799 lines
19 KiB
C
799 lines
19 KiB
C
/*
|
|
* Copyright 2011 Freescale Semiconductor, Inc.
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation; either version 2 of the License, or
|
|
* (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License along
|
|
* with this program; if not, write to the Free Software Foundation, Inc.,
|
|
* 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
|
|
*/
|
|
|
|
#include <linux/module.h>
|
|
#include <linux/init.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/dma-mapping.h>
|
|
#include <linux/clk.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/time.h>
|
|
#include <sound/core.h>
|
|
#include <sound/pcm.h>
|
|
#include <sound/pcm_params.h>
|
|
#include <sound/soc.h>
|
|
#include <sound/saif.h>
|
|
#include <mach/dma.h>
|
|
#include <asm/mach-types.h>
|
|
#include <mach/hardware.h>
|
|
#include <mach/mxs.h>
|
|
|
|
#include "mxs-saif.h"
|
|
|
|
static struct mxs_saif *mxs_saif[2];
|
|
|
|
/*
|
|
* SAIF is a little different with other normal SOC DAIs on clock using.
|
|
*
|
|
* For MXS, two SAIF modules are instantiated on-chip.
|
|
* Each SAIF has a set of clock pins and can be operating in master
|
|
* mode simultaneously if they are connected to different off-chip codecs.
|
|
* Also, one of the two SAIFs can master or drive the clock pins while the
|
|
* other SAIF, in slave mode, receives clocking from the master SAIF.
|
|
* This also means that both SAIFs must operate at the same sample rate.
|
|
*
|
|
* We abstract this as each saif has a master, the master could be
|
|
* himself or other saifs. In the generic saif driver, saif does not need
|
|
* to know the different clkmux. Saif only needs to know who is his master
|
|
* and operating his master to generate the proper clock rate for him.
|
|
* The master id is provided in mach-specific layer according to different
|
|
* clkmux setting.
|
|
*/
|
|
|
|
static int mxs_saif_set_dai_sysclk(struct snd_soc_dai *cpu_dai,
|
|
int clk_id, unsigned int freq, int dir)
|
|
{
|
|
struct mxs_saif *saif = snd_soc_dai_get_drvdata(cpu_dai);
|
|
|
|
switch (clk_id) {
|
|
case MXS_SAIF_MCLK:
|
|
saif->mclk = freq;
|
|
break;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* Since SAIF may work on EXTMASTER mode, IOW, it's working BITCLK&LRCLK
|
|
* is provided by other SAIF, we provide a interface here to get its master
|
|
* from its master_id.
|
|
* Note that the master could be himself.
|
|
*/
|
|
static inline struct mxs_saif *mxs_saif_get_master(struct mxs_saif * saif)
|
|
{
|
|
return mxs_saif[saif->master_id];
|
|
}
|
|
|
|
/*
|
|
* Set SAIF clock and MCLK
|
|
*/
|
|
static int mxs_saif_set_clk(struct mxs_saif *saif,
|
|
unsigned int mclk,
|
|
unsigned int rate)
|
|
{
|
|
u32 scr;
|
|
int ret;
|
|
struct mxs_saif *master_saif;
|
|
|
|
dev_dbg(saif->dev, "mclk %d rate %d\n", mclk, rate);
|
|
|
|
/* Set master saif to generate proper clock */
|
|
master_saif = mxs_saif_get_master(saif);
|
|
if (!master_saif)
|
|
return -EINVAL;
|
|
|
|
dev_dbg(saif->dev, "master saif%d\n", master_saif->id);
|
|
|
|
/* Checking if can playback and capture simutaneously */
|
|
if (master_saif->ongoing && rate != master_saif->cur_rate) {
|
|
dev_err(saif->dev,
|
|
"can not change clock, master saif%d(rate %d) is ongoing\n",
|
|
master_saif->id, master_saif->cur_rate);
|
|
return -EINVAL;
|
|
}
|
|
|
|
scr = __raw_readl(master_saif->base + SAIF_CTRL);
|
|
scr &= ~BM_SAIF_CTRL_BITCLK_MULT_RATE;
|
|
scr &= ~BM_SAIF_CTRL_BITCLK_BASE_RATE;
|
|
|
|
/*
|
|
* Set SAIF clock
|
|
*
|
|
* The SAIF clock should be either 384*fs or 512*fs.
