Commit Graph

16 Commits

Author SHA1 Message Date
Rumen G. Bogdanovski efac52762b [IPVS]: Synchronize closing of Connections
This patch makes the master daemon to sync the connection when it is about
to close.  This makes the connections on the backup to close or timeout
according their state.  Before the sync was performed only if the
connection is in ESTABLISHED state which always made the connections to
timeout in the hard coded 3 minutes. However the Andy Gospodarek's patch
([IPVS]: use proper timeout instead of fixed value) effectively did nothing
more than increasing this to 15 minutes (Established state timeout).  So
this patch makes use of proper timeout since it syncs the connections on
status changes to FIN_WAIT (2min timeout) and CLOSE (10sec timeout).
However if the backup misses CLOSE hopefully it did not miss FIN_WAIT.
Otherwise we will just have to wait for the ESTABLISHED state timeout. As
it is without this patch.  This way the number of the hanging connections
on the backup is kept to minimum. And very few of them will be left to
timeout with a long timeout.

This is important if we want to make use of the fix for the real server
overcommit on master/backup fail-over.

Signed-off-by: Rumen G. Bogdanovski <rumen@voicecho.com>
Signed-off-by: Simon Horman <horms@verge.net.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-11-07 04:15:10 -08:00
Rumen G. Bogdanovski 1e356f9cdf [IPVS]: Bind connections on stanby if the destination exists
This patch fixes the problem with node overload on director fail-over.
Given the scenario: 2 nodes each accepting 3 connections at a time and 2
directors, director failover occurs when the nodes are fully loaded (6
connections to the cluster) in this case the new director will assign
another 6 connections to the cluster, If the same real servers exist
there.

The problem turned to be in not binding the inherited connections to
the real servers (destinations) on the backup director. Therefore:
"ipvsadm -l" reports 0 connections:
root@test2:~# ipvsadm -l
IP Virtual Server version 1.2.1 (size=4096)
Prot LocalAddress:Port Scheduler Flags
  -> RemoteAddress:Port           Forward Weight ActiveConn InActConn
TCP  test2.local:5999 wlc
  -> node473.local:5999           Route   1000   0          0
  -> node484.local:5999           Route   1000   0          0

while "ipvs -lnc" is right
root@test2:~# ipvsadm -lnc
IPVS connection entries
pro expire state       source             virtual            destination
TCP 14:56  ESTABLISHED 192.168.0.10:39164 192.168.0.222:5999
192.168.0.51:5999
TCP 14:59  ESTABLISHED 192.168.0.10:39165 192.168.0.222:5999
192.168.0.52:5999

So the patch I am sending fixes the problem by binding the received
connections to the appropriate service on the backup director, if it
exists, else the connection will be handled the old way. So if the
master and the backup directors are synchronized in terms of real
services there will be no problem with server over-committing since
new connections will not be created on the nonexistent real services
on the backup. However if the service is created later on the backup,
the binding will be performed when the next connection update is
received. With this patch the inherited connections will show as
inactive on the backup:

root@test2:~# ipvsadm -l
IP Virtual Server version 1.2.1 (size=4096)
Prot LocalAddress:Port Scheduler Flags
  -> RemoteAddress:Port           Forward Weight ActiveConn InActConn
TCP  test2.local:5999 wlc
  -> node473.local:5999           Route   1000   0          1
  -> node484.local:5999           Route   1000   0          1

rumen@test2:~$ cat /proc/net/ip_vs
IP Virtual Server version 1.2.1 (size=4096)
Prot LocalAddress:Port Scheduler Flags
  -> RemoteAddress:Port Forward Weight ActiveConn InActConn
TCP  C0A800DE:176F wlc
  -> C0A80033:176F      Route   1000   0          1
  -> C0A80032:176F      Route   1000   0          1

Regards,
Rumen Bogdanovski

Acked-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: Rumen G. Bogdanovski <rumen@voicecho.com>
Signed-off-by: Simon Horman <horms@verge.net.au>
2007-11-07 04:15:09 -08:00
Andy Gospodarek 5c81833c2f [IPVS]: use proper timeout instead of fixed value
Instead of using the default timeout of 3 minutes, this uses the timeout
specific to the protocol used for the connection. The 3 minute timeout
seems somewhat arbitrary (though I know it is used other places in the
ipvs code) and when failing over it would be much nicer to use one of
the configured timeout values.

Signed-off-by: Andy Gospodarek <andy@greyhouse.net>
Acked-by: Simon Horman <horms@verge.net.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-29 22:37:23 -07:00
Pavel Emelyanov 6651fd561b Use task_pid_nr() in ip_vs_sync.c
The sync_master_pid and sync_backup_pid are set in set_sync_pid() and are
used later for set/not-set checks and in printk.  So it is safe to use the
global pid value in this case.

Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Acked-by: Sukadev Bhattiprolu <sukadev@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-19 11:53:43 -07:00
Pavel Emelyanov ba25f9dcc4 Use helpers to obtain task pid in printks
The task_struct->pid member is going to be deprecated, so start
using the helpers (task_pid_nr/task_pid_vnr/task_pid_nr_ns) in
the kernel.

The first thing to start with is the pid, printed to dmesg - in
this case we may safely use task_pid_nr(). Besides, printks produce
more (much more) than a half of all the explicit pid usage.

