456 lines
10 KiB
ArmAsm
456 lines
10 KiB
ArmAsm
.text
|
|
#include <linux/linkage.h>
|
|
#include <asm/segment.h>
|
|
#include <asm/pgtable.h>
|
|
#include <asm/page.h>
|
|
#include <asm/msr.h>
|
|
|
|
# Copyright 2003 Pavel Machek <pavel@suse.cz>, distribute under GPLv2
|
|
#
|
|
# wakeup_code runs in real mode, and at unknown address (determined at run-time).
|
|
# Therefore it must only use relative jumps/calls.
|
|
#
|
|
# Do we need to deal with A20? It is okay: ACPI specs says A20 must be enabled
|
|
#
|
|
# If physical address of wakeup_code is 0x12345, BIOS should call us with
|
|
# cs = 0x1234, eip = 0x05
|
|
#
|
|
|
|
|
|
ALIGN
|
|
.align 16
|
|
ENTRY(wakeup_start)
|
|
wakeup_code:
|
|
wakeup_code_start = .
|
|
.code16
|
|
|
|
# Running in *copy* of this code, somewhere in low 1MB.
|
|
|
|
movb $0xa1, %al ; outb %al, $0x80
|
|
cli
|
|
cld
|
|
# setup data segment
|
|
movw %cs, %ax
|
|
movw %ax, %ds # Make ds:0 point to wakeup_start
|
|
movw %ax, %ss
|
|
# Private stack is needed for ASUS board
|
|
mov $(wakeup_stack - wakeup_code), %sp
|
|
|
|
pushl $0 # Kill any dangerous flags
|
|
popfl
|
|
|
|
movl real_magic - wakeup_code, %eax
|
|
cmpl $0x12345678, %eax
|
|
jne bogus_real_magic
|
|
|
|
call verify_cpu # Verify the cpu supports long
|
|
# mode
|
|
testl %eax, %eax
|
|
jnz no_longmode
|
|
|
|
testl $1, video_flags - wakeup_code
|
|
jz 1f
|
|
lcall $0xc000,$3
|
|
movw %cs, %ax
|
|
movw %ax, %ds # Bios might have played with that
|
|
movw %ax, %ss
|
|
1:
|
|
|
|
testl $2, video_flags - wakeup_code
|
|
jz 1f
|
|
mov video_mode - wakeup_code, %ax
|
|
call mode_seta
|
|
1:
|
|
|
|
movw $0xb800, %ax
|
|
movw %ax,%fs
|
|
movw $0x0e00 + 'L', %fs:(0x10)
|
|
|
|
movb $0xa2, %al ; outb %al, $0x80
|
|
|
|
mov %ds, %ax # Find 32bit wakeup_code addr
|
|
movzx %ax, %esi # (Convert %ds:gdt to a liner ptr)
|
|
shll $4, %esi
|
|
# Fix up the vectors
|
|
addl %esi, wakeup_32_vector - wakeup_code
|
|
addl %esi, wakeup_long64_vector - wakeup_code
|
|
addl %esi, gdt_48a + 2 - wakeup_code # Fixup the gdt pointer
|
|
|
|
lidtl %ds:idt_48a - wakeup_code
|
|
lgdtl %ds:gdt_48a - wakeup_code # load gdt with whatever is
|
|
# appropriate
|
|
|
|
movl $1, %eax # protected mode (PE) bit
|
|
lmsw %ax # This is it!
|
|
jmp 1f
|
|
1:
|
|
|
|
ljmpl *(wakeup_32_vector - wakeup_code)
|
|
|
|
.balign 4
|
|
wakeup_32_vector:
|
|
.long wakeup_32 - wakeup_code
|
|
.word __KERNEL32_CS, 0
|
|
|
|
.code32
|
|
wakeup_32:
