656 lines
20 KiB
C
656 lines
20 KiB
C
/*
|
|
* lm90.c - Part of lm_sensors, Linux kernel modules for hardware
|
|
* monitoring
|
|
* Copyright (C) 2003-2005 Jean Delvare <khali@linux-fr.org>
|
|
*
|
|
* Based on the lm83 driver. The LM90 is a sensor chip made by National
|
|
* Semiconductor. It reports up to two temperatures (its own plus up to
|
|
* one external one) with a 0.125 deg resolution (1 deg for local
|
|
* temperature) and a 3-4 deg accuracy. Complete datasheet can be
|
|
* obtained from National's website at:
|
|
* http://www.national.com/pf/LM/LM90.html
|
|
*
|
|
* This driver also supports the LM89 and LM99, two other sensor chips
|
|
* made by National Semiconductor. Both have an increased remote
|
|
* temperature measurement accuracy (1 degree), and the LM99
|
|
* additionally shifts remote temperatures (measured and limits) by 16
|
|
* degrees, which allows for higher temperatures measurement. The
|
|
* driver doesn't handle it since it can be done easily in user-space.
|
|
* Complete datasheets can be obtained from National's website at:
|
|
* http://www.national.com/pf/LM/LM89.html
|
|
* http://www.national.com/pf/LM/LM99.html
|
|
* Note that there is no way to differentiate between both chips.
|
|
*
|
|
* This driver also supports the LM86, another sensor chip made by
|
|
* National Semiconductor. It is exactly similar to the LM90 except it
|
|
* has a higher accuracy.
|
|
* Complete datasheet can be obtained from National's website at:
|
|
* http://www.national.com/pf/LM/LM86.html
|
|
*
|
|
* This driver also supports the ADM1032, a sensor chip made by Analog
|
|
* Devices. That chip is similar to the LM90, with a few differences
|
|
* that are not handled by this driver. Complete datasheet can be
|
|
* obtained from Analog's website at:
|
|
* http://products.analog.com/products/info.asp?product=ADM1032
|
|
* Among others, it has a higher accuracy than the LM90, much like the
|
|
* LM86 does.
|
|
*
|
|
* This driver also supports the MAX6657, MAX6658 and MAX6659 sensor
|
|
* chips made by Maxim. These chips are similar to the LM86. Complete
|
|
* datasheet can be obtained at Maxim's website at:
|
|
* http://www.maxim-ic.com/quick_view2.cfm/qv_pk/2578
|
|
* Note that there is no easy way to differentiate between the three
|
|
* variants. The extra address and features of the MAX6659 are not
|
|
* supported by this driver.
|
|
*
|
|
* This driver also supports the ADT7461 chip from Analog Devices but
|
|
* only in its "compatability mode". If an ADT7461 chip is found but
|
|
* is configured in non-compatible mode (where its temperature
|
|
* register values are decoded differently) it is ignored by this
|
|
* driver. Complete datasheet can be obtained from Analog's website
|
|
* at:
|
|
* http://products.analog.com/products/info.asp?product=ADT7461
|
|
*
|
|
* Since the LM90 was the first chipset supported by this driver, most
|
|
* comments will refer to this chipset, but are actually general and
|
|
* concern all supported chipsets, unless mentioned otherwise.
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation; either version 2 of the License, or
|
|
* (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
|
|
*/
|
|
|
|
#include <linux/module.h>
|
|
#include <linux/init.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/jiffies.h>
|
|
#include <linux/i2c.h>
|
|
#include <linux/i2c-sensor.h>
|
|
#include <linux/hwmon-sysfs.h>
|
|
|
|
/*
|
|
* Addresses to scan
|
|
* Address is fully defined internally and cannot be changed except for
|
|
* MAX6659.
|
|
* LM86, LM89, LM90, LM99, ADM1032, MAX6657 and MAX6658 have address 0x4c.
|
|
* LM89-1, and LM99-1 have address 0x4d.
|
|
* MAX6659 can have address 0x4c, 0x4d or 0x4e (unsupported).
|
|
* ADT7461 always has address 0x4c.