[akpm@linux-foundation.org: git-drm went and changed lots of stuff]
Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Cc: Dave Airlie <airlied@linux.ie>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-19 11:53:43 -07:00
Eric W. Biederman 881d966b48 [NET]: Make the device list and device lookups per namespace.
This patch makes most of the generic device layer network
namespace safe.  This patch makes dev_base_head a
network namespace variable, and then it picks up
a few associated variables.  The functions:
dev_getbyhwaddr
dev_getfirsthwbytype
dev_get_by_flags
dev_get_by_name
__dev_get_by_name
dev_get_by_index
__dev_get_by_index
dev_ioctl
dev_ethtool
dev_load
wireless_process_ioctl

were modified to take a network namespace argument, and
deal with it.

vlan_ioctl_set and brioctl_set were modified so their
hooks will receive a network namespace argument.

So basically anthing in the core of the network stack that was
affected to by the change of dev_base was modified to handle
multiple network namespaces.  The rest of the network stack was
simply modified to explicitly use &init_net the initial network
namespace.  This can be fixed when those components of the network
stack are modified to handle multiple network namespaces.

For now the ifindex generator is left global.

Fundametally ifindex numbers are per namespace, or else
we will have corner case problems with migration when
we get that far.

At the same time there are assumptions in the network stack
that the ifindex of a network device won't change.  Making
the ifindex number global seems a good compromise until
the network stack can cope with ifindex changes when
you change namespaces, and the like.

Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-10 16:49:10 -07:00
Neil Horman cc0191aeef [IPVS]: Fix state variable on failure to start ipvs threads
ip_vs currently fails to reset its ip_vs_sync_state variable if the
sync thread fails to start properly.  The result is that the kernel
will report a running daemon when their actuall is none.

If you issue the following commands:

1. ipvsadm --start-daemon master --mcast-interface bla
2. ipvsadm -L --daemon
3. ipvsadm --stop-daemon master

Assuming that bla is not an actual interface, step 2 should return no
data, but instead returns:

$ ipvsadm -L --daemon
master sync daemon (mcast=bla, syncid=0)

Signed-off-by: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-06-18 22:33:20 -07:00
Simon Horman 37004af3aa [IPVS]: Make ip_vs_sync.c <= 80col wide.
Signed-off-by: Simon Horman <horms@verge.net.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-12-11 14:35:03 -08:00
Simon Horman 89eaeb09ba [IPVS]: Use msleep_interruptable() instead of ssleep() aka msleep()
Dean Manners notices that when an IPVS synchonisation daemons are
started the system load slowly climbs up to 1. This seems to be related
to the call to ssleep(1) (aka msleep(1000) in the main loop. Replacing
this with a call to msleep_interruptable() seems to make the problem go
away. Though I'm not sure that it is correct.

This is the second edition of this patch, which replaces ssleep()
in the main loop for both the master and backup threads, as well
as some thread synchronisation code. The latter is just for thorougness
as it shouldn't be causing any problems.

Signed-Off-By: Simon Horman <horms@verge.net.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-12-11 14:35:02 -08:00
Peter Zijlstra 6e9a4738c9 [PATCH] completions: lockdep annotate on stack completions
All on stack DECLARE_COMPLETIONs should be replaced by:
DECLARE_COMPLETION_ONSTACK

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Acked-by: Ingo Molnar <mingo@elte.hu>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-01 00:39:24 -07:00
Al Viro 014d730d56 [IPVS]: ipvs annotations
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-09-28 18:03:04 -07:00
Al Viro a61ced5d1c [IPV4]: inet_select_addr() annotations
argument and return value are net-endian.  Annotated function and inferred
net-endian variables in callers.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-09-28 17:54:08 -07:00
Arnaldo Carvalho de Melo 14c850212e [INET_SOCK]: Move struct inet_sock & helper functions to net/inet_sock.h
To help in reducing the number of include dependencies, several files were
touched as they were getting needed headers indirectly for stuff they use.

Thanks also to Alan Menegotto for pointing out that net/dccp/proto.c had
linux/dccp.h include twice.

Signed-off-by: Arnaldo Carvalho de Melo <acme@mandriva.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-01-03 13:11:21 -08:00
Julian Anastasov 87375ab47c [IPVS]: ip_vs_ftp breaks connections using persistence
ip_vs_ftp when loaded can create NAT connections with unknown client
port for passive FTP. For such expectations we lookup with cport=0 on
incoming packet but it matches the format of the persistence templates
causing packets to other persistent virtual servers to be forwarded to
real server without creating connection. Later the reply packets are
treated as foreign and not SNAT-ed.

This patch changes the connection lookup for packets from clients:

* introduce IP_VS_CONN_F_TEMPLATE connection flag to mark the
  connection as template

* create new connection lookup function just for templates -
  ip_vs_ct_in_get

* make sure ip_vs_conn_in_get hits only connections with
  IP_VS_CONN_F_NO_CPORT flag set when s_port is 0. By this way
  we avoid returning template when looking for cport=0 (ftp)

Signed-off-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: David S. Miller <davem@davemloft.net>
2005-09-14 21:08:51 -07:00
pageexec 4da62fc70d [IPVS]: Fix for overflows
From: <pageexec@freemail.hu>

$subject was fixed in 2.4 already, 2.6 needs it as well.

The impact of the bugs is a kernel stack overflow and privilege escalation
from CAP_NET_ADMIN via the IP_VS_SO_SET_STARTDAEMON/IP_VS_SO_GET_DAEMON
ioctls.  People running with 'root=all caps' (i.e., most users) are not
really affected (there's nothing to escalate), but SELinux and similar
users should take it seriously if they grant CAP_NET_ADMIN to other users.

Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2005-06-26 16:00:19 -07:00
Linus Torvalds 1da177e4c3 Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!
2005-04-16 15:20:36 -07:00