660 lines
12 KiB
C
660 lines
12 KiB
C
/*
|
|
* linux/arch/arm/mach-footbridge/netwinder-hw.c
|
|
*
|
|
* Netwinder machine fixup
|
|
*
|
|
* Copyright (C) 1998, 1999 Russell King, Phil Blundell
|
|
*/
|
|
#include <linux/module.h>
|
|
#include <linux/ioport.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/init.h>
|
|
#include <linux/io.h>
|
|
#include <linux/spinlock.h>
|
|
|
|
#include <asm/hardware/dec21285.h>
|
|
#include <asm/leds.h>
|
|
#include <asm/mach-types.h>
|
|
#include <asm/setup.h>
|
|
|
|
#include <asm/mach/arch.h>
|
|
|
|
#include "common.h"
|
|
|
|
#define IRDA_IO_BASE 0x180
|
|
#define GP1_IO_BASE 0x338
|
|
#define GP2_IO_BASE 0x33a
|
|
|
|
|
|
#ifdef CONFIG_LEDS
|
|
#define DEFAULT_LEDS 0
|
|
#else
|
|
#define DEFAULT_LEDS GPIO_GREEN_LED
|
|
#endif
|
|
|
|
/*
|
|
* Winbond WB83977F accessibility stuff
|
|
*/
|
|
static inline void wb977_open(void)
|
|
{
|
|
outb(0x87, 0x370);
|
|
outb(0x87, 0x370);
|
|
}
|
|
|
|
static inline void wb977_close(void)
|
|
{
|
|
outb(0xaa, 0x370);
|
|
}
|
|
|
|
static inline void wb977_wb(int reg, int val)
|
|
{
|
|
outb(reg, 0x370);
|
|
outb(val, 0x371);
|
|
}
|
|
|
|
static inline void wb977_ww(int reg, int val)
|
|
{
|
|
outb(reg, 0x370);
|
|
outb(val >> 8, 0x371);
|
|
outb(reg + 1, 0x370);
|
|
outb(val & 255, 0x371);
|
|
}
|
|
|
|
#define wb977_device_select(dev) wb977_wb(0x07, dev)
|
|
#define wb977_device_disable() wb977_wb(0x30, 0x00)
|
|
#define wb977_device_enable() wb977_wb(0x30, 0x01)
|
|
|
|
/*
|
|
* This is a lock for accessing ports GP1_IO_BASE and GP2_IO_BASE
|
|
*/
|
|
DEFINE_RAW_SPINLOCK(nw_gpio_lock);
|
|
EXPORT_SYMBOL(nw_gpio_lock);
|
|
|
|
static unsigned int current_gpio_op;
|
|
static unsigned int current_gpio_io;
|
|
static unsigned int current_cpld;
|
|
|
|
void nw_gpio_modify_op(unsigned int mask, unsigned int set)
|
|
{
|
|
unsigned int new_gpio, changed;
|
|
|
|
new_gpio = (current_gpio_op & ~mask) | set;
|
|
changed = new_gpio ^ current_gpio_op;
|
|
current_gpio_op = new_gpio;
|
|
|
|
if (changed & 0xff)
|
|
outb(new_gpio, GP1_IO_BASE);
|
|
if (changed & 0xff00)
|
|
outb(new_gpio >> 8, GP2_IO_BASE);
|
|
}
|
|
EXPORT_SYMBOL(nw_gpio_modify_op);
|
|
|
|
static inline void __gpio_modify_io(int mask, int in)
|
|
{
|
|
unsigned int new_gpio, changed;
|
|
int port;
|
|
|
|
new_gpio = (current_gpio_io & ~mask) | in;