|
|
*/
|
|
|
|
static unsigned short normal_i2c[] = { 0x4c, 0x4d, I2C_CLIENT_END };
|
|
static unsigned int normal_isa[] = { I2C_CLIENT_ISA_END };
|
|
|
|
/*
|
|
* Insmod parameters
|
|
*/
|
|
|
|
SENSORS_INSMOD_6(lm90, adm1032, lm99, lm86, max6657, adt7461);
|
|
|
|
/*
|
|
* The LM90 registers
|
|
*/
|
|
|
|
#define LM90_REG_R_MAN_ID 0xFE
|
|
#define LM90_REG_R_CHIP_ID 0xFF
|
|
#define LM90_REG_R_CONFIG1 0x03
|
|
#define LM90_REG_W_CONFIG1 0x09
|
|
#define LM90_REG_R_CONFIG2 0xBF
|
|
#define LM90_REG_W_CONFIG2 0xBF
|
|
#define LM90_REG_R_CONVRATE 0x04
|
|
#define LM90_REG_W_CONVRATE 0x0A
|
|
#define LM90_REG_R_STATUS 0x02
|
|
#define LM90_REG_R_LOCAL_TEMP 0x00
|
|
#define LM90_REG_R_LOCAL_HIGH 0x05
|
|
#define LM90_REG_W_LOCAL_HIGH 0x0B
|
|
#define LM90_REG_R_LOCAL_LOW 0x06
|
|
#define LM90_REG_W_LOCAL_LOW 0x0C
|
|
#define LM90_REG_R_LOCAL_CRIT 0x20
|
|
#define LM90_REG_W_LOCAL_CRIT 0x20
|
|
#define LM90_REG_R_REMOTE_TEMPH 0x01
|
|
#define LM90_REG_R_REMOTE_TEMPL 0x10
|
|
#define LM90_REG_R_REMOTE_OFFSH 0x11
|
|
#define LM90_REG_W_REMOTE_OFFSH 0x11
|
|
#define LM90_REG_R_REMOTE_OFFSL 0x12
|
|
#define LM90_REG_W_REMOTE_OFFSL 0x12
|
|
#define LM90_REG_R_REMOTE_HIGHH 0x07
|
|
#define LM90_REG_W_REMOTE_HIGHH 0x0D
|
|
#define LM90_REG_R_REMOTE_HIGHL 0x13
|
|
#define LM90_REG_W_REMOTE_HIGHL 0x13
|
|
#define LM90_REG_R_REMOTE_LOWH 0x08
|
|
#define LM90_REG_W_REMOTE_LOWH 0x0E
|
|
#define LM90_REG_R_REMOTE_LOWL 0x14
|
|
#define LM90_REG_W_REMOTE_LOWL 0x14
|
|
#define LM90_REG_R_REMOTE_CRIT 0x19
|
|
#define LM90_REG_W_REMOTE_CRIT 0x19
|
|
#define LM90_REG_R_TCRIT_HYST 0x21
|
|
#define LM90_REG_W_TCRIT_HYST 0x21
|
|
|
|
/*
|
|
* Conversions and various macros
|
|
* For local temperatures and limits, critical limits and the hysteresis
|
|
* value, the LM90 uses signed 8-bit values with LSB = 1 degree Celsius.
|
|
* For remote temperatures and limits, it uses signed 11-bit values with
|
|
* LSB = 0.125 degree Celsius, left-justified in 16-bit registers.
|
|
*/
|
|
|
|
#define TEMP1_FROM_REG(val) ((val) * 1000)
|
|
#define TEMP1_TO_REG(val) ((val) <= -128000 ? -128 : \
|
|
(val) >= 127000 ? 127 : \
|
|
(val) < 0 ? ((val) - 500) / 1000 : \
|
|
((val) + 500) / 1000)
|
|
#define TEMP2_FROM_REG(val) ((val) / 32 * 125)
|
|
#define TEMP2_TO_REG(val) ((val) <= -128000 ? 0x8000 : \
|
|
(val) >= 127875 ? 0x7FE0 : \
|
|
(val) < 0 ? ((val) - 62) / 125 * 32 : \
|
|
((val) + 62) / 125 * 32)
|
|
#define HYST_TO_REG(val) ((val) <= 0 ? 0 : (val) >= 30500 ? 31 : \
|
|
((val) + 500) / 1000)
|
|
|
|
/*
|
|
* ADT7461 is almost identical to LM90 except that attempts to write
|
|
* values that are outside the range 0 < temp < 127 are treated as
|
|
* the boundary value.
