173 lines
6.3 KiB
Plaintext
173 lines
6.3 KiB
Plaintext
|
|
-------------------------------------------------------------------------
|
|
Release Notes for Linux on Intel's IXP4xx Network Processor
|
|
|
|
Maintained by Deepak Saxena <dsaxena@plexity.net>
|
|
-------------------------------------------------------------------------
|
|
|
|
1. Overview
|
|
|
|
Intel's IXP4xx network processor is a highly integrated SOC that
|
|
is targeted for network applications, though it has become popular
|
|
in industrial control and other areas due to low cost and power
|
|
consumption. The IXP4xx family currently consists of several processors
|
|
that support different network offload functions such as encryption,
|
|
routing, firewalling, etc. The IXP46x family is an updated version which
|
|
supports faster speeds, new memory and flash configurations, and more
|
|
integration such as an on-chip I2C controller.
|
|
|
|
For more information on the various versions of the CPU, see:
|
|
|
|
http://developer.intel.com/design/network/products/npfamily/ixp4xx.htm
|
|
|
|
Intel also made the IXCP1100 CPU for sometime which is an IXP4xx
|
|
stripped of much of the network intelligence.
|
|
|
|
2. Linux Support
|
|
|
|
Linux currently supports the following features on the IXP4xx chips:
|
|
|
|
- Dual serial ports
|
|
- PCI interface
|
|
- Flash access (MTD/JFFS)
|
|
- I2C through GPIO on IXP42x
|
|
- GPIO for input/output/interrupts
|
|
See arch/arm/mach-ixp4xx/include/mach/platform.h for access functions.
|
|
- Timers (watchdog, OS)
|
|
|
|
The following components of the chips are not supported by Linux and
|
|
require the use of Intel's proprietary CSR softare:
|
|
|
|
- USB device interface
|
|
- Network interfaces (HSS, Utopia, NPEs, etc)
|
|
- Network offload functionality
|
|
|
|
If you need to use any of the above, you need to download Intel's
|
|
software from:
|
|
|
|
http://developer.intel.com/design/network/products/npfamily/ixp425.htm
|
|
|
|
DO NOT POST QUESTIONS TO THE LINUX MAILING LISTS REGARDING THE PROPRIETARY
|
|
SOFTWARE.
|
|
|
|
There are several websites that provide directions/pointers on using
|
|
Intel's software:
|
|
|
|
http://sourceforge.net/projects/ixp4xx-osdg/
|
|
Open Source Developer's Guide for using uClinux and the Intel libraries
|
|
|
|
http://gatewaymaker.sourceforge.net/
|
|
Simple one page summary of building a gateway using an IXP425 and Linux
|
|
|
|
http://ixp425.sourceforge.net/
|
|
ATM device driver for IXP425 that relies on Intel's libraries
|
|
|
|
3. Known Issues/Limitations
|
|
|
|
3a. Limited inbound PCI window
|
|
|
|
The IXP4xx family allows for up to 256MB of memory but the PCI interface
|
|
can only expose 64MB of that memory to the PCI bus. This means that if
|
|
you are running with > 64MB, all PCI buffers outside of the accessible
|
|
range will be bounced using the routines in arch/arm/common/dmabounce.c.
|
|
|
|
3b. Limited outbound PCI window
|
|
|
|
IXP4xx provides two methods of accessing PCI memory space:
|
|
|
|
1) A direct mapped window from 0x48000000 to 0x4bffffff (64MB).
|
|
To access PCI via this space, we simply ioremap() the BAR
|
|
into the kernel and we can use the standard read[bwl]/write[bwl]
|
|
macros. This is the preffered method due to speed but it
|
|
limits the system to just 64MB of PCI memory. This can be
|
|
problamatic if using video cards and other memory-heavy devices.
|
|
|
|
2) If > 64MB of memory space is required, the IXP4xx can be
|
|
configured to use indirect registers to access PCI This allows
|
|
for up to 128MB (0x48000000 to 0x4fffffff) of memory on the bus.
