Commit Graph

79 Commits

Author SHA1 Message Date
David Gibson 35cd8785de [PATCH] powerpc: Move udbg code to arch/powerpc
Since the udbg code in ppc64 has no ppc32 equivalent, move it straight
over into arch/powerpc (and include/asm-powerpc for udbg.h).  In time,
we probably want to meld the various bits and pieces of 32-bit early
debugging code into udbg, but for now only include it on
CONFIG_PPC64=y builds.  The only change during the move is to
standardise the protecting #ifdef/#define in udbg.h, and move its
banner comment above the initial #ifdef (which seems to be normal
practice).

Built and booted on POWER5 LPAR (ARCH=powerpc and ARCH=ppc64).  Built
for 32bit multiplatform (ARCH=powerpc).

Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-11-11 22:23:34 +11:00
David Gibson d3d2176a0b [PATCH] powerpc: Move more ppc64 files with no ppc32 equivalent to powerpc
This patch moves a bunch more files from arch/ppc64 and
include/asm-ppc64 which have no equivalents in ppc32 code into
arch/powerpc and include/asm-powerpc.  The file affected are:
	hvcall.h
	proc_ppc64.c
	sysfs.c
	lparcfg.c
	rtas_pci.c

The only changes apart from the move and corresponding Makefile
changes are:
	- #ifndef/#define in includes updated to _ASM_POWERPC_ form
	- trailing whitespace removed
	- comments giving full paths removed

Built and booted on POWER5 LPAR (ARCH=powerpc and ARCH=ppc64), built
for 32-bit powermac (ARCH=powerpc).

Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-11-10 15:32:37 +11:00
David Gibson f6d3577da1 [PATCH] powerpc: Move scanlog.c to platforms/pseries
scanlog.c is only compiled on pSeries.  Thus, this patch moves it to
platforms/pseries.

Built and booted on pSeries LPAR (ARCH=powerpc and ARCH=ppc64).  Built
for iSeries (ARCH=powerpc).

Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-11-10 13:09:27 +11:00
Paul Mackerras e130bedb7c Merge git://oak/home/sfr/kernels/iseries/work 2005-11-10 13:08:55 +11:00
Linas Vepstas 7f79da7acc [PATCH] ppc64: move eeh.c to powerpc directory from ppc64
11-eeh-move-to-powerpc.patch

Move arch/ppc64/kernel/eeh.c to arch//powerpc/platforms/pseries/eeh.c
No other changes (except for Makefile to build it)

Signed-off-by: Linas Vepstas <linas@austin.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-11-10 11:37:59 +11:00
David Gibson 8882a4da1c [PATCH] powerpc: Move various ppc64 files with no ppc32 equivalent to powerpc
This patch moves a bunch of files from arch/ppc64 and
include/asm-ppc64 which have no equivalents in ppc32 code into
arch/powerpc and include/asm-powerpc.  The file affected are:
	abs_addr.h
	compat.h
	lppaca.h
	paca.h
	tce.h
	cpu_setup_power4.S
	ioctl32.c
	firmware.c
	pacaData.c

The only changes apart from the move and corresponding Makefile
changes are:
	- #ifndef/#define in includes updated to _ASM_POWERPC_ form
	- trailing whitespace removed
	- comments giving full paths removed
	- pacaData.c renamed paca.c to remove studlyCaps
	- Misplaced { moved in lppaca.h

Built and booted on POWER5 LPAR (ARCH=powerpc and ARCH=ppc64), built
for 32-bit powermac (ARCH=powerpc).

Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-11-10 11:24:04 +11:00
Stephen Rothwell 756e7104fe powerpc: merge irq.c
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
2005-11-09 18:07:45 +11:00
Paul Mackerras 5ad5707861 powerpc: Merge smp.c and smp.h
This also moves setup_cpu_maps to setup-common.c (calling it
smp_setup_cpu_maps) and uses it on both 32-bit and 64-bit.

Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-11-05 10:33:55 +11:00
Paul Mackerras 8ad200d7b7 powerpc: Merge smp-tbsync.c (the generic timebase sync routine)
Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-11-04 13:28:58 +11:00
Stephen Rothwell 62f4f47da6 powerpc: move ppc64/kernel/signal.c to arch/powerpc
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
2005-11-03 16:03:20 +11:00
Paul Mackerras f4fcbbe9a7 powerpc: Merge remaining RTAS code
This moves rtas-proc.c and rtas_flash.c into arch/powerpc/kernel, since
cell wants them as well as pseries (and chrp can use rtas-proc.c too,
at least in principle).  rtas_fw.c is gone, with its bits moved into
rtas_flash.c and rtas.c.

Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-11-03 14:41:19 +11:00
David Gibson a0e60b2033 [PATCH] powerpc: Merge bitops.h
Here's a revised version.  This re-introduces the set_bits() function
from ppc64, which I removed because I thought it was unused (it exists
on no other arch).  In fact it is used in the powermac interrupt code
(but not on pSeries).

- We use LARXL/STCXL macros to generate the right (32 or 64 bit)
  instructions, similar to LDL/STL from ppc_asm.h, used in fpu.S

- ppc32 previously used a full "sync" barrier at the end of
  test_and_*_bit(), whereas ppc64 used an "isync".  The merged version
  uses "isync", since I believe that's sufficient.

- The ppc64 versions of then minix_*() bitmap functions have changed
  semantics.  Previously on ppc64, these functions were big-endian
  (that is bit 0 was the LSB in the first 64-bit, big-endian word).
  On ppc32 (and x86, for that matter, they were little-endian.  As far
  as I can tell, the big-endian usage was simply wrong - I guess
  no-one ever tried to use minixfs on ppc64.

- On ppc32 find_next_bit() and find_next_zero_bit() are no longer
  inline (they were already out-of-line on ppc64).

- For ppc64, sched_find_first_bit() has moved from mmu_context.h to
  the merged bitops.  What it was doing in mmu_context.h in the first
  place, I have no idea.

- The fls() function is now implemented using the cntlzw instruction
  on ppc64, instead of generic_fls(), as it already was on ppc32.

- For ARCH=ppc, this patch requires adding arch/powerpc/lib to the
  arch/ppc/Makefile.  This in turn requires some changes to
  arch/powerpc/lib/Makefile which didn't correctly handle ARCH=ppc.

Built and running on G5.

Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-11-01 21:49:02 +11:00
Arnd Bergmann 811d4176f4 [PATCH] powerpc: move arch/ppc64/kernel/bpa* to arch/powerpc/platforms/cell
This patch simply moves files over to arch/powerpc without making
any changes to them.

Signed-off-by: Arnd Bergmann <arndb@de.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-11-01 21:03:07 +11:00
Arnd Bergmann edf03c1ee8 [PATCH] powerpc: move mmio_nvram.c over to arch/powerpc
The nvram code formally known as bpa_nvram.c is rather
generic really, so it is quite likely to be useful to
future boards not based on cell.

This patch puts it into arch/powerpc/sysdev.

Signed-off-by: Arnd Bergmann <arndb@de.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-11-01 21:03:04 +11:00
Arnd Bergmann f3f66f599d [PATCH] powerpc: Rename BPA to Cell
The official name for BPA is now CBEA (Cell Broadband
Engine Architecture). This patch renames all occurences
of the term BPA to 'Cell' for easier recognition.

Signed-off-by: Arnd Bergmann <arndb@de.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-11-01 21:02:44 +11:00
Paul Mackerras 0cb7b2afd7 powerpc: Merge maple support code to arch/powerpc/platforms/maple
Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-29 22:07:56 +10:00
David Gibson 007e8f51b2 [PATCH] powerpc: Move xics.[ch] into platforms/pseries
This patch moves the XICS interrupt controller code into the
platforms/pseries directory, since it only appears on pSeries
machines.  If it ever appears on some other machine we can move it to
sysdev, although xics.c itself will need a bunch of changes in that
case to remove pSeries specific assumptions.

Signed-off-by: David Gibson <dwg@au1.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-28 16:39:19 +10:00
Stephen Rothwell 640768eef2 ppc64: use the merged syscall table
This allows us to also use entry_64.S from the merged tree and reverts
the setup_64.c part of fda262b897.

