198 lines
7.8 KiB
C
198 lines
7.8 KiB
C
/*
|
|
* arch/arm/plat-omap/include/mach/fpga.h
|
|
*
|
|
* Interrupt handler for OMAP-1510 FPGA
|
|
*
|
|
* Copyright (C) 2001 RidgeRun, Inc.
|
|
* Author: Greg Lonnon <glonnon@ridgerun.com>
|
|
*
|
|
* Copyright (C) 2002 MontaVista Software, Inc.
|
|
*
|
|
* Separated FPGA interrupts from innovator1510.c and cleaned up for 2.6
|
|
* Copyright (C) 2004 Nokia Corporation by Tony Lindrgen <tony@atomide.com>
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
* published by the Free Software Foundation.
|
|
*/
|
|
|
|
#ifndef __ASM_ARCH_OMAP_FPGA_H
|
|
#define __ASM_ARCH_OMAP_FPGA_H
|
|
|
|
#if defined(CONFIG_MACH_OMAP_INNOVATOR) && defined(CONFIG_ARCH_OMAP15XX)
|
|
extern void omap1510_fpga_init_irq(void);
|
|
#else
|
|
#define omap1510_fpga_init_irq() (0)
|
|
#endif
|
|
|
|
#define fpga_read(reg) __raw_readb(reg)
|
|
#define fpga_write(val, reg) __raw_writeb(val, reg)
|
|
|
|
/*
|
|
* ---------------------------------------------------------------------------
|
|
* H2/P2 Debug board FPGA
|
|
* ---------------------------------------------------------------------------
|
|
*/
|
|
/* maps in the FPGA registers and the ETHR registers */
|
|
#define H2P2_DBG_FPGA_BASE 0xE8000000 /* VA */
|
|
#define H2P2_DBG_FPGA_SIZE SZ_4K /* SIZE */
|
|
#define H2P2_DBG_FPGA_START 0x04000000 /* PA */
|
|
|
|
#define H2P2_DBG_FPGA_ETHR_START (H2P2_DBG_FPGA_START + 0x300)
|
|
#define H2P2_DBG_FPGA_FPGA_REV (H2P2_DBG_FPGA_BASE + 0x10) /* FPGA Revision */
|
|
#define H2P2_DBG_FPGA_BOARD_REV (H2P2_DBG_FPGA_BASE + 0x12) /* Board Revision */
|
|
#define H2P2_DBG_FPGA_GPIO (H2P2_DBG_FPGA_BASE + 0x14) /* GPIO outputs */
|
|
#define H2P2_DBG_FPGA_LEDS (H2P2_DBG_FPGA_BASE + 0x16) /* LEDs outputs */
|
|
#define H2P2_DBG_FPGA_MISC_INPUTS (H2P2_DBG_FPGA_BASE + 0x18) /* Misc inputs */
|
|
#define H2P2_DBG_FPGA_LAN_STATUS (H2P2_DBG_FPGA_BASE + 0x1A) /* LAN Status line */
|
|
#define H2P2_DBG_FPGA_LAN_RESET (H2P2_DBG_FPGA_BASE + 0x1C) /* LAN Reset line */
|
|
|
|
/* NOTE: most boards don't have a static mapping for the FPGA ... */
|
|
struct h2p2_dbg_fpga {
|
|
/* offset 0x00 */
|
|
u16 smc91x[8];
|
|
/* offset 0x10 */
|
|
u16 fpga_rev;
|
|
u16 board_rev;
|
|
u16 gpio_outputs;
|
|
u16 leds;
|
|
/* offset 0x18 */
|
|
u16 misc_inputs;
|
|
u16 lan_status;
|
|
u16 lan_reset;
|
|
u16 reserved0;
|
|
/* offset 0x20 */
|
|
u16 ps2_data;
|
|
u16 ps2_ctrl;
|
|
/* plus also 4 rs232 ports ... */
|
|
};
|
|
|
|
/* LEDs definition on debug board (16 LEDs, all physically green) */
|
|
#define H2P2_DBG_FPGA_LED_GREEN (1 << 15)
|
|
#define H2P2_DBG_FPGA_LED_AMBER (1 << 14)
|
|
#define H2P2_DBG_FPGA_LED_RED (1 << 13)
|
|
#define H2P2_DBG_FPGA_LED_BLUE (1 << 12)
|
|
/* cpu0 load-meter LEDs */
|
|
#define H2P2_DBG_FPGA_LOAD_METER (1 << 0) // A bit of fun on our board ...