|
|
* If MCLK is used, the SAIF clk ratio need to match mclk ratio.
|
|
* For 32x mclk, set saif clk as 512*fs.
|
|
* For 48x mclk, set saif clk as 384*fs.
|
|
*
|
|
* If MCLK is not used, we just set saif clk to 512*fs.
|
|
*/
|
|
if (master_saif->mclk_in_use) {
|
|
if (mclk % 32 == 0) {
|
|
scr &= ~BM_SAIF_CTRL_BITCLK_BASE_RATE;
|
|
ret = clk_set_rate(master_saif->clk, 512 * rate);
|
|
} else if (mclk % 48 == 0) {
|
|
scr |= BM_SAIF_CTRL_BITCLK_BASE_RATE;
|
|
ret = clk_set_rate(master_saif->clk, 384 * rate);
|
|
} else {
|
|
/* SAIF MCLK should be either 32x or 48x */
|
|
return -EINVAL;
|
|
}
|
|
} else {
|
|
ret = clk_set_rate(master_saif->clk, 512 * rate);
|
|
scr &= ~BM_SAIF_CTRL_BITCLK_BASE_RATE;
|
|
}
|
|
|
|
if (ret)
|
|
return ret;
|
|
|
|
master_saif->cur_rate = rate;
|
|
|
|
if (!master_saif->mclk_in_use) {
|
|
__raw_writel(scr, master_saif->base + SAIF_CTRL);
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* Program the over-sample rate for MCLK output
|
|
*
|
|
* The available MCLK range is 32x, 48x... 512x. The rate
|
|
* could be from 8kHz to 192kH.
|
|
*/
|
|
switch (mclk / rate) {
|
|
case 32:
|
|
scr |= BF_SAIF_CTRL_BITCLK_MULT_RATE(4);
|
|
break;
|
|
case 64:
|
|
scr |= BF_SAIF_CTRL_BITCLK_MULT_RATE(3);
|
|
break;
|
|
case 128:
|
|
scr |= BF_SAIF_CTRL_BITCLK_MULT_RATE(2);
|
|
break;
|
|
case 256:
|
|
scr |= BF_SAIF_CTRL_BITCLK_MULT_RATE(1);
|
|
break;
|
|
case 512:
|
|
scr |= BF_SAIF_CTRL_BITCLK_MULT_RATE(0);
|
|
break;
|
|
case 48:
|
|
scr |= BF_SAIF_CTRL_BITCLK_MULT_RATE(3);
|
|
break;
|
|
case 96:
|
|
scr |= BF_SAIF_CTRL_BITCLK_MULT_RATE(2);
|
|
break;
|
|
case 192:
|
|
scr |= BF_SAIF_CTRL_BITCLK_MULT_RATE(1);
|
|
break;
|
|
case 384:
|
|
scr |= BF_SAIF_CTRL_BITCLK_MULT_RATE(0);
|
|
break;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
|
|
__raw_writel(scr, master_saif->base + SAIF_CTRL);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* Put and disable MCLK.
|
|
*/
|
|
int mxs_saif_put_mclk(unsigned int saif_id)
|
|
{
|
|
struct mxs_saif *saif = mxs_saif[saif_id];
|
|
u32 stat;
|
|
|
|
if (!saif)
|
|
return -EINVAL;
|
|
|
|
stat = __raw_readl(saif->base + SAIF_STAT);
|
|
if (stat & BM_SAIF_STAT_BUSY) {
|
|
dev_err(saif->dev, "error: busy\n");
|
|
return -EBUSY;
|
|
}
|
|
|
|
clk_disable(saif->clk);
|
|
|
|
/* disable MCLK output */
|
|
__raw_writel(BM_SAIF_CTRL_CLKGATE,
|
|
saif->base + SAIF_CTRL + MXS_SET_ADDR);
|
|
__raw_writel(BM_SAIF_CTRL_RUN,
|
|
saif->base + SAIF_CTRL + MXS_CLR_ADDR);
|
|
|
|
saif->mclk_in_use = 0;
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* Get MCLK and set clock rate, then enable it
|
|
*
|
|
* This interface is used for codecs who are using MCLK provided
|
|
* by saif.
