Commit Graph

2638 Commits

Author SHA1 Message Date
Ralf Baechle 7e35952baa Move Origin crapola into a machine-specific header file.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2005-10-29 19:31:52 +01:00
Ralf Baechle a0c3a5b5a8 Prevent gcc from optimizing a few functions away completly.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2005-10-29 19:31:52 +01:00
Ralf Baechle 8f40611d2b Detect the MIPS R2 vectored interrupt, external interrupt controller
options and the precense of the MT ASE.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2005-10-29 19:31:51 +01:00
Ralf Baechle 55d04dff0f New kernel option nowait allows disabling the use of the wait instruction.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2005-10-29 19:31:48 +01:00
Ralf Baechle 569f75bd02 Use an irq_enable_hazard hazard barrier in unmask_mips_irq. This
hasn't been an actual bug, so it's more a change to be 100% compliant
with the requirements of the architecture spec.  Similar fix to
mask_mips_irq where there was a slightly less theoretical chance of
getting hit.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2005-10-29 19:31:48 +01:00
Ralf Baechle 7db36c858c Add inotify syscalls for MIPS.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2005-10-29 19:31:47 +01:00
Ralf Baechle ec74e361f1 Mark a few variables __read_mostly.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2005-10-29 19:31:46 +01:00
Ralf Baechle cc61c1fede MIPS R2 instruction hazard handling.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2005-10-29 19:31:46 +01:00
Ralf Baechle bbc7f22f6d Detect the 34K.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2005-10-29 19:31:45 +01:00
Ralf Baechle 079ef8bb80 Generate code for MIPS32 / MIPS64 Release 2 if configured for one of
these architectures.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2005-10-29 19:31:45 +01:00
Ralf Baechle 1e5f1caa5d MIPS 32/64 R2 config option.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2005-10-29 19:31:44 +01:00
Ralf Baechle e5de3b4687 In pcibios_enable_resources go back to handling all PCI_NUM_RESOURCES
resources.  We tried previous but ran into problems ...

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2005-10-29 19:31:43 +01:00
Ralf Baechle e80de8503c Use Kconfig.preempt.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2005-10-29 19:31:42 +01:00
Ralf Baechle 60080265a1 Define kmap_atomic_pfn() for MIPS.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2005-10-29 19:31:42 +01:00
Ralf Baechle 129bc8f78b Setup_frame is now returning a success value.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2005-10-29 19:31:41 +01:00
Ralf Baechle b490ff4270 Temporary hack for Qemu and MIPSsim until they get a proper ELF loader.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2005-10-29 19:31:41 +01:00
Ralf Baechle 3ef33e68c1 Date: Fri Jul 8 20:10:17 2005 +0000
Those literals are long.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2005-10-29 19:31:40 +01:00
Thiemo Seufer 4552074577 IP30 Identification.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Thiemo Seufer <ths@networkno.de>
2005-10-29 19:31:39 +01:00
Thiemo Seufer 85f14bf2cb ... and it isn't a canonicalized triplet but just the n-plet used to
configure gcc.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Thiemo Seufer <ths@networkno.de>
2005-10-29 19:31:38 +01:00
Thiemo Seufer 73f74e23a6 Grep deesn't like shell-style matching...
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Thiemo Seufer <ths@networkno.de>
2005-10-29 19:31:37 +01:00
Thiemo Seufer f425a6dce5 Hack to make compiles for the other endianness easier.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Thiemo Seufer <ths@networkno.de>
2005-10-29 19:31:37 +01:00
Ralf Baechle 6e760c8dae Rename CONFIG_CPU_MIPS{32,64} to CONFIG_CPU_MIPS{32|64}_R1.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2005-10-29 19:31:37 +01:00
Ralf Baechle ca4973dd55 Don't redeclare ll_local_timer_interrupt.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2005-10-29 19:31:36 +01:00
Thiemo Seufer 50bd2c72ca Brian Murphy says:
this fixes Lasat pci to work with multi-function devices by assigning
    the correct values based on pin number (instead of ignoring them).

