203 lines
6.5 KiB
C
203 lines
6.5 KiB
C
/*
|
|
* include/asm-v850/rte_me2_cb.h -- Midas labs RTE-V850E/ME2-CB board
|
|
*
|
|
* Copyright (C) 2001,02,03 NEC Corporation
|
|
* Copyright (C) 2001,02,03 Miles Bader <miles@gnu.org>
|
|
*
|
|
* This file is subject to the terms and conditions of the GNU General
|
|
* Public License. See the file COPYING in the main directory of this
|
|
* archive for more details.
|
|
*
|
|
* Written by Miles Bader <miles@gnu.org>
|
|
*/
|
|
|
|
#ifndef __V850_RTE_ME2_CB_H__
|
|
#define __V850_RTE_ME2_CB_H__
|
|
|
|
#include <asm/rte_cb.h> /* Common defs for Midas RTE-CB boards. */
|
|
|
|
|
|
#define PLATFORM "rte-v850e/me2-cb"
|
|
#define PLATFORM_LONG "Midas lab RTE-V850E/ME2-CB"
|
|
|
|
#define CPU_CLOCK_FREQ 150000000 /* 150MHz */
|
|
#define FIXED_BOGOMIPS 50
|
|
|
|
/* 32MB of onbard SDRAM. */
|
|
#define SDRAM_ADDR 0x00800000
|
|
#define SDRAM_SIZE 0x02000000 /* 32MB */
|
|
|
|
|
|
/* CPU addresses of GBUS memory spaces. */
|
|
#define GCS0_ADDR 0x04000000 /* GCS0 - Common SRAM (2MB) */
|
|
#define GCS0_SIZE 0x00800000 /* 8MB */
|
|
#define GCS1_ADDR 0x04800000 /* GCS1 - Flash ROM (8MB) */
|
|
#define GCS1_SIZE 0x00800000 /* 8MB */
|
|
#define GCS2_ADDR 0x07000000 /* GCS2 - I/O registers */
|
|
#define GCS2_SIZE 0x00800000 /* 8MB */
|
|
#define GCS5_ADDR 0x08000000 /* GCS5 - PCI bus space */
|
|
#define GCS5_SIZE 0x02000000 /* 32MB */
|
|
#define GCS6_ADDR 0x07800000 /* GCS6 - PCI control registers */
|
|
#define GCS6_SIZE 0x00800000 /* 8MB */
|
|
|
|
|
|
/* For <asm/page.h> */
|
|
#define PAGE_OFFSET SDRAM_ADDR
|
|
|
|
|
|
#ifdef CONFIG_ROM_KERNEL
|
|
/* Kernel is in ROM, starting at address 0. */
|
|
|
|
#define INTV_BASE 0
|
|
#define ROOT_FS_IMAGE_RW 0
|
|
|
|
#else /* !CONFIG_ROM_KERNEL */
|
|
/* Using RAM-kernel. Assume some sort of boot-loader got us loaded at
|
|
address 0. */
|
|
|
|
#define INTV_BASE 0
|
|
#define ROOT_FS_IMAGE_RW 1
|
|
|
|
#endif /* CONFIG_ROM_KERNEL */
|
|
|
|
|
|
/* Some misc. on-board devices. */
|
|
|
|
/* Seven-segment LED display (four digits). */
|
|
#define LED_ADDR(n) (0x0FE02000 + (n))
|
|
#define LED(n) (*(volatile unsigned char *)LED_ADDR(n))
|
|
#define LED_NUM_DIGITS 4
|
|
|
|
|
|
/* On-board PIC. */
|
|
|
|
#define CB_PIC_BASE_ADDR 0x0FE04000
|
|
|
|
#define CB_PIC_INT0M_ADDR (CB_PIC_BASE_ADDR + 0x00)
|
|
