514 lines
15 KiB
Plaintext
514 lines
15 KiB
Plaintext
#
|
|
# Sensor device configuration
|
|
#
|
|
|
|
menu "I2C Hardware Bus support"
|
|
depends on I2C
|
|
|
|
config I2C_ALI1535
|
|
tristate "ALI 1535"
|
|
depends on I2C && PCI
|
|
help
|
|
If you say yes to this option, support will be included for the SMB
|
|
Host controller on Acer Labs Inc. (ALI) M1535 South Bridges. The SMB
|
|
controller is part of the 7101 device, which is an ACPI-compliant
|
|
Power Management Unit (PMU).
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called i2c-ali1535.
|
|
|
|
config I2C_ALI1563
|
|
tristate "ALI 1563"
|
|
depends on I2C && PCI && EXPERIMENTAL
|
|
help
|
|
If you say yes to this option, support will be included for the SMB
|
|
Host controller on Acer Labs Inc. (ALI) M1563 South Bridges. The SMB
|
|
controller is part of the 7101 device, which is an ACPI-compliant
|
|
Power Management Unit (PMU).
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called i2c-ali1563.
|
|
|
|
config I2C_ALI15X3
|
|
tristate "ALI 15x3"
|
|
depends on I2C && PCI
|
|
help
|
|
If you say yes to this option, support will be included for the
|
|
Acer Labs Inc. (ALI) M1514 and M1543 motherboard I2C interfaces.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called i2c-ali15x3.
|
|
|
|
config I2C_AMD756
|
|
tristate "AMD 756/766/768/8111 and nVidia nForce"
|
|
depends on I2C && PCI
|
|
help
|
|
If you say yes to this option, support will be included for the AMD
|
|
756/766/768 mainboard I2C interfaces. The driver also includes
|
|
support for the first (SMBus 1.0) I2C interface of the AMD 8111 and
|
|
the nVidia nForce I2C interface.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called i2c-amd756.
|
|
|
|
config I2C_AMD756_S4882
|
|
tristate "SMBus multiplexing on the Tyan S4882"
|
|
depends on I2C_AMD756 && EXPERIMENTAL
|
|
help
|
|
Enabling this option will add specific SMBus support for the Tyan
|
|
S4882 motherboard. On this 4-CPU board, the SMBus is multiplexed
|
|
over 8 different channels, where the various memory module EEPROMs
|
|
and temperature sensors live. Saying yes here will give you access
|
|
to these in addition to the trunk.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called i2c-amd756-s4882.
|
|
|
|
config I2C_AMD8111
|
|
tristate "AMD 8111"
|
|
depends on I2C && PCI
|
|
help
|
|
If you say yes to this option, support will be included for the
|
|
second (SMBus 2.0) AMD 8111 mainboard I2C interface.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called i2c-amd8111.
|
|
|
|
config I2C_AU1550
|
|
tristate "Au1550 SMBus interface"
|
|
depends on I2C && SOC_AU1550
|
|
help
|
|
If you say yes to this option, support will be included for the
|
|
Au1550 SMBus interface.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called i2c-au1550.
|
|
|
|
config I2C_ELEKTOR
|
|
tristate "Elektor ISA card"
|
|
depends on I2C && ISA && BROKEN_ON_SMP
|
|
select I2C_ALGOPCF
|
|
help
|
|
This supports the PCF8584 ISA bus I2C adapter. Say Y if you own
|
|
such an adapter.
|
|
|
|
This support is also available as a module. If so, the module
|
|
will be called i2c-elektor.
|
|
|
|
config I2C_HYDRA
|
|
tristate "CHRP Apple Hydra Mac I/O I2C interface"
|
|
depends on I2C && PCI && PPC_CHRP && EXPERIMENTAL
|
|
select I2C_ALGOBIT
|
|
help
|
|
This supports the use of the I2C interface in the Apple Hydra Mac
|
|
I/O chip on some CHRP machines (e.g. the LongTrail). Say Y if you
|
|
have such a machine.
|
|
|
|
This support is also available as a module. If so, the module
|
|
will be called i2c-hydra.
|
|
|
|
config I2C_I801
|
|
tristate "Intel 82801 (ICH)"
|
|
depends on I2C && PCI
|
|
help
|
|
If you say yes to this option, support will be included for the Intel
|
|
801 family of mainboard I2C interfaces. Specifically, the following
|
|
versions of the chipset are supported:
|
|
82801AA
|
|
82801AB
|
|
82801BA
|
|
82801CA/CAM
|
|
82801DB
|
|
82801EB/ER (ICH5/ICH5R)
|
|
6300ESB
|
|
ICH6
|
|
ICH7
|
|
ESB2
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called i2c-i801.