|
|
*/
|
|
|
|
#define TEMP1_TO_REG_ADT7461(val) ((val) <= 0 ? 0 : \
|
|
(val) >= 127000 ? 127 : \
|
|
((val) + 500) / 1000)
|
|
#define TEMP2_TO_REG_ADT7461(val) ((val) <= 0 ? 0 : \
|
|
(val) >= 127750 ? 0x7FC0 : \
|
|
((val) + 125) / 250 * 64)
|
|
|
|
/*
|
|
* Functions declaration
|
|
*/
|
|
|
|
static int lm90_attach_adapter(struct i2c_adapter *adapter);
|
|
static int lm90_detect(struct i2c_adapter *adapter, int address,
|
|
int kind);
|
|
static void lm90_init_client(struct i2c_client *client);
|
|
static int lm90_detach_client(struct i2c_client *client);
|
|
static struct lm90_data *lm90_update_device(struct device *dev);
|
|
|
|
/*
|
|
* Driver data (common to all clients)
|
|
*/
|
|
|
|
static struct i2c_driver lm90_driver = {
|
|
.owner = THIS_MODULE,
|
|
.name = "lm90",
|
|
.id = I2C_DRIVERID_LM90,
|
|
.flags = I2C_DF_NOTIFY,
|
|
.attach_adapter = lm90_attach_adapter,
|
|
.detach_client = lm90_detach_client,
|
|
};
|
|
|
|
/*
|
|
* Client data (each client gets its own)
|
|
*/
|
|
|
|
struct lm90_data {
|
|
struct i2c_client client;
|
|
struct semaphore update_lock;
|
|
char valid; /* zero until following fields are valid */
|
|
unsigned long last_updated; /* in jiffies */
|
|
int kind;
|
|
|
|
/* registers values */
|
|
s8 temp8[5]; /* 0: local input
|
|
1: local low limit
|
|
2: local high limit
|
|
3: local critical limit
|
|
4: remote critical limit */
|
|
s16 temp11[3]; /* 0: remote input
|
|
1: remote low limit
|
|
2: remote high limit */
|
|
u8 temp_hyst;
|
|
u8 alarms; /* bitvector */
|
|
};
|
|
|
|
/*
|
|
* Sysfs stuff
|
|
*/
|
|
|
|
static ssize_t show_temp8(struct device *dev, struct device_attribute *devattr,
|
|
char *buf)
|
|
{
|
|
struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
|
|
struct lm90_data *data = lm90_update_device(dev);
|
|
return sprintf(buf, "%d\n", TEMP1_FROM_REG(data->temp8[attr->index]));
|
|
}
|
|
|
|
static ssize_t set_temp8(struct device *dev, struct device_attribute *devattr,
|
|
const char *buf, size_t count)
|
|
{
|
|
static const u8 reg[4] = {
|
|
LM90_REG_W_LOCAL_LOW,
|
|
LM90_REG_W_LOCAL_HIGH,
|
|
LM90_REG_W_LOCAL_CRIT,
|
|
LM90_REG_W_REMOTE_CRIT,
|
|
};
|
|
|
|
struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
|
|
struct i2c_client *client = to_i2c_client(dev);
|
|
struct lm90_data *data = i2c_get_clientdata(client);
|
|
long val = simple_strtol(buf, NULL, 10);
|
|
int nr = attr->index;
|
|
|
|
down(&data->update_lock);
|
|
if (data->kind == adt7461)
|
|
data->temp8[nr] = TEMP1_TO_REG_ADT7461(val);
|
|
else
|
|
data->temp8[nr] = TEMP1_TO_REG(val);
|
|
i2c_smbus_write_byte_data(client, reg[nr - 1], data->temp8[nr]);
|
|
up(&data->update_lock);
|
|
return count;
|
|
}
|
|
|
|
static ssize_t show_temp11(struct device *dev, struct device_attribute *devattr,
|
|
char *buf)
|
|
{
|
|
struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
|
|
struct lm90_data *data = lm90_update_device(dev);
|
|
return sprintf(buf, "%d\n", TEMP2_FROM_REG(data->temp11[attr->index]));
|
|
}
|
|
|
|
static ssize_t set_temp11(struct device *dev, struct device_attribute *devattr,
|
|
const char *buf, size_t count)
|
|
{
|
|
static const u8 reg[4] = {
