Commit Graph

231 Commits

Author SHA1 Message Date
Paul Mackerras 398382999b powerpc: Compile fixes for chrp/nvram.c
Include asm/rtas.h for prototype for rtas_call etc., and make the
`done' variable unsigned int since that's what rtas_call wants.

Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-11-02 19:58:12 +11:00
Paul Mackerras 300230dcba powerpc: include <linux/platform_device.h> in pegasos_eth.c
Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-11-02 19:57:22 +11:00
Stephen Rothwell 2be7a90675 Merge Paulus' tree 2005-11-02 18:15:43 +11:00
Paul Mackerras fbf1769d08 powerpc: include lmb.h in arch/powerpc/platforms/powermac/setup.c
since it uses the lmb stuff in one place.

Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-11-02 16:07:22 +11:00
Stephen Rothwell aaf8a7a294 Merge iSeries include file move 2005-11-02 16:06:03 +11:00
David Gibson f11b7bd88f [PATCH] powerpc: Move naca.h to platforms/iseries
These days, the NACA only exists on iSeries.  Therefore, this patch
moves naca.h from include/asm-ppc64 to arch/powerpc/platforms/iseries.
There was one file including naca.h outside of platforms/iseries -
arch/ppc64/kernel/udbg_scc.c.  However, that's obviously a hangover
from older days.  The include is not necessary, so this patch simply
removes it.

Built and booted on iSeries, built for G5 (which uses udbg_scc.o).

Signed-off-by: David Gibson <dwg@au1.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-11-02 16:05:53 +11:00
David Gibson 9933f299d0 [PATCH] powerpc: Move dart.h
asm-ppc64/dart.h is included in exactly one place -
arch/powerpc/sysdev/u3_iommu.c.  This patch, therefore, moves it into
arch/powerpc/sysdev.  While we're at it, update the #ifndef/#define
protecting the include, and the filename in the comments of
u3_iommu.c.

Built and booted on pSeries and G5, built for ppc32 powermac.

Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-11-02 15:25:51 +11:00
Paul Mackerras 104dd65fef powerpc: clean up bug.h further
This simplifies the macros which are different between 32-bit and
64-bit.  It also fixes a couple of printks on the bug->line element,
which is now a long.

Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-11-02 15:19:47 +11:00
Kelly Daly b420677870 merge filename and modify references to iseries/vio.h
Signed-off-by: Kelly Daly <kelly@au.ibm.com>
2005-11-02 15:13:57 +11:00
Kelly Daly bbc8b628b0 merge filename and modify references to iSeries/mf.h
Signed-off-by: Kelly Daly <kelly@au.ibm.com>
2005-11-02 15:10:38 +11:00
Paul Mackerras a000503471 powerpc: exclude powerbook sleep code with CONFIG_PPC64 and CONFIG_PM
We were getting powerbook sleep code included, and giving compile
errors, with CONFIG_PM=y on a 64-bit build.  This excludes that code
so the kernel will compile.  One day BenH will implement on sleep on
the G5...

Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-11-02 15:08:17 +11:00
Paul Mackerras bccfd58842 powerpc: Fix compile error with CONFIG_TAU=y
A couple of instances of "i" that needed to be changed to "cpu_id"
got missed in the merge, because they were in CONFIG_TAU code.

Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-11-02 15:06:22 +11:00
Paul Mackerras 19fa17e5b1 powerpc: Use rtas_call not call_rtas in CHRP code
The nvram driver imported from the ppc code uses call_rtas, but
rtas_call is the name we are using in merged code (since ppc64 used
that name, and it uses far more RTAS calls than ppc32).

Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-11-02 15:04:26 +11:00
Kelly Daly c43a55ff4e merge filename and modify references to iseries/lpar_map.h
Signed-off-by: Kelly Daly <kelly@au.ibm.com>
2005-11-02 15:02:47 +11:00
Kelly Daly 59ce20bb34 merge filename and modify references to iseries/it_lp_reg_save.h
Signed-off-by: Kelly Daly <kelly@au.ibm.com>
2005-11-02 14:49:47 +11:00
Kelly Daly 8875ccfb7a merge filename and modify references to iseries/it_lp_queue.h
Signed-off-by: Kelly Daly <kelly@au.ibm.com>
2005-11-02 14:13:34 +11:00
Kelly Daly f218aab5cf merge filename and modify references to iseries/it_lp_naca.h
Signed-off-by: Kelly Daly <kelly@au.ibm.com>
2005-11-02 13:51:41 +11:00
Kelly Daly 7b487bb801 merge filename and modify references to iseries/it_exp_vpd_panel.h
Signed-off-by: Kelly Daly <kelly@au.ibm.com>
2005-11-02 13:48:25 +11:00
Kelly Daly 1ec65d76f3 merge filename and modify references to iseries/hv_types.h
Signed-off-by: Kelly Daly <kelly@au.ibm.com>
2005-11-02 13:46:07 +11:00
Kelly Daly e45423eac2 merge filename and modify references to iseries/hv_lp_event.h
Signed-off-by: Kelly Daly <kelly@au.ibm.com>
2005-11-02 12:08:31 +11:00
Kelly Daly 15b1718948 merge filename and modify reference to iseries/hv_lp_config.h
Signed-off-by: Kelly Daly <kelly@au.ibm.com>
2005-11-02 11:55:28 +11:00
Kelly Daly 8021b8a776 merge filename and modify references to iseries/hv_call_xm.h
Signed-off-by: Kelly Daly <kelly@au.ibm.com>
2005-11-02 11:41:12 +11:00
Kelly Daly 50592f5d2a merge filename and modify references to iseries/hv_call_sc.h
Signed-off-by: Kelly Daly <kelly@au.ibm.com>
2005-11-02 11:37:22 +11:00
Kelly Daly c0a8d05c8a merge filename and modify references to iseries/hv_call_event.h
Signed-off-by: Kelly Daly <kelly@au.ibm.com>
2005-11-02 11:11:11 +11:00
Paul Mackerras a39dbcf71e powerpc: Fix pseries (64-bit) build
A recent commit that removed rtas-fw.h and moved its contents to
include/asm-powerpc/rtas.h forgot to also remove the inclusion of
it in arch/powerpc/platforms/pseries/setup.c.

Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-11-01 22:37:47 +11:00
David Gibson a0e60b2033 [PATCH] powerpc: Merge bitops.h
Here's a revised version.  This re-introduces the set_bits() function
from ppc64, which I removed because I thought it was unused (it exists
on no other arch).  In fact it is used in the powermac interrupt code
(but not on pSeries).

- We use LARXL/STCXL macros to generate the right (32 or 64 bit)
  instructions, similar to LDL/STL from ppc_asm.h, used in fpu.S

- ppc32 previously used a full "sync" barrier at the end of
  test_and_*_bit(), whereas ppc64 used an "isync".  The merged version
  uses "isync", since I believe that's sufficient.

- The ppc64 versions of then minix_*() bitmap functions have changed
  semantics.  Previously on ppc64, these functions were big-endian
  (that is bit 0 was the LSB in the first 64-bit, big-endian word).
  On ppc32 (and x86, for that matter, they were little-endian.  As far
  as I can tell, the big-endian usage was simply wrong - I guess
  no-one ever tried to use minixfs on ppc64.

- On ppc32 find_next_bit() and find_next_zero_bit() are no longer
  inline (they were already out-of-line on ppc64).

- For ppc64, sched_find_first_bit() has moved from mmu_context.h to
  the merged bitops.  What it was doing in mmu_context.h in the first
  place, I have no idea.

- The fls() function is now implemented using the cntlzw instruction
  on ppc64, instead of generic_fls(), as it already was on ppc32.

- For ARCH=ppc, this patch requires adding arch/powerpc/lib to the
  arch/ppc/Makefile.  This in turn requires some changes to
  arch/powerpc/lib/Makefile which didn't correctly handle ARCH=ppc.