|
|
changed = new_gpio ^ current_gpio_io;
|
|
current_gpio_io = new_gpio;
|
|
|
|
changed >>= 1;
|
|
new_gpio >>= 1;
|
|
|
|
wb977_device_select(7);
|
|
|
|
for (port = 0xe1; changed && port < 0xe8; changed >>= 1) {
|
|
wb977_wb(port, new_gpio & 1);
|
|
|
|
port += 1;
|
|
new_gpio >>= 1;
|
|
}
|
|
|
|
wb977_device_select(8);
|
|
|
|
for (port = 0xe8; changed && port < 0xec; changed >>= 1) {
|
|
wb977_wb(port, new_gpio & 1);
|
|
|
|
port += 1;
|
|
new_gpio >>= 1;
|
|
}
|
|
}
|
|
|
|
void nw_gpio_modify_io(unsigned int mask, unsigned int in)
|
|
{
|
|
/* Open up the SuperIO chip */
|
|
wb977_open();
|
|
|
|
__gpio_modify_io(mask, in);
|
|
|
|
/* Close up the EFER gate */
|
|
wb977_close();
|
|
}
|
|
EXPORT_SYMBOL(nw_gpio_modify_io);
|
|
|
|
unsigned int nw_gpio_read(void)
|
|
{
|
|
return inb(GP1_IO_BASE) | inb(GP2_IO_BASE) << 8;
|
|
}
|
|
EXPORT_SYMBOL(nw_gpio_read);
|
|
|
|
/*
|
|
* Initialise the Winbond W83977F global registers
|
|
*/
|
|
static inline void wb977_init_global(void)
|
|
{
|
|
/*
|
|
* Enable R/W config registers
|
|
*/
|
|
wb977_wb(0x26, 0x40);
|
|
|
|
/*
|
|
* Power down FDC (not used)
|
|
*/
|
|
wb977_wb(0x22, 0xfe);
|
|
|
|
/*
|
|
* GP12, GP11, CIRRX, IRRXH, GP10
|
|
*/
|
|
wb977_wb(0x2a, 0xc1);
|
|
|
|
/*
|
|
* GP23, GP22, GP21, GP20, GP13
|
|
*/
|
|
wb977_wb(0x2b, 0x6b);
|
|
|
|
/*
|
|
* GP17, GP16, GP15, GP14
|
|
*/
|
|
wb977_wb(0x2c, 0x55);
|
|
}
|
|
|
|
/*
|
|
* Initialise the Winbond W83977F printer port
|
|
*/
|
|
static inline void wb977_init_printer(void)
|
|
{
|
|
wb977_device_select(1);
|
|
|
|
/*
|
|
* mode 1 == EPP
|
|
*/
|
|
wb977_wb(0xf0, 0x01);
|
|
}
|
|
|
|
/*
|
|
* Initialise the Winbond W83977F keyboard controller
|
|
*/
|
|
static inline void wb977_init_keyboard(void)
|
|
{
|
|
wb977_device_select(5);
|
|
|
|
/*
|
|
* Keyboard controller address
|
|
*/
|
|
wb977_ww(0x60, 0x0060);
|
|
wb977_ww(0x62, 0x0064);
|
|
|
|
/*
|
|
* Keyboard IRQ 1, active high, edge trigger
|
|
*/
|
|
wb977_wb(0x70, 1);
|
|
wb977_wb(0x71, 0x02);
|
|
|
|
/*
|
|
* Mouse IRQ 5, active high, edge trigger
|
|
*/
|
|
wb977_wb(0x72, 5);
|
|
wb977_wb(0x73, 0x02);
|
|
|
|
/*
|
|
* KBC 8MHz
|
|
*/
|
|
wb977_wb(0xf0, 0x40);
|
|
|
|
/*
|
|
* Enable device
|
|
*/
|
|
wb977_device_enable();
|
|
}
|
|
|
|
/*
|
|
* Initialise the Winbond W83977F Infra-Red device
|
|
*/
|
|