#define CB_PIC_INT0M (*(volatile u16 *)CB_PIC_INT0M_ADDR)
|
|
#define CB_PIC_INT1M_ADDR (CB_PIC_BASE_ADDR + 0x10)
|
|
#define CB_PIC_INT1M (*(volatile u16 *)CB_PIC_INT1M_ADDR)
|
|
#define CB_PIC_INTR_ADDR (CB_PIC_BASE_ADDR + 0x20)
|
|
#define CB_PIC_INTR (*(volatile u16 *)CB_PIC_INTR_ADDR)
|
|
#define CB_PIC_INTEN_ADDR (CB_PIC_BASE_ADDR + 0x30)
|
|
#define CB_PIC_INTEN (*(volatile u16 *)CB_PIC_INTEN_ADDR)
|
|
|
|
#define CB_PIC_INT0EN 0x0001
|
|
#define CB_PIC_INT1EN 0x0002
|
|
#define CB_PIC_INT0SEL 0x0080
|
|
|
|
/* The PIC interrupts themselves. */
|
|
#define CB_PIC_BASE_IRQ NUM_CPU_IRQS
|
|
#define IRQ_CB_PIC_NUM 10
|
|
|
|
/* Some specific CB_PIC interrupts. */
|
|
#define IRQ_CB_EXTTM0 (CB_PIC_BASE_IRQ + 0)
|
|
#define IRQ_CB_EXTSIO (CB_PIC_BASE_IRQ + 1)
|
|
#define IRQ_CB_TOVER (CB_PIC_BASE_IRQ + 2)
|
|
#define IRQ_CB_GINT0 (CB_PIC_BASE_IRQ + 3)
|
|
#define IRQ_CB_USB (CB_PIC_BASE_IRQ + 4)
|
|
#define IRQ_CB_LANC (CB_PIC_BASE_IRQ + 5)
|
|
#define IRQ_CB_USB_VBUS_ON (CB_PIC_BASE_IRQ + 6)
|
|
#define IRQ_CB_USB_VBUS_OFF (CB_PIC_BASE_IRQ + 7)
|
|
#define IRQ_CB_EXTTM1 (CB_PIC_BASE_IRQ + 8)
|
|
#define IRQ_CB_EXTTM2 (CB_PIC_BASE_IRQ + 9)
|
|
|
|
/* The GBUS GINT1 - GINT3 (note, not GINT0!) interrupts are connected to
|
|
the INTP65 - INTP67 pins on the CPU. These are shared among the GBUS
|
|
interrupts. */
|
|
#define IRQ_GINT(n) IRQ_INTP((n) + 9) /* 0 is unused! */
|
|
#define IRQ_GINT_NUM 4 /* 0 is unused! */
|
|
|
|
/* The shared interrupt line from the PIC is connected to CPU pin INTP23. */
|
|
#define IRQ_CB_PIC IRQ_INTP(4) /* P23 */
|
|
|
|
/* Used by <asm/rte_cb.h> to derive NUM_MACH_IRQS. */
|
|
#define NUM_RTE_CB_IRQS (NUM_CPU_IRQS + IRQ_CB_PIC_NUM)
|
|
|
|
|
|
#ifndef __ASSEMBLY__
|
|
struct cb_pic_irq_init {
|
|
const char *name; /* name of interrupt type */
|
|
|
|
/* Range of kernel irq numbers for this type:
|
|
BASE, BASE+INTERVAL, ..., BASE+INTERVAL*NUM */
|
|
unsigned base, num, interval;
|
|
|
|
unsigned priority; /* interrupt priority to assign */
|
|
};
|
|
struct hw_interrupt_type; /* fwd decl */
|
|
|
|
/* Enable interrupt handling for interrupt IRQ. */
|
|
extern void cb_pic_enable_irq (unsigned irq);
|
|
/* Disable interrupt handling for interrupt IRQ. Note that any interrupts
|
|
received while disabled will be delivered once the interrupt is enabled
|
|
again, unless they are explicitly cleared using `cb_pic_clear_pending_irq'. */
