Eric Miao 69bdea7047 [ARM] pxafb: allow insertion of delay to the smart panel command sequence ... Some smart panel requires a delay between command sequences, while PXA LCD controller didn't provide such one, let's emulate this by software. A software delay marker can be inserted into the command sequence, once pxafb_smart_queue() detects this, it flushes the previous commands and delay for a specified number of milliseconds. Signed-off-by: Eric Miao <eric.miao@marvell.com>		2008-12-17 22:50:52 +08:00
..
audio.h	…
bitfield.h	…
camera.h	V4L/DVB (8687): soc-camera: Move .power and .reset from soc_camera host to sensor driver	2008-10-12 09:36:50 -02:00
colibri.h	…
corgi.h	Revert "[ARM] pxa/corgi: remove now unused corgi_ssp.c and corgi_lcd.c"	2008-10-21 09:42:29 +08:00
debug-macro.S	…
dma.h	…
entry-macro.S	…
eseries-gpio.h	…
eseries-irq.h	…
gpio.h	…
gumstix.h	…
h5000.h	[ARM] pxa: add basic support for HP iPAQ h5000	2008-12-02 14:43:50 +08:00
hardware.h	[ARM] pxa: introduced cpu_is_pxa935() and cpu_is_pxa9xx()	2008-12-02 14:42:40 +08:00
i2c.h	…
idp.h	…
io.h	…
irda.h	…
irqs.h	[ARM] pxa: fix redefinition of NR_IRQS	2008-10-17 13:19:08 +01:00
littleton.h	…
lpd270.h	…
lubbock.h	…
magician.h	…
mainstone.h	…
memory.h	…
mfp-pxa2xx.h	…
mfp-pxa3xx.h	…
mfp-pxa25x.h	[ARM] pxa: add support for additional GPIOs on PXA26x	2008-12-02 14:42:37 +08:00
mfp-pxa27x.h	[ARM] pxa: add missing GPIOs definitions	2008-12-02 14:42:41 +08:00
mfp-pxa300.h	…
mfp-pxa320.h	…
mfp-pxa930.h	…
mfp.h	…
mioa701.h	[ARM] pxa/MioA701: discovered new gpio definitions.	2008-12-02 14:43:48 +08:00
mmc.h	…
mtd-xip.h	…
ohci.h	[ARM] ohci-pxa27x: introduce flags to avoid direct access to OHCI registers	2008-10-07 19:12:57 +01:00
palmtx.h	…
palmz72.h	[ARM] 5239/1: Palm Zire 72 power management support	2008-10-09 15:12:07 +01:00
pcm027.h	…
pcm990_baseboard.h	…
pm.h	…
poodle.h	…
pxa-regs.h	[ARM] pxa: include <mach/hardware.h> in pxa-regs.h	2008-12-02 14:42:39 +08:00
pxa2xx-gpio.h	[ARM] pxa: removed unused declarations of pxa_gpio_* in hardware.h	2008-12-02 14:42:37 +08:00
pxa2xx-regs.h	[ARM] pxa: cpufreq-pxa2xx: sdram_rows detection support	2008-12-02 14:43:47 +08:00
pxa2xx_spi.h	…
pxa3xx-regs.h	[ARM] pxa: add missing ACCR bit definitions to pxa3xx-regs.h	2008-10-07 19:12:59 +01:00
pxa3xx_nand.h	…
pxa25x-udc.h	…
pxa27x-udc.h	…
pxa27x_keypad.h	…
pxafb.h	[ARM] pxafb: allow better platform configurable smart panel timing	2008-12-17 22:50:40 +08:00
regs-ac97.h	[ARM] pxa: move AC97 register definitions into dedicated regs-ac97.h	2008-12-02 14:42:39 +08:00
regs-lcd.h	[ARM] pxafb: allow insertion of delay to the smart panel command sequence	2008-12-17 22:50:52 +08:00
regs-ssp.h	…
regs-uart.h	[ARM] pxa: move UART register definitions into dedicated regs-uart.h	2008-12-02 14:42:38 +08:00
reset.h	[ARM] 5300/1: fixup spitz reset during boot	2008-10-11 09:52:38 +01:00
sharpsl.h	[ARM] corgi_lcd: fix simultaneous compilation with corgi_bl	2008-10-29 11:45:37 +08:00
spitz.h	[ARM] pxa/spitz: fix unbalance parenthesis in header file spitz.h	2008-10-21 22:45:57 +08:00
ssp.h	…
system.h	…
timex.h	…
tosa.h	backlight: add support for Sharp SL-6000 LCD and backlight drivers	2008-10-21 00:19:49 +01:00
tosa_bt.h	…
trizeps4.h	…
udc.h	…
uncompress.h	[ARM] pxa: move UART register definitions into dedicated regs-uart.h	2008-12-02 14:42:38 +08:00
viper.h	…
vmalloc.h	…
zylonite.h	misc: replace remaining __FUNCTION__ with __func__	2008-10-20 16:17:42 -07:00