|
|
*/
|
|
int mxs_saif_get_mclk(unsigned int saif_id, unsigned int mclk,
|
|
unsigned int rate)
|
|
{
|
|
struct mxs_saif *saif = mxs_saif[saif_id];
|
|
u32 stat;
|
|
int ret;
|
|
struct mxs_saif *master_saif;
|
|
|
|
if (!saif)
|
|
return -EINVAL;
|
|
|
|
/* Clear Reset */
|
|
__raw_writel(BM_SAIF_CTRL_SFTRST,
|
|
saif->base + SAIF_CTRL + MXS_CLR_ADDR);
|
|
|
|
/* FIXME: need clear clk gate for register r/w */
|
|
__raw_writel(BM_SAIF_CTRL_CLKGATE,
|
|
saif->base + SAIF_CTRL + MXS_CLR_ADDR);
|
|
|
|
master_saif = mxs_saif_get_master(saif);
|
|
if (saif != master_saif) {
|
|
dev_err(saif->dev, "can not get mclk from a non-master saif\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
stat = __raw_readl(saif->base + SAIF_STAT);
|
|
if (stat & BM_SAIF_STAT_BUSY) {
|
|
dev_err(saif->dev, "error: busy\n");
|
|
return -EBUSY;
|
|
}
|
|
|
|
saif->mclk_in_use = 1;
|
|
ret = mxs_saif_set_clk(saif, mclk, rate);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = clk_enable(saif->clk);
|
|
if (ret)
|
|
return ret;
|
|
|
|
/* enable MCLK output */
|
|
__raw_writel(BM_SAIF_CTRL_RUN,
|
|
saif->base + SAIF_CTRL + MXS_SET_ADDR);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* SAIF DAI format configuration.
|
|
* Should only be called when port is inactive.
|
|
*/
|
|
static int mxs_saif_set_dai_fmt(struct snd_soc_dai *cpu_dai, unsigned int fmt)
|
|
{
|
|
u32 scr, stat;
|
|
u32 scr0;
|
|
struct mxs_saif *saif = snd_soc_dai_get_drvdata(cpu_dai);
|
|
|
|
stat = __raw_readl(saif->base + SAIF_STAT);
|
|
if (stat & BM_SAIF_STAT_BUSY) {
|
|
dev_err(cpu_dai->dev, "error: busy\n");
|
|
return -EBUSY;
|
|
}
|
|
|
|
scr0 = __raw_readl(saif->base + SAIF_CTRL);
|
|
scr0 = scr0 & ~BM_SAIF_CTRL_BITCLK_EDGE & ~BM_SAIF_CTRL_LRCLK_POLARITY \
|
|
& ~BM_SAIF_CTRL_JUSTIFY & ~BM_SAIF_CTRL_DELAY;
|
|
scr = 0;
|
|
|
|
/* DAI mode */
|
|
switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) {
|
|
case SND_SOC_DAIFMT_I2S:
|
|
/* data frame low 1clk before data */
|
|
scr |= BM_SAIF_CTRL_DELAY;
|
|
scr &= ~BM_SAIF_CTRL_LRCLK_POLARITY;
|
|
break;
|
|
case SND_SOC_DAIFMT_LEFT_J:
|
|
/* data frame high with data */
|
|
scr &= ~BM_SAIF_CTRL_DELAY;
|
|
scr &= ~BM_SAIF_CTRL_LRCLK_POLARITY;
|
|
scr &= ~BM_SAIF_CTRL_JUSTIFY;
|
|
break;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
|
|
/* DAI clock inversion */
|
|
switch (fmt & SND_SOC_DAIFMT_INV_MASK) {
|
|
case SND_SOC_DAIFMT_IB_IF:
|
|
scr |= BM_SAIF_CTRL_BITCLK_EDGE;
|
|
scr |= BM_SAIF_CTRL_LRCLK_POLARITY;
