Replace acpi_in_resume with a more general hack
to check irqs_disabled() on any kmalloc() from ACPI.
While setting (system_state != SYSTEM_RUNNING) on resume
seemed more general, Andrew Morton preferred this approach.
http://bugzilla.kernel.org/show_bug.cgi?id=3469
Make acpi_os_allocate() into an inline function to
allow /proc/slab_allocators to work.
Delete some memset() that could fault on allocation failure.
Signed-off-by: Len Brown <len.brown@intel.com>
Implemented a new acpi_spinlock type for the OSL lock
interfaces. This allows the type to be customized to
the host OS for improved efficiency (since a spinlock is
usually a very small object.)
Implemented support for "ignored" bits in the ACPI
registers. According to the ACPI specification, these
bits should be preserved when writing the registers via
a read/modify/write cycle. There are 3 bits preserved
in this manner: PM1_CONTROL[0] (SCI_EN), PM1_CONTROL[9],
and PM1_STATUS[11].
http://bugzilla.kernel.org/show_bug.cgi?id=3691
Implemented the initial deployment of new OSL mutex
interfaces. Since some host operating systems have
separate mutex and semaphore objects, this feature was
requested. The base code now uses mutexes (and the new
mutex interfaces) wherever a binary semaphore was used
previously. However, for the current release, the mutex
interfaces are defined as macros to map them to the
existing semaphore interfaces.
Fixed several problems with the support for the control
method SyncLevel parameter. The SyncLevel now works
according to the ACPI specification and in concert with the
Mutex SyncLevel parameter, since the current SyncLevel is
a property of the executing thread. Mutual exclusion for
control methods is now implemented with a mutex instead
of a semaphore.
Fixed three instances of the use of the C shift operator
in the bitfield support code (exfldio.c) to avoid the use
of a shift value larger than the target data width. The
behavior of C compilers is undefined in this case and can
cause unpredictable results, and therefore the case must
be detected and avoided. (Fiodor Suietov)
Added an info message whenever an SSDT or OEM table
is loaded dynamically via the Load() or LoadTable()
ASL operators. This should improve debugging capability
since it will show exactly what tables have been loaded
(beyond the tables present in the RSDT/XSDT.)
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Replaced the acpi_os_queue_for_execution() with a new
interface named acpi_os_execute(). The major difference is
that the new interface does not have a Priority parameter,
this appeared to be useless and has been replaced by
a Type parameter. The Type tells the OS what type of
execution is being requested, such as global lock handler,
notify handler, GPE handler, etc. This allows the host
to queue and execute the request as appropriate for the
request type, possibly using different work queues and
different priorities for the various request types. This
enables fixes for multithreading deadlock problems such as
http://bugzilla.kernel.org/show_bug.cgi?id=5534
(Alexey Starikovskiy and Bob Moore)
Fixed a possible memory leak associated with the
support for the so-called "implicit return" ACPI
extension. Reported by FreeBSD (Fiodor Suietov)
http://bugzilla.kernel.org/show_bug.cgi?id=6514
Fixed a problem with the Load() operator where a table
load from an operation region could overwrite an internal
table buffer by up to 7 bytes and cause alignment faults
on IPF systems. (With assistance from Luming Yu)
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Removed a device initialization optimization introduced in
20051216 where the _STA method was not run unless an _INI
was also present for the same device. This optimization
could cause problems because it could allow _INI methods
to be run within a not-present device subtree (If a
not-present device had no _INI, _STA would not be run,
the not-present status would not be discovered, and the
children of the device would be incorrectly traversed.)
Implemented a new _STA optimization where namespace
subtrees that do not contain _INI are identified and
ignored during device initialization. Selectively running
_STA can significantly improve boot time on large machines
(with assistance from Len Brown.)
Implemented support for the device initialization case
where the returned _STA flags indicate a device not-present
but functioning. In this case, _INI is not run, but the
device children are examined for presence, as per the
ACPI specification.
Implemented an additional change to the IndexField support
in order to conform to MS behavior. The value written to
the Index Register is not simply a byte offset, it is a
byte offset in units of the access width of the parent
Index Field. (Fiodor Suietov)
Defined and deployed a new OSL interface,
acpi_os_validate_address(). This interface is called during
the creation of all AML operation regions, and allows
the host OS to exert control over what addresses it will
allow the AML code to access. Operation Regions whose
addresses are disallowed will cause a runtime exception
when they are actually accessed (will not affect or abort
table loading.)
