460 lines
10 KiB
Plaintext
460 lines
10 KiB
Plaintext
/*
|
|
* MPC8568E MDS Device Tree Source
|
|
*
|
|
* Copyright 2007 Freescale Semiconductor Inc.
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify it
|
|
* under the terms of the GNU General Public License as published by the
|
|
* Free Software Foundation; either version 2 of the License, or (at your
|
|
* option) any later version.
|
|
*/
|
|
|
|
|
|
/*
|
|
/memreserve/ 00000000 1000000;
|
|
*/
|
|
|
|
/ {
|
|
model = "MPC8568EMDS";
|
|
compatible = "MPC8568EMDS", "MPC85xxMDS";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
|
|
cpus {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
PowerPC,8568@0 {
|
|
device_type = "cpu";
|
|
reg = <0>;
|
|
d-cache-line-size = <20>; // 32 bytes
|
|
i-cache-line-size = <20>; // 32 bytes
|
|
d-cache-size = <8000>; // L1, 32K
|
|
i-cache-size = <8000>; // L1, 32K
|
|
timebase-frequency = <0>;
|
|
bus-frequency = <0>;
|
|
clock-frequency = <0>;
|
|
32-bit;
|
|
};
|
|
};
|
|
|
|
memory {
|
|
device_type = "memory";
|
|
reg = <00000000 10000000>;
|
|
};
|
|
|
|
bcsr@f8000000 {
|
|
device_type = "board-control";
|
|
reg = <f8000000 8000>;
|
|
};
|
|
|
|
soc8568@e0000000 {
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
#interrupt-cells = <2>;
|
|
device_type = "soc";
|
|
ranges = <0 e0000000 00100000>;
|
|
reg = <e0000000 00100000>;
|
|
bus-frequency = <0>;
|
|
|
|
memory-controller@2000 {
|
|
compatible = "fsl,8568-memory-controller";
|
|
reg = <2000 1000>;
|
|
interrupt-parent = <&mpic>;
|
|
interrupts = <12 2>;
|
|
};
|
|
|
|
l2-cache-controller@20000 {
|
|
compatible = "fsl,8568-l2-cache-controller";
|
|
reg = <20000 1000>;
|
|
cache-line-size = <20>; // 32 bytes
|
|
cache-size = <80000>; // L2, 512K
|
|
interrupt-parent = <&mpic>;
|
|
interrupts = <10 2>;
|
|
};
|
|
|
|
i2c@3000 {
|
|
device_type = "i2c";
|
|
compatible = "fsl-i2c";
|
|
reg = <3000 100>;
|
|
interrupts = <2b 2>;
|
|
interrupt-parent = <&mpic>;
|
|
dfsrr;
|
|
};
|
|
|
|
i2c@3100 {
|
|
device_type = "i2c";
|
|
compatible = "fsl-i2c";
|
|
reg = <3100 100>;
|
|
interrupts = <2b 2>;
|
|
interrupt-parent = <&mpic>;
|
|
dfsrr;
|
|
};
|
|
|
|
mdio@24520 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
device_type = "mdio";
|
|
compatible = "gianfar";
|
|
reg = <24520 20>;
|
|
phy0: ethernet-phy@0 {
|
|
interrupt-parent = <&mpic>;
|
|
interrupts = <1 1>;
|
|
reg = <0>;
|
|
device_type = "ethernet-phy";
|
|
};
|
|
phy1: ethernet-phy@1 {
|
|
interrupt-parent = <&mpic>;
|
|
interrupts = <2 1>;
|
|
reg = <1>;
|
|
device_type = "ethernet-phy";
|
|
};
|
|
phy2: ethernet-phy@2 {
|
|
interrupt-parent = <&mpic>;
|
|
interrupts = <1 1>;
|
|
reg = <2>;
|
|
device_type = "ethernet-phy";
|
|
};
|
|
phy3: ethernet-phy@3 {
|
|
interrupt-parent = <&mpic>;
|
|
interrupts = <2 1>;
|
|
reg = <3>;
|
|
device_type = "ethernet-phy";
|
|
};
|
|
};
|
|
|
|
ethernet@24000 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
device_type = "network";
|
|
model = "eTSEC";
|
|
compatible = "gianfar";
|
|
reg = <24000 1000>;
|
|
/*
|
|
* mac-address is deprecated and will be removed
|
|
* in 2.6.25. Only recent versions of
|
|
* U-Boot support local-mac-address, however.