|
|
extern void cb_pic_disable_irq (unsigned irq);
|
|
/* Initialize HW_IRQ_TYPES for PIC irqs described in array INITS (which is
|
|
terminated by an entry with the name field == 0). */
|
|
extern void cb_pic_init_irq_types (struct cb_pic_irq_init *inits,
|
|
struct hw_interrupt_type *hw_irq_types);
|
|
/* Initialize PIC interrupts. */
|
|
extern void cb_pic_init_irqs (void);
|
|
#endif /* __ASSEMBLY__ */
|
|
|
|
|
|
/* TL16C550C on board UART see also asm/serial.h */
|
|
#define CB_UART_BASE 0x0FE08000
|
|
#define CB_UART_REG_GAP 0x10
|
|
#define CB_UART_CLOCK 0x16000000
|
|
|
|
/* CompactFlash setting */
|
|
#define CB_CF_BASE 0x0FE0C000
|
|
#define CB_CF_CCR_ADDR (CB_CF_BASE+0x200)
|
|
#define CB_CF_CCR (*(volatile u8 *)CB_CF_CCR_ADDR)
|
|
#define CB_CF_REG0_ADDR (CB_CF_BASE+0x1000)
|
|
#define CB_CF_REG0 (*(volatile u16 *)CB_CF_REG0_ADDR)
|
|
#define CB_CF_STS0_ADDR (CB_CF_BASE+0x1004)
|
|
#define CB_CF_STS0 (*(volatile u16 *)CB_CF_STS0_ADDR)
|
|
#define CB_PCATA_BASE (CB_CF_BASE+0x800)
|
|
#define CB_IDE_BASE (CB_CF_BASE+0x9F0)
|
|
#define CB_IDE_CTRL (CB_CF_BASE+0xBF6)
|
|
#define CB_IDE_REG_OFFS 0x1
|
|
|
|
|
|
/* SMSC LAN91C111 setting */
|
|
#if defined(CONFIG_SMC91111)
|
|
#define CB_LANC_BASE 0x0FE10300
|
|
#define CONFIG_SMC16BITONLY
|
|
#define ETH0_ADDR CB_LANC_BASE
|
|
#define ETH0_IRQ IRQ_CB_LANC
|
|
#endif /* CONFIG_SMC16BITONLY */
|
|
|
|
|
|
#undef V850E_UART_PRE_CONFIGURE
|
|
#define V850E_UART_PRE_CONFIGURE rte_me2_cb_uart_pre_configure
|
|
#ifndef __ASSEMBLY__
|
|
extern void rte_me2_cb_uart_pre_configure (unsigned chan,
|
|
unsigned cflags, unsigned baud);
|
|
#endif /* __ASSEMBLY__ */
|
|
|
|
/* This board supports RTS/CTS for the on-chip UART, but only for channel 0. */
|
|
|
|
/* CTS for UART channel 0 is pin P22 (bit 2 of port 2). */
|
|
#define V850E_UART_CTS(chan) ((chan) == 0 ? !(ME2_PORT2_IO & 0x4) : 1)
|
|
/* RTS for UART channel 0 is pin P21 (bit 1 of port 2). */
|
|
#define V850E_UART_SET_RTS(chan, val) \
|
|
do { \
|
|
if (chan == 0) { \
|
|
unsigned old = ME2_PORT2_IO; \
|
|
if (val) \
|
|
ME2_PORT2_IO = old & ~0x2; \
|
|
else \
|
|
ME2_PORT2_IO = old | 0x2; \
|
|
} \
|
|
} while (0)
|
|
|
|
|
|
#ifndef __ASSEMBLY__
|
|
extern void rte_me2_cb_init_irqs (void);
|
|
#endif /* !__ASSEMBLY__ */
|
|
|
|
|
|
#endif /* __V850_RTE_ME2_CB_H__ */
|