|
|
LM90_REG_W_REMOTE_LOWH,
|
|
LM90_REG_W_REMOTE_LOWL,
|
|
LM90_REG_W_REMOTE_HIGHH,
|
|
LM90_REG_W_REMOTE_HIGHL,
|
|
};
|
|
|
|
struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
|
|
struct i2c_client *client = to_i2c_client(dev);
|
|
struct lm90_data *data = i2c_get_clientdata(client);
|
|
long val = simple_strtol(buf, NULL, 10);
|
|
int nr = attr->index;
|
|
|
|
down(&data->update_lock);
|
|
if (data->kind == adt7461)
|
|
data->temp11[nr] = TEMP2_TO_REG_ADT7461(val);
|
|
else
|
|
data->temp11[nr] = TEMP2_TO_REG(val);
|
|
i2c_smbus_write_byte_data(client, reg[(nr - 1) * 2],
|
|
data->temp11[nr] >> 8);
|
|
i2c_smbus_write_byte_data(client, reg[(nr - 1) * 2 + 1],
|
|
data->temp11[nr] & 0xff);
|
|
up(&data->update_lock);
|
|
return count;
|
|
}
|
|
|
|
static ssize_t show_temphyst(struct device *dev, struct device_attribute *devattr,
|
|
char *buf)
|
|
{
|
|
struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
|
|
struct lm90_data *data = lm90_update_device(dev);
|
|
return sprintf(buf, "%d\n", TEMP1_FROM_REG(data->temp8[attr->index])
|
|
- TEMP1_FROM_REG(data->temp_hyst));
|
|
}
|
|
|
|
static ssize_t set_temphyst(struct device *dev, struct device_attribute *dummy,
|
|
const char *buf, size_t count)
|
|
{
|
|
struct i2c_client *client = to_i2c_client(dev);
|
|
struct lm90_data *data = i2c_get_clientdata(client);
|
|
long val = simple_strtol(buf, NULL, 10);
|
|
long hyst;
|
|
|
|
down(&data->update_lock);
|
|
hyst = TEMP1_FROM_REG(data->temp8[3]) - val;
|
|
i2c_smbus_write_byte_data(client, LM90_REG_W_TCRIT_HYST,
|
|
HYST_TO_REG(hyst));
|
|
up(&data->update_lock);
|
|
return count;
|
|
}
|
|
|
|
static ssize_t show_alarms(struct device *dev, struct device_attribute *dummy,
|
|
char *buf)
|
|
{
|
|
struct lm90_data *data = lm90_update_device(dev);
|
|
return sprintf(buf, "%d\n", data->alarms);
|
|
}
|
|
|
|
static SENSOR_DEVICE_ATTR(temp1_input, S_IRUGO, show_temp8, NULL, 0);
|
|
static SENSOR_DEVICE_ATTR(temp2_input, S_IRUGO, show_temp11, NULL, 0);
|
|
static SENSOR_DEVICE_ATTR(temp1_min, S_IWUSR | S_IRUGO, show_temp8,
|
|
set_temp8, 1);
|
|
static SENSOR_DEVICE_ATTR(temp2_min, S_IWUSR | S_IRUGO, show_temp11,
|
|
set_temp11, 1);
|
|
static SENSOR_DEVICE_ATTR(temp1_max, S_IWUSR | S_IRUGO, show_temp8,
|
|
set_temp8, 2);
|
|
static SENSOR_DEVICE_ATTR(temp2_max, S_IWUSR | S_IRUGO, show_temp11,
|
|
set_temp11, 2);
|
|
static SENSOR_DEVICE_ATTR(temp1_crit, S_IWUSR | S_IRUGO, show_temp8,
|
|
set_temp8, 3);
|
|
static SENSOR_DEVICE_ATTR(temp2_crit, S_IWUSR | S_IRUGO, show_temp8,
|
|
set_temp8, 4);
|
|
static SENSOR_DEVICE_ATTR(temp1_crit_hyst, S_IWUSR | S_IRUGO, show_temphyst,
|
|
set_temphyst, 3);
|
|
static SENSOR_DEVICE_ATTR(temp2_crit_hyst, S_IRUGO, show_temphyst, NULL, 4);
|
|
static DEVICE_ATTR(alarms, S_IRUGO, show_alarms, NULL);
|
|
|
|
/*
|
|
* Real code
|
|
*/
|
|
|
|
static int lm90_attach_adapter(struct i2c_adapter *adapter)
|
|
{
|
|
if (!(adapter->class & I2C_CLASS_HWMON))
|
|
return 0;
|
|
return i2c_detect(adapter, &addr_data, lm90_detect);
|
|
}
|
|
|
|
/*
|
|
* The following function does more than just detection. If detection
|
|
* succeeds, it also registers the new chip.