|
|
*/
|
|
mac-address = [ 00 00 00 00 00 00 ];
|
|
local-mac-address = [ 00 00 00 00 00 00 ];
|
|
interrupts = <1d 2 1e 2 22 2>;
|
|
interrupt-parent = <&mpic>;
|
|
phy-handle = <&phy2>;
|
|
};
|
|
|
|
ethernet@25000 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
device_type = "network";
|
|
model = "eTSEC";
|
|
compatible = "gianfar";
|
|
reg = <25000 1000>;
|
|
/*
|
|
* mac-address is deprecated and will be removed
|
|
* in 2.6.25. Only recent versions of
|
|
* U-Boot support local-mac-address, however.
|
|
*/
|
|
mac-address = [ 00 00 00 00 00 00 ];
|
|
local-mac-address = [ 00 00 00 00 00 00 ];
|
|
interrupts = <23 2 24 2 28 2>;
|
|
interrupt-parent = <&mpic>;
|
|
phy-handle = <&phy3>;
|
|
};
|
|
|
|
serial@4500 {
|
|
device_type = "serial";
|
|
compatible = "ns16550";
|
|
reg = <4500 100>;
|
|
clock-frequency = <0>;
|
|
interrupts = <2a 2>;
|
|
interrupt-parent = <&mpic>;
|
|
};
|
|
|
|
global-utilities@e0000 { //global utilities block
|
|
compatible = "fsl,mpc8548-guts";
|
|
reg = <e0000 1000>;
|
|
fsl,has-rstcr;
|
|
};
|
|
|
|
pci@8000 {
|
|
interrupt-map-mask = <f800 0 0 7>;
|
|
interrupt-map = <
|
|
/* IDSEL 0x12 AD18 */
|
|
9000 0 0 1 &mpic 5 1
|
|
9000 0 0 2 &mpic 6 1
|
|
9000 0 0 3 &mpic 7 1
|
|
9000 0 0 4 &mpic 4 1
|
|
|
|
/* IDSEL 0x13 AD19 */
|
|
9800 0 0 1 &mpic 6 1
|
|
9800 0 0 2 &mpic 7 1
|
|
9800 0 0 3 &mpic 4 1
|
|
9800 0 0 4 &mpic 5 1>;
|
|
|
|
interrupt-parent = <&mpic>;
|
|
interrupts = <18 2>;
|
|
bus-range = <0 ff>;
|
|
ranges = <02000000 0 80000000 80000000 0 20000000
|
|
01000000 0 00000000 e2000000 0 00800000>;
|
|
clock-frequency = <3f940aa>;
|
|
#interrupt-cells = <1>;
|
|
#size-cells = <2>;
|
|
#address-cells = <3>;
|
|
reg = <8000 1000>;
|
|
compatible = "fsl,mpc8540-pci";
|
|
device_type = "pci";
|
|
};
|
|
|
|
/* PCI Express */
|
|
pcie@a000 {
|
|
interrupt-map-mask = <f800 0 0 7>;
|
|
interrupt-map = <
|
|
|
|
/* IDSEL 0x0 (PEX) */
|
|
00000 0 0 1 &mpic 0 1
|
|
00000 0 0 2 &mpic 1 1
|
|
00000 0 0 3 &mpic 2 1
|
|
00000 0 0 4 &mpic 3 1>;
|
|
|
|
interrupt-parent = <&mpic>;
|
|
interrupts = <1a 2>;
|
|
bus-range = <0 ff>;
|
|
ranges = <02000000 0 a0000000 a0000000 0 20000000
|
|
01000000 0 00000000 e3000000 0 08000000>;
|
|
clock-frequency = <1fca055>;
|
|
#interrupt-cells = <1>;
|
|
#size-cells = <2>;
|
|
#address-cells = <3>;
|
|
reg = <a000 1000>;
|
|
compatible = "fsl,mpc8548-pcie";
|
|
device_type = "pci";
|
|
};
|
|
|
|
serial@4600 {
|
|
device_type = "serial";
|
|
compatible = "ns16550";
|
|
reg = <4600 100>;
|
|
clock-frequency = <0>;
|
|
interrupts = <2a 2>;
|
|
interrupt-parent = <&mpic>;
|
|
};
|
|
