255 lines
6.7 KiB
C
255 lines
6.7 KiB
C
/*
|
|
* Freescale 83xx USB SOC setup code
|
|
*
|
|
* Copyright (C) 2007 Freescale Semiconductor, Inc.
|
|
* Author: Li Yang
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify it
|
|
* under the terms of the GNU General Public License as published by the
|
|
* Free Software Foundation; either version 2 of the License, or (at your
|
|
* option) any later version.
|
|
*/
|
|
|
|
|
|
#include <linux/stddef.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/errno.h>
|
|
#include <linux/of.h>
|
|
|
|
#include <asm/io.h>
|
|
#include <asm/prom.h>
|
|
#include <sysdev/fsl_soc.h>
|
|
|
|
#include "mpc83xx.h"
|
|
|
|
|
|
#ifdef CONFIG_PPC_MPC834x
|
|
int mpc834x_usb_cfg(void)
|
|
{
|
|
unsigned long sccr, sicrl, sicrh;
|
|
void __iomem *immap;
|
|
struct device_node *np = NULL;
|
|
int port0_is_dr = 0, port1_is_dr = 0;
|
|
const void *prop, *dr_mode;
|
|
|
|
immap = ioremap(get_immrbase(), 0x1000);
|
|
if (!immap)
|
|
return -ENOMEM;
|
|
|
|
/* Read registers */
|
|
/* Note: DR and MPH must use the same clock setting in SCCR */
|
|
sccr = in_be32(immap + MPC83XX_SCCR_OFFS) & ~MPC83XX_SCCR_USB_MASK;
|
|
sicrl = in_be32(immap + MPC83XX_SICRL_OFFS) & ~MPC834X_SICRL_USB_MASK;
|
|
sicrh = in_be32(immap + MPC83XX_SICRH_OFFS) & ~MPC834X_SICRH_USB_UTMI;
|
|
|
|
np = of_find_compatible_node(NULL, NULL, "fsl-usb2-dr");
|
|
if (np) {
|
|
sccr |= MPC83XX_SCCR_USB_DRCM_11; /* 1:3 */
|
|
|
|
prop = of_get_property(np, "phy_type", NULL);
|
|
port1_is_dr = 1;
|
|
if (prop && (!strcmp(prop, "utmi") ||
|
|
!strcmp(prop, "utmi_wide"))) {
|
|
sicrl |= MPC834X_SICRL_USB0 | MPC834X_SICRL_USB1;
|
|
sicrh |= MPC834X_SICRH_USB_UTMI;
|
|
port0_is_dr = 1;
|
|
} else if (prop && !strcmp(prop, "serial")) {
|
|
dr_mode = of_get_property(np, "dr_mode", NULL);
|
|
if (dr_mode && !strcmp(dr_mode, "otg")) {
|
|
sicrl |= MPC834X_SICRL_USB0 | MPC834X_SICRL_USB1;
|
|
port0_is_dr = 1;
|
|
} else {
|
|
sicrl |= MPC834X_SICRL_USB1;
|
|
}
|
|
} else if (prop && !strcmp(prop, "ulpi")) {
|
|
sicrl |= MPC834X_SICRL_USB1;
|
|
} else {
|
|
printk(KERN_WARNING "834x USB PHY type not supported\n");
|
|
}
|
|
of_node_put(np);
|
|
}
|
|
np = of_find_compatible_node(NULL, NULL, "fsl-usb2-mph");
|
|
if (np) {
|
|
sccr |= MPC83XX_SCCR_USB_MPHCM_11; /* 1:3 */
|
|
|
|
prop = of_get_property(np, "port0", NULL);
|
|
if (prop) {
|
|
if (port0_is_dr)
|
|
printk(KERN_WARNING
|
|
"834x USB port0 can't be used by both DR and MPH!\n");
|
|
sicrl &= ~MPC834X_SICRL_USB0;
|
|
}
|
|
prop = of_get_property(np, "port1", NULL);
|
|
if (prop) {
|
|
if (port1_is_dr)
|
|
printk(KERN_WARNING
|
|
"834x USB port1 can't be used by both DR and MPH!\n");
|
|
sicrl &= ~MPC834X_SICRL_USB1;
|
|
}
|
|
of_node_put(np);
|
|
}
|
|
|
|
/* Write back */
|
|
out_be32(immap + MPC83XX_SCCR_OFFS, sccr);
|
|
out_be32(immap + MPC83XX_SICRL_OFFS, sicrl);
|
|
out_be32(immap + MPC83XX_SICRH_OFFS, sicrh);
|
|
|
|
iounmap(immap);
|
|
return 0;
|
|
}
|
|
#endif /* CONFIG_PPC_MPC834x */
|
|
|
|
#ifdef CONFIG_PPC_MPC831x
|
|
int mpc831x_usb_cfg(void)
|
|
{
|
|
u32 temp;
|
|
void __iomem *immap, *usb_regs;
|
|
struct device_node *np = NULL;
|
|
struct device_node *immr_node = NULL;
|
|
const void *prop;
|
|
struct resource res;
|
|
int ret = 0;
|
|
#ifdef CONFIG_USB_OTG
|
|
const void *dr_mode;
|
|
#endif
|
|
|
|
np = of_find_compatible_node(NULL, NULL, "fsl-usb2-dr");