|
|
# Running in this code, but at low address; paging is not yet turned on.
|
|
movb $0xa5, %al ; outb %al, $0x80
|
|
|
|
movl $__KERNEL_DS, %eax
|
|
movl %eax, %ds
|
|
|
|
movw $0x0e00 + 'i', %ds:(0xb8012)
|
|
movb $0xa8, %al ; outb %al, $0x80;
|
|
|
|
/*
|
|
* Prepare for entering 64bits mode
|
|
*/
|
|
|
|
/* Enable PAE */
|
|
xorl %eax, %eax
|
|
btsl $5, %eax
|
|
movl %eax, %cr4
|
|
|
|
/* Setup early boot stage 4 level pagetables */
|
|
leal (wakeup_level4_pgt - wakeup_code)(%esi), %eax
|
|
movl %eax, %cr3
|
|
|
|
/* Check if nx is implemented */
|
|
movl $0x80000001, %eax
|
|
cpuid
|
|
movl %edx,%edi
|
|
|
|
/* Enable Long Mode */
|
|
xorl %eax, %eax
|
|
btsl $_EFER_LME, %eax
|
|
|
|
/* No Execute supported? */
|
|
btl $20,%edi
|
|
jnc 1f
|
|
btsl $_EFER_NX, %eax
|
|
|
|
/* Make changes effective */
|
|
1: movl $MSR_EFER, %ecx
|
|
xorl %edx, %edx
|
|
wrmsr
|
|
|
|
xorl %eax, %eax
|
|
btsl $31, %eax /* Enable paging and in turn activate Long Mode */
|
|
btsl $0, %eax /* Enable protected mode */
|
|
|
|
/* Make changes effective */
|
|
movl %eax, %cr0
|
|
|
|
/* At this point:
|
|
CR4.PAE must be 1
|
|
CS.L must be 0
|
|
CR3 must point to PML4
|
|
Next instruction must be a branch
|
|
This must be on identity-mapped page
|
|
*/
|
|
/*
|
|
* At this point we're in long mode but in 32bit compatibility mode
|
|
* with EFER.LME = 1, CS.L = 0, CS.D = 1 (and in turn
|
|
* EFER.LMA = 1). Now we want to jump in 64bit mode, to do that we load
|
|
* the new gdt/idt that has __KERNEL_CS with CS.L = 1.
|
|
*/
|
|
|
|
/* Finally jump in 64bit mode */
|
|
ljmp *(wakeup_long64_vector - wakeup_code)(%esi)
|
|
|
|
.balign 4
|
|
wakeup_long64_vector:
|
|
.long wakeup_long64 - wakeup_code
|
|
.word __KERNEL_CS, 0
|
|
|
|
.code64
|
|
|
|
/* Hooray, we are in Long 64-bit mode (but still running in
|
|
* low memory)
|
|
*/
|
|
wakeup_long64:
|
|
/*
|
|
* We must switch to a new descriptor in kernel space for the GDT
|
|
* because soon the kernel won't have access anymore to the userspace
|
|
* addresses where we're currently running on. We have to do that here
|
|
* because in 32bit we couldn't load a 64bit linear address.
|
|
*/
|
|
lgdt cpu_gdt_descr
|
|
|
|
movw $0x0e00 + 'n', %ds:(0xb8014)
|
|
movb $0xa9, %al ; outb %al, $0x80
|
|
|
|
movq saved_magic, %rax
|
|
movq $0x123456789abcdef0, %rdx
|
|
cmpq %rdx, %rax
|
|
jne bogus_64_magic
|
|
|
|
movw $0x0e00 + 'u', %ds:(0xb8016)
|
|
|
|
nop
|
|
nop
|
|
movw $__KERNEL_DS, %ax
|
|
movw %ax, %ss
|
|
movw %ax, %ds
|
|
movw %ax, %es
|
|
movw %ax, %fs
|
|
movw %ax, %gs
|
|
movq saved_rsp, %rsp
|
|
|
|
movw $0x0e00 + 'x', %ds:(0xb8018)
|
|
movq saved_rbx, %rbx
|
|
movq saved_rdi, %rdi
|
|
movq saved_rsi, %rsi
|
|
movq saved_rbp, %rbp
|
|
|
|
movw $0x0e00 + '!', %ds:(0xb801a)
|
|
movq saved_rip, %rax
|
|
jmp *%rax
|
|
|
|
.code32
|
|
|
|
.align 64
|
|
gdta:
|
|
/* Its good to keep gdt in sync with one in trampoline.S */
|
|
.word 0, 0, 0, 0 # dummy
|
|
/* ??? Why I need the accessed bit set in order for this to work? */
|
|
.quad 0x00cf9b000000ffff # __KERNEL32_CS
|
|
.quad 0x00af9b000000ffff # __KERNEL_CS
|
|
.quad 0x00cf93000000ffff # __KERNEL_DS
|
|
|
|
idt_48a:
|
|
.word 0 # idt limit = 0
|
|
.word 0, 0 # idt base = 0L
|
|
|
|
gdt_48a:
|
|
.word 0x800 # gdt limit=2048,
|
|
# 256 GDT entries
|
|
.long gdta - wakeup_code # gdt base (relocated in later)
|
|
|
|
real_magic: .quad 0
|
|
video_mode: .quad 0
|
|
video_flags: .quad 0
|
|
|
|
.code16
|
|
bogus_real_magic:
|
|
movb $0xba,%al ; outb %al,$0x80
|
|
jmp bogus_real_magic
|
|
|
|
.code64
|
|
bogus_64_magic:
|
|
movb $0xb3,%al ; outb %al,$0x80
|
|
jmp bogus_64_magic
|
|
|
|
.code16
|
|
no_longmode:
|
|
movb $0xbc,%al ; outb %al,$0x80
|
|
jmp no_longmode
|
|
|
|
#include "../verify_cpu.S"
|
|
|
|
/* This code uses an extended set of video mode numbers. These include:
|
|
* Aliases for standard modes
|
|
* NORMAL_VGA (-1)
|
|
* EXTENDED_VGA (-2)
|
|
* ASK_VGA (-3)
|
|
* Video modes numbered by menu position -- NOT RECOMMENDED because of lack
|
|
* of compatibility when extending the table. These are between 0x00 and 0xff.