|
|
break;
|
|
case SND_SOC_DAIFMT_IB_NF:
|
|
scr |= BM_SAIF_CTRL_BITCLK_EDGE;
|
|
scr &= ~BM_SAIF_CTRL_LRCLK_POLARITY;
|
|
break;
|
|
case SND_SOC_DAIFMT_NB_IF:
|
|
scr &= ~BM_SAIF_CTRL_BITCLK_EDGE;
|
|
scr |= BM_SAIF_CTRL_LRCLK_POLARITY;
|
|
break;
|
|
case SND_SOC_DAIFMT_NB_NF:
|
|
scr &= ~BM_SAIF_CTRL_BITCLK_EDGE;
|
|
scr &= ~BM_SAIF_CTRL_LRCLK_POLARITY;
|
|
break;
|
|
}
|
|
|
|
/*
|
|
* Note: We simply just support master mode since SAIF TX can only
|
|
* work as master.
|
|
* Here the master is relative to codec side.
|
|
* Saif internally could be slave when working on EXTMASTER mode.
|
|
* We just hide this to machine driver.
|
|
*/
|
|
switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) {
|
|
case SND_SOC_DAIFMT_CBS_CFS:
|
|
if (saif->id == saif->master_id)
|
|
scr &= ~BM_SAIF_CTRL_SLAVE_MODE;
|
|
else
|
|
scr |= BM_SAIF_CTRL_SLAVE_MODE;
|
|
|
|
__raw_writel(scr | scr0, saif->base + SAIF_CTRL);
|
|
break;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int mxs_saif_startup(struct snd_pcm_substream *substream,
|
|
struct snd_soc_dai *cpu_dai)
|
|
{
|
|
struct mxs_saif *saif = snd_soc_dai_get_drvdata(cpu_dai);
|
|
snd_soc_dai_set_dma_data(cpu_dai, substream, &saif->dma_param);
|
|
|
|
/* clear error status to 0 for each re-open */
|
|
saif->fifo_underrun = 0;
|
|
saif->fifo_overrun = 0;
|
|
|
|
/* Clear Reset for normal operations */
|
|
__raw_writel(BM_SAIF_CTRL_SFTRST,
|
|
saif->base + SAIF_CTRL + MXS_CLR_ADDR);
|
|
|
|
/* clear clock gate */
|
|
__raw_writel(BM_SAIF_CTRL_CLKGATE,
|
|
saif->base + SAIF_CTRL + MXS_CLR_ADDR);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* Should only be called when port is inactive.
|
|
* although can be called multiple times by upper layers.
|
|
*/
|
|
static int mxs_saif_hw_params(struct snd_pcm_substream *substream,
|
|
struct snd_pcm_hw_params *params,
|
|
struct snd_soc_dai *cpu_dai)
|
|
{
|
|
struct mxs_saif *saif = snd_soc_dai_get_drvdata(cpu_dai);
|
|
u32 scr, stat;
|
|
int ret;
|
|
|
|
/* mclk should already be set */
|
|
if (!saif->mclk && saif->mclk_in_use) {
|
|
dev_err(cpu_dai->dev, "set mclk first\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
stat = __raw_readl(saif->base + SAIF_STAT);
|
|
if (stat & BM_SAIF_STAT_BUSY) {
|
|
dev_err(cpu_dai->dev, "error: busy\n");
|
|
return -EBUSY;
|
|
}
|
|
|
|
/*
|
|
* Set saif clk based on sample rate.
|
|
* If mclk is used, we also set mclk, if not, saif->mclk is
|
|
* default 0, means not used.