Defined and deployed a new OSL interface,
acpi_os_validate_interface(). This interface allows the host OS
to match the various "optional" interface/behavior strings
for the _OSI predefined control method as appropriate
(with assistance from Bjorn Helgaas.)
Restructured and corrected various problems in the
exception handling code paths within DsCallControlMethod
and DsTerminateControlMethod in dsmethod (with assistance
from Takayoshi Kochi.)
Modified the Linux source converter to ignore quoted string
literals while converting identifiers from mixed to lower
case. This will correct problems with the disassembler
and other areas where such strings must not be modified.
The ACPI_FUNCTION_* macros no longer require quotes around
the function name. This allows the Linux source converter
to convert the names, now that the converter ignores
quoted strings.
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Implemented header file support for the following
additional ACPI tables: ASF!, BOOT, CPEP, DBGP, MCFG, SPCR,
SPMI, TCPA, and WDRT. With this support, all current and
known ACPI tables are now defined in the ACPICA headers and
are available for use by device drivers and other software.
Implemented support to allow tables that contain ACPI
names with invalid characters to be loaded. Previously,
this would cause the table load to fail, but since
there are several known cases of such tables on
existing machines, this change was made to enable
ACPI support for them. Also, this matches the
behavior of the Microsoft ACPI implementation.
https://bugzilla.novell.com/show_bug.cgi?id=147621
Fixed a couple regressions introduced during the memory
optimization in the 20060317 release. The namespace
node definition required additional reorganization and
an internal datatype that had been changed to 8-bit was
restored to 32-bit. (Valery Podrezov)
Fixed a problem where a null pointer passed to
acpi_ut_delete_generic_state() could be passed through
to acpi_os_release_object which is unexpected. Such
null pointers are now trapped and ignored, matching
the behavior of the previous implementation before the
deployment of acpi_os_release_object(). (Valery Podrezov,
Fiodor Suietov)
Fixed a memory mapping leak during the deletion of
a SystemMemory operation region where a cached memory
mapping was not deleted. This became a noticeable problem
for operation regions that are defined within frequently
used control methods. (Dana Meyers)
Reorganized the ACPI table header files into two main
files: one for the ACPI tables consumed by the ACPICA core,
and another for the miscellaneous ACPI tables that are
consumed by the drivers and other software. The various
FADT definitions were merged into one common section and
three different tables (ACPI 1.0, 1.0+, and 2.0)
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Implemented the use of a cache object for all internal
namespace nodes. Since there are about 1000 static nodes
in a typical system, this will decrease memory use for
cache implementations that minimize per-allocation overhead
(such as a slab allocator.)
Removed the reference count mechanism for internal
namespace nodes, since it was deemed unnecessary. This
reduces the size of each namespace node by about 5%-10%
on all platforms. Nodes are now 20 bytes for the 32-bit
case, and 32 bytes for the 64-bit case.
Optimized several internal data structures to reduce
object size on 64-bit platforms by packing data within
the 64-bit alignment. This includes the frequently used
ACPI_OPERAND_OBJECT, of which there can be ~1000 static
instances corresponding to the namespace objects.
Added two new strings for the predefined _OSI method:
"Windows 2001.1 SP1" and "Windows 2006".
Split the allocation tracking mechanism out to a separate
file, from utalloc.c to uttrack.c. This mechanism appears
to be only useful for application-level code. Kernels may
wish to not include uttrack.c in distributions.
Removed all remnants of the obsolete ACPI_REPORT_* macros
and the associated code. (These macros have been replaced
by the ACPI_ERROR and ACPI_WARNING macros.)
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Tagged all external interfaces to the subsystem with the
new ACPI_EXPORT_SYMBOL macro. This macro can be defined
as necessary to assist kernel integration. For Linux,
the macro resolves to the EXPORT_SYMBOL macro. The default
definition is NULL.
Added the ACPI_THREAD_ID type for the return value from
acpi_os_get_thread_id(). This allows the host to define this
as necessary to simplify kernel integration. The default
definition is ACPI_NATIVE_UINT.
Valery Podrezov fixed two interpreter problems related
to error processing, the deletion of objects, and placing
invalid pointers onto the internal operator result stack.
http://bugzilla.kernel.org/show_bug.cgi?id=6028http://bugzilla.kernel.org/show_bug.cgi?id=6151
Increased the reference count threshold where a warning is
emitted for large reference counts in order to eliminate
unnecessary warnings on systems with large namespaces
(especially 64-bit.) Increased the value from 0x400
to 0x800.