|
|
*/
|
|
#define VIDEO_FIRST_MENU 0x0000
|
|
|
|
/* Standard BIOS video modes (BIOS number + 0x0100) */
|
|
#define VIDEO_FIRST_BIOS 0x0100
|
|
|
|
/* VESA BIOS video modes (VESA number + 0x0200) */
|
|
#define VIDEO_FIRST_VESA 0x0200
|
|
|
|
/* Video7 special modes (BIOS number + 0x0900) */
|
|
#define VIDEO_FIRST_V7 0x0900
|
|
|
|
# Setting of user mode (AX=mode ID) => CF=success
|
|
.code16
|
|
mode_seta:
|
|
movw %ax, %bx
|
|
#if 0
|
|
cmpb $0xff, %ah
|
|
jz setalias
|
|
|
|
testb $VIDEO_RECALC>>8, %ah
|
|
jnz _setrec
|
|
|
|
cmpb $VIDEO_FIRST_RESOLUTION>>8, %ah
|
|
jnc setres
|
|
|
|
cmpb $VIDEO_FIRST_SPECIAL>>8, %ah
|
|
jz setspc
|
|
|
|
cmpb $VIDEO_FIRST_V7>>8, %ah
|
|
jz setv7
|
|
#endif
|
|
|
|
cmpb $VIDEO_FIRST_VESA>>8, %ah
|
|
jnc check_vesaa
|
|
#if 0
|
|
orb %ah, %ah
|
|
jz setmenu
|
|
#endif
|
|
|
|
decb %ah
|
|
# jz setbios Add bios modes later
|
|
|
|
setbada: clc
|
|
ret
|
|
|
|
check_vesaa:
|
|
subb $VIDEO_FIRST_VESA>>8, %bh
|
|
orw $0x4000, %bx # Use linear frame buffer
|
|
movw $0x4f02, %ax # VESA BIOS mode set call
|
|
int $0x10
|
|
cmpw $0x004f, %ax # AL=4f if implemented
|
|
jnz _setbada # AH=0 if OK
|
|
|
|
stc
|
|
ret
|
|
|
|
_setbada: jmp setbada
|
|
|
|
wakeup_stack_begin: # Stack grows down
|
|
|
|
.org 0xff0
|
|
wakeup_stack: # Just below end of page
|
|
|
|
.org 0x1000
|
|
ENTRY(wakeup_level4_pgt)
|
|
.quad level3_ident_pgt - __START_KERNEL_map + _KERNPG_TABLE
|
|
.fill 510,8,0
|
|
/* (2^48-(2*1024*1024*1024))/(2^39) = 511 */
|
|
.quad level3_kernel_pgt - __START_KERNEL_map + _KERNPG_TABLE
|
|
|
|
ENTRY(wakeup_end)