|
|
*/
|
|
ret = mxs_saif_set_clk(saif, saif->mclk, params_rate(params));
|
|
if (ret) {
|
|
dev_err(cpu_dai->dev, "unable to get proper clk\n");
|
|
return ret;
|
|
}
|
|
|
|
scr = __raw_readl(saif->base + SAIF_CTRL);
|
|
|
|
scr &= ~BM_SAIF_CTRL_WORD_LENGTH;
|
|
scr &= ~BM_SAIF_CTRL_BITCLK_48XFS_ENABLE;
|
|
switch (params_format(params)) {
|
|
case SNDRV_PCM_FORMAT_S16_LE:
|
|
scr |= BF_SAIF_CTRL_WORD_LENGTH(0);
|
|
break;
|
|
case SNDRV_PCM_FORMAT_S20_3LE:
|
|
scr |= BF_SAIF_CTRL_WORD_LENGTH(4);
|
|
scr |= BM_SAIF_CTRL_BITCLK_48XFS_ENABLE;
|
|
break;
|
|
case SNDRV_PCM_FORMAT_S24_LE:
|
|
scr |= BF_SAIF_CTRL_WORD_LENGTH(8);
|
|
scr |= BM_SAIF_CTRL_BITCLK_48XFS_ENABLE;
|
|
break;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
|
|
/* Tx/Rx config */
|
|
if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) {
|
|
/* enable TX mode */
|
|
scr &= ~BM_SAIF_CTRL_READ_MODE;
|
|
} else {
|
|
/* enable RX mode */
|
|
scr |= BM_SAIF_CTRL_READ_MODE;
|
|
}
|
|
|
|
__raw_writel(scr, saif->base + SAIF_CTRL);
|
|
return 0;
|
|
}
|
|
|
|
static int mxs_saif_prepare(struct snd_pcm_substream *substream,
|
|
struct snd_soc_dai *cpu_dai)
|
|
{
|
|
struct mxs_saif *saif = snd_soc_dai_get_drvdata(cpu_dai);
|
|
|
|
/* enable FIFO error irqs */
|
|
__raw_writel(BM_SAIF_CTRL_FIFO_ERROR_IRQ_EN,
|
|
saif->base + SAIF_CTRL + MXS_SET_ADDR);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int mxs_saif_trigger(struct snd_pcm_substream *substream, int cmd,
|
|
struct snd_soc_dai *cpu_dai)
|
|
{
|
|
struct mxs_saif *saif = snd_soc_dai_get_drvdata(cpu_dai);
|
|
struct mxs_saif *master_saif;
|
|
u32 delay;
|
|
|
|
master_saif = mxs_saif_get_master(saif);
|
|
if (!master_saif)
|
|
return -EINVAL;
|
|
|
|
switch (cmd) {
|
|
case SNDRV_PCM_TRIGGER_START:
|
|
case SNDRV_PCM_TRIGGER_RESUME:
|
|
case SNDRV_PCM_TRIGGER_PAUSE_RELEASE:
|
|
dev_dbg(cpu_dai->dev, "start\n");
|
|
|
|
clk_enable(master_saif->clk);
|
|
if (!master_saif->mclk_in_use)
|
|
__raw_writel(BM_SAIF_CTRL_RUN,
|
|
master_saif->base + SAIF_CTRL + MXS_SET_ADDR);
|
|
|
|
/*
|
|
* If the saif's master is not himself, we also need to enable
|
|
* itself clk for its internal basic logic to work.