Due to universal disagreement as to the meaning of the
'c' in the calloc() function, the ACPI_MEM_CALLOCATE
macro has been renamed to ACPI_ALLOCATE_ZEROED so that the
purpose of the interface is 'clear'. ACPI_MEM_ALLOCATE and
ACPI_MEM_FREE are renamed to ACPI_ALLOCATE and ACPI_FREE.
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Implemented a change to the IndexField support to match
the behavior of the Microsoft AML interpreter. The value
written to the Index register is now a byte offset,
no longer an index based upon the width of the Data
register. This should fix IndexField problems seen on
some machines where the Data register is not exactly one
byte wide. The ACPI specification will be clarified on
this point.
Fixed a problem where several resource descriptor
types could overrun the internal descriptor buffer due
to size miscalculation: VendorShort, VendorLong, and
Interrupt. This was noticed on IA64 machines, but could
affect all platforms.
Fixed a problem where individual resource descriptors were
misaligned within the internal buffer, causing alignment
faults on IA64 platforms.
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Implemented support in the Resource Manager to allow
unresolved namestring references within resource package
objects for the _PRT method. This support is in addition
to the previously implemented unresolved reference
support within the AML parser. If the interpreter slack
mode is enabled (true on Linux unless acpi=strict),
these unresolved references will be passed through
to the caller as a NULL package entry.
http://bugzilla.kernel.org/show_bug.cgi?id=5741
Implemented and deployed new macros and functions for
error and warning messages across the subsystem. These
macros are simpler and generate less code than their
predecessors. The new macros ACPI_ERROR, ACPI_EXCEPTION,
ACPI_WARNING, and ACPI_INFO replace the ACPI_REPORT_*
macros.
Implemented the acpi_cpu_flags type to simplify host OS
integration of the Acquire/Release Lock OSL interfaces.
Suggested by Steven Rostedt and Andrew Morton.
Fixed a problem where Alias ASL operators are sometimes
not correctly resolved. causing AE_AML_INTERNAL
http://bugzilla.kernel.org/show_bug.cgi?id=5189http://bugzilla.kernel.org/show_bug.cgi?id=5674
Fixed several problems with the implementation of the
ConcatenateResTemplate ASL operator. As per the ACPI
specification, zero length buffers are now treated as a
single EndTag. One-length buffers always cause a fatal
exception. Non-zero length buffers that do not end with
a full 2-byte EndTag cause a fatal exception.
Fixed a possible structure overwrite in the
AcpiGetObjectInfo external interface. (With assistance
from Thomas Renninger)
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Added 2006 copyright.
At SuSE's suggestion, enabled all error messages
without enabling function tracing, ie with CONFIG_ACPI_DEBUG=n
Replaced all instances of the ACPI_DEBUG_PRINT macro invoked at
the ACPI_DB_ERROR and ACPI_DB_WARN debug levels with
the ACPI_REPORT_ERROR and ACPI_REPORT_WARNING macros,
respectively. This preserves all error and warning messages
in the non-debug version of the ACPICA code (this has been
referred to as the "debug lite" option.) Over 200 cases
were converted to create a total of over 380 error/warning
messages across the ACPICA code. This increases the code
and data size of the default non-debug version by about 13K.
Added ACPI_NO_ERROR_MESSAGES flag to enable deleting all messages.
The size of the debug version remains about the same.
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Implemented optional support to allow unresolved names
within ASL Package objects. A null object is inserted in
the package when a named reference cannot be located in
the current namespace. Enabled via the interpreter slack
flag which Linux has enabled by default (acpi=strict
to disable slack). This should eliminate AE_NOT_FOUND
exceptions seen on machines that contain such code.
Implemented an optimization to the initialization
sequence that can improve boot time. During ACPI device
initialization, the _STA method is now run if and only
if the _INI method exists. The _STA method is used to
determine if the device is present; An _INI can only be
run if _STA returns present, but it is a waste of time to
run the _STA method if the _INI does not exist. (Prototype
and assistance from Dong Wei)
Implemented use of the C99 uintptr_t for the pointer
casting macros if it is available in the current
compiler. Otherwise, the default (void *) cast is used
as before.
Fixed some possible memory leaks found within the
execution path of the Break, Continue, If, and CreateField
operators. (Valery Podrezov)
Fixed a problem introduced in the 20051202 release where
an exception is generated during method execution if a
control method attempts to declare another method.
