Commit Graph

72707 Commits

Author SHA1 Message Date
Joe Perches a8972ccf00 sched: constify sched.h
Add const to some struct task_struct * uses

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2007-10-24 18:23:50 +02:00
Mel Gorman b3da2a73ff sched: document profile=sleep requiring CONFIG_SCHEDSTATS
profile=sleep only works if CONFIG_SCHEDSTATS is set. This patch notes
the limitation in Documentation/kernel-parameters.txt and prints a
warning at boot-time if profile=sleep is used without CONFIG_SCHEDSTAT.

Signed-off-by: Mel Gorman <mel@csn.ul.ie>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2007-10-24 18:23:50 +02:00
Satyam Sharma 838225b48e sched: use show_regs() to improve __schedule_bug() output
A full register dump along with stack backtrace would make the
"scheduling while atomic" message more helpful. Use show_regs() instead
of dump_stack() for this. We already know we're atomic in here (that is
why this function was called) so show_regs()'s atomicity expectations
are guaranteed.

Also, modify the output of the "BUG: scheduling while atomic:" header a
bit to keep task->comm and task->pid together and preempt_count() after
them.

Signed-off-by: Satyam Sharma <satyam@infradead.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2007-10-24 18:23:50 +02:00
Ingo Molnar 4dcf6aff02 sched: clean up sched_domain_debug()
clean up sched_domain_debug().

this also shrinks the code a bit:

   text    data     bss     dec     hex filename
  50474    4306     480   55260    d7dc sched.o.before
  50404    4306     480   55190    d796 sched.o.after

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2007-10-24 18:23:48 +02:00
Ingo Molnar b15136e949 sched: fix fastcall mismatch in completion APIs
Jeff Dike noticed that wait_for_completion_interruptible()'s prototype
had a mismatched fastcall.

Fix this by removing the fastcall attributes from all the completion APIs.

Found-by: Jeff Dike <jdike@linux.intel.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2007-10-24 18:23:48 +02:00
Milton Miller 7378547f2c sched: fix sched_domain sysctl registration again
commit  029190c515 (cpuset
sched_load_balance flag) was not tested SCHED_DEBUG enabled as
committed as it dereferences NULL when used and it reordered
the sysctl registration to cause it to never show any domains
or their tunables.

Fixes:

1) restore arch_init_sched_domains ordering
	we can't walk the domains before we build them

	presently we register cpus with empty directories (no domain
	directories or files).

2) make unregister_sched_domain_sysctl do nothing when already unregistered
	detach_destroy_domains is now called one set of cpus at a time
	unregister_syctl dereferences NULL if called with a null.

	While the the function would always dereference null if called
	twice, in the previous code it was always called once and then
	was followed a register.  So only the hidden bug of the
	sysctl_root_table not being allocated followed by an attempt to
	free it would have shown the error.

3) always call unregister and register in partition_sched_domains
	The code is "smart" about unregistering only needed domains.
	Since we aren't guaranteed any calls to unregister, always 
	unregister.   Without calling register on the way out we
	will not have a table or any sysctl tree.

4) warn if register is called without unregistering
	The previous table memory is lost, leaving pointers to the
	later freed memory in sysctl and leaking the memory of the
	tables.

Before this patch on a 2-core 4-thread box compiled for SMT and NUMA,
the domains appear empty (there are actually 3 levels per cpu).  And as
soon as two domains a null pointer is dereferenced (unreliable in this
case is stack garbage):

bu19a:~# ls -R /proc/sys/kernel/sched_domain/
/proc/sys/kernel/sched_domain/:
cpu0  cpu1  cpu2  cpu3

/proc/sys/kernel/sched_domain/cpu0:

/proc/sys/kernel/sched_domain/cpu1:

/proc/sys/kernel/sched_domain/cpu2:

