148 lines
6.9 KiB
Plaintext
148 lines
6.9 KiB
Plaintext
Text file for the Linux SysKonnect Token Ring ISA/PCI Adapter Driver.
|
|
Text file by: Jay Schulist <jschlst@samba.org>
|
|
|
|
The Linux SysKonnect Token Ring driver works with the SysKonnect TR4/16(+) ISA,
|
|
SysKonnect TR4/16(+) PCI, SysKonnect TR4/16 PCI, and older revisions of the
|
|
SK NET TR4/16 ISA card.
|
|
|
|
Latest information on this driver can be obtained on the Linux-SNA WWW site.
|
|
Please point your browser to:
|
|
http://www.linux-sna.org
|
|
|
|
Many thanks to Christoph Goos for his excellent work on this driver and
|
|
SysKonnect for donating the adapters to Linux-SNA for the testing and
|
|
maintenance of this device driver.
|
|
|
|
Important information to be noted:
|
|
1. Adapters can be slow to open (~20 secs) and close (~5 secs), please be
|
|
patient.
|
|
2. This driver works very well when autoprobing for adapters. Why even
|
|
think about those nasty io/int/dma settings of modprobe when the driver
|
|
will do it all for you!
|
|
|
|
This driver is rather simple to use. Select Y to Token Ring adapter support
|
|
in the kernel configuration. A choice for SysKonnect Token Ring adapters will
|
|
appear. This drives supports all SysKonnect ISA and PCI adapters. Choose this
|
|
option. I personally recommend compiling the driver as a module (M), but if you
|
|
you would like to compile it statically answer Y instead.
|
|
|
|
This driver supports multiple adapters without the need to load multiple copies
|
|
of the driver. You should be able to load up to 7 adapters without any kernel
|
|
modifications, if you are in need of more please contact the maintainer of this
|
|
driver.
|
|
|
|
Load the driver either by lilo/loadlin or as a module. When a module using the
|
|
following command will suffice for most:
|
|
|
|
# modprobe sktr
|
|
|
|
This will produce output similar to the following: (Output is user specific)
|
|
|
|
sktr.c: v1.01 08/29/97 by Christoph Goos
|
|
tr0: SK NET TR 4/16 PCI found at 0x6100, using IRQ 17.
|
|
tr1: SK NET TR 4/16 PCI found at 0x6200, using IRQ 16.
|
|
tr2: SK NET TR 4/16 ISA found at 0xa20, using IRQ 10 and DMA 5.
|
|
|
|
Now just setup the device via ifconfig and set and routes you may have. After
|
|
this you are ready to start sending some tokens.
|
|
|
|
Errata:
|
|
For anyone wondering where to pick up the SysKonnect adapters please browse
|
|
to http://www.syskonnect.com
|
|
|
|
This driver is under the GNU General Public License. Its Firmware image is
|
|
included as an initialized C-array and is licensed by SysKonnect to the Linux
|
|
users of this driver. However no warranty about its fitness is expressed or
|
|
implied by SysKonnect.
|
|
|
|
Below find attached the setting for the SK NET TR 4/16 ISA adapters
|
|
-------------------------------------------------------------------
|
|
|
|
***************************
|
|
*** C O N T E N T S ***
|
|
***************************
|
|
|
|
1) Location of DIP-Switch W1
|
|
2) Default settings
|
|
3) DIP-Switch W1 description
|
|
|
|
|
|
==============================================================
|
|
CHAPTER 1 LOCATION OF DIP-SWITCH
|
|
==============================================================
|
|
|
|
UÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿
|
|
þUÄÄÄÄÄÄ¿ UÄÄÄÄÄ¿ UÄÄÄ¿ þ
|
|
þAÄÄÄÄÄÄU W1 AÄÄÄÄÄU UÄÄÄÄ¿ þ þ þ
|
|
þUÄÄÄÄÄÄ¿ þ þ þ þ UÄÄÅ¿
|
|
þAÄÄÄÄÄÄU UÄÄÄÄÄÄÄÄÄÄÄ¿ AÄÄÄÄU þ þ þ þþ
|
|
þUÄÄÄÄÄÄ¿ þ þ UÄÄÄ¿ AÄÄÄU AÄÄÅU
|
|
þAÄÄÄÄÄÄU þ TMS380C26 þ þ þ þ
|
|
þUÄÄÄÄÄÄ¿ þ þ AÄÄÄU AÄ¿
|
|
þAÄÄÄÄÄÄU þ þ þ þ
|
|
þ AÄÄÄÄÄÄÄÄÄÄÄU þ þ
|
|
þ þ þ
|
|
þ AÄU
|
|
þ þ
|
|
þ þ
|
|
þ þ
|
|
þ þ
|
|
AÄÄÄÄÄÄÄÄÄÄÄÄAÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄAÄÄAÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄAÄÄÄÄÄÄÄÄÄU
|
|
AÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄU AÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄU
|
|
|
|
==============================================================
|
|
CHAPTER 2 DEFAULT SETTINGS
|
|
==============================================================
|
|
|
|
W1 1 2 3 4 5 6 7 8
|
|
+------------------------------+
|
|
| ON X |
|
|
| OFF X X X X X X X |
|
|
+------------------------------+
|
|
|
|
W1.1 = ON Adapter drives address lines SA17..19
|
|
W1.2 - 1.5 = OFF BootROM disabled
|
|
W1.6 - 1.8 = OFF I/O address 0A20h
|
|
|
|
==============================================================
|
|
CHAPTER 3 DIP SWITCH W1 DESCRIPTION
|
|
==============================================================
|
|
|
|
UÄÄÄAÄÄÄAÄÄÄAÄÄÄAÄÄÄAÄÄÄAÄÄÄAÄÄÄ¿ ON
|
|
þ 1 þ 2 þ 3 þ 4 þ 5 þ 6 þ 7 þ 8 þ
|
|
AÄÄÄAÄÄÄAÄÄÄAÄÄÄAÄÄÄAÄÄÄAÄÄÄAÄÄÄU OFF
|
|
|AD | BootROM Addr. | I/O |
|
|
+-+-+-------+-------+-----+-----+
|
|
| | |
|
|
| | +------ 6 7 8
|
|
| | ON ON ON 1900h
|
|
| | ON ON OFF 0900h
|
|
| | ON OFF ON 1980h
|
|
| | ON OFF OFF 0980h
|
|
| | OFF ON ON 1b20h
|
|
| | OFF ON OFF 0b20h
|
|
| | OFF OFF ON 1a20h
|
|
| | OFF OFF OFF 0a20h (+)
|
|
| |
|
|
| |
|
|
| +-------- 2 3 4 5
|
|
| OFF x x x disabled (+)
|
|
| ON ON ON ON C0000
|
|
| ON ON ON OFF C4000
|
|
| ON ON OFF ON C8000
|
|
| ON ON OFF OFF CC000
|
|
| ON OFF ON ON D0000
|
|
| ON OFF ON OFF D4000
|
|
| ON OFF OFF ON D8000
|
|
| ON OFF OFF OFF DC000
|
|
|
|
|
|
|
|
+----- 1
|
|
OFF adapter does NOT drive SA<17..19>
|
|
ON adapter drives SA<17..19> (+)
|
|
|
|
|
|
(+) means default setting
|
|
|
|
********************************
|