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Modified the parsing of control methods to no longer
create namespace objects during the first pass of the
parse. Objects are now created only during the execute
phase, at the moment the namespace creation operator
is encountered in the AML (Name, OperationRegion,
CreateByteField, etc.) This should eliminate ALREADY_EXISTS
exceptions seen on some machines where reentrant control
methods are protected by an AML mutex. The mutex will now
correctly block multiple threads from attempting to create
the same object more than once.
Increased the number of available Owner Ids for namespace
object tracking from 32 to 255. This should eliminate the
OWNER_ID_LIMIT exceptions seen on some machines with a
large number of ACPI tables (either static or dynamic).
Enhanced the namespace dump routine to output the owner
ID for each namespace object.
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Fixed a problem in the AML parser where the method thread
count could be decremented below zero if any errors
occurred during the method parse phase. This should
eliminate AE_AML_METHOD_LIMIT exceptions seen on some
machines. This also fixed a related regression with the
mechanism that detects and corrects methods that cannot
properly handle reentrancy (related to the deployment of
the new OwnerId mechanism.)
Eliminated the pre-parsing of control methods (to detect
errors) during table load. Related to the problem above,
this was causing unwind issues if any errors occurred
during the parse, and it seemed to be overkill. A table
load should not be aborted if there are problems with
any single control method, thus rendering this feature
rather pointless.
Fixed a problem with the new table-driven resource manager
where an internal buffer overflow could occur for small
resource templates.
Implemented a new external interface, acpi_get_vendor_resource()
This interface will find and return a vendor-defined
resource descriptor within a _CRS or _PRS
method via an ACPI 3.0 UUID match. (from Bjorn Helgaas)
Removed the length limit (200) on string objects as
per the upcoming ACPI 3.0A specification. This affects
the following areas of the interpreter: 1) any implicit
conversion of a Buffer to a String, 2) a String object
result of the ASL Concatentate operator, 3) the String
object result of the ASL ToString operator.
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Implemented support for the EM64T and other x86_64
processors. This essentially entails recognizing
that these processors support non-aligned memory
transfers. Previously, all 64-bit processors were assumed
to lack hardware support for non-aligned transfers.
Completed conversion of the Resource Manager to nearly
full table-driven operation. Specifically, the resource
conversion code (convert AML to internal format and the
reverse) and the debug code to dump internal resource
descriptors are fully table-driven, reducing code and data
size and improving maintainability.
The OSL interfaces for Acquire and Release Lock now use a
64-bit flag word on 64-bit processors instead of a fixed
32-bit word. (Alexey Starikovskiy)
Implemented support within the resource conversion code
for the Type-Specific byte within the various ACPI 3.0
*WordSpace macros.
Fixed some issues within the resource conversion code for
the type-specific flags for both Memory and I/O address
resource descriptors. For Memory, implemented support
for the MTP and TTP flags. For I/O, split the TRS and TTP
flags into two separate fields.
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Completed a major overhaul of the Resource Manager code -
specifically, optimizations in the area of the AML/internal
resource conversion code. The code has been optimized to
simplify and eliminate duplicated code, CPU stack use has
been decreased by optimizing function parameters and local
variables, and naming conventions across the manager have
been standardized for clarity and ease of maintenance (this
includes function, parameter, variable, and struct/typedef
names.)
All Resource Manager dispatch and information tables have
been moved to a single location for clarity and ease of
maintenance. One new file was created, named "rsinfo.c".
The ACPI return macros (return_ACPI_STATUS, etc.) have
been modified to guarantee that the argument is
not evaluated twice, making them less prone to macro
side-effects. However, since there exists the possibility
of additional stack use if a particular compiler cannot
optimize them (such as in the debug generation case),
the original macros are optionally available. Note that
some invocations of the return_VALUE macro may now cause
size mismatch warnings; the return_UINT8 and return_UINT32
macros are provided to eliminate these. (From Randy Dunlap)
Implemented a new mechanism to enable debug tracing for
individual control methods. A new external interface,
acpi_debug_trace(), is provided to enable this mechanism. The
intent is to allow the host OS to easily enable and disable
tracing for problematic control methods. This interface
can be easily exposed to a user or debugger interface if
desired. See the file psxface.c for details.
acpi_ut_callocate() will now return a valid pointer if a
length of zero is specified - a length of one is used
and a warning is issued. This matches the behavior of
acpi_ut_allocate().