static inline void wb977_init_irda(void)
|
|
{
|
|
wb977_device_select(6);
|
|
|
|
/*
|
|
* IR base address
|
|
*/
|
|
wb977_ww(0x60, IRDA_IO_BASE);
|
|
|
|
/*
|
|
* IRDA IRQ 6, active high, edge trigger
|
|
*/
|
|
wb977_wb(0x70, 6);
|
|
wb977_wb(0x71, 0x02);
|
|
|
|
/*
|
|
* RX DMA - ISA DMA 0
|
|
*/
|
|
wb977_wb(0x74, 0x00);
|
|
|
|
/*
|
|
* TX DMA - Disable Tx DMA
|
|
*/
|
|
wb977_wb(0x75, 0x04);
|
|
|
|
/*
|
|
* Append CRC, Enable bank selection
|
|
*/
|
|
wb977_wb(0xf0, 0x03);
|
|
|
|
/*
|
|
* Enable device
|
|
*/
|
|
wb977_device_enable();
|
|
}
|
|
|
|
/*
|
|
* Initialise Winbond W83977F general purpose IO
|
|
*/
|
|
static inline void wb977_init_gpio(void)
|
|
{
|
|
unsigned long flags;
|
|
|
|
/*
|
|
* Set up initial I/O definitions
|
|
*/
|
|
current_gpio_io = -1;
|
|
__gpio_modify_io(-1, GPIO_DONE | GPIO_WDTIMER);
|
|
|
|
wb977_device_select(7);
|
|
|
|
/*
|
|
* Group1 base address
|
|
*/
|
|
wb977_ww(0x60, GP1_IO_BASE);
|
|
wb977_ww(0x62, 0);
|
|
wb977_ww(0x64, 0);
|
|
|
|
/*
|
|
* GP10 (Orage button) IRQ 10, active high, edge trigger
|
|
*/
|
|
wb977_wb(0x70, 10);
|
|
wb977_wb(0x71, 0x02);
|
|
|
|
/*
|
|
* GP10: Debounce filter enabled, IRQ, input
|
|
*/
|
|
wb977_wb(0xe0, 0x19);
|
|
|
|
/*
|
|
* Enable Group1
|
|
*/
|
|
wb977_device_enable();
|
|
|
|
wb977_device_select(8);
|
|
|
|
/*
|
|
* Group2 base address
|
|
*/
|
|
wb977_ww(0x60, GP2_IO_BASE);
|
|
|
|
/*
|
|
* Clear watchdog timer regs
|
|
* - timer disable
|
|
*/
|
|
wb977_wb(0xf2, 0x00);
|
|
|
|
/*
|
|
* - disable LED, no mouse nor keyboard IRQ
|
|
*/
|
|
wb977_wb(0xf3, 0x00);
|
|
|
|
/*
|
|
* - timer counting, disable power LED, disable timeouot
|
|
*/
|
|
wb977_wb(0xf4, 0x00);
|
|
|
|
/*
|
|
* Enable group2
|
|
*/
|
|
wb977_device_enable();
|
|
|
|
/*
|
|
* Set Group1/Group2 outputs
|
|
*/
|
|
raw_spin_lock_irqsave(&nw_gpio_lock, flags);
|
|
nw_gpio_modify_op(-1, GPIO_RED_LED | GPIO_FAN);
|
|
raw_spin_unlock_irqrestore(&nw_gpio_lock, flags);
|
|
}
|
|
|
|
/*
|
|
* Initialise the Winbond W83977F chip.
|
|
*/
|
|
static void __init wb977_init(void)
|
|
{
|
|
request_region(0x370, 2, "W83977AF configuration");
|
|
|
|
/*
|
|
* Open up the SuperIO chip
|
|
*/
|
|
wb977_open();
|
|
|
|
/*
|
|
* Initialise the global registers
|
|
*/
|
|
wb977_init_global();
|
|
|
|
/*
|
|
* Initialise the various devices in
|
|
* the multi-IO chip.