|
|
#define H2P2_DBG_FPGA_LOAD_METER_SIZE 11
|
|
#define H2P2_DBG_FPGA_LOAD_METER_MASK ((1 << H2P2_DBG_FPGA_LOAD_METER_SIZE) - 1)
|
|
|
|
#define H2P2_DBG_FPGA_P2_LED_TIMER (1 << 0)
|
|
#define H2P2_DBG_FPGA_P2_LED_IDLE (1 << 1)
|
|
|
|
/*
|
|
* ---------------------------------------------------------------------------
|
|
* OMAP-1510 FPGA
|
|
* ---------------------------------------------------------------------------
|
|
*/
|
|
#define OMAP1510_FPGA_BASE 0xE8000000 /* Virtual */
|
|
#define OMAP1510_FPGA_SIZE SZ_4K
|
|
#define OMAP1510_FPGA_START 0x08000000 /* Physical */
|
|
|
|
/* Revision */
|
|
#define OMAP1510_FPGA_REV_LOW (OMAP1510_FPGA_BASE + 0x0)
|
|
#define OMAP1510_FPGA_REV_HIGH (OMAP1510_FPGA_BASE + 0x1)
|
|
|
|
#define OMAP1510_FPGA_LCD_PANEL_CONTROL (OMAP1510_FPGA_BASE + 0x2)
|
|
#define OMAP1510_FPGA_LED_DIGIT (OMAP1510_FPGA_BASE + 0x3)
|
|
#define INNOVATOR_FPGA_HID_SPI (OMAP1510_FPGA_BASE + 0x4)
|
|
#define OMAP1510_FPGA_POWER (OMAP1510_FPGA_BASE + 0x5)
|
|
|
|
/* Interrupt status */
|
|
#define OMAP1510_FPGA_ISR_LO (OMAP1510_FPGA_BASE + 0x6)
|
|
#define OMAP1510_FPGA_ISR_HI (OMAP1510_FPGA_BASE + 0x7)
|
|
|
|
/* Interrupt mask */
|
|
#define OMAP1510_FPGA_IMR_LO (OMAP1510_FPGA_BASE + 0x8)
|
|
#define OMAP1510_FPGA_IMR_HI (OMAP1510_FPGA_BASE + 0x9)
|
|
|
|
/* Reset registers */
|
|
#define OMAP1510_FPGA_HOST_RESET (OMAP1510_FPGA_BASE + 0xa)
|
|
#define OMAP1510_FPGA_RST (OMAP1510_FPGA_BASE + 0xb)
|
|
|
|
#define OMAP1510_FPGA_AUDIO (OMAP1510_FPGA_BASE + 0xc)
|
|
#define OMAP1510_FPGA_DIP (OMAP1510_FPGA_BASE + 0xe)
|
|
#define OMAP1510_FPGA_FPGA_IO (OMAP1510_FPGA_BASE + 0xf)
|
|
#define OMAP1510_FPGA_UART1 (OMAP1510_FPGA_BASE + 0x14)
|
|
#define OMAP1510_FPGA_UART2 (OMAP1510_FPGA_BASE + 0x15)
|
|
#define OMAP1510_FPGA_OMAP1510_STATUS (OMAP1510_FPGA_BASE + 0x16)
|
|
#define OMAP1510_FPGA_BOARD_REV (OMAP1510_FPGA_BASE + 0x18)
|
|
#define OMAP1510P1_PPT_DATA (OMAP1510_FPGA_BASE + 0x100)
|
|
#define OMAP1510P1_PPT_STATUS (OMAP1510_FPGA_BASE + 0x101)
|
|
#define OMAP1510P1_PPT_CONTROL (OMAP1510_FPGA_BASE + 0x102)
|
|
|
|
#define OMAP1510_FPGA_TOUCHSCREEN (OMAP1510_FPGA_BASE + 0x204)
|
|
|
|
#define INNOVATOR_FPGA_INFO (OMAP1510_FPGA_BASE + 0x205)
|
|
#define INNOVATOR_FPGA_LCD_BRIGHT_LO (OMAP1510_FPGA_BASE + 0x206)
|
|
#define INNOVATOR_FPGA_LCD_BRIGHT_HI (OMAP1510_FPGA_BASE + 0x207)
|
|
#define INNOVATOR_FPGA_LED_GRN_LO (OMAP1510_FPGA_BASE + 0x208)
|
|
#define INNOVATOR_FPGA_LED_GRN_HI (OMAP1510_FPGA_BASE + 0x209)
|
|
#define INNOVATOR_FPGA_LED_RED_LO (OMAP1510_FPGA_BASE + 0x20a)
|
|
#define INNOVATOR_FPGA_LED_RED_HI (OMAP1510_FPGA_BASE + 0x20b)
|
|
#define INNOVATOR_FPGA_CAM_USB_CONTROL (OMAP1510_FPGA_BASE + 0x20c)
|
|
#define INNOVATOR_FPGA_EXP_CONTROL (OMAP1510_FPGA_BASE + 0x20d)
|
|
#define INNOVATOR_FPGA_ISR2 (OMAP1510_FPGA_BASE + 0x20e)
|
|
#define INNOVATOR_FPGA_IMR2 (OMAP1510_FPGA_BASE + 0x210)
|
|
|
|
#define OMAP1510_FPGA_ETHR_START (OMAP1510_FPGA_START + 0x300)
|
|
|
|
/*
|
|
* Power up Giga UART driver, turn on HID clock.