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Implemented support to ignore an attempt to install/load
a particular ACPI table more than once. Apparently there
exists BIOS code that repeatedly attempts to load the same
SSDT upon certain events. Thanks to Venkatesh Pallipadi.
Restructured the main interface to the AML parser in
order to correctly handle all exceptional conditions. This
will prevent leakage of the OwnerId resource and should
eliminate the AE_OWNER_ID_LIMIT exceptions seen on some
machines. Thanks to Alexey Starikovskiy.
Support for "module level code" has been disabled in this
version due to a number of issues that have appeared
on various machines. The support can be enabled by
defining ACPI_ENABLE_MODULE_LEVEL_CODE during subsystem
compilation. When the issues are fully resolved, the code
will be enabled by default again.
Modified the internal functions for debug print support
to define the FunctionName parameter as a (const char *)
for compatibility with compiler built-in macros such as
__FUNCTION__, etc.
Linted the entire ACPICA source tree for both 32-bit
and 64-bit.
Signed-off-by: Robert Moore <robert.moore@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
The use of the CPU stack in the debug version of the
subsystem has been considerably reduced. Previously, a
debug structure was declared in every function that used
the debug macros. This structure has been removed in
favor of declaring the individual elements as parameters
to the debug functions. This reduces the cumulative stack
use during nested execution of ACPI function calls at the
cost of a small increase in the code size of the debug
version of the subsystem. With assistance from Alexey
Starikovskiy and Len Brown.
Added the ACPI_GET_FUNCTION_NAME macro to enable the
compiler-dependent headers to define a macro that will
return the current function name at runtime (such as
__FUNCTION__ or _func_, etc.) The function name is used
by the debug trace output. If ACPI_GET_FUNCTION_NAME
is not defined in the compiler-dependent header, the
function name is saved on the CPU stack (one pointer per
function.) This mechanism is used because apparently there
exists no standard ANSI-C defined macro that that returns
the function name.
Alexey Starikovskiy redesigned and reimplemented the
"Owner ID" mechanism used to track namespace objects
created/deleted by ACPI tables and control method
execution. A bitmap is now used to allocate and free the
IDs, thus solving the wraparound problem present in the
previous implementation. The size of the namespace node
descriptor was reduced by 2 bytes as a result.
Removed the UINT32_BIT and UINT16_BIT types that were used
for the bitfield flag definitions within the headers for
the predefined ACPI tables. These have been replaced by
UINT8_BIT in order to increase the code portability of
the subsystem. If the use of UINT8 remains a problem,
we may be forced to eliminate bitfields entirely because
of a lack of portability.
Alexey Starikovksiy enhanced the performance of
acpi_ut_update_object_reference. This is a frequently used
function and this improvement increases the performance
of the entire subsystem.
Alexey Starikovskiy fixed several possible memory leaks
and the inverse - premature object deletion.
Signed-off-by: Len Brown <len.brown@intel.com>
Fixed three cases in the interpreter where an "index"
argument to an ASL function was still (internally) 32
bits instead of the required 64 bits. This was the Index
argument to the Index, Mid, and Match operators.
The "strupr" function is now permanently local
(acpi_ut_strupr), since this is not a POSIX-defined
function and not present in most kernel-level C
libraries. References to the C library strupr function
have been removed from the headers.
Completed the deployment of static
functions/prototypes. All prototypes with the static
attribute have been moved from the headers to the owning
C file.
ACPICA 20050329 from Bob Moore
An error is now generated if an attempt is made to create
a Buffer Field of length zero (A CreateField with a length
operand of zero.)
The interpreter now issues a warning whenever executable
code at the module level is detected during ACPI table
load. This will give some idea of the prevalence of this
type of code.
Implemented support for references to named objects (other
than control methods) within package objects.
Enhanced package object output for the debug
object. Package objects are now completely dumped, showing
all elements.
Enhanced miscellaneous object output for the debug
object. Any object can now be written to the debug object
(for example, a device object can be written, and the type
of the object will be displayed.)
The "static" qualifier has been added to all local
functions across the core subsystem.
The number of "long" lines (> 80 chars) within the source
has been significantly reduced, by about 1/3.
Cleaned up all header files to ensure that all CA/iASL
functions are prototyped (even static functions) and the
formatting is consistent.
Two new header files have been added, acopcode.h and
acnames.h.
Removed several obsolete functions that were no longer
used.
Signed-off-by: Len Brown <len.brown@intel.com>
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.
Let it rip!
Len Brown
Bob Moore
Linus Torvalds