|
|
*/
|
|
wb977_init_printer();
|
|
wb977_init_keyboard();
|
|
wb977_init_irda();
|
|
wb977_init_gpio();
|
|
|
|
/*
|
|
* Close up the EFER gate
|
|
*/
|
|
wb977_close();
|
|
}
|
|
|
|
void nw_cpld_modify(unsigned int mask, unsigned int set)
|
|
{
|
|
int msk;
|
|
|
|
current_cpld = (current_cpld & ~mask) | set;
|
|
|
|
nw_gpio_modify_io(GPIO_DATA | GPIO_IOCLK | GPIO_IOLOAD, 0);
|
|
nw_gpio_modify_op(GPIO_IOLOAD, 0);
|
|
|
|
for (msk = 8; msk; msk >>= 1) {
|
|
int bit = current_cpld & msk;
|
|
|
|
nw_gpio_modify_op(GPIO_DATA | GPIO_IOCLK, bit ? GPIO_DATA : 0);
|
|
nw_gpio_modify_op(GPIO_IOCLK, GPIO_IOCLK);
|
|
}
|
|
|
|
nw_gpio_modify_op(GPIO_IOCLK|GPIO_DATA, 0);
|
|
nw_gpio_modify_op(GPIO_IOLOAD|GPIO_DSCLK, GPIO_IOLOAD|GPIO_DSCLK);
|
|
nw_gpio_modify_op(GPIO_IOLOAD, 0);
|
|
}
|
|
EXPORT_SYMBOL(nw_cpld_modify);
|
|
|
|
static void __init cpld_init(void)
|
|
{
|
|
unsigned long flags;
|
|
|
|
raw_spin_lock_irqsave(&nw_gpio_lock, flags);
|
|
nw_cpld_modify(-1, CPLD_UNMUTE | CPLD_7111_DISABLE);
|
|
raw_spin_unlock_irqrestore(&nw_gpio_lock, flags);
|
|
}
|
|
|
|
static unsigned char rwa_unlock[] __initdata =
|
|
{ 0x00, 0x00, 0x6a, 0xb5, 0xda, 0xed, 0xf6, 0xfb, 0x7d, 0xbe, 0xdf, 0x6f, 0x37, 0x1b,
|
|
0x0d, 0x86, 0xc3, 0x61, 0xb0, 0x58, 0x2c, 0x16, 0x8b, 0x45, 0xa2, 0xd1, 0xe8, 0x74,
|
|
0x3a, 0x9d, 0xce, 0xe7, 0x73, 0x39 };
|
|
|
|
#ifndef DEBUG
|
|
#define dprintk(x...)
|
|
#else
|
|
#define dprintk(x...) printk(x)
|
|
#endif
|
|
|
|
#define WRITE_RWA(r,v) do { outb((r), 0x279); udelay(10); outb((v), 0xa79); } while (0)
|
|
|
|
static inline void rwa010_unlock(void)
|
|
{
|
|
int i;
|
|
|
|
WRITE_RWA(2, 2);
|
|
mdelay(10);
|
|
|
|
for (i = 0; i < sizeof(rwa_unlock); i++) {
|
|
outb(rwa_unlock[i], 0x279);
|
|
udelay(10);
|
|
}
|
|
}
|
|
|
|
static inline void rwa010_read_ident(void)
|
|
{
|
|
unsigned char si[9];
|
|
int i, j;
|
|
|
|
WRITE_RWA(3, 0);
|
|
WRITE_RWA(0, 128);
|
|
|
|
outb(1, 0x279);
|
|
|
|
mdelay(1);
|
|
|
|
dprintk("Identifier: ");
|
|
for (i = 0; i < 9; i++) {
|
|
si[i] = 0;
|
|
for (j = 0; j < 8; j++) {
|
|
int bit;
|
|
udelay(250);
|
|
inb(0x203);
|
|
udelay(250);
|
|
bit = inb(0x203);
|
|
dprintk("%02X ", bit);
|
|
bit = (bit == 0xaa) ? 1 : 0;
|
|
si[i] |= bit << j;
|
|
}
|
|
dprintk("(%02X) ", si[i]);
|
|
}
|
|
dprintk("\n");
|
|
}
|
|
|
|
static inline void rwa010_global_init(void)