|
|
*/
|
|
if (saif != master_saif) {
|
|
clk_enable(saif->clk);
|
|
__raw_writel(BM_SAIF_CTRL_RUN,
|
|
saif->base + SAIF_CTRL + MXS_SET_ADDR);
|
|
}
|
|
|
|
if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) {
|
|
/*
|
|
* write a data to saif data register to trigger
|
|
* the transfer
|
|
*/
|
|
__raw_writel(0, saif->base + SAIF_DATA);
|
|
} else {
|
|
/*
|
|
* read a data from saif data register to trigger
|
|
* the receive
|
|
*/
|
|
__raw_readl(saif->base + SAIF_DATA);
|
|
}
|
|
|
|
master_saif->ongoing = 1;
|
|
|
|
dev_dbg(saif->dev, "CTRL 0x%x STAT 0x%x\n",
|
|
__raw_readl(saif->base + SAIF_CTRL),
|
|
__raw_readl(saif->base + SAIF_STAT));
|
|
|
|
dev_dbg(master_saif->dev, "CTRL 0x%x STAT 0x%x\n",
|
|
__raw_readl(master_saif->base + SAIF_CTRL),
|
|
__raw_readl(master_saif->base + SAIF_STAT));
|
|
break;
|
|
case SNDRV_PCM_TRIGGER_SUSPEND:
|
|
case SNDRV_PCM_TRIGGER_STOP:
|
|
case SNDRV_PCM_TRIGGER_PAUSE_PUSH:
|
|
dev_dbg(cpu_dai->dev, "stop\n");
|
|
|
|
/* wait a while for the current sample to complete */
|
|
delay = USEC_PER_SEC / master_saif->cur_rate;
|
|
|
|
if (!master_saif->mclk_in_use) {
|
|
__raw_writel(BM_SAIF_CTRL_RUN,
|
|
master_saif->base + SAIF_CTRL + MXS_CLR_ADDR);
|
|
udelay(delay);
|
|
}
|
|
clk_disable(master_saif->clk);
|
|
|
|
if (saif != master_saif) {
|
|
__raw_writel(BM_SAIF_CTRL_RUN,
|
|
saif->base + SAIF_CTRL + MXS_CLR_ADDR);
|
|
udelay(delay);
|
|
clk_disable(saif->clk);
|
|
}
|
|
|
|
master_saif->ongoing = 0;
|
|
|
|
break;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
#define MXS_SAIF_RATES SNDRV_PCM_RATE_8000_192000
|
|
#define MXS_SAIF_FORMATS \
|
|
(SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S20_3LE | \
|
|
SNDRV_PCM_FMTBIT_S24_LE)
|
|
|
|
static struct snd_soc_dai_ops mxs_saif_dai_ops = {
|
|
.startup = mxs_saif_startup,
|
|
.trigger = mxs_saif_trigger,
|
|
.prepare = mxs_saif_prepare,
|
|
.hw_params = mxs_saif_hw_params,
|
|
.set_sysclk = mxs_saif_set_dai_sysclk,
|
|
.set_fmt = mxs_saif_set_dai_fmt,
|
|
};
|
|
|
|
static int mxs_saif_dai_probe(struct snd_soc_dai *dai)
|
|
{
|
|
struct mxs_saif *saif = dev_get_drvdata(dai->dev);
|
|
|
|
snd_soc_dai_set_drvdata(dai, saif);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static struct snd_soc_dai_driver mxs_saif_dai = {
|
|
.name = "mxs-saif",
|
|
.probe = mxs_saif_dai_probe,
|
|
.playback = {
|
|
.channels_min = 2,
|
|
.channels_max = 2,
|
|
.rates = MXS_SAIF_RATES,
|
|
.formats = MXS_SAIF_FORMATS,
|
|
},
|
|
.capture = {
|
|
.channels_min = 2,
|
|
.channels_max = 2,
|
|
.rates = MXS_SAIF_RATES,
|
|
.formats = MXS_SAIF_FORMATS,
|
|
},
|
|
.ops = &mxs_saif_dai_ops,
|
|
};
|
|
|
|
static irqreturn_t mxs_saif_irq(int irq, void *dev_id)
|
|
{
|
|
struct mxs_saif *saif = dev_id;
