OpenSDV
/
linux-stable-rt
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
linux-stable-rt/arch/avr32/boards/atngw100/Kconfig

59 lines
1.6 KiB
Plaintext
Raw Normal View History

avr32: Add support for EVKLCD10X addon boards This patch lets the user enable support for EVKLCD100 and EVKLCD101 (refered to by EVKLCD10X). By enabling EVKLCD10X support the LCD controller and AC97 controller platform devices are added. The user can also choose between the EVKLCD100 (QVGA display) and the EVKLCD101 (VGA display), this is added to automagically select the correct panel timing and resolution parameters. Enabling support for EVKLCD10X addon board will cripple the MCI platform device a bit since they share two GPIO lines (detect and write-protect). These two lines are disabled when EVKLCD10X is enabled. The default configurations are based upon ATNGW100, but with added AC97C and LCDC driver. Virtual terminal is also enabled by default for EVKLCD10X boards. Verified on hardware with a NGW100 + EVKLCD100/101. Signed-off-by: Hans-Christian Egtvedt <hans-christian.egtvedt@atmel.com> Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
2008-07-01 16:29:27 +08:00
# NGW100 customization
if BOARD_ATNGW100
avr32: Change Atmel ATNGW100 config to add choice of add-on board Signed-off-by: Peter Ma <pma@mediamatech.com> Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
2009-06-08 18:54:02 +08:00
choice
prompt "Select an NGW100 add-on board to support"
default BOARD_ATNGW100_ADDON_NONE
config BOARD_ATNGW100_ADDON_NONE
bool "None"
avr32: Add support for EVKLCD10X addon boards This patch lets the user enable support for EVKLCD100 and EVKLCD101 (refered to by EVKLCD10X). By enabling EVKLCD10X support the LCD controller and AC97 controller platform devices are added. The user can also choose between the EVKLCD100 (QVGA display) and the EVKLCD101 (VGA display), this is added to automagically select the correct panel timing and resolution parameters. Enabling support for EVKLCD10X addon board will cripple the MCI platform device a bit since they share two GPIO lines (detect and write-protect). These two lines are disabled when EVKLCD10X is enabled. The default configurations are based upon ATNGW100, but with added AC97C and LCDC driver. Virtual terminal is also enabled by default for EVKLCD10X boards. Verified on hardware with a NGW100 + EVKLCD100/101. Signed-off-by: Hans-Christian Egtvedt <hans-christian.egtvedt@atmel.com> Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
2008-07-01 16:29:27 +08:00
config BOARD_ATNGW100_EVKLCD10X
avr32: Change Atmel ATNGW100 config to add choice of add-on board Signed-off-by: Peter Ma <pma@mediamatech.com> Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
2009-06-08 18:54:02 +08:00
bool "EVKLCD10X addon board"
avr32: Add support for EVKLCD10X addon boards This patch lets the user enable support for EVKLCD100 and EVKLCD101 (refered to by EVKLCD10X). By enabling EVKLCD10X support the LCD controller and AC97 controller platform devices are added. The user can also choose between the EVKLCD100 (QVGA display) and the EVKLCD101 (VGA display), this is added to automagically select the correct panel timing and resolution parameters. Enabling support for EVKLCD10X addon board will cripple the MCI platform device a bit since they share two GPIO lines (detect and write-protect). These two lines are disabled when EVKLCD10X is enabled. The default configurations are based upon ATNGW100, but with added AC97C and LCDC driver. Virtual terminal is also enabled by default for EVKLCD10X boards. Verified on hardware with a NGW100 + EVKLCD100/101. Signed-off-by: Hans-Christian Egtvedt <hans-christian.egtvedt@atmel.com> Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
2008-07-01 16:29:27 +08:00
help
This enables support for the EVKLCD100 (QVGA) or EVKLCD101 (VGA)
addon board for the NGW100. By enabling this the LCD controller and
AC97 controller is added as platform devices.
This choice disables the detect pin and the write-protect pin for the
MCI platform device, since it conflicts with the LCD platform device.
The MCI pins can be reenabled by editing the "add device function" but
this may break the setup for other displays that use these pins.
avr32: Add support for Mediama RMTx add-on board for ATNGW100 Signed-off-by: Peter Ma <pma@mediamatech.com> Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
2009-06-08 18:55:35 +08:00
config BOARD_ATNGW100_MRMT
bool "Mediama RMT1/2 add-on board"
help
This enables support for the Mediama RMT1 or RMT2 board.
RMT provides LCD support, AC97 codec and other
optional peripherals to the Atmel NGW100.
This choice disables the detect pin and the write-protect pin for the
MCI platform device, since it conflicts with the LCD platform device.
The MCI pins can be reenabled by editing the "add device function" but
this may break the setup for other displays that use these pins.
avr32: Change Atmel ATNGW100 config to add choice of add-on board Signed-off-by: Peter Ma <pma@mediamatech.com> Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
2009-06-08 18:54:02 +08:00
endchoice
avr32: Add support for EVKLCD10X addon boards This patch lets the user enable support for EVKLCD100 and EVKLCD101 (refered to by EVKLCD10X). By enabling EVKLCD10X support the LCD controller and AC97 controller platform devices are added. The user can also choose between the EVKLCD100 (QVGA display) and the EVKLCD101 (VGA display), this is added to automagically select the correct panel timing and resolution parameters. Enabling support for EVKLCD10X addon board will cripple the MCI platform device a bit since they share two GPIO lines (detect and write-protect). These two lines are disabled when EVKLCD10X is enabled. The default configurations are based upon ATNGW100, but with added AC97C and LCDC driver. Virtual terminal is also enabled by default for EVKLCD10X boards. Verified on hardware with a NGW100 + EVKLCD100/101. Signed-off-by: Hans-Christian Egtvedt <hans-christian.egtvedt@atmel.com> Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
2008-07-01 16:29:27 +08:00
choice
prompt "LCD panel resolution on EVKLCD10X"
depends on BOARD_ATNGW100_EVKLCD10X
default BOARD_ATNGW100_EVKLCD10X_VGA
config BOARD_ATNGW100_EVKLCD10X_QVGA
bool "QVGA (320x240)"
config BOARD_ATNGW100_EVKLCD10X_VGA
bool "VGA (640x480)"
config BOARD_ATNGW100_EVKLCD10X_POW_QVGA
bool "Powertip QVGA (320x240)"
endchoice
avr32: Add support for Mediama RMTx add-on board for ATNGW100 Signed-off-by: Peter Ma <pma@mediamatech.com> Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
2009-06-08 18:55:35 +08:00
if BOARD_ATNGW100_MRMT
source "arch/avr32/boards/atngw100/Kconfig_mrmt"
endif
avr32: Add support for EVKLCD10X addon boards This patch lets the user enable support for EVKLCD100 and EVKLCD101 (refered to by EVKLCD10X). By enabling EVKLCD10X support the LCD controller and AC97 controller platform devices are added. The user can also choose between the EVKLCD100 (QVGA display) and the EVKLCD101 (VGA display), this is added to automagically select the correct panel timing and resolution parameters. Enabling support for EVKLCD10X addon board will cripple the MCI platform device a bit since they share two GPIO lines (detect and write-protect). These two lines are disabled when EVKLCD10X is enabled. The default configurations are based upon ATNGW100, but with added AC97C and LCDC driver. Virtual terminal is also enabled by default for EVKLCD10X boards. Verified on hardware with a NGW100 + EVKLCD100/101. Signed-off-by: Hans-Christian Egtvedt <hans-christian.egtvedt@atmel.com> Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
2008-07-01 16:29:27 +08:00
endif # BOARD_ATNGW100