|
|
{
|
|
WRITE_RWA(6, 2); // Assign a card no = 2
|
|
|
|
dprintk("Card no = %d\n", inb(0x203));
|
|
|
|
/* disable the modem section of the chip */
|
|
WRITE_RWA(7, 3);
|
|
WRITE_RWA(0x30, 0);
|
|
|
|
/* disable the cdrom section of the chip */
|
|
WRITE_RWA(7, 4);
|
|
WRITE_RWA(0x30, 0);
|
|
|
|
/* disable the MPU-401 section of the chip */
|
|
WRITE_RWA(7, 2);
|
|
WRITE_RWA(0x30, 0);
|
|
}
|
|
|
|
static inline void rwa010_game_port_init(void)
|
|
{
|
|
int i;
|
|
|
|
WRITE_RWA(7, 5);
|
|
|
|
dprintk("Slider base: ");
|
|
WRITE_RWA(0x61, 1);
|
|
i = inb(0x203);
|
|
|
|
WRITE_RWA(0x60, 2);
|
|
dprintk("%02X%02X (201)\n", inb(0x203), i);
|
|
|
|
WRITE_RWA(0x30, 1);
|
|
}
|
|
|
|
static inline void rwa010_waveartist_init(int base, int irq, int dma)
|
|
{
|
|
int i;
|
|
|
|
WRITE_RWA(7, 0);
|
|
|
|
dprintk("WaveArtist base: ");
|
|
WRITE_RWA(0x61, base & 255);
|
|
i = inb(0x203);
|
|
|
|
WRITE_RWA(0x60, base >> 8);
|
|
dprintk("%02X%02X (%X),", inb(0x203), i, base);
|
|
|
|
WRITE_RWA(0x70, irq);
|
|
dprintk(" irq: %d (%d),", inb(0x203), irq);
|
|
|
|
WRITE_RWA(0x74, dma);
|
|
dprintk(" dma: %d (%d)\n", inb(0x203), dma);
|
|
|
|
WRITE_RWA(0x30, 1);
|
|
}
|
|
|
|
static inline void rwa010_soundblaster_init(int sb_base, int al_base, int irq, int dma)
|
|
{
|
|
int i;
|
|
|
|
WRITE_RWA(7, 1);
|
|
|
|
dprintk("SoundBlaster base: ");
|
|
WRITE_RWA(0x61, sb_base & 255);
|
|
i = inb(0x203);
|
|
|
|
WRITE_RWA(0x60, sb_base >> 8);
|
|
dprintk("%02X%02X (%X),", inb(0x203), i, sb_base);
|
|
|
|
dprintk(" irq: ");
|
|
WRITE_RWA(0x70, irq);
|
|
dprintk("%d (%d),", inb(0x203), irq);
|
|
|
|
dprintk(" 8-bit DMA: ");
|
|
WRITE_RWA(0x74, dma);
|
|
dprintk("%d (%d)\n", inb(0x203), dma);
|
|
|
|
dprintk("AdLib base: ");
|
|
WRITE_RWA(0x63, al_base & 255);
|
|
i = inb(0x203);
|
|
|
|
WRITE_RWA(0x62, al_base >> 8);
|
|
dprintk("%02X%02X (%X)\n", inb(0x203), i, al_base);
|
|
|
|
WRITE_RWA(0x30, 1);
|
|
}
|
|
|
|
static void rwa010_soundblaster_reset(void)
|
|
{
|
|
int i;
|
|
|
|
outb(1, 0x226);
|
|
udelay(3);
|
|
outb(0, 0x226);
|
|
|
|
for (i = 0; i < 5; i++) {
|
|
if (inb(0x22e) & 0x80)
|
|
break;
|
|
mdelay(1);
|
|
}
|
|
if (i == 5)
|
|
printk("SoundBlaster: DSP reset failed\n");
|
|
|
|
dprintk("SoundBlaster DSP reset: %02X (AA)\n", inb(0x22a));
|
|
|
|
for (i = 0; i < 5; i++) {
|
|