/proc/sys/kernel/sched_domain/cpu3:

bu19a:~# mkdir /dev/cpuset
bu19a:~# mount -tcpuset cpuset /dev/cpuset/
bu19a:~# cd /dev/cpuset/
bu19a:/dev/cpuset# echo 0 > sched_load_balance 
bu19a:/dev/cpuset# mkdir one
bu19a:/dev/cpuset# echo 1 > one/cpus               
bu19a:/dev/cpuset# echo 0 > one/sched_load_balance 
Unable to handle kernel paging request for data at address 0x00000018
Faulting instruction address: 0xc00000000006b608
NIP: c00000000006b608 LR: c00000000006b604 CTR: 0000000000000000
REGS: c000000018d973f0 TRAP: 0300   Not tainted  (2.6.23-bml)
MSR: 9000000000009032 <EE,ME,IR,DR>  CR: 28242442  XER: 00000000
DAR: 0000000000000018, DSISR: 0000000040000000
TASK = c00000001912e340[1987] 'bash' THREAD: c000000018d94000 CPU: 2
..
NIP [c00000000006b608] .unregister_sysctl_table+0x38/0x110
LR [c00000000006b604] .unregister_sysctl_table+0x34/0x110
Call Trace:
[c000000018d97670] [c000000007017270] 0xc000000007017270 (unreliable)
[c000000018d97720] [c000000000058710] .detach_destroy_domains+0x30/0xb0
[c000000018d977b0] [c00000000005cf1c] .partition_sched_domains+0x1bc/0x230
[c000000018d97870] [c00000000009fdc4] .rebuild_sched_domains+0xb4/0x4c0
[c000000018d97970] [c0000000000a02e8] .update_flag+0x118/0x170
[c000000018d97a80] [c0000000000a1768] .cpuset_common_file_write+0x568/0x820
[c000000018d97c00] [c00000000009d95c] .cgroup_file_write+0x7c/0x180
[c000000018d97cf0] [c0000000000e76b8] .vfs_write+0xe8/0x1b0
[c000000018d97d90] [c0000000000e810c] .sys_write+0x4c/0x90
[c000000018d97e30] [c00000000000852c] syscall_exit+0x0/0x40

Signed-off-by: Milton Miller <miltonm@bga.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2007-10-24 18:23:48 +02:00
Gerrit Renker 24c667db59 [CCID2/3]: Initialisation assignments of 0 are redundant
Assigning initial values of `0' is redundant when loading a new CCID structure,
since in net/dccp/ccid.c the entire CCID structure is zeroed out prior to
initialisation in ccid_new():

    	struct ccid {
    		struct ccid_operations *ccid_ops;
    		char		       ccid_priv[0];
    	};

    	// ...
    	if (rx) {
    		memset(ccid + 1, 0, ccid_ops->ccid_hc_rx_obj_size);
    		if (ccid->ccid_ops->ccid_hc_rx_init != NULL &&
    		    ccid->ccid_ops->ccid_hc_rx_init(ccid, sk) != 0)
    			goto out_free_ccid;
    	} else {
    		memset(ccid + 1, 0, ccid_ops->ccid_hc_tx_obj_size);
    		/* analogous to the rx case */
    	}

This patch therefore removes the redundant assignments. Thanks to Arnaldo for
the inspiration.

Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
Signed-off-by: Ian McDonald <ian.mcdonald@jandi.co.nz>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2007-10-24 10:53:01 -02:00
Gerrit Renker 76fd1e87d9 [DCCP]: Unaligned pointer access
This fixes `unaligned (read) access' errors of the type

Kernel unaligned access at TPC[100f970c] dccp_parse_options+0x4f4/0x7e0 [dccp]
Kernel unaligned access at TPC[1011f2e4] ccid3_hc_tx_parse_options+0x1ac/0x380 [dccp_ccid3]
Kernel unaligned access at TPC[100f9898] dccp_parse_options+0x680/0x880 [dccp]

by using the get_unaligned macro for parsing options.

Commiter note: Preserved the sparse __be{16,32} annotations.

Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
Signed-off-by: Ian McDonald <ian.mcdonald@jandi.co.nz>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2007-10-24 10:46:58 -02:00
Gerrit Renker d8ef2c29a0 [DCCP]: Convert Reset code into socket error number
This adds support for converting the 11 currently defined Reset codes into system
error numbers, which are stored in sk_err for further interpretation.

This makes the externally visible API behaviour similar to TCP, since a client
connecting to a non-existing port will experience ECONNREFUSED.

* Code 0, Unspecified, is interpreted as non-error (0);
* Code 1, Closed (normal termination), also maps into 0;
* Code 2, Aborted, maps into "Connection reset by peer" (ECONNRESET);
* Code 3, No Connection and
  Code 7, Connection Refused, map into "Connection refused" (ECONNREFUSED);
* Code 4, Packet Error, maps into "No message of desired type" (ENOMSG);
* Code 5, Option Error, maps into "Illegal byte sequence" (EILSEQ);
* Code 6, Mandatory Error, maps into "Operation not supported on transport endpoint" (EOPNOTSUPP);
* Code 8, Bad Service Code, maps into "Invalid request code" (EBADRQC);
* Code 9, Too Busy, maps into "Too many users" (EUSERS);
* Code 10, Bad Init Cookie, maps into "Invalid request descriptor" (EBADR);
* Code 11, Aggression Penalty, maps into "Quota exceeded" (EDQUOT)
  which makes sense in terms of using more than the `fair share' of bandwidth.

Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
Acked-by: Ian McDonald <ian.mcdonald@jandi.co.nz>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2007-10-24 10:27:48 -02:00
Gerrit Renker 1238d0873b [DCCP]: One more exemption from full sequence number checks
This fixes the following problem: client connects to peer which has no DCCP
enabled or loaded; ICMP error messages ("Protocol Unavailable") can be seen
on the wire, but the application hangs. Reason: ICMP packets don't get through
to dccp_v4_err.

When reporting errors, a sequence number check is made for the DCCP packet
that had caused an ICMP error to arrive.
Such checks can not be made if the socket is in state LISTEN, RESPOND (which
in the implementation is the same as LISTEN), or REQUEST, since update_gsr()
has not been called in these states, hence the sequence window is 0..0.

This patch fixes the problem by adding the REQUEST state as another exemption
to the window check. The error reporting now works as expected on connecting.

Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
Acked-by: Ian McDonald <ian.mcdonald@jandi.co.nz>
Signed-off-by: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
2007-10-24 10:18:06 -02:00
Gerrit Renker fde20105f3 [DCCP]: Retrieve packet sequence number for error reporting
This fixes a problem when analysing erroneous packets in dccp_v{4,6}_err:
* dccp_hdr_seq currently takes an skb
* however, the transport headers in the skb are shifted, due to the
  preceding IPv4/v6 header.
Fixed for v4 and v6 by changing dccp_hdr_seq to take a struct dccp_hdr as
argument. Verified that the correct sequence number is now reported in the
error handler.

Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
Acked-by: Ian McDonald <ian.mcdonald@jandi.co.nz>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2007-10-24 10:12:09 -02:00
Adrian Bunk 82861924a5 blackfin: fix sg fallout
Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Jens Axboe <axboe@carl.home.kernel.dk>
2007-10-24 14:09:25 +02:00
Jens Axboe 8c7837c4f5 xtensa: dma-mapping.h is using linux/scatterlist.h functions, so include it
It's currently using asm/scatterlist.h, but that is not enough.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-10-24 13:28:40 +02:00
Jens Axboe 5d9dc2cfd8 Merge branch 'for-linus' of ssh://master.kernel.org/pub/scm/linux/kernel/git/hskinnemoen/avr32-2.6 into sg 2007-10-24 13:25:26 +02:00
Jens Axboe 3d1266c704 SG: audit of drivers that use blk_rq_map_sg()
They need to properly init the sg table, or blk_rq_map_sg() will
complain if CONFIG_DEBUG_SG is set.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-10-24 13:21:21 +02:00
WANG Cong 23464ffa47 arch/um/drivers/ubd_kern.c: fix a building error
Fix this uml building error:
arch/um/drivers/ubd_kern.c: In function 'do_ubd_request':
arch/um/drivers/ubd_kern.c:1118: error: implicit declaration of function
'sg_page'
arch/um/drivers/ubd_kern.c:1118: warning: passing argument 6 of
'prepare_request' makes pointer from integer without a cast
make[1]: *** [arch/um/drivers/ubd_kern.o] Error 1
make: *** [arch/um/drivers] Error 2