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Thiemo Seufer <ths@networkno.de>
2005-10-29 19:31:36 +01:00
Thiemo Seufer ec125c129e Code cleanup, thanks Brian Murphy.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Thiemo Seufer <ths@networkno.de>
2005-10-29 19:31:35 +01:00
Maciej W. Rozycki a5fc9c0bbe Use physical addresses at the interface level, letting drivers remap
them as appropriate.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2005-10-29 19:31:35 +01:00
Maciej W. Rozycki 2c93e12cfe Avoid tlbw* hazards for the R4600/R4700/R5000.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2005-10-29 19:31:34 +01:00
Maciej W. Rozycki c3455b0efc Inline ioremap() calls for constant addresses that map to KSEG1.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2005-10-29 19:31:34 +01:00
Ralf Baechle c134a5ecdb Avoid defining variables in the middle of a block which breaks older
compilers.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2005-10-29 19:31:33 +01:00
Maciej W. Rozycki 4c0a2d4275 Fix the diagnostic dump for the XTLB refill handler.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2005-10-29 19:31:32 +01:00
Maciej W. Rozycki 41986a6e7e Fix a diagnostic message.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2005-10-29 19:31:32 +01:00
Ralf Baechle 362b1d546d Conversion to plat_setup() for TX4927 also.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2005-10-29 19:31:32 +01:00
Ralf Baechle 01d42abdf3 Using get_nasid() to find the console node will blow up nicely if
called on a another node than the console node, so use the master_nasid
instead and in the unlikely case that one isn't initialized yet, fall
back to get_nasid().

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2005-10-29 19:31:31 +01:00
Maciej W. Rozycki c4559f67b7 Always use ".set mips3" rather than select between "mips2" or "mips3"
for assembling ll/sc sequences to avoid problems with 64-bit
configurations.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2005-10-29 19:31:31 +01:00
Maciej W. Rozycki 69c75fb458 Actual handlers for bus errors for Pmax and 3min.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

diff --git a/arch/mips/dec/kn01-berr.c b/arch/mips/dec/kn01-berr.c
new file mode 100644
2005-10-29 19:31:30 +01:00
Maciej W. Rozycki 64dac503e8 System-specific handling of bus errors for DECstation variations
supporting parity errors only for memory (Pmax/3min/Maxine).
Fixes for resources decoded by the KN04/KN05 MB ASIC.  Additional
clean-ups for the ECC handler.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2005-10-29 19:31:30 +01:00
Maciej W. Rozycki 3b2396d972 Use correct names for bits in the R3k cp0.status register.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2005-10-29 19:31:29 +01:00
Maciej W. Rozycki c6ad7b7d3c Use macros for the RM7k cp0.config bits instead of magic numbers.
Minor clean-ups.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2005-10-29 19:31:28 +01:00
Maciej W. Rozycki 8a185d14b6 Fix types for firmware arguments. Don't define unneeded messages.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2005-10-29 19:31:27 +01:00
Maciej W. Rozycki 260c96738c Mark __die() "noreturn" for real.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2005-10-29 19:31:26 +01:00
Maciej W. Rozycki 3bd4c902da Deal with the bloody KSEG vs CKSEG horror...
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2005-10-29 19:31:23 +01:00
Maciej W. Rozycki 902d21d531 There is NO port I/O space on the DECstation. Minor clean-ups.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2005-10-29 19:31:23 +01:00
Ralf Baechle 02416dcf5a Redo RM9000 workaround which along with other DSP ASE changes was
causing some headache for debuggers knowing about signal frames.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2005-10-29 19:31:23 +01:00
Maciej W. Rozycki aac8aa7717 Enable a suitable ISA for the assembler around ll/sc so that code
builds even for processors that don't support the instructions.
Plus minor formatting fixes.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2005-10-29 19:31:22 +01:00
Maciej W. Rozycki fded2e508a Optimize R3k TLB Load/Store/Modified handlers, by scheduling
delay slots properly and avoiding an unnecessary jump to a jump.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2005-10-29 19:31:22 +01:00
Maciej W. Rozycki d925c262dd Fill R3k load delay slots properly.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2005-10-29 19:31:21 +01:00
Maciej W. Rozycki 9678e28b1a Only dump instructions actually emitted.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2005-10-29 19:31:21 +01:00
Maciej W. Rozycki 68e4a86c80 This interrupt is *always* handled -- MIPS_BE_DISCARD just means
no further action wanted.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2005-10-29 19:31:20 +01:00
Maciej W. Rozycki d5b6f1db5d For MIPS32/MIPS64 cp0.config.mt == 1 implies a standard (R4k-style)
TLB, so no need to set it separately for each implementation.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2005-10-29 19:31:19 +01:00
Steven J. Hill 81731f7997 The DbAu1500 board also support big endian. Gee, imagine that.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2005-10-29 19:31:18 +01:00