if ((inb(0x22c) & 0x80) == 0)
|
|
break;
|
|
mdelay(1);
|
|
}
|
|
|
|
if (i == 5)
|
|
printk("SoundBlaster: DSP not ready\n");
|
|
else {
|
|
outb(0xe1, 0x22c);
|
|
|
|
dprintk("SoundBlaster DSP id: ");
|
|
i = inb(0x22a);
|
|
udelay(1);
|
|
i |= inb(0x22a) << 8;
|
|
dprintk("%04X\n", i);
|
|
|
|
for (i = 0; i < 5; i++) {
|
|
if ((inb(0x22c) & 0x80) == 0)
|
|
break;
|
|
mdelay(1);
|
|
}
|
|
|
|
if (i == 5)
|
|
printk("SoundBlaster: could not turn speaker off\n");
|
|
|
|
outb(0xd3, 0x22c);
|
|
}
|
|
|
|
/* turn on OPL3 */
|
|
outb(5, 0x38a);
|
|
outb(1, 0x38b);
|
|
}
|
|
|
|
static void __init rwa010_init(void)
|
|
{
|
|
rwa010_unlock();
|
|
rwa010_read_ident();
|
|
rwa010_global_init();
|
|
rwa010_game_port_init();
|
|
rwa010_waveartist_init(0x250, 3, 7);
|
|
rwa010_soundblaster_init(0x220, 0x388, 3, 1);
|
|
rwa010_soundblaster_reset();
|
|
}
|
|
|
|
/*
|
|
* Initialise any other hardware after we've got the PCI bus
|
|
* initialised. We may need the PCI bus to talk to this other
|
|
* hardware.
|
|
*/
|
|
static int __init nw_hw_init(void)
|
|
{
|
|
if (machine_is_netwinder()) {
|
|
unsigned long flags;
|
|
|
|
wb977_init();
|
|
cpld_init();
|
|
rwa010_init();
|
|
|
|
raw_spin_lock_irqsave(&nw_gpio_lock, flags);
|
|
nw_gpio_modify_op(GPIO_RED_LED|GPIO_GREEN_LED, DEFAULT_LEDS);
|
|
raw_spin_unlock_irqrestore(&nw_gpio_lock, flags);
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
__initcall(nw_hw_init);
|
|
|
|
/*
|
|
* Older NeTTroms either do not provide a parameters
|
|
* page, or they don't supply correct information in
|
|
* the parameter page.
|
|
*/
|
|
static void __init
|
|
fixup_netwinder(struct tag *tags, char **cmdline, struct meminfo *mi)
|
|
{
|
|
#ifdef CONFIG_ISAPNP
|
|
extern int isapnp_disable;
|
|
|
|
/*
|
|
* We must not use the kernels ISAPnP code
|
|
* on the NetWinder - it will reset the settings
|
|
* for the WaveArtist chip and render it inoperable.
|
|
*/
|
|
isapnp_disable = 1;
|
|
#endif
|
|
}
|
|
|
|
MACHINE_START(NETWINDER, "Rebel-NetWinder")
|
|
/* Maintainer: Russell King/Rebel.com */
|
|
.atag_offset = 0x100,
|
|
.video_start = 0x000a0000,
|
|
.video_end = 0x000bffff,
|
|
.reserve_lp0 = 1,
|
|
.reserve_lp2 = 1,
|
|
.fixup = fixup_netwinder,
|
|
.map_io = footbridge_map_io,
|
|
.init_irq = footbridge_init_irq,
|
|
.timer = &isa_timer,
|
|
MACHINE_END
|