|
|
if (!np)
|
|
return -ENODEV;
|
|
prop = of_get_property(np, "phy_type", NULL);
|
|
|
|
/* Map IMMR space for pin and clock settings */
|
|
immap = ioremap(get_immrbase(), 0x1000);
|
|
if (!immap) {
|
|
of_node_put(np);
|
|
return -ENOMEM;
|
|
}
|
|
|
|
/* Configure clock */
|
|
immr_node = of_get_parent(np);
|
|
if (immr_node && (of_device_is_compatible(immr_node, "fsl,mpc8315-immr") ||
|
|
of_device_is_compatible(immr_node, "fsl,mpc8308-immr")))
|
|
clrsetbits_be32(immap + MPC83XX_SCCR_OFFS,
|
|
MPC8315_SCCR_USB_MASK,
|
|
MPC8315_SCCR_USB_DRCM_01);
|
|
else
|
|
clrsetbits_be32(immap + MPC83XX_SCCR_OFFS,
|
|
MPC83XX_SCCR_USB_MASK,
|
|
MPC83XX_SCCR_USB_DRCM_11);
|
|
|
|
/* Configure pin mux for ULPI. There is no pin mux for UTMI */
|
|
if (prop && !strcmp(prop, "ulpi")) {
|
|
if (of_device_is_compatible(immr_node, "fsl,mpc8308-immr")) {
|
|
clrsetbits_be32(immap + MPC83XX_SICRH_OFFS,
|
|
MPC8308_SICRH_USB_MASK,
|
|
MPC8308_SICRH_USB_ULPI);
|
|
} else if (of_device_is_compatible(immr_node, "fsl,mpc8315-immr")) {
|
|
clrsetbits_be32(immap + MPC83XX_SICRL_OFFS,
|
|
MPC8315_SICRL_USB_MASK,
|
|
MPC8315_SICRL_USB_ULPI);
|
|
clrsetbits_be32(immap + MPC83XX_SICRH_OFFS,
|
|
MPC8315_SICRH_USB_MASK,
|
|
MPC8315_SICRH_USB_ULPI);
|
|
} else {
|
|
clrsetbits_be32(immap + MPC83XX_SICRL_OFFS,
|
|
MPC831X_SICRL_USB_MASK,
|
|
MPC831X_SICRL_USB_ULPI);
|
|
clrsetbits_be32(immap + MPC83XX_SICRH_OFFS,
|
|
MPC831X_SICRH_USB_MASK,
|
|
MPC831X_SICRH_USB_ULPI);
|
|
}
|
|
}
|
|
|
|
iounmap(immap);
|
|
|
|
if (immr_node)
|
|
of_node_put(immr_node);
|
|
|
|
/* Map USB SOC space */
|
|
ret = of_address_to_resource(np, 0, &res);
|
|
if (ret) {
|
|
of_node_put(np);
|
|
return ret;
|
|
}
|
|
usb_regs = ioremap(res.start, res.end - res.start + 1);
|
|
|
|
/* Using on-chip PHY */
|
|
if (prop && (!strcmp(prop, "utmi_wide") ||
|
|
!strcmp(prop, "utmi"))) {
|
|
u32 refsel;
|
|
|
|
if (of_device_is_compatible(immr_node, "fsl,mpc8308-immr"))
|
|
goto out;
|
|
|
|
if (of_device_is_compatible(immr_node, "fsl,mpc8315-immr"))
|
|
refsel = CONTROL_REFSEL_24MHZ;
|
|
else
|
|
refsel = CONTROL_REFSEL_48MHZ;
|
|
/* Set UTMI_PHY_EN and REFSEL */
|
|
out_be32(usb_regs + FSL_USB2_CONTROL_OFFS,
|
|
CONTROL_UTMI_PHY_EN | refsel);
|
|
/* Using external UPLI PHY */
|
|
} else if (prop && !strcmp(prop, "ulpi")) {
|
|
/* Set PHY_CLK_SEL to ULPI */
|
|
temp = CONTROL_PHY_CLK_SEL_ULPI;
|
|
#ifdef CONFIG_USB_OTG
|
|
/* Set OTG_PORT */
|
|
if (!of_device_is_compatible(immr_node, "fsl,mpc8308-immr")) {
|
|
dr_mode = of_get_property(np, "dr_mode", NULL);
|
|
if (dr_mode && !strcmp(dr_mode, "otg"))
|
|
temp |= CONTROL_OTG_PORT;
|
|
}
|
|
#endif /* CONFIG_USB_OTG */
|
|
out_be32(usb_regs + FSL_USB2_CONTROL_OFFS, temp);
|
|
} else {
|
|
printk(KERN_WARNING "831x USB PHY type not supported\n");
|
|
ret = -EINVAL;
|
|
}
|
|
|
|
out:
|
|
iounmap(usb_regs);
|
|
of_node_put(np);
|
|
return ret;
|
|
}
|
|
#endif /* CONFIG_PPC_MPC831x */
|
|
|
|
#ifdef CONFIG_PPC_MPC837x
|
|
int mpc837x_usb_cfg(void)
|
|
{
|
|
void __iomem *immap;
|
|
struct device_node *np = NULL;
|
|
const void *prop;
|
|
int ret = 0;
|
|
|
|
np = of_find_compatible_node(NULL, NULL, "fsl-usb2-dr");
|
|
if (!np || !of_device_is_available(np))
|
|
return -ENODEV;
|
|
prop = of_get_property(np, "phy_type", NULL);
|
|
|
|
if (!prop || (strcmp(prop, "ulpi") && strcmp(prop, "serial"))) {
|
|
printk