|
|
|
|
##
|
|
# acpi_copy_wakeup_routine
|
|
#
|
|
# Copy the above routine to low memory.
|
|
#
|
|
# Parameters:
|
|
# %rdi: place to copy wakeup routine to
|
|
#
|
|
# Returned address is location of code in low memory (past data and stack)
|
|
#
|
|
.code64
|
|
ENTRY(acpi_copy_wakeup_routine)
|
|
pushq %rax
|
|
pushq %rdx
|
|
|
|
movl saved_video_mode, %edx
|
|
movl %edx, video_mode - wakeup_start (,%rdi)
|
|
movl acpi_video_flags, %edx
|
|
movl %edx, video_flags - wakeup_start (,%rdi)
|
|
movq $0x12345678, real_magic - wakeup_start (,%rdi)
|
|
movq $0x123456789abcdef0, %rdx
|
|
movq %rdx, saved_magic
|
|
|
|
movq saved_magic, %rax
|
|
movq $0x123456789abcdef0, %rdx
|
|
cmpq %rdx, %rax
|
|
jne bogus_64_magic
|
|
|
|
# restore the regs we used
|
|
popq %rdx
|
|
popq %rax
|
|
ENTRY(do_suspend_lowlevel_s4bios)
|
|
ret
|
|
|
|
.align 2
|
|
.p2align 4,,15
|
|
.globl do_suspend_lowlevel
|
|
.type do_suspend_lowlevel,@function
|
|
do_suspend_lowlevel:
|
|
.LFB5:
|
|
subq $8, %rsp
|
|
xorl %eax, %eax
|
|
call save_processor_state
|
|
|
|
movq %rsp, saved_context_esp(%rip)
|
|
movq %rax, saved_context_eax(%rip)
|
|
movq %rbx, saved_context_ebx(%rip)
|
|
movq %rcx, saved_context_ecx(%rip)
|
|
movq %rdx, saved_context_edx(%rip)
|
|
movq %rbp, saved_context_ebp(%rip)
|
|
movq %rsi, saved_context_esi(%rip)
|
|
movq %rdi, saved_context_edi(%rip)
|
|
movq %r8, saved_context_r08(%rip)
|
|
movq %r9, saved_context_r09(%rip)
|
|
movq %r10, saved_context_r10(%rip)
|
|
movq %r11, saved_context_r11(%rip)
|
|
movq %r12, saved_context_r12(%rip)
|
|
movq %r13, saved_context_r13(%rip)
|
|
movq %r14, saved_context_r14(%rip)
|
|
movq %r15, saved_context_r15(%rip)
|
|
pushfq ; popq saved_context_eflags(%rip)
|
|
|
|
movq $.L97, saved_rip(%rip)
|
|
|
|
movq %rsp,saved_rsp
|
|
movq %rbp,saved_rbp
|
|
movq %rbx,saved_rbx
|
|
movq %rdi,saved_rdi
|
|
movq %rsi,saved_rsi
|
|
|
|
addq $8, %rsp
|
|
movl $3, %edi
|
|
xorl %eax, %eax
|
|
jmp acpi_enter_sleep_state
|
|
.L97:
|
|
.p2align 4,,7
|
|
.L99:
|
|
.align 4
|
|
movl $24, %eax
|
|
movw %ax, %ds
|
|
movq saved_context+58(%rip), %rax
|
|
movq %rax, %cr4
|
|
movq saved_context+50(%rip), %rax
|
|
movq %rax, %cr3
|
|
movq saved_context+42(%rip), %rax
|
|
movq %rax, %cr2
|
|
movq saved_context+34(%rip), %rax
|
|
movq %rax, %cr0
|
|
pushq saved_context_eflags(%rip) ; popfq
|
|
movq saved_context_esp(%rip), %rsp
|
|
movq saved_context_ebp(%rip), %rbp
|
|
movq saved_context_eax(%rip), %rax
|
|
movq saved_context_ebx(%rip), %rbx
|
|
movq saved_context_ecx(%rip), %rcx
|
|
movq saved_context_edx(%rip), %rdx
|
|
movq saved_context_esi(%rip), %rsi
|
|
movq saved_context_edi(%rip), %rdi
|
|
movq saved_context_r08(%rip), %r8
|
|
movq saved_context_r09(%rip), %r9
|
|
movq saved_context_r10(%rip), %r10
|
|
movq saved_context_r11(%rip), %r11
|
|
movq saved_context_r12(%rip), %r12
|
|
movq saved_context_r13(%rip), %r13
|
|
movq saved_context_r14(%rip), %r14
|
|
movq saved_context_r15(%rip), %r15
|
|
|
|
xorl %eax, %eax
|
|
addq $8, %rsp
|
|
jmp restore_processor_state
|
|
.LFE5:
|
|
.Lfe5:
|
|
.size do_suspend_lowlevel,.Lfe5-do_suspend_lowlevel
|
|
|
|
.data
|
|
ALIGN
|
|
ENTRY(saved_rbp) .quad 0
|
|
ENTRY(saved_rsi) .quad 0
|
|
ENTRY(saved_rdi) .quad 0
|
|
ENTRY(saved_rbx) .quad 0
|
|
|
|
ENTRY(saved_rip) .quad 0
|
|
ENTRY(saved_rsp) .quad 0
|
|
|
|
ENTRY(saved_magic) .quad 0
|