|
|
unsigned int stat;
|
|
|
|
stat = __raw_readl(saif->base + SAIF_STAT);
|
|
if (!(stat & (BM_SAIF_STAT_FIFO_UNDERFLOW_IRQ |
|
|
BM_SAIF_STAT_FIFO_OVERFLOW_IRQ)))
|
|
return IRQ_NONE;
|
|
|
|
if (stat & BM_SAIF_STAT_FIFO_UNDERFLOW_IRQ) {
|
|
dev_dbg(saif->dev, "underrun!!! %d\n", ++saif->fifo_underrun);
|
|
__raw_writel(BM_SAIF_STAT_FIFO_UNDERFLOW_IRQ,
|
|
saif->base + SAIF_STAT + MXS_CLR_ADDR);
|
|
}
|
|
|
|
if (stat & BM_SAIF_STAT_FIFO_OVERFLOW_IRQ) {
|
|
dev_dbg(saif->dev, "overrun!!! %d\n", ++saif->fifo_overrun);
|
|
__raw_writel(BM_SAIF_STAT_FIFO_OVERFLOW_IRQ,
|
|
saif->base + SAIF_STAT + MXS_CLR_ADDR);
|
|
}
|
|
|
|
dev_dbg(saif->dev, "SAIF_CTRL %x SAIF_STAT %x\n",
|
|
__raw_readl(saif->base + SAIF_CTRL),
|
|
__raw_readl(saif->base + SAIF_STAT));
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static int mxs_saif_probe(struct platform_device *pdev)
|
|
{
|
|
struct resource *iores, *dmares;
|
|
struct mxs_saif *saif;
|
|
struct mxs_saif_platform_data *pdata;
|
|
int ret = 0;
|
|
|
|
if (pdev->id >= ARRAY_SIZE(mxs_saif))
|
|
return -EINVAL;
|
|
|
|
pdata = pdev->dev.platform_data;
|
|
if (pdata && pdata->init) {
|
|
ret = pdata->init();
|
|
if (ret)
|
|
return ret;
|
|
}
|
|
|
|
saif = kzalloc(sizeof(*saif), GFP_KERNEL);
|
|
if (!saif)
|
|
return -ENOMEM;
|
|
|
|
mxs_saif[pdev->id] = saif;
|
|
saif->id = pdev->id;
|
|
|
|
saif->master_id = saif->id;
|
|
if (pdata && pdata->get_master_id) {
|
|
saif->master_id = pdata->get_master_id(saif->id);
|
|
if (saif->master_id < 0 ||
|
|
saif->master_id >= ARRAY_SIZE(mxs_saif))
|
|
return -EINVAL;
|
|
}
|
|
|
|
saif->clk = clk_get(&pdev->dev, NULL);
|
|
if (IS_ERR(saif->clk)) {
|
|
ret = PTR_ERR(saif->clk);
|
|
dev_err(&pdev->dev, "Cannot get the clock: %d\n",
|
|
ret);
|
|
goto failed_clk;
|
|
}
|
|
|
|
iores = platform_get_resource(pdev, IORESOURCE_MEM, 0);
|
|
if (!iores) {
|
|
ret = -ENODEV;
|
|
dev_err(&pdev->dev, "failed to get io resource: %d\n",
|
|
ret);
|
|
goto failed_get_resource;
|
|
}
|
|
|
|
if (!request_mem_region(iores->start, resource_size(iores),
|
|
"mxs-saif")) {
|
|
dev_err(&pdev->dev, "request_mem_region failed\n");
|
|
ret = -EBUSY;
|
|
goto failed_get_resource;
|
|
}
|
|
|
|
saif->base = ioremap(iores->start, resource_size(iores));
|
|
if (!saif->base) {
|
|
dev_err(&pdev->dev, "ioremap failed\n");
|
|
ret = -ENODEV;
|
|
goto failed_ioremap;
|
|
}
|
|
|
|
dmares = platform_get_resource(pdev, IORESOURCE_DMA, 0);
|
|
if (!dmares) {
|
|
ret = -ENODEV;
|
|
dev_err(&pdev->dev, "failed to get dma resource: %d\n",
|
|
ret);
|
|
goto failed_ioremap;
|
|
}
|
|
saif->dma_param.chan_num = dmares->start;
|
|
|
|
saif->irq = platform_get_irq(pdev, 0);
|
|
if (saif->irq < 0) {
|
|
ret = saif->irq;
|
|