|
|
|
|
config I2C_I810
|
|
tristate "Intel 810/815"
|
|
depends on I2C && PCI
|
|
select I2C_ALGOBIT
|
|
help
|
|
If you say yes to this option, support will be included for the Intel
|
|
810/815 family of mainboard I2C interfaces. Specifically, the
|
|
following versions of the chipset are supported:
|
|
i810AA
|
|
i810AB
|
|
i810E
|
|
i815
|
|
i845G
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called i2c-i810.
|
|
|
|
config I2C_PXA
|
|
tristate "Intel PXA2XX I2C adapter (EXPERIMENTAL)"
|
|
depends on I2C && EXPERIMENTAL && ARCH_PXA
|
|
help
|
|
If you have devices in the PXA I2C bus, say yes to this option.
|
|
This driver can also be built as a module. If so, the module
|
|
will be called i2c-pxa.
|
|
|
|
config I2C_PXA_SLAVE
|
|
bool "Intel PXA2XX I2C Slave comms support"
|
|
depends on I2C_PXA
|
|
help
|
|
Support I2C slave mode communications on the PXA I2C bus. This
|
|
is necessary for systems where the PXA may be a target on the
|
|
I2C bus.
|
|
|
|
config I2C_PIIX4
|
|
tristate "Intel PIIX4"
|
|
depends on I2C && PCI
|
|
help
|
|
If you say yes to this option, support will be included for the Intel
|
|
PIIX4 family of mainboard I2C interfaces. Specifically, the following
|
|
versions of the chipset are supported:
|
|
Intel PIIX4
|
|
Intel 440MX
|
|
Serverworks OSB4
|
|
Serverworks CSB5
|
|
Serverworks CSB6
|
|
SMSC Victory66
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called i2c-piix4.
|
|
|
|
config I2C_IBM_IIC
|
|
tristate "IBM PPC 4xx on-chip I2C interface"
|
|
depends on IBM_OCP && I2C
|
|
help
|
|
Say Y here if you want to use IIC peripheral found on
|
|
embedded IBM PPC 4xx based systems.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called i2c-ibm_iic.
|
|
|
|
config I2C_IOP3XX
|
|
tristate "Intel IOP3xx and IXP4xx on-chip I2C interface"
|
|
depends on (ARCH_IOP3XX || ARCH_IXP4XX) && I2C
|
|
help
|
|
Say Y here if you want to use the IIC bus controller on
|
|
the Intel IOP3xx I/O Processors or IXP4xx Network Processors.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called i2c-iop3xx.
|
|
|
|
config I2C_ISA
|
|
tristate
|
|
depends on I2C
|
|
|
|
config I2C_ITE
|
|
tristate "ITE I2C Adapter"
|
|
depends on I2C && MIPS_ITE8172
|
|
select I2C_ALGOITE
|
|
help
|
|
This supports the ITE8172 I2C peripheral found on some MIPS
|
|
systems. Say Y if you have one of these. You should also say Y for
|
|
the ITE I2C driver algorithm support above.
|
|
|
|
This support is also available as a module. If so, the module
|
|
will be called i2c-ite.
|
|
|
|
config I2C_IXP4XX
|
|
tristate "IXP4xx GPIO-Based I2C Interface"
|
|
depends on I2C && ARCH_IXP4XX
|
|
select I2C_ALGOBIT
|
|
help
|
|
Say Y here if you have an Intel IXP4xx(420,421,422,425) based
|
|
system and are using GPIO lines for an I2C bus.
|
|
|
|
This support is also available as a module. If so, the module
|
|
will be called i2c-ixp4xx.
|
|
|
|
config I2C_IXP2000
|
|
tristate "IXP2000 GPIO-Based I2C Interface"
|
|
depends on I2C && ARCH_IXP2000
|
|
select I2C_ALGOBIT
|
|
help
|
|
Say Y here if you have an Intel IXP2000(2400, 2800, 2850) based
|
|
system and are using GPIO lines for an I2C bus.
|
|
|
|
This support is also available as a module. If so, the module
|
|
will be called i2c-ixp2000.
|
|
|
|
config I2C_POWERMAC
|
|
tristate "Powermac I2C interface"
|
|
depends on I2C && PPC_PMAC
|
|
default y
|
|
help
|
|
This exposes the various PowerMac i2c interfaces to the linux i2c
|
|
layer and to userland. It is used by various drivers on the powemac
|
|
platform, thus should generally be enabled.
|
|
|
|
This support is also available as a module. If so, the module
|
|
will be called i2c-powermac.