Signed-off-by: WANG Cong <xiyou.wangcong@gmail.com>

Add sg_init_table() call as well.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-10-24 13:07:11 +02:00
Alexey Dobriyan eec407c9ac x86: fix bogus KERN_ALERT on oops
fix this:

printing eip: f881b9f3 *pdpt = 0000000000003001 <1>*pde = 000000000480a067 *pte = 0000000000000000
						^^^

[ mingo: added KERN_CONT as suggested by Pekka Enberg ]

Signed-off-by: Alexey Dobriyan <adobriyan@sw.ru>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2007-10-24 12:58:02 +02:00
Jeff Garzik 230e55adf6 x86: lguest build fix
Fix this error (i386 !SMP build):

arch/x86/lguest/boot.c: In function lguest_init:
arch/x86/lguest/boot.c:1059: error: pm_power_off undeclared (first use in this function)

by including linux/pm.h.

Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2007-10-24 12:58:02 +02:00
Mike Galbraith 1fb473d8f4 x86: fix CONFIG_KEXEC build breakage
X86_32 build fix to commit 62a31a03b3

Signed-off-by: Mike Galbraith <efault@gmx.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2007-10-24 12:58:01 +02:00
Jens Axboe 642f149031 SG: Change sg_set_page() to take length and offset argument
Most drivers need to set length and offset as well, so may as well fold
those three lines into one.

Add sg_assign_page() for those two locations that only needed to set
the page, where the offset/length is set outside of the function context.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-10-24 11:20:47 +02:00
Jeff Garzik 9317d4313e ISDN/sc: fix longstanding warning
drivers/isdn/sc/shmem.c: In function 'memcpy_toshmem':
drivers/isdn/sc/shmem.c:54: warning: passing argument 1 of 'memcpy_toio' makes pointer from integer without a cast

Also, remove some unneeded braces, and add some useful whitespace.

Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2007-10-24 05:16:25 -04:00
Haavard Skinnemoen 18ccc41943 AVR32: Fix sg_page breakage
The latest sg changes introduce the following build errors on AVR32:

include/asm/dma-mapping.h: In function ‘dma_map_sg’:
include/asm/dma-mapping.h:220: error: implicit declaration of function ‘sg_page’
include/asm/dma-mapping.h:220: error: invalid operands to binary -
include/asm/dma-mapping.h:221: error: implicit declaration of function ‘sg_virt’
include/asm/dma-mapping.h:221: warning: assignment makes pointer from integer without a cast
include/asm/dma-mapping.h: In function ‘dma_sync_sg_for_device’:
include/asm/dma-mapping.h:330: warning: passing argument 2 of ‘dma_cache_sync’ makes pointer from integer without a cast

Fix it by including the correct header file, i.e. linux/scatterlist.h
instead of asm/scatterlist.h.

Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
2007-10-24 10:16:02 +02:00
Jens Axboe bd6dee6f30 mmc: sg fallout
Do a full scan of the directory to try and be a bit more proactive,
instead of waiting for things to break.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-10-24 09:01:09 +02:00
Geert Uytterhoeven 5a1cb47ff4 m68k: sg fallout
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Jens Axboe <axboe@carl.home.kernel.dk>
2007-10-24 08:55:40 +02:00
David Miller d91c5e8839 More SG build fixes
Signed-off-by: Jens Axboe <axboe@carl.home.kernel.dk>
2007-10-24 08:46:01 +02:00
Heiko Carstens de58d94292 sg: add missing sg_init_table calls to zfcp
kernel BUG at include/linux/scatterlist.h:50!
illegal operation: 0001 [#1]
[...]
Call Trace:
([<000000000026f184>] zfcp_ns_gid_pn_request+0x4c/0x2a0)
 [<0000000000276dd4>] zfcp_erp_strategy_do_action+0x1410/0x1938
 [<0000000000278412>] zfcp_erp_thread+0x4fa/0x1430
 [<000000000001990a>] kernel_thread_starter+0x6/0xc
 [<0000000000019904>] kernel_thread_starter+0x0/0xc

Cc: Swen Schillig <swen@vnet.ibm.com>
Cc: Christof Schmitt <christof.schmitt@de.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Jens Axboe <axboe@carl.home.kernel.dk>
2007-10-24 08:45:35 +02:00
David Miller 5e2a06489e SG build fix
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Jens Axboe <axboe@carl.home.kernel.dk>
2007-10-24 08:44:21 +02:00
Chris Wright d58aa8c7b1 [SPARC64]: pass correct addr in get_fb_unmapped_area(MAP_FIXED)
Looks like the MAP_FIXED case is using the wrong address hint.  I'd
expect the comment "don't mess with it" means pass the request
straight on through, not change the address requested to -ENOMEM.

Signed-off-by: Chris Wright <chrisw@sous-sol.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-23 22:42:07 -07:00
Pavel Emelyanov 03cf786c4e [IPV4]: Explicitly call fib_get_table() in fib_frontend.c
In case the "multiple tables" config option is y, the ip_fib_local_table
is not a variable, but a macro, that calls fib_get_table(RT_TABLE_LOCAL).

Some code uses this "variable" *3* times in one place, thus implicitly
making 3 calls. Fix it.

Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-23 21:27:58 -07:00
Pavel Emelyanov f0fe91ded3 [NET]: Use BUILD_BUG_ON in net/core/flowi.c
Instead of ugly extern not-existing function.

Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-23 21:27:57 -07:00
Pavel Emelyanov 342709efc7 [NET]: Remove in-code externs for some functions from net/core/dev.c
Inconsistent prototype and real type for functions may have worse
consequences, than those for variables, so move them into a header.

Since they are used privately in net/core, make this file reside in
the same place.

Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-23 21:27:56 -07:00
Pavel Emelyanov a37ae4086e [NET]: Don't declare extern variables in net/core/sysctl_net_core.c
Some are already declared in include/linux/netdevice.h, while
some others (xfrm ones) need to be declared.

The driver/net/rrunner.c just uses same extern as well, so
cleanup it also.

Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-23 21:27:56 -07:00
Chuck Lever c1bd24b768 [TCP]: Remove unneeded implicit type cast when calling tcp_minshall_update()
The tcp_minshall_update() function is called in exactly one place, and is
passed an unsigned integer for the mss_len argument.  Make the sign of the
argument match the sign of the passed variable in order to eliminate an
unneeded implicit type cast and a mixed sign comparison in
tcp_minshall_update().

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-23 21:27:55 -07:00
Chuck Lever c2636b4d9e [NET]: Treat the sign of the result of skb_headroom() consistently
In some places, the result of skb_headroom() is compared to an unsigned
integer, and in others, the result is compared to a signed integer.  Make
the comparisons consistent and correct.

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-23 21:27:55 -07:00
Roel Kluin 0ffdd58149 [9P]: Fix missing unlock before return in p9_mux_poll_start
Signed-off-by: Roel Kluin <12o3l@tiscali.nl>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-23 21:27:54 -07:00
Pavel Emelyanov 0034622693 [PKT_SCHED]: Fix sch_prio.c build with CONFIG_NETDEVICES_MULTIQUEUE
Fix one more user of netiff_subqueue_stopped. To check for the
queue id one must use the __netiff_subqueue_stoped call.