|
|
The disadvantage of this is that every PCI access requires
|
|
three local register accesses plus a spinlock, but in some
|
|
cases the performance hit is acceptable. In addition, you cannot
|
|
mmap() PCI devices in this case due to the indirect nature
|
|
of the PCI window.
|
|
|
|
By default, the direct method is used for performance reasons. If
|
|
you need more PCI memory, enable the IXP4XX_INDIRECT_PCI config option.
|
|
|
|
3c. GPIO as Interrupts
|
|
|
|
Currently the code only handles level-sensitive GPIO interrupts
|
|
|
|
4. Supported platforms
|
|
|
|
ADI Engineering Coyote Gateway Reference Platform
|
|
http://www.adiengineering.com/productsCoyote.html
|
|
|
|
The ADI Coyote platform is reference design for those building
|
|
small residential/office gateways. One NPE is connected to a 10/100
|
|
interface, one to 4-port 10/100 switch, and the third to and ADSL
|
|
interface. In addition, it also supports to POTs interfaces connected
|
|
via SLICs. Note that those are not supported by Linux ATM. Finally,
|
|
the platform has two mini-PCI slots used for 802.11[bga] cards.
|
|
Finally, there is an IDE port hanging off the expansion bus.
|
|
|
|
Gateworks Avila Network Platform
|
|
http://www.gateworks.com/support/overview.php
|
|
|
|
The Avila platform is basically and IXDP425 with the 4 PCI slots
|
|
replaced with mini-PCI slots and a CF IDE interface hanging off
|
|
the expansion bus.
|
|
|
|
Intel IXDP425 Development Platform
|
|
http://www.intel.com/design/network/products/npfamily/ixdpg425.htm
|
|
|
|
This is Intel's standard reference platform for the IXDP425 and is
|
|
also known as the Richfield board. It contains 4 PCI slots, 16MB
|
|
of flash, two 10/100 ports and one ADSL port.
|
|
|
|
Intel IXDP465 Development Platform
|
|
http://www.intel.com/design/network/products/npfamily/ixdp465.htm
|
|
|
|
This is basically an IXDP425 with an IXP465 and 32M of flash instead
|
|
of just 16.
|
|
|
|
Intel IXDPG425 Development Platform
|
|
|
|
This is basically and ADI Coyote board with a NEC EHCI controller
|
|
added. One issue with this board is that the mini-PCI slots only
|
|
have the 3.3v line connected, so you can't use a PCI to mini-PCI
|
|
adapter with an E100 card. So to NFS root you need to use either
|
|
the CSR or a WiFi card and a ramdisk that BOOTPs and then does
|
|
a pivot_root to NFS.
|
|
|
|
Motorola PrPMC1100 Processor Mezanine Card
|
|
http://www.fountainsys.com
|
|
|
|
The PrPMC1100 is based on the IXCP1100 and is meant to plug into
|
|
and IXP2400/2800 system to act as the system controller. It simply
|
|
contains a CPU and 16MB of flash on the board and needs to be
|
|
plugged into a carrier board to function. Currently Linux only
|
|
supports the Motorola PrPMC carrier board for this platform.
|
|
|
|
5. TODO LIST
|
|
|
|
- Add support for Coyote IDE
|
|
- Add support for edge-based GPIO interrupts
|
|
- Add support for CF IDE on expansion bus
|
|
|
|
6. Thanks
|
|
|
|
The IXP4xx work has been funded by Intel Corp. and MontaVista Software, Inc.
|
|
|
|
The following people have contributed patches/comments/etc:
|
|
|
|
Lennerty Buytenhek
|
|
Lutz Jaenicke
|
|
Justin Mayfield
|
|
Robert E. Ranslam
|
|
[I know I've forgotten others, please email me to be added]
|
|
|
|
-------------------------------------------------------------------------
|
|
|
|
Last Update: 01/04/2005
|