linux-stable-rt/drivers/spi
Bryan Wu 092e1fdaf3 Blackfin SPI driver: reconfigure speed_hz and bits_per_word in each spi transfer
- reconfigure SPI baud from speed_hz of each spi transfer
 - according to spi_transfer.bits_per_word to reprogram register and setup
   correct SPI operation handlers

Signed-off-by: Bryan Wu <bryan.wu@analog.com>
Cc: David Brownell <david-b@pacbell.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-12-05 09:21:20 -08:00
..
Kconfig Blackfin arch: punt CONFIG_BFIN -- we already have CONFIG_BLACKFIN 2007-11-23 14:28:44 +08:00
Makefile
at25.c spi: at25 driver is for EEPROM not FLASH 2007-12-05 09:21:18 -08:00
atmel_spi.c atmel_spi: label GPIOs better 2007-11-29 09:24:51 -08:00
atmel_spi.h
au1550_spi.c
mpc52xx_psc_spi.c
omap2_mcspi.c
omap_uwire.c
pxa2xx_spi.c
spi.c spi: simplify spi_sync() calling convention 2007-12-05 09:21:18 -08:00
spi_bfin5xx.c Blackfin SPI driver: reconfigure speed_hz and bits_per_word in each spi transfer 2007-12-05 09:21:20 -08:00
spi_bitbang.c
spi_butterfly.c
spi_imx.c
spi_lm70llp.c
spi_mpc83xx.c
spi_s3c24xx.c
spi_s3c24xx_gpio.c spi: S3C2410: add bus number to SPI GPIO driver 2007-11-29 09:24:52 -08:00
spi_txx9.c
spidev.c
tle62x0.c tle62x0 driver stops ignoring read errors 2007-11-14 18:45:42 -08:00
xilinx_spi.c