linux-stable-rt/arch/m68k/platform/68360/config.c

187 lines
4.6 KiB
C

/*
* linux/arch/m68knommu/platform/68360/config.c
*
* Copyright (c) 2000 Michael Leslie <mleslie@lineo.com>
* Copyright (C) 1993 Hamish Macdonald
* Copyright (C) 1999 D. Jeff Dionne <jeff@uclinux.org>
*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file COPYING in the main directory of this archive
* for more details.
*/
#include <stdarg.h>
#include <linux/types.h>
#include <linux/kernel.h>
#include <linux/mm.h>
#include <linux/interrupt.h>
#include <linux/irq.h>
#include <asm/setup.h>
#include <asm/system.h>
#include <asm/pgtable.h>
#include <asm/machdep.h>
#include <asm/m68360.h>
#ifdef CONFIG_UCQUICC
#include <asm/bootstd.h>
#endif
extern void m360_cpm_reset(void);
// Mask to select if the PLL prescaler is enabled.
#define MCU_PREEN ((unsigned short)(0x0001 << 13))
#if defined(CONFIG_UCQUICC)
#define OSCILLATOR (unsigned long int)33000000
#endif
unsigned long int system_clock;
extern QUICC *pquicc;
/* TODO DON"T Hard Code this */
/* calculate properly using the right PLL and prescaller */
// unsigned int system_clock = 33000000l;
extern unsigned long int system_clock; //In kernel setup.c
static irqreturn_t hw_tick(int irq, void *dummy)
{
/* Reset Timer1 */
/* TSTAT &= 0; */
pquicc->timer_ter1 = 0x0002; /* clear timer event */
return arch_timer_interrupt(irq, dummy);
}
static struct irqaction m68360_timer_irq = {
.name = "timer",
.flags = IRQF_DISABLED | IRQF_TIMER,
.handler = hw_tick,
};
void hw_timer_init(void)
{
unsigned char prescaler;
unsigned short tgcr_save;
#if 0
/* Restart mode, Enable int, 32KHz, Enable timer */
TCTL = TCTL_OM | TCTL_IRQEN | TCTL_CLKSOURCE_32KHZ | TCTL_TEN;
/* Set prescaler (Divide 32KHz by 32)*/
TPRER = 31;
/* Set compare register 32Khz / 32 / 10 = 100 */
TCMP = 10;
request_irq(IRQ_MACHSPEC | 1, timer_routine, 0, "timer", NULL);
#endif
/* General purpose quicc timers: MC68360UM p7-20 */
/* Set up timer 1 (in [1..4]) to do 100Hz */
tgcr_save = pquicc->timer_tgcr & 0xfff0;
pquicc->timer_tgcr = tgcr_save; /* stop and reset timer 1 */
/* pquicc->timer_tgcr |= 0x4444; */ /* halt timers when FREEZE (ie bdm freeze) */
prescaler = 8;
pquicc->timer_tmr1 = 0x001a | /* or=1, frr=1, iclk=01b */
(unsigned short)((prescaler - 1) << 8);
pquicc->timer_tcn1 = 0x0000; /* initial count */
/* calculate interval for 100Hz based on the _system_clock: */
pquicc->timer_trr1 = (system_clock/ prescaler) / HZ; /* reference count */
pquicc->timer_ter1 = 0x0003; /* clear timer events */
/* enable timer 1 interrupt in CIMR */
setup_irq(CPMVEC_TIMER1, &m68360_timer_irq);
/* Start timer 1: */
tgcr_save = (pquicc->timer_tgcr & 0xfff0) | 0x0001;
pquicc->timer_tgcr = tgcr_save;
}
void BSP_gettod (int *yearp, int *monp, int *dayp,
int *hourp, int *minp, int *secp)
{
}
int BSP_set_clock_mmss(unsigned long nowtime)
{
#if 0
short real_seconds = nowtime % 60, real_minutes = (nowtime / 60) % 60;
tod->second1 = real_seconds / 10;
tod->second2 = real_seconds % 10;
tod->minute1 = real_minutes / 10;
tod->minute2 = real_minutes % 10;
#endif
return 0;
}
void BSP_reset (void)
{
local_irq_disable();
asm volatile (
"moveal #_start, %a0;\n"
"moveb #0, 0xFFFFF300;\n"
"moveal 0(%a0), %sp;\n"
"moveal 4(%a0), %a0;\n"
"jmp (%a0);\n"
);
}
unsigned char *scc1_hwaddr;
static int errno;
#if defined (CONFIG_UCQUICC)
_bsc0(char *, getserialnum)
_bsc1(unsigned char *, gethwaddr, int, a)
_bsc1(char *, getbenv, char *, a)
#endif
void config_BSP(char *command, int len)
{
unsigned char *p;
m360_cpm_reset();
/* Calculate the real system clock value. */
{
unsigned int local_pllcr = (unsigned int)(pquicc->sim_pllcr);
if( local_pllcr & MCU_PREEN ) // If the prescaler is dividing by 128
{
int mf = (int)(pquicc->sim_pllcr & 0x0fff);
system_clock = (OSCILLATOR / 128) * (mf + 1);
}
else
{
int mf = (int)(pquicc->sim_pllcr & 0x0fff);
system_clock = (OSCILLATOR) * (mf + 1);
}
}
printk(KERN_INFO "\n68360 QUICC support (C) 2000 Lineo Inc.\n");
#if defined(CONFIG_UCQUICC) && 0
printk(KERN_INFO "uCquicc serial string [%s]\n",getserialnum());
p = scc1_hwaddr = gethwaddr(0);
printk(KERN_INFO "uCquicc hwaddr %.2x:%.2x:%.2x:%.2x:%.2x:%.2x\n",
p[0], p[1], p[2], p[3], p[4], p[5]);
p = getbenv("APPEND");
if (p)
strcpy(p,command);
else
command[0] = 0;
#else
scc1_hwaddr = "\00\01\02\03\04\05";
#endif
mach_gettod = BSP_gettod;
mach_reset = BSP_reset;
}