s\n",
				index, acpi_ut_get_object_type_name (obj_desc)));
		   return_ACPI_STATUS (AE_BAD_DATA);
		}

		/* Now align the current length */

		user_prt->length = (u32) ACPI_ROUND_UP_to_64_bITS (user_prt->length);

		/* 4) Fourth subobject: Dereference the PRT.source_index */

		obj_desc = sub_object_list[3];
		if (ACPI_GET_OBJECT_TYPE (obj_desc) == ACPI_TYPE_INTEGER) {
			user_prt->source_index = (u32) obj_desc->integer.value;
		}
		else {
			ACPI_DEBUG_PRINT ((ACPI_DB_ERROR,
				"(PRT[%X].source_index) Need Integer, found %s\n",
				index, acpi_ut_get_object_type_name (obj_desc)));
			return_ACPI_STATUS (AE_BAD_DATA);
		}

		/* Point to the next union acpi_operand_object in the top level package */

		top_object_list++;
	}

	ACPI_DEBUG_PRINT ((ACPI_DB_INFO, "output_buffer %p Length %X\n",
			output_buffer->pointer, (u32) output_buffer->length));
	return_ACPI_STATUS (AE_OK);
}


/*******************************************************************************
 *
 * FUNCTION:    acpi_rs_create_byte_stream
 *
 * PARAMETERS:  linked_list_buffer      - Pointer to the resource linked list
 *              output_buffer           - Pointer to the user's buffer
 *
 * RETURN:      Status  AE_OK if okay, else a valid acpi_status code.
 *              If the output_buffer is too small, the error will be
 *              AE_BUFFER_OVERFLOW and output_buffer->Length will point
 *              to the size buffer needed.
 *
 * DESCRIPTION: Takes the linked list of device resources and
 *              creates a bytestream to be used as input for the
 *              _SRS control method.
 *
 ******************************************************************************/

acpi_status
acpi_rs_create_byte_stream (
	struct acpi_resource            *linked_list_buffer,
	struct acpi_buffer              *output_buffer)
{
	acpi_status                     status;
	acpi_size                       byte_stream_size_needed = 0;


	ACPI_FUNCTION_TRACE ("rs_create_byte_stream");


	ACPI_DEBUG_PRINT ((ACPI_DB_INFO, "linked_list_buffer = %p\n",
		linked_list_buffer));

	/*
	 * Params already validated, so we don't re-validate here
	 *
	 * Pass the linked_list_buffer into a module that calculates
	 * the buffer size needed for the byte stream.
	 */
	status = acpi_rs_get_byte_stream_length (linked_list_buffer,
			 &byte_stream_size_needed);

	ACPI_DEBUG_PRINT ((ACPI_DB_INFO, "byte_stream_size_needed=%X, %s\n",
		(u32) byte_stream_size_needed, acpi_format_exception (status)));
	if (ACPI_FAILURE (status)) {
		return_ACPI_STATUS (status);
	}

	/* Validate/Allocate/Clear caller buffer */

	status = acpi_ut_initialize_buffer (output_buffer, byte_stream_size_needed);
	if (ACPI_FAILURE (status)) {
		return_ACPI_STATUS (status);
	}

	/* Do the conversion */

	status = acpi_rs_list_to_byte_stream (linked_list_buffer, byte_stream_size_needed,
			  output_buffer->pointer);
	if (ACPI_FAILURE (status)) {
		return_ACPI_STATUS (status);
	}

	ACPI_DEBUG_PRINT ((ACPI_DB_INFO, "output_buffer %p Length %X\n",
			output_buffer->pointer, (u32) output_buffer->length));
	return_ACPI_STATUS (AE_OK);
}