IPoIB/cm: Connected mode is no longer EXPERIMENTAL

Connected mode is now tested and used by lots of people.  No need to
hide it under CONFIG_EXPERIMENTAL.

Signed-off-by: Roland Dreier <rolandd@cisco.com>
This commit is contained in:
Roland Dreier 2008-07-24 20:37:25 -07:00
parent fb2e405fc1
commit 99c3a5a9e3
1 changed files with 8 additions and 7 deletions
drivers/infiniband/ulp/ipoib

View File

@ -11,16 +11,17 @@ config INFINIBAND_IPOIB
config INFINIBAND_IPOIB_CM
bool "IP-over-InfiniBand Connected Mode support"
depends on INFINIBAND_IPOIB && EXPERIMENTAL
depends on INFINIBAND_IPOIB
default n
---help---
This option enables experimental support for IPoIB connected mode.
After enabling this option, you need to switch to connected mode through
/sys/class/net/ibXXX/mode to actually create connections, and then increase
the interface MTU with e.g. ifconfig ib0 mtu 65520.
This option enables support for IPoIB connected mode. After
enabling this option, you need to switch to connected mode
through /sys/class/net/ibXXX/mode to actually create
connections, and then increase the interface MTU with
e.g. ifconfig ib0 mtu 65520.
WARNING: Enabling connected mode will trigger some
packet drops for multicast and UD mode traffic from this interface,
WARNING: Enabling connected mode will trigger some packet
drops for multicast and UD mode traffic from this interface,
unless you limit mtu for these destinations to 2044.
config INFINIBAND_IPOIB_DEBUG