|
|
|
|
config I2C_MPC
|
|
tristate "MPC107/824x/85xx/52xx"
|
|
depends on I2C && PPC32
|
|
help
|
|
If you say yes to this option, support will be included for the
|
|
built-in I2C interface on the MPC107/Tsi107/MPC8240/MPC8245 and
|
|
MPC85xx family processors. The driver may also work on 52xx
|
|
family processors, though interrupts are known not to work.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called i2c-mpc.
|
|
|
|
config I2C_NFORCE2
|
|
tristate "Nvidia nForce2, nForce3 and nForce4"
|
|
depends on I2C && PCI
|
|
help
|
|
If you say yes to this option, support will be included for the Nvidia
|
|
nForce2, nForce3 and nForce4 families of mainboard I2C interfaces.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called i2c-nforce2.
|
|
|
|
config I2C_PARPORT
|
|
tristate "Parallel port adapter"
|
|
depends on I2C && PARPORT
|
|
select I2C_ALGOBIT
|
|
help
|
|
This supports parallel port I2C adapters such as the ones made by
|
|
Philips or Velleman, Analog Devices evaluation boards, and more.
|
|
Basically any adapter using the parallel port as an I2C bus with
|
|
no extra chipset is supported by this driver, or could be.
|
|
|
|
This driver is a replacement for (and was inspired by) an older
|
|
driver named i2c-philips-par. The new driver supports more devices,
|
|
and makes it easier to add support for new devices.
|
|
|
|
Another driver exists, named i2c-parport-light, which doesn't depend
|
|
on the parport driver. This is meant for embedded systems. Don't say
|
|
Y here if you intend to say Y or M there.
|
|
|
|
This support is also available as a module. If so, the module
|
|
will be called i2c-parport.
|
|
|
|
config I2C_PARPORT_LIGHT
|
|
tristate "Parallel port adapter (light)"
|
|
depends on I2C
|
|
select I2C_ALGOBIT
|
|
help
|
|
This supports parallel port I2C adapters such as the ones made by
|
|
Philips or Velleman, Analog Devices evaluation boards, and more.
|
|
Basically any adapter using the parallel port as an I2C bus with
|
|
no extra chipset is supported by this driver, or could be.
|
|
|
|
This driver is a light version of i2c-parport. It doesn't depend
|
|
on the parport driver, and uses direct I/O access instead. This
|
|
might be prefered on embedded systems where wasting memory for
|
|
the clean but heavy parport handling is not an option. The
|
|
drawback is a reduced portability and the impossibility to
|
|
dasiy-chain other parallel port devices.
|
|
|
|
Don't say Y here if you said Y or M to i2c-parport. Saying M to
|
|
both is possible but both modules should not be loaded at the same
|
|
time.
|
|
|
|
This support is also available as a module. If so, the module
|
|
will be called i2c-parport-light.
|
|
|
|
config I2C_PROSAVAGE
|
|
tristate "S3/VIA (Pro)Savage"
|
|
depends on I2C && PCI
|
|
select I2C_ALGOBIT
|
|
help
|
|
If you say yes to this option, support will be included for the
|
|
I2C bus and DDC bus of the S3VIA embedded Savage4 and ProSavage8
|
|
graphics processors.
|
|
chipsets supported:
|
|
S3/VIA KM266/VT8375 aka ProSavage8
|
|
S3/VIA KM133/VT8365 aka Savage4
|
|
|
|
This support is also available as a module. If so, the module
|
|
will be called i2c-prosavage.
|
|
|
|
config I2C_RPXLITE
|
|
tristate "Embedded Planet RPX Lite/Classic support"
|
|
depends on (RPXLITE || RPXCLASSIC) && I2C
|
|
select I2C_ALGO8XX
|
|
|
|
config I2C_S3C2410
|
|
tristate "S3C2410 I2C Driver"
|
|
depends on I2C && ARCH_S3C2410
|
|
help
|
|
Say Y here to include support for I2C controller in the
|
|
Samsung S3C2410 based System-on-Chip devices.
|
|
|
|
config I2C_SAVAGE4
|
|
tristate "S3 Savage 4"
|
|
depends on I2C && PCI && EXPERIMENTAL
|
|
select I2C_ALGOBIT
|
|
help
|
|
If you say yes to this option, support will be included for the
|
|
S3 Savage 4 I2C interface.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called i2c-savage4.
|
|
|
|
config I2C_SIBYTE
|
|
tristate "SiByte SMBus interface"
|
|
depends on SIBYTE_SB1xxx_SOC && I2C
|
|
help
|
|
Supports the SiByte SOC on-chip I2C interfaces (2 channels).
|
|
|
|
config SCx200_I2C
|
|
tristate "NatSemi SCx200 I2C using GPIO pins"
|
|
depends on SCx200_GPIO && I2C
|
|
select I2C_ALGOBIT
|
|
help
|
|
Enable the use of two GPIO pins of a SCx200 processor as an I2C bus.