|
|
crypto@30000 {
|
|
device_type = "crypto";
|
|
model = "SEC2";
|
|
compatible = "talitos";
|
|
reg = <30000 f000>;
|
|
interrupts = <2d 2>;
|
|
interrupt-parent = <&mpic>;
|
|
num-channels = <4>;
|
|
channel-fifo-len = <18>;
|
|
exec-units-mask = <000000fe>;
|
|
descriptor-types-mask = <012b0ebf>;
|
|
};
|
|
|
|
mpic: pic@40000 {
|
|
clock-frequency = <0>;
|
|
interrupt-controller;
|
|
#address-cells = <0>;
|
|
#interrupt-cells = <2>;
|
|
reg = <40000 40000>;
|
|
built-in;
|
|
compatible = "chrp,open-pic";
|
|
device_type = "open-pic";
|
|
big-endian;
|
|
};
|
|
par_io@e0100 {
|
|
reg = <e0100 100>;
|
|
device_type = "par_io";
|
|
num-ports = <7>;
|
|
|
|
pio1: ucc_pin@01 {
|
|
pio-map = <
|
|
/* port pin dir open_drain assignment has_irq */
|
|
4 0a 1 0 2 0 /* TxD0 */
|
|
4 09 1 0 2 0 /* TxD1 */
|
|
4 08 1 0 2 0 /* TxD2 */
|
|
4 07 1 0 2 0 /* TxD3 */
|
|
4 17 1 0 2 0 /* TxD4 */
|
|
4 16 1 0 2 0 /* TxD5 */
|
|
4 15 1 0 2 0 /* TxD6 */
|
|
4 14 1 0 2 0 /* TxD7 */
|
|
4 0f 2 0 2 0 /* RxD0 */
|
|
4 0e 2 0 2 0 /* RxD1 */
|
|
4 0d 2 0 2 0 /* RxD2 */
|
|
4 0c 2 0 2 0 /* RxD3 */
|
|
4 1d 2 0 2 0 /* RxD4 */
|
|
4 1c 2 0 2 0 /* RxD5 */
|
|
4 1b 2 0 2 0 /* RxD6 */
|
|
4 1a 2 0 2 0 /* RxD7 */
|
|
4 0b 1 0 2 0 /* TX_EN */
|
|
4 18 1 0 2 0 /* TX_ER */
|
|
4 0f 2 0 2 0 /* RX_DV */
|
|
4 1e 2 0 2 0 /* RX_ER */
|
|
4 11 2 0 2 0 /* RX_CLK */
|
|
4 13 1 0 2 0 /* GTX_CLK */
|
|
1 1f 2 0 3 0>; /* GTX125 */
|
|
};
|
|
pio2: ucc_pin@02 {
|
|
pio-map = <
|
|
/* port pin dir open_drain assignment has_irq */
|
|
5 0a 1 0 2 0 /* TxD0 */
|
|
5 09 1 0 2 0 /* TxD1 */
|
|
5 08 1 0 2 0 /* TxD2 */
|
|
5 07 1 0 2 0 /* TxD3 */
|
|
5 17 1 0 2 0 /* TxD4 */
|
|
5 16 1 0 2 0 /* TxD5 */
|
|
5 15 1 0 2 0 /* TxD6 */
|
|
5 14 1 0 2 0 /* TxD7 */
|
|
5 0f 2 0 2 0 /* RxD0 */
|
|
5 0e 2 0 2 0 /* RxD1 */
|
|
5 0d 2 0 2 0 /* RxD2 */
|
|
5 0c 2 0 2 0 /* RxD3 */
|
|
5 1d 2 0 2 0 /* RxD4 */
|
|
5 1c 2 0 2 0 /* RxD5 */
|
|
5 1b 2 0 2 0 /* RxD6 */
|
|
5 1a 2 0 2 0 /* RxD7 */
|
|
5 0b 1 0 2 0 /* TX_EN */
|
|
5 18 1 0 2 0 /* TX_ER */
|
|
5 10 2 0 2 0 /* RX_DV */
|
|
5 1e 2 0 2 0 /* RX_ER */
|
|
5 11 2 0 2 0 /* RX_CLK */
|
|
5 13 1 0 2 0 /* GTX_CLK */
|
|
1 1f 2 0 3 0 /* GTX125 */
|
|
4 06 3 0 2 0 /* MDIO */
|
|
4 05 1 0 2 0>; /* MDC */
|
|
};
|
|
};
|
|
};
|
|
|
|
qe@e0080000 {
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
device_type = "qe";
|
|
model = "QE";
|
|
ranges = <0 e0080000 00040000>;
|
|
reg = <e0080000 480>;
|
|
brg-frequency = <0>;
|
|
bus-frequency = <179A7B00>;
|
|
|
|
muram@10000 {
|
|
device_type = "muram";
|
|
ranges = <0 00010000 0000c000>;
|
|
|
|
data-only@0{
|
|