|
|
*/
|
|
static int lm90_detect(struct i2c_adapter *adapter, int address, int kind)
|
|
{
|
|
struct i2c_client *new_client;
|
|
struct lm90_data *data;
|
|
int err = 0;
|
|
const char *name = "";
|
|
|
|
if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
|
|
goto exit;
|
|
|
|
if (!(data = kmalloc(sizeof(struct lm90_data), GFP_KERNEL))) {
|
|
err = -ENOMEM;
|
|
goto exit;
|
|
}
|
|
memset(data, 0, sizeof(struct lm90_data));
|
|
|
|
/* The common I2C client data is placed right before the
|
|
LM90-specific data. */
|
|
new_client = &data->client;
|
|
i2c_set_clientdata(new_client, data);
|
|
new_client->addr = address;
|
|
new_client->adapter = adapter;
|
|
new_client->driver = &lm90_driver;
|
|
new_client->flags = 0;
|
|
|
|
/*
|
|
* Now we do the remaining detection. A negative kind means that
|
|
* the driver was loaded with no force parameter (default), so we
|
|
* must both detect and identify the chip. A zero kind means that
|
|
* the driver was loaded with the force parameter, the detection
|
|
* step shall be skipped. A positive kind means that the driver
|
|
* was loaded with the force parameter and a given kind of chip is
|
|
* requested, so both the detection and the identification steps
|
|
* are skipped.
|
|
*/
|
|
|
|
/* Default to an LM90 if forced */
|
|
if (kind == 0)
|
|
kind = lm90;
|
|
|
|
if (kind < 0) { /* detection and identification */
|
|
u8 man_id, chip_id, reg_config1, reg_convrate;
|
|
|
|
man_id = i2c_smbus_read_byte_data(new_client,
|
|
LM90_REG_R_MAN_ID);
|
|
chip_id = i2c_smbus_read_byte_data(new_client,
|
|
LM90_REG_R_CHIP_ID);
|
|
reg_config1 = i2c_smbus_read_byte_data(new_client,
|
|
LM90_REG_R_CONFIG1);
|
|
reg_convrate = i2c_smbus_read_byte_data(new_client,
|
|
LM90_REG_R_CONVRATE);
|
|
|
|
if (man_id == 0x01) { /* National Semiconductor */
|
|
u8 reg_config2;
|
|
|
|
reg_config2 = i2c_smbus_read_byte_data(new_client,
|
|
LM90_REG_R_CONFIG2);
|
|
|
|
if ((reg_config1 & 0x2A) == 0x00
|
|
&& (reg_config2 & 0xF8) == 0x00
|
|
&& reg_convrate <= 0x09) {
|
|
if (address == 0x4C
|
|
&& (chip_id & 0xF0) == 0x20) { /* LM90 */
|
|
kind = lm90;
|
|
} else
|
|
if ((chip_id & 0xF0) == 0x30) { /* LM89/LM99 */
|
|
kind = lm99;
|
|
} else
|
|
if (address == 0x4C
|
|
&& (chip_id & 0xF0) == 0x10) { /* LM86 */
|
|
kind = lm86;
|
|
}
|
|
}
|
|
} else
|
|
if (man_id == 0x41) { /* Analog Devices */
|
|
if (address == 0x4C
|
|
&& (chip_id & 0xF0) == 0x40 /* ADM1032 */
|
|
&& (reg_config1 & 0x3F) == 0x00
|
|
&& reg_convrate <= 0x0A) {
|
|
kind = adm1032;
|
|
} else
|
|
if (address == 0x4c
|
|
&& chip_id == 0x51 /* ADT7461 */
|
|
&& (reg_config1 & 0x1F) == 0x00 /* check compat mode */
|
|
&& reg_convrate <= 0x0A) {
|
|
kind = adt7461;
|
|
}
|
|
} else
|
|
if (man_id == 0x4D) { /* Maxim */
|
|
/*
|
|
* The Maxim variants do NOT have a chip_id register.
|
|
* Reading from that address will return the last read
|
|
* value, which in our case is those of the man_id
|
|
* register. Likewise, the config1 register seems to
|
|
* lack a low nibble, so the value will be those of the
|
|
* previous read, so in our case those of the man_id
|
|
* register.
