ea4bbfd004
The current ssb irq setup in ssb_mipscore_init has the problem that it configures some device on some irq without checking that the irq is not taken by an other device. For example in my case PCI host is on irq 0 and IPSEC on irq 3. The current code: - store in dev->irq that IPSEC irq is 3 + 2 - do a set_irq 0->3 on PCI host But now IPSEC irq is not routed anymore to the mips code and dev->irq is wrong. This causes a problem described in [1]. This patch tries to solve the problem by making set_irq configure the device we want to take the irq on the shared irq0. The previous example becomes: - store in dev->irq that IPSEC irq is 3 + 2 - do a set_irq 0->3 on PCI host: - irq 3 is already taken by IPSEC. do a set_irq 3->0 on IPSEC I also added some code to print the irq configuration after irq setup to allow easier debugging. And I add extra checking in ssb_mips_irq to report device without irq or device with not routed irq. [1] http://www.danm.de/files/src/bcm5365p/REPORTED_DEVICES Signed-off-by: Matthieu CASTET <castet.matthieu@free.fr> Acked-by : Michael Buesch <mb@bu3sch.de> Tested-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: Ralf Baechle <ralf@linux-mips.org> |
||
|---|---|---|
| .. | ||
| Kconfig | ||
| Makefile | ||
| b43_pci_bridge.c | ||
| driver_chipcommon.c | ||
| driver_chipcommon_pmu.c | ||
| driver_extif.c | ||
| driver_gige.c | ||
| driver_mipscore.c | ||
| driver_pcicore.c | ||
| embedded.c | ||
| main.c | ||
| pci.c | ||
| pcihost_wrapper.c | ||
| pcmcia.c | ||
| scan.c | ||
| sprom.c | ||
| ssb_private.h | ||