reg = <0 c000>;
|
|
};
|
|
};
|
|
|
|
spi@4c0 {
|
|
device_type = "spi";
|
|
compatible = "fsl_spi";
|
|
reg = <4c0 40>;
|
|
interrupts = <2>;
|
|
interrupt-parent = <&qeic>;
|
|
mode = "cpu";
|
|
};
|
|
|
|
spi@500 {
|
|
device_type = "spi";
|
|
compatible = "fsl_spi";
|
|
reg = <500 40>;
|
|
interrupts = <1>;
|
|
interrupt-parent = <&qeic>;
|
|
mode = "cpu";
|
|
};
|
|
|
|
ucc@2000 {
|
|
device_type = "network";
|
|
compatible = "ucc_geth";
|
|
model = "UCC";
|
|
device-id = <1>;
|
|
reg = <2000 200>;
|
|
interrupts = <20>;
|
|
interrupt-parent = <&qeic>;
|
|
/*
|
|
* mac-address is deprecated and will be removed
|
|
* in 2.6.25. Only recent versions of
|
|
* U-Boot support local-mac-address, however.
|
|
*/
|
|
mac-address = [ 00 00 00 00 00 00 ];
|
|
local-mac-address = [ 00 00 00 00 00 00 ];
|
|
rx-clock = <0>;
|
|
tx-clock = <19>;
|
|
phy-handle = <&qe_phy0>;
|
|
phy-connection-type = "gmii";
|
|
pio-handle = <&pio1>;
|
|
};
|
|
|
|
ucc@3000 {
|
|
device_type = "network";
|
|
compatible = "ucc_geth";
|
|
model = "UCC";
|
|
device-id = <2>;
|
|
reg = <3000 200>;
|
|
interrupts = <21>;
|
|
interrupt-parent = <&qeic>;
|
|
/*
|
|
* mac-address is deprecated and will be removed
|
|
* in 2.6.25. Only recent versions of
|
|
* U-Boot support local-mac-address, however.
|
|
*/
|
|
mac-address = [ 00 00 00 00 00 00 ];
|
|
local-mac-address = [ 00 00 00 00 00 00 ];
|
|
rx-clock = <0>;
|
|
tx-clock = <14>;
|
|
phy-handle = <&qe_phy1>;
|
|
phy-connection-type = "gmii";
|
|
pio-handle = <&pio2>;
|
|
};
|
|
|
|
mdio@2120 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
reg = <2120 18>;
|
|
device_type = "mdio";
|
|
compatible = "ucc_geth_phy";
|
|
|
|
/* These are the same PHYs as on
|
|
* gianfar's MDIO bus */
|
|
qe_phy0: ethernet-phy@00 {
|
|
interrupt-parent = <&mpic>;
|
|
interrupts = <1 1>;
|
|
reg = <0>;
|
|
device_type = "ethernet-phy";
|
|
};
|
|
qe_phy1: ethernet-phy@01 {
|
|
interrupt-parent = <&mpic>;
|
|
interrupts = <2 1>;
|
|
reg = <1>;
|
|
device_type = "ethernet-phy";
|
|
};
|
|
qe_phy2: ethernet-phy@02 {
|
|
interrupt-parent = <&mpic>;
|
|
interrupts = <1 1>;
|
|
reg = <2>;
|
|
device_type = "ethernet-phy";
|
|
};
|
|
qe_phy3: ethernet-phy@03 {
|
|
interrupt-parent = <&mpic>;
|
|
interrupts = <2 1>;
|
|
reg = <3>;
|
|
device_type = "ethernet-phy";
|
|
};
|
|
};
|
|
|
|
qeic: qeic@80 {
|
|
interrupt-controller;
|
|
device_type = "qeic";
|
|
#address-cells = <0>;
|
|
#interrupt-cells = <1>;
|
|
reg = <80 80>;
|
|
built-in;
|
|
big-endian;
|
|
interrupts = <2e 2 2e 2>; //high:30 low:30
|
|
interrupt-parent = <&mpic>;
|
|
};
|
|
|
|
};
|
|
};
|