|
|
*/
|
|
if (chip_id == man_id
|
|
&& (reg_config1 & 0x1F) == (man_id & 0x0F)
|
|
&& reg_convrate <= 0x09) {
|
|
kind = max6657;
|
|
}
|
|
}
|
|
|
|
if (kind <= 0) { /* identification failed */
|
|
dev_info(&adapter->dev,
|
|
"Unsupported chip (man_id=0x%02X, "
|
|
"chip_id=0x%02X).\n", man_id, chip_id);
|
|
goto exit_free;
|
|
}
|
|
}
|
|
|
|
if (kind == lm90) {
|
|
name = "lm90";
|
|
} else if (kind == adm1032) {
|
|
name = "adm1032";
|
|
} else if (kind == lm99) {
|
|
name = "lm99";
|
|
} else if (kind == lm86) {
|
|
name = "lm86";
|
|
} else if (kind == max6657) {
|
|
name = "max6657";
|
|
} else if (kind == adt7461) {
|
|
name = "adt7461";
|
|
}
|
|
|
|
/* We can fill in the remaining client fields */
|
|
strlcpy(new_client->name, name, I2C_NAME_SIZE);
|
|
data->valid = 0;
|
|
data->kind = kind;
|
|
init_MUTEX(&data->update_lock);
|
|
|
|
/* Tell the I2C layer a new client has arrived */
|
|
if ((err = i2c_attach_client(new_client)))
|
|
goto exit_free;
|
|
|
|
/* Initialize the LM90 chip */
|
|
lm90_init_client(new_client);
|
|
|
|
/* Register sysfs hooks */
|
|
device_create_file(&new_client->dev,
|
|
&sensor_dev_attr_temp1_input.dev_attr);
|
|
device_create_file(&new_client->dev,
|
|
&sensor_dev_attr_temp2_input.dev_attr);
|
|
device_create_file(&new_client->dev,
|
|
&sensor_dev_attr_temp1_min.dev_attr);
|
|
device_create_file(&new_client->dev,
|
|
&sensor_dev_attr_temp2_min.dev_attr);
|
|
device_create_file(&new_client->dev,
|
|
&sensor_dev_attr_temp1_max.dev_attr);
|
|
device_create_file(&new_client->dev,
|
|
&sensor_dev_attr_temp2_max.dev_attr);
|
|
device_create_file(&new_client->dev,
|
|
&sensor_dev_attr_temp1_crit.dev_attr);
|
|
device_create_file(&new_client->dev,
|
|
&sensor_dev_attr_temp2_crit.dev_attr);
|
|
device_create_file(&new_client->dev,
|
|
&sensor_dev_attr_temp1_crit_hyst.dev_attr);
|
|
device_create_file(&new_client->dev,
|
|
&sensor_dev_attr_temp2_crit_hyst.dev_attr);
|
|
device_create_file(&new_client->dev, &dev_attr_alarms);
|
|
|
|
return 0;
|
|
|
|
exit_free:
|
|
kfree(data);
|
|
exit:
|
|
return err;
|
|
}
|
|
|
|
static void lm90_init_client(struct i2c_client *client)
|
|
{
|
|
u8 config;
|
|
|
|
/*
|
|
* Start the conversions.
