Daniel Mack 65b1aa13f2 ARM: MX3: basic support for lilly-1131 board ... This patch adds basic support for INCO startec's LILLY-1131 iMX31 based modules. The module needs a baseboard support to work which will be added in the next patch. Signed-off-by: Daniel Mack <daniel@caiaq.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>		2009-05-26 12:30:32 +02:00
..
Kconfig	ARM: MX3: basic support for lilly-1131 board	2009-05-26 12:30:32 +02:00
Makefile	ARM: MX3: basic support for lilly-1131 board	2009-05-26 12:30:32 +02:00
Makefile.boot	…
armadillo5x0.c	Atmark Armadillo 500 board support.	2009-05-19 11:24:57 +02:00
clock-imx35.c	MXC: rename mxc_map_io to architecture specific versions	2009-05-07 16:15:37 +02:00
clock.c	ARM MXC: Make-sure-ipg_per_clk-is-generated-by-ipg_clk-and-not-usb_pll	2009-05-16 16:19:02 +02:00
crm_regs.h	…
devices.c	mx31: add camera device	2009-05-07 16:21:16 +02:00
devices.h	mx31: add camera device	2009-05-07 16:21:16 +02:00
iomux.c	mx31: remove gpio_request calls from iomux code	2009-05-07 16:20:40 +02:00
mm.c	MXC: rename mxc_map_io to architecture specific versions	2009-05-07 16:15:37 +02:00
mx31ads.c	mx31: calls to gpio_request moved into platform code	2009-05-07 16:20:52 +02:00
mx31lilly.c	ARM: MX3: basic support for lilly-1131 board	2009-05-26 12:30:32 +02:00
mx31lite.c	i.MX31: Add NAND device driver for Litekit board.	2009-05-16 16:17:40 +02:00
mx31moboard-devboard.c	mx31moboard: add support for usb OTG device (v3)	2009-05-07 16:21:02 +02:00
mx31moboard-marxbot.c	mx31moboard: add support for usb OTG device (v3)	2009-05-07 16:21:02 +02:00
mx31moboard.c	mx31moboard: add support for usb OTG device (v3)	2009-05-07 16:21:02 +02:00
mx31pdk.c	i.MX31: Add support for LAN9217 on PDK debug board.	2009-05-19 21:04:41 +02:00
pcm037.c	mx31: calls to gpio_request moved into platform code	2009-05-07 16:20:52 +02:00
pcm043.c	MXC: rename mxc_map_io to architecture specific versions	2009-05-07 16:15:37 +02:00
qong.c	MXC qonq: mxc_map_io is now mx31_map_io	2009-05-07 16:20:34 +02:00