Built and running on G5.

Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-11-01 21:49:02 +11:00
Arnd Bergmann 811d4176f4 [PATCH] powerpc: move arch/ppc64/kernel/bpa* to arch/powerpc/platforms/cell
This patch simply moves files over to arch/powerpc without making
any changes to them.

Signed-off-by: Arnd Bergmann <arndb@de.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-11-01 21:03:07 +11:00
Arnd Bergmann edf03c1ee8 [PATCH] powerpc: move mmio_nvram.c over to arch/powerpc
The nvram code formally known as bpa_nvram.c is rather
generic really, so it is quite likely to be useful to
future boards not based on cell.

This patch puts it into arch/powerpc/sysdev.

Signed-off-by: Arnd Bergmann <arndb@de.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-11-01 21:03:04 +11:00
Arnd Bergmann e9add2eeb1 [PATCH] powerpc: move rtas_fw.c out of platforms/pseries
Cell uses the same code as pSeries for flashing the firmware
through rtas, so the implementation should not be part of
platforms/pseries.

Put it into arch/powerpc/kernel instead.

Signed-off-by: Arnd Bergmann <arndb@de.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-11-01 21:02:59 +11:00
Arnd Bergmann 19fe04755a [PATCH] powerpc: create a new arch/powerpc/platforms/cell/smp.c
During the conversion to the merge tree, the Cell specific
SMP initialization was removed from the pSeries code.

This creates a new Cell specific SMP implementation file.

Signed-off-by: Arnd Bergmann <arndb@de.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-11-01 21:02:53 +11:00
Arnd Bergmann f3f66f599d [PATCH] powerpc: Rename BPA to Cell
The official name for BPA is now CBEA (Cell Broadband
Engine Architecture). This patch renames all occurences
of the term BPA to 'Cell' for easier recognition.

Signed-off-by: Arnd Bergmann <arndb@de.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-11-01 21:02:44 +11:00
Kelly Daly 1da4403788 merge filename and modify references to iseries/hv_call.h
Signed-off-by: Kelly Daly <kelly@au.ibm.com>
2005-11-01 16:59:20 +11:00
Stephen Rothwell bec7c458b3 powerpc: make mem= work on iSeries again
By parsing the command line earlier, we can add the mem= value to the
flattened device tree and let the generic code sort out the memory limit
for us.

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
2005-11-01 14:34:30 +11:00
Stephen Rothwell 5015b49448 powerpc: fix __strnlen_user in merge tree
Change USER/KERNEL_DS so that the merged version of
__strnlen_user can be used which allows us to complete the
removal of arch/ppc64/lib/.

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
2005-11-01 14:34:17 +11:00
Paul Mackerras e2f2e58e79 powerpc: import a fix from arch/ppc/mm/pgtable.c
... namely, the change to the 2-argument pte_alloc_kernel.

Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-31 14:40:03 +11:00
Paul Mackerras 734d652480 powerpc: apply recent changes to merged code
Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-31 13:57:01 +11:00
Paul Mackerras 23fd07750a Merge ../linux-2.6 by hand 2005-10-31 13:37:12 +11:00
Paul Mackerras cf00a8d18b powerpc: Fix bug arising from having multiple memory_limit variables
We had a static memory_limit in prom.c, and then another one defined
in setup_64.c and used in numa.c, which resulted in the kernel crashing
when mem=xxx was given on the command line.  This puts the declaration
in system.h and the definition in mem.c.  This also moves the
definition of tce_alloc_start/end out of setup_64.c.

Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-31 13:07:02 +11:00
Paul Mackerras 5f6b5b973a powerpc: Fix time setting bug on 32-bit
This fixes a bug where settimeofday would set the wrong parameters
in do_gtod, resulting in gettimeofday returning a value about 4
hours after the correct time.  The bug was that we divided a
negative 64-bit value with do_div, which treated it as unsigned
and gave us a result that was approximately 1.8e10 too large
(since the divisor was 1e9).

Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-30 22:55:52 +11:00
Paul Mackerras eb66ce6333 powerpc: Remove T command from xmon help text since it no longer exists
Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-29 22:11:06 +10:00
Paul Mackerras 3ee1fcac33 powerpc: import a gfp_t fix to arch/powerpc/mm/pgtable_32.c
This applies the same fix as Al Viro recently made to
arch/ppc/mm/pgtable.c.

Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-29 22:10:38 +10:00
Paul Mackerras c1c3a554a3 powerpc: 32-bit needs cur_cpu_spec exported too
Somehow we ended up with an #ifdef CONFIG_PPC64 around the export
of cur_cpu_spec, but raid6 as a module needs it on ppc32 as well
as ppc64.

Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-29 22:08:55 +10:00
Paul Mackerras 0cb7b2afd7 powerpc: Merge maple support code to arch/powerpc/platforms/maple
Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-29 22:07:56 +10:00
Paul Mackerras d3f67fbb96 powerpc: Add -mno-altivec for ARCH=powerpc builds
Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-29 15:31:17 +10:00
Andy Whitcroft ffa27b6bc6 [PATCH] ppc64 memory model depends on NUMA
Currently when we first select memory model (FLAT, DISCONTIG, SPARSE) then
select whether the machine is NUMA.  However NUMA systems may not be FLAT.
This constraint it not honoured and we may configure a NUMA/FLAT system.

Reorder the configuration such that we choose NUMA first which allows us to
only list the memory models which are valid.  We now default NUMA for known
NUMA systems.  Note that this new order also matches that used in x86.

Signed-off-by: Andy Whitcroft <apw@shadowen.org>
Signed-off-by: Joel Schopp <jschopp@austin.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-29 15:27:39 +10:00
Olaf Hering ea6526605a [PATCH] ppc64: remove duplicate local variable in set_preferred_console
remove duplicate local variable, saves 2 asm instructions.

Signed-off-by: Olaf Hering <olh@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-29 15:23:08 +10:00
Nicolas DET dd03d25fac [PATCH] chrp_pegasos_eth: Added Marvell Discovery II SRAM support
Add proper entry to support the Marvell MV64361 (Marvell Discovery II)
SRAM.

This feature may be used by the mv643xx_eth driver.

Signed-off-by: Nicolas DET <det.nicolas@free.fr>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-29 14:41:08 +10:00
Olaf Hering 35e95e6399 [PATCH] ppc32: nvram driver for chrp
This implements a nvram acccess method, similar to
arch/ppc64/kernel/pSeries_nvram.c tested on CHRP B50.

Signed-off-by: Olaf Hering <olh@suse.de>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-29 14:35:00 +10:00
Roland Dreier 8b150478ae [PATCH] ppc: make phys_mem_access_prot() work with pfns instead of addresses
Change the phys_mem_access_prot() function to take a pfn instead of an
address.  This allows mmap64() to work on /dev/mem for addresses above 4G
on 32-bit architectures.  We start with a pfn in mmap_mem(), so there's no
need to convert to an address; in fact, it's actively bad, since the
conversion can overflow when the address is above 4G.

Similarly fix the ppc32 page_is_ram() function to avoid a conversion to an
address by directly comparing to max_pfn.  Working with max_pfn instead of
high_memory fixes page_is_ram() to give the right answer for highmem pages.

Signed-off-by: Roland Dreier <rolandd@cisco.com>
Cc: Anton Blanchard <anton@samba.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-29 14:25:49 +10:00
Paul Mackerras f78541dcec powerpc: Merge xmon
The merged version follows the ppc64 version pretty closely mostly,
and in fact ARCH=ppc64 now uses the arch/powerpc/xmon version.
The main difference for ppc64 is that the 'p' command to call
show_state (which was always pretty dodgy) has been replaced by
the ppc32 'p' command, which calls a given procedure (so in fact
the old 'p' command behaviour can be achieved with 'p $show_state').

Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-28 22:53:37 +10:00