|
|
*/
|
|
i2c_smbus_write_byte_data(client, LM90_REG_W_CONVRATE,
|
|
5); /* 2 Hz */
|
|
config = i2c_smbus_read_byte_data(client, LM90_REG_R_CONFIG1);
|
|
if (config & 0x40)
|
|
i2c_smbus_write_byte_data(client, LM90_REG_W_CONFIG1,
|
|
config & 0xBF); /* run */
|
|
}
|
|
|
|
static int lm90_detach_client(struct i2c_client *client)
|
|
{
|
|
int err;
|
|
|
|
if ((err = i2c_detach_client(client))) {
|
|
dev_err(&client->dev, "Client deregistration failed, "
|
|
"client not detached.\n");
|
|
return err;
|
|
}
|
|
|
|
kfree(i2c_get_clientdata(client));
|
|
return 0;
|
|
}
|
|
|
|
static struct lm90_data *lm90_update_device(struct device *dev)
|
|
{
|
|
struct i2c_client *client = to_i2c_client(dev);
|
|
struct lm90_data *data = i2c_get_clientdata(client);
|
|
|
|
down(&data->update_lock);
|
|
|
|
if (time_after(jiffies, data->last_updated + HZ * 2) || !data->valid) {
|
|
u8 oldh, newh;
|
|
|
|
dev_dbg(&client->dev, "Updating lm90 data.\n");
|
|
data->temp8[0] = i2c_smbus_read_byte_data(client,
|
|
LM90_REG_R_LOCAL_TEMP);
|
|
data->temp8[1] = i2c_smbus_read_byte_data(client,
|
|
LM90_REG_R_LOCAL_LOW);
|
|
data->temp8[2] = i2c_smbus_read_byte_data(client,
|
|
LM90_REG_R_LOCAL_HIGH);
|
|
data->temp8[3] = i2c_smbus_read_byte_data(client,
|
|
LM90_REG_R_LOCAL_CRIT);
|
|
data->temp8[4] = i2c_smbus_read_byte_data(client,
|
|
LM90_REG_R_REMOTE_CRIT);
|
|
data->temp_hyst = i2c_smbus_read_byte_data(client,
|
|
LM90_REG_R_TCRIT_HYST);
|
|
|
|
/*
|
|
* There is a trick here. We have to read two registers to
|
|
* have the remote sensor temperature, but we have to beware
|
|
* a conversion could occur inbetween the readings. The
|
|
* datasheet says we should either use the one-shot
|
|
* conversion register, which we don't want to do (disables
|
|
* hardware monitoring) or monitor the busy bit, which is
|
|
* impossible (we can't read the values and monitor that bit
|
|
* at the exact same time). So the solution used here is to
|
|
* read the high byte once, then the low byte, then the high
|
|
* byte again. If the new high byte matches the old one,
|
|
* then we have a valid reading. Else we have to read the low
|
|
* byte again, and now we believe we have a correct reading.
|
|
*/
|
|
oldh = i2c_smbus_read_byte_data(client,
|
|
LM90_REG_R_REMOTE_TEMPH);
|
|
data->temp11[0] = i2c_smbus_read_byte_data(client,
|
|
LM90_REG_R_REMOTE_TEMPL);
|
|
newh = i2c_smbus_read_byte_data(client,
|
|
LM90_REG_R_REMOTE_TEMPH);
|
|
if (newh != oldh) {
|
|
data->temp11[0] = i2c_smbus_read_byte_data(client,
|
|
LM90_REG_R_REMOTE_TEMPL);
|
|
#ifdef DEBUG
|
|
oldh = i2c_smbus_read_byte_data(client,
|
|
LM90_REG_R_REMOTE_TEMPH);
|
|
/* oldh is actually newer */
|
|
if (newh != oldh)
|
|
dev_warn(&client->dev, "Remote temperature may be "
|
|
"wrong.\n");
|
|
#endif
|
|
}
|
|
data->temp11[0] |= (newh << 8);
|
|
|
|
data->temp11[1] = (i2c_smbus_read_byte_data(client,
|
|
LM90_REG_R_REMOTE_LOWH) << 8) +
|
|
i2c_smbus_read_byte_data(client,
|
|
LM90_REG_R_REMOTE_LOWL);
|
|
data->temp11[2] = (i2c_smbus_read_byte_data(client,
|
|
LM90_REG_R_REMOTE_HIGHH) << 8) +
|
|
i2c_smbus_read_byte_data(client,
|
|
LM90_REG_R_REMOTE_HIGHL);
|
|
data->alarms = i2c_smbus_read_byte_data(client,
|
|
LM90_REG_R_STATUS);
|
|
|
|
data->last_updated = jiffies;
|
|
data->valid = 1;
|
|
}
|
|
|
|
up(&data->update_lock);
|
|
|
|
return data;
|
|
}
|
|
|
|
static int __init sensors_lm90_init(void)
|
|
{
|
|
return i2c_add_driver(&lm90_driver);
|
|
}
|
|
|
|
static void __exit sensors_lm90_exit(void)
|
|
{
|
|
i2c_del_driver(&lm90_driver);
|
|
}
|
|
|
|
MODULE_AUTHOR("Jean Delvare <khali@linux-fr.org>");
|
|
MODULE_DESCRIPTION("LM90/ADM1032 driver");
|
|
MODULE_LICENSE("GPL");
|
|
|
|
module_init(sensors_lm90_init);
|
|
module_exit(sensors_lm90_exit);
|