From a3718c1f230240361ed92d3e53342df0ff7efa8c Mon Sep 17 00:00:00 2001 From: Mark Lord Date: Sat, 19 Apr 2008 15:07:18 -0400 Subject: [PATCH] sata_mv: tidy host controller interrupt handling Tidy up host controller interrupt handling, by moving the weirdo bit shifting from mv_interrupt() to mv_host_intr(). This lets us take advantage of the MV_PORT_TO_SHIFT_AND_HARDPORT() macro from an earlier patch to greatly simplify the port numbering logic. Also, defer reading the hc_irq_cause (one per hc) until it is actually proven to be needed. This may save a microsecond or so per interrupt, on average (a later patchset will further reduce unnecessary register reads throughout the driver). Apart from that, we still leave the actual IRQ handling logic alone. Subsequent patches in this series will address that. Signed-off-by: Mark Lord Signed-off-by: Jeff Garzik --- drivers/ata/sata_mv.c | 107 ++++++++++++++++++------------------------ 1 file changed, 45 insertions(+), 62 deletions(-) diff --git a/drivers/ata/sata_mv.c b/drivers/ata/sata_mv.c index cee78f9e9d1b..97da46a86fdd 100644 --- a/drivers/ata/sata_mv.c +++ b/drivers/ata/sata_mv.c @@ -1693,50 +1693,48 @@ static void mv_process_crpb_entries(struct ata_port *ap, struct mv_port_priv *pp * LOCKING: * Inherited from caller. */ -static void mv_host_intr(struct ata_host *host, u32 relevant, unsigned int hc) +static int mv_host_intr(struct ata_host *host, u32 main_cause) { struct mv_host_priv *hpriv = host->private_data; - void __iomem *mmio = hpriv->base; - void __iomem *hc_mmio = mv_hc_base(mmio, hc); - u32 hc_irq_cause; - int port, port0, last_port; + void __iomem *mmio = hpriv->base, *hc_mmio = NULL; + u32 hc_irq_cause = 0; + unsigned int handled = 0, port; - if (hc == 0) - port0 = 0; - else - port0 = MV_PORTS_PER_HC; - - if (HAS_PCI(host)) - last_port = port0 + MV_PORTS_PER_HC; - else - last_port = port0 + hpriv->n_ports; - /* we'll need the HC success int register in most cases */ - hc_irq_cause = readl(hc_mmio + HC_IRQ_CAUSE_OFS); - if (!hc_irq_cause) - return; - - writelfl(~hc_irq_cause, hc_mmio + HC_IRQ_CAUSE_OFS); - - VPRINTK("ENTER, hc%u relevant=0x%08x HC IRQ cause=0x%08x\n", - hc, relevant, hc_irq_cause); - - for (port = port0; port < last_port; port++) { + for (port = 0; port < hpriv->n_ports; port++) { struct ata_port *ap = host->ports[port]; struct mv_port_priv *pp; - int have_err_bits, hardport, shift; - - if ((!ap) || (ap->flags & ATA_FLAG_DISABLED)) + unsigned int shift, hardport, port_cause; + /* + * When we move to the second hc, flag our cached + * copies of hc_mmio (and hc_irq_cause) as invalid again. + */ + if (port == MV_PORTS_PER_HC) + hc_mmio = NULL; + /* + * Do nothing if port is not interrupting or is disabled: + */ + MV_PORT_TO_SHIFT_AND_HARDPORT(port, shift, hardport); + port_cause = (main_cause >> shift) & (DONE_IRQ | ERR_IRQ); + if (!port_cause || !ap || (ap->flags & ATA_FLAG_DISABLED)) continue; + /* + * Each hc within the host has its own hc_irq_cause register. + * We defer reading it until we know we need it, right now: + * + * FIXME later: we don't really need to read this register + * (some logic changes required below if we go that way), + * because it doesn't tell us anything new. But we do need + * to write to it, outside the top of this loop, + * to reset the interrupt triggers for next time. + */ + if (!hc_mmio) { + hc_mmio = mv_hc_base_from_port(mmio, port); + hc_irq_cause = readl(hc_mmio + HC_IRQ_CAUSE_OFS); + writelfl(~hc_irq_cause, hc_mmio + HC_IRQ_CAUSE_OFS); + handled = 1; + } - pp = ap->private_data; - - shift = port << 1; /* (port * 2) */ - if (port >= MV_PORTS_PER_HC) - shift++; /* skip bit 8 in the HC Main IRQ reg */ - - have_err_bits = ((ERR_IRQ << shift) & relevant); - - if (unlikely(have_err_bits)) { + if (unlikely(port_cause & ERR_IRQ)) { struct ata_queued_cmd *qc; qc = ata_qc_from_tag(ap, ap->link.active_tag); @@ -1747,8 +1745,7 @@ static void mv_host_intr(struct ata_host *host, u32 relevant, unsigned int hc) continue; } - hardport = mv_hardport_from_port(port); /* range 0..3 */ - + pp = ap->private_data; if (pp->pp_flags & MV_PP_FLAG_EDMA_EN) { if ((DMA_IRQ << hardport) & hc_irq_cause) mv_process_crpb_entries(ap, pp); @@ -1757,10 +1754,10 @@ static void mv_host_intr(struct ata_host *host, u32 relevant, unsigned int hc) mv_intr_pio(ap); } } - VPRINTK("EXIT\n"); + return handled; } -static void mv_pci_error(struct ata_host *host, void __iomem *mmio) +static int mv_pci_error(struct ata_host *host, void __iomem *mmio) { struct mv_host_priv *hpriv = host->private_data; struct ata_port *ap; @@ -1798,6 +1795,7 @@ static void mv_pci_error(struct ata_host *host, void __iomem *mmio) ata_port_freeze(ap); } } + return 1; /* handled */ } /** @@ -1818,8 +1816,7 @@ static irqreturn_t mv_interrupt(int irq, void *dev_instance) { struct ata_host *host = dev_instance; struct mv_host_priv *hpriv = host->private_data; - unsigned int hc, handled = 0, n_hcs; - void __iomem *mmio = hpriv->base; + unsigned int handled = 0; u32 main_cause, main_mask; spin_lock(&host->lock); @@ -1829,26 +1826,12 @@ static irqreturn_t mv_interrupt(int irq, void *dev_instance) * Deal with cases where we either have nothing pending, or have read * a bogus register value which can indicate HW removal or PCI fault. */ - if (!(main_cause & main_mask) || (main_cause == 0xffffffffU)) - goto out_unlock; - - n_hcs = mv_get_hc_count(host->ports[0]->flags); - - if (unlikely((main_cause & PCI_ERR) && HAS_PCI(host))) { - mv_pci_error(host, mmio); - handled = 1; - goto out_unlock; /* skip all other HC irq handling */ + if ((main_cause & main_mask) && (main_cause != 0xffffffffU)) { + if (unlikely((main_cause & PCI_ERR) && HAS_PCI(host))) + handled = mv_pci_error(host, hpriv->base); + else + handled = mv_host_intr(host, main_cause); } - - for (hc = 0; hc < n_hcs; hc++) { - u32 relevant = main_cause & (HC0_IRQ_PEND << (hc * HC_SHIFT)); - if (relevant) { - mv_host_intr(host, relevant, hc); - handled = 1; - } - } - -out_unlock: spin_unlock(&host->lock); return IRQ_RETVAL(handled); }