This run out of my sight when I made the:

668f895a85
[NET]: Hide the queue_mapping field inside netif_subqueue_stopped

commit :(

Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-23 21:27:53 -07:00
Timo Teras 6a5f44d7a0 [IPV4] ip_gre: sendto/recvfrom NBMA address
When GRE tunnel is in NBMA mode, this patch allows an application to use
a PF_PACKET socket to:
- send a packet to specific NBMA address with sendto()
- use recvfrom() to receive packet and check which NBMA address it came from

This is required to implement properly NHRP over GRE tunnel.

Signed-off-by: Timo Teras <timo.teras@iki.fi>
Acked-by: Alexey Kuznetsov <kuznet@ms2.inr.ac.ru>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-23 21:27:53 -07:00
Pavel Emelyanov 16d14ef9f2 [SCTP]: Consolidate sctp_ulpq_renege_xxx functions
Both are equal, except for the list to be traversed.

Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Acked-by: Vlad Yasevich <vladislav.yasevich@hp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-23 21:27:52 -07:00
Denis V. Lunev 5c58298c25 [NETLINK]: Fix ACK processing after netlink_dump_start
Revert to original netlink behavior. Do not reply with ACK if the
netlink dump has bees successfully started.

libnl has been broken by the cd40b7d398
The following command reproduce the problem:
   /nl-route-get 192.168.1.1

Signed-off-by: Denis V. Lunev <den@openvz.org>
Acked-by: Thomas Graf <tgraf@suug.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-23 21:27:51 -07:00
Patrick McHardy be7f827360 [VLAN]: MAINTAINERS update
Ben stepped down from VLAN maintainership due to a lack of time, add
myself as new maintainer.

Signed-off-by: Patrick McHardy <kaber@trash.net>
Acked-by: Ben Greear <greearb@candelatech.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-23 21:27:51 -07:00
Arnaldo Carvalho de Melo 6273172e17 [DCCP]: Implement SIOCINQ/FIONREAD
Just like UDP.

Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Leandro Melo de Sales <leandroal@gmail.com>
Signed-off-by: Ian McDonald <ian.mcdonald@jandi.co.nz>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-23 21:27:50 -07:00
Jeff Garzik bada339ba2 [NET]: Validate device addr prior to interface-up
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-23 21:27:50 -07:00
Linus Torvalds c9927c2bf4 Linux 2.6.24-rc1
The patch is big.  Really big.  You just won't believe how vastly hugely
mindbogglingly big it is.  I mean you may think it's a long way down the
road to the chemist, but that's just peanuts to how big the patch from
2.6.23 is.

But it's all good.

Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-23 20:50:57 -07:00
Greg Ungerer f0c15f48bb add port definition for mcf UART driver
Add a port type definition for the Freescale UART driver ports (mcf.c).

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-23 20:45:44 -07:00
Greg Ungerer ee5a2402a1 m68knommu: remove unused machdep variable definitions
Remove old definitions of the timer function pointers.
Add definitions of the common hardware timer functions.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-23 20:45:44 -07:00
Greg Ungerer ee8c8ada29 m68knommu: define DMA channels for ColdFire 532x
Create definition for DMA channels on the ColdFire 532x family.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-23 20:45:44 -07:00
Greg Ungerer 99dc736fb3 m68knommu: add platform struct for ColdFire UART driver
Add platform support structure for use with new ColdFire UART driver.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-23 20:45:44 -07:00
Greg Ungerer f386c3ccf6 m68knommu: mark mem init functions as __init
Mark the m68knommu memory init functions as __init.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-23 20:45:44 -07:00
Greg Ungerer 1d2842e05a m68knommu: mark setup_arch() as __init
Mark the m68knommu setup_arch() function as __init.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-23 20:45:44 -07:00
Greg Ungerer 65fde4c6df m68knommu: cleanup 68VZ328 init code
Removed header includes not needed.
Remove use of old m68knommu timer function pointers.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-23 20:45:44 -07:00