|
|
* Turn off BT power, since we're not using it and it
|
|
* draws power.
|
|
*/
|
|
#define OMAP1510_FPGA_RESET_VALUE 0x42
|
|
|
|
#define OMAP1510_FPGA_PCR_IF_PD0 (1 << 7)
|
|
#define OMAP1510_FPGA_PCR_COM2_EN (1 << 6)
|
|
#define OMAP1510_FPGA_PCR_COM1_EN (1 << 5)
|
|
#define OMAP1510_FPGA_PCR_EXP_PD0 (1 << 4)
|
|
#define OMAP1510_FPGA_PCR_EXP_PD1 (1 << 3)
|
|
#define OMAP1510_FPGA_PCR_48MHZ_CLK (1 << 2)
|
|
#define OMAP1510_FPGA_PCR_4MHZ_CLK (1 << 1)
|
|
#define OMAP1510_FPGA_PCR_RSRVD_BIT0 (1 << 0)
|
|
|
|
/*
|
|
* Innovator/OMAP1510 FPGA HID register bit definitions
|
|
*/
|
|
#define OMAP1510_FPGA_HID_SCLK (1<<0) /* output */
|
|
#define OMAP1510_FPGA_HID_MOSI (1<<1) /* output */
|
|
#define OMAP1510_FPGA_HID_nSS (1<<2) /* output 0/1 chip idle/select */
|
|
#define OMAP1510_FPGA_HID_nHSUS (1<<3) /* output 0/1 host active/suspended */
|
|
#define OMAP1510_FPGA_HID_MISO (1<<4) /* input */
|
|
#define OMAP1510_FPGA_HID_ATN (1<<5) /* input 0/1 chip idle/ATN */
|
|
#define OMAP1510_FPGA_HID_rsrvd (1<<6)
|
|
#define OMAP1510_FPGA_HID_RESETn (1<<7) /* output - 0/1 USAR reset/run */
|
|
|
|
/* The FPGA IRQ is cascaded through GPIO_13 */
|
|
#define OMAP1510_INT_FPGA (IH_GPIO_BASE + 13)
|
|
|
|
/* IRQ Numbers for interrupts muxed through the FPGA */
|
|
#define OMAP1510_INT_FPGA_ATN (OMAP_FPGA_IRQ_BASE + 0)
|
|
#define OMAP1510_INT_FPGA_ACK (OMAP_FPGA_IRQ_BASE + 1)
|
|
#define OMAP1510_INT_FPGA2 (OMAP_FPGA_IRQ_BASE + 2)
|
|
#define OMAP1510_INT_FPGA3 (OMAP_FPGA_IRQ_BASE + 3)
|
|
#define OMAP1510_INT_FPGA4 (OMAP_FPGA_IRQ_BASE + 4)
|
|
#define OMAP1510_INT_FPGA5 (OMAP_FPGA_IRQ_BASE + 5)
|
|
#define OMAP1510_INT_FPGA6 (OMAP_FPGA_IRQ_BASE + 6)
|
|
#define OMAP1510_INT_FPGA7 (OMAP_FPGA_IRQ_BASE + 7)
|
|
#define OMAP1510_INT_FPGA8 (OMAP_FPGA_IRQ_BASE + 8)
|
|
#define OMAP1510_INT_FPGA9 (OMAP_FPGA_IRQ_BASE + 9)
|
|
#define OMAP1510_INT_FPGA10 (OMAP_FPGA_IRQ_BASE + 10)
|
|
#define OMAP1510_INT_FPGA11 (OMAP_FPGA_IRQ_BASE + 11)
|
|
#define OMAP1510_INT_FPGA12 (OMAP_FPGA_IRQ_BASE + 12)
|
|
#define OMAP1510_INT_ETHER (OMAP_FPGA_IRQ_BASE + 13)
|
|
#define OMAP1510_INT_FPGAUART1 (OMAP_FPGA_IRQ_BASE + 14)
|
|
#define OMAP1510_INT_FPGAUART2 (OMAP_FPGA_IRQ_BASE + 15)
|
|
#define OMAP1510_INT_FPGA_TS (OMAP_FPGA_IRQ_BASE + 16)
|
|
#define OMAP1510_INT_FPGA17 (OMAP_FPGA_IRQ_BASE + 17)
|
|
#define OMAP1510_INT_FPGA_CAM (OMAP_FPGA_IRQ_BASE + 18)
|
|
#define OMAP1510_INT_FPGA_RTC_A (OMAP_FPGA_IRQ_BASE + 19)
|
|
#define OMAP1510_INT_FPGA_RTC_B (OMAP_FPGA_IRQ_BASE + 20)
|
|
#define OMAP1510_INT_FPGA_CD (OMAP_FPGA_IRQ_BASE + 21)
|
|
#define OMAP1510_INT_FPGA22 (OMAP_FPGA_IRQ_BASE + 22)
|
|
#define OMAP1510_INT_FPGA23 (OMAP_FPGA_IRQ_BASE + 23)
|
|
|
|
#endif
|