dev_err(&pdev->dev, "failed to get irq resource: %d\n",
|
|
ret);
|
|
goto failed_get_irq1;
|
|
}
|
|
|
|
saif->dev = &pdev->dev;
|
|
ret = request_irq(saif->irq, mxs_saif_irq, 0, "mxs-saif", saif);
|
|
if (ret) {
|
|
dev_err(&pdev->dev, "failed to request irq\n");
|
|
goto failed_get_irq1;
|
|
}
|
|
|
|
saif->dma_param.chan_irq = platform_get_irq(pdev, 1);
|
|
if (saif->dma_param.chan_irq < 0) {
|
|
ret = saif->dma_param.chan_irq;
|
|
dev_err(&pdev->dev, "failed to get dma irq resource: %d\n",
|
|
ret);
|
|
goto failed_get_irq2;
|
|
}
|
|
|
|
platform_set_drvdata(pdev, saif);
|
|
|
|
ret = snd_soc_register_dai(&pdev->dev, &mxs_saif_dai);
|
|
if (ret) {
|
|
dev_err(&pdev->dev, "register DAI failed\n");
|
|
goto failed_register;
|
|
}
|
|
|
|
saif->soc_platform_pdev = platform_device_alloc(
|
|
"mxs-pcm-audio", pdev->id);
|
|
if (!saif->soc_platform_pdev) {
|
|
ret = -ENOMEM;
|
|
goto failed_pdev_alloc;
|
|
}
|
|
|
|
platform_set_drvdata(saif->soc_platform_pdev, saif);
|
|
ret = platform_device_add(saif->soc_platform_pdev);
|
|
if (ret) {
|
|
dev_err(&pdev->dev, "failed to add soc platform device\n");
|
|
goto failed_pdev_add;
|
|
}
|
|
|
|
return 0;
|
|
|
|
failed_pdev_add:
|
|
platform_device_put(saif->soc_platform_pdev);
|
|
failed_pdev_alloc:
|
|
snd_soc_unregister_dai(&pdev->dev);
|
|
failed_register:
|
|
failed_get_irq2:
|
|
free_irq(saif->irq, saif);
|
|
failed_get_irq1:
|
|
iounmap(saif->base);
|
|
failed_ioremap:
|
|
release_mem_region(iores->start, resource_size(iores));
|
|
failed_get_resource:
|
|
clk_put(saif->clk);
|
|
failed_clk:
|
|
kfree(saif);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int __devexit mxs_saif_remove(struct platform_device *pdev)
|
|
{
|
|
struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
|
|
struct mxs_saif *saif = platform_get_drvdata(pdev);
|
|
|
|
platform_device_unregister(saif->soc_platform_pdev);
|
|
|
|
snd_soc_unregister_dai(&pdev->dev);
|
|
|
|
iounmap(saif->base);
|
|
release_mem_region(res->start, resource_size(res));
|
|
free_irq(saif->irq, saif);
|
|
|
|
clk_put(saif->clk);
|
|
kfree(saif);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static struct platform_driver mxs_saif_driver = {
|
|
.probe = mxs_saif_probe,
|
|
.remove = __devexit_p(mxs_saif_remove),
|
|
|
|
.driver = {
|
|
.name = "mxs-saif",
|
|
.owner = THIS_MODULE,
|
|
},
|
|
};
|
|
|
|
static int __init mxs_saif_init(void)
|
|
{
|
|
return platform_driver_register(&mxs_saif_driver);
|
|
}
|
|
|
|
static void __exit mxs_saif_exit(void)
|
|
{
|
|
platform_driver_unregister(&mxs_saif_driver);
|
|
}
|
|
|
|
module_init(mxs_saif_init);
|
|
module_exit(mxs_saif_exit);
|
|
MODULE_AUTHOR("Freescale Semiconductor, Inc.");
|
|
MODULE_DESCRIPTION("MXS ASoC SAIF driver");
|
|
MODULE_LICENSE("GPL");
|