|
|
|
|
If you don't know what to do here, say N.
|
|
|
|
This support is also available as a module. If so, the module
|
|
will be called scx200_i2c.
|
|
|
|
config SCx200_I2C_SCL
|
|
int "GPIO pin used for SCL"
|
|
depends on SCx200_I2C
|
|
default "12"
|
|
help
|
|
Enter the GPIO pin number used for the SCL signal. This value can
|
|
also be specified with a module parameter.
|
|
|
|
config SCx200_I2C_SDA
|
|
int "GPIO pin used for SDA"
|
|
depends on SCx200_I2C
|
|
default "13"
|
|
help
|
|
Enter the GPIO pin number used for the SSA signal. This value can
|
|
also be specified with a module parameter.
|
|
|
|
config SCx200_ACB
|
|
tristate "NatSemi SCx200 ACCESS.bus"
|
|
depends on I2C && PCI
|
|
help
|
|
Enable the use of the ACCESS.bus controllers of a SCx200 processor.
|
|
|
|
If you don't know what to do here, say N.
|
|
|
|
This support is also available as a module. If so, the module
|
|
will be called scx200_acb.
|
|
|
|
config I2C_SIS5595
|
|
tristate "SiS 5595"
|
|
depends on I2C && PCI
|
|
help
|
|
If you say yes to this option, support will be included for the
|
|
SiS5595 SMBus (a subset of I2C) interface.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called i2c-sis5595.
|
|
|
|
config I2C_SIS630
|
|
tristate "SiS 630/730"
|
|
depends on I2C && PCI
|
|
help
|
|
If you say yes to this option, support will be included for the
|
|
SiS630 and SiS730 SMBus (a subset of I2C) interface.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called i2c-sis630.
|
|
|
|
config I2C_SIS96X
|
|
tristate "SiS 96x"
|
|
depends on I2C && PCI
|
|
help
|
|
If you say yes to this option, support will be included for the SiS
|
|
96x SMBus (a subset of I2C) interfaces. Specifically, the following
|
|
chipsets are supported:
|
|
645/961
|
|
645DX/961
|
|
645DX/962
|
|
648/961
|
|
650/961
|
|
735
|
|
745
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called i2c-sis96x.
|
|
|
|
config I2C_STUB
|
|
tristate "I2C/SMBus Test Stub"
|
|
depends on I2C && EXPERIMENTAL && 'm'
|
|
default 'n'
|
|
help
|
|
This module may be useful to developers of SMBus client drivers,
|
|
especially for certain kinds of sensor chips.
|
|
|
|
If you do build this module, be sure to read the notes and warnings
|
|
in <file:Documentation/i2c/i2c-stub>.
|
|
|
|
If you don't know what to do here, definitely say N.
|
|
|
|
config I2C_VIA
|
|
tristate "VIA 82C586B"
|
|
depends on I2C && PCI && EXPERIMENTAL
|
|
select I2C_ALGOBIT
|
|
help
|
|
If you say yes to this option, support will be included for the VIA
|
|
82C586B I2C interface
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called i2c-via.
|
|
|
|
config I2C_VIAPRO
|
|
tristate "VIA 82C596/82C686/823x"
|
|
depends on I2C && PCI
|
|
help
|
|
If you say yes to this option, support will be included for the VIA
|
|
82C596/82C686/823x I2C interfaces. Specifically, the following
|
|
chipsets are supported:
|
|
82C596A/B
|
|
82C686A/B
|
|
8231
|
|
8233
|
|
8233A
|
|
8235
|
|
8237
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called i2c-viapro.
|
|
|
|
config I2C_VOODOO3
|
|
tristate "Voodoo 3"
|
|
depends on I2C && PCI
|
|
select I2C_ALGOBIT
|
|
help
|
|
If you say yes to this option, support will be included for the
|
|
Voodoo 3 I2C interface.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called i2c-voodoo3.
|
|
|
|
config I2C_PCA_ISA
|
|
tristate "PCA9564 on an ISA bus"
|
|
depends on I2C
|
|
select I2C_ALGOPCA
|
|
help
|
|
This driver supports ISA boards using the Philips PCA 9564
|
|
Parallel bus to I2C bus controller
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called i2c-pca-isa.
|
|
|
|
config I2C_MV64XXX
|
|
tristate "Marvell mv64xxx I2C Controller"
|
|
depends on I2C && MV64X60 && EXPERIMENTAL
|
|
help
|
|
If you say yes to this option, support will be included for the
|
|
built-in I2C interface on the Marvell 64xxx line of host bridges.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called i2c-mv64xxx.
|
|
|
|
endmenu
|