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
2005-10-28 12:51:45 +10:00
Paul Mackerras 09eee63471 powerpc: Move U3 IOMMU driver to arch/powerpc/sysdev
Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-28 08:29:36 +10:00
Paul Mackerras fda262b897 [PATCH] ppc64: remove arch/ppc64/kernel/setup.c
and use setup_64.c from the merged tree instead.  The only difference
between them was the code to set up the syscall maps.

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-27 20:20:42 +10:00
Paul Mackerras 033ef338b6 powerpc: Merge rtas.c into arch/powerpc/kernel
This splits arch/ppc64/kernel/rtas.c into arch/powerpc/kernel/rtas.c,
which contains generic RTAS functions useful on any CHRP platform,
and arch/powerpc/platforms/pseries/rtas-fw.[ch], which contain
some pSeries-specific firmware flashing bits.  The parts of rtas.c
that are to do with pSeries-specific error logging are protected
by a new CONFIG_RTAS_ERROR_LOGGING symbol.  The inclusion of rtas.o
is controlled by the CONFIG_PPC_RTAS symbol, and the relevant
platforms select that.

Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-26 17:05:24 +10:00
Paul Mackerras f9bd170a87 powerpc: Merge i8259.c into arch/powerpc/sysdev
This changes the parameters for i8259_init so that it takes two
parameters: a physical address for generating an interrupt
acknowledge cycle, and an interrupt number offset.  i8259_init
now sets the irq_desc[] for its interrupts; all the callers
were doing this, and that code is gone now.  This also defines
a CONFIG_PPC_I8259 symbol to select i8259.o for inclusion, and
makes the platforms that need it select that symbol.

Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-26 16:47:42 +10:00
Michael Ellerman d9953105ce [PATCH] powerpc: Move ras.c into arch/powerpc/platforms/pseries
ras.o is only built for CONFIG_PPC_PSERIES, so move it into
arch/powerpc/platforms/pseries. Update Makefiles to suit.

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-26 16:00:29 +10:00
Stephen Rothwell 580460194e powerpc: Merge arch/ppc64/kernel/vio.c into arch/powerpc/kernel/vio.c
Merge arch/ppc64/kernel/vio.c into arch/powerpc/kernel/vio.c, update
the Makefiles to make it work, and make ARCH=ppc64 still work.

Michael's version put vio.c in arch/powerpc/sysedv but after consolting
Paulus, this one puts it in arch/powerpc/kernel.

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
2005-10-24 15:41:44 +10:00
Paul Mackerras 8342894475 ppc64: Use arch/powerpc/platforms/powermac for powermac build.
This switches the ARCH=ppc64 build to use arch/powerpc/platforms/powermac
instead of arch/ppc64/kernel/pmac*, and deletes the latter set of files.

Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-22 16:06:27 +10:00
Paul Mackerras d85b525e6e ppc64: Use the merged mpic.c
This means we now compile in arch/powerpc/sysdev for ARCH=ppc64.

Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-20 21:06:44 +10:00
David Gibson f7f6f4fea6 [PATCH] powerpc: Merge ppc64 pmc.[ch] with ppc32 perfmon.[ch]
This patches the ppc32 and ppc64 versions of the headers and .c files
with helper functions for manipulating the performance counting
hardware.  As a side effect, it removes use of the term "perfmon" from
ppc32, thus avoiding confusion with the unrelated performance counter
interface from HP Labs also called "perfmon".

Built, but not booted, for g5, pSeries, iSeries, and 32-bit Powermac
with both ARCH=powerpc and ARCH=ppc{,64} as appropriate.

Signed-off-by: David Gibson <dwg@au1.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-20 16:22:24 +10:00
Paul Mackerras f2783c1500 powerpc: Merge time.c and asm/time.h.
We now use the merged time.c for both 32-bit and 64-bit compilation
with ARCH=powerpc, and for ARCH=ppc64, but not for ARCH=ppc32.
This removes setup_default_decr (folds its function into time_init)
and moves wakeup_decrementer into time.c.  This also makes an
asm-powerpc/rtc.h.

Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-20 09:23:26 +10:00
Paul Mackerras b123923d48 powerpc: Move ptrace32.c from arch/ppc64 to arch/powerpc
Also corrected my email address in ptrace.c and updated the comments
at the top of ptrace32.c.

Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-20 09:11:29 +10:00
Stephen Rothwell 81e7009ea4 powerpc: merge ppc signal.c and ppc64 signal32.c
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
2005-10-18 11:17:58 +10:00
Paul Mackerras 30286ef6e0 powerpc: Merge syscalls.c and sys_ppc32.c.
Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-17 20:10:13 +10:00
Stephen Rothwell e8a30302ab powerpc: merge ptrace.c
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
2005-10-13 15:52:04 +10:00
Stephen Rothwell eec5ef9098 ppc64: use powerpc of_device.c
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
2005-10-13 15:16:25 +10:00
Stephen Rothwell ae2752050d ppc64: fix arch/ppc64/kernel/Makefile
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
2005-10-13 14:12:25 +10:00
Stephen Rothwell d4bf9a7858 ppc64: merge binfmt_elf32.c
and use start_thread for both 32 and 64 bit bineries.

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
2005-10-13 13:40:54 +10:00
Stephen Rothwell 4920960f57 powerpc: consolidate cputable.c
Also simplify arch/ppc64/kernel/Makefile

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
2005-10-13 09:49:45 +10:00
Paul Mackerras 3abec857a0 ppc64: Use merged versions of init_task.c and process.c.
These two files are now built in arch/powerpc/kernel instead of
arch/ppc64/kernel.

Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-11 22:09:48 +10:00
Paul Mackerras 40ef8cbc6d powerpc: Get 64-bit configs to compile with ARCH=powerpc
This is a bunch of mostly small fixes that are needed to get
ARCH=powerpc to compile for 64-bit.  This adds setup_64.c from
arch/ppc64/kernel/setup.c and locks.c from arch/ppc64/lib/locks.c.

Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-10 22:50:37 +10:00
Paul Mackerras bc6f8a4b19 powerpc: move lparmap.c to arch/powerpc/kernel
Since lparmap.s gets included in arch/powerpc/kernel/head_64.S,
this avoids depending on a file in another directory.

Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-10 22:45:07 +10:00
Paul Mackerras 69a80d3f69 powerpc: move pSeries files to arch/powerpc/platforms/pseries
Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-10 22:03:41 +10:00
Paul Mackerras a432403a89 ppc64: Use the merged lmb routines
The only real change here is that lmb_enforce_memory_limit now takes
the memory_limit as a parameter instead of as a global variable.

Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-10 20:49:07 +10:00
Stephen Rothwell cabb558714 powerpc: make iSeries build
Merge vmlinux.lds.S.
Also remove arch/powerpc/kernel/vmlinux.lds which is a
generated file.

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
2005-10-01 18:52:10 +10:00
Stephen Rothwell bd142b70a6 ppc64: simplify the build a little
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
2005-10-01 18:51:12 +10:00
Stephen Rothwell dc1c1ca3dc powerpc: merge idle_power4.S and trapc.s
Use idle_power4.S from ppc64 as we are not going to support
32 bit power4 in the merged tree.

Merge ppc64 traps.c into powerpc traps.c:
	use ppc64 versions of exception routine names
		(as they don't have StudlyCaps)
	make all the versions if die() have the same
		prototype

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
2005-10-01 18:43:42 +10:00
Stephen Rothwell d96024c688 powerpc: Move lparmap.c to powerpc/platforms
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
2005-09-30 18:04:10 +10:00
Stephen Rothwell dcff1b170b powerpc: remove old vector.S files
Update old kernel/Makefiles to cope

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
2005-09-30 18:04:03 +10:00
Stephen Rothwell d223e721b7 powerpc: Move viopath.c to powerpc/platforms/iseries
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
2005-09-28 03:12:35 +10:00
Stephen Rothwell b6b8681843 powerpc: Move iSeries_smp.c to powerpc/platforms/iseries
And rename it to smp.c.

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
2005-09-28 03:07:14 +10:00
Stephen Rothwell ed7f2c05de powerpc: Move iSeries_vio.c to powerpc/platforms/iseries
And rename it to vio.c.

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
2005-09-28 03:03:00 +10:00
Stephen Rothwell da3420fcd6 powerpc: Move iSeries_VpdInfo.c to powerpc/platforms/iseries
And rename it to vpdinfo.c.

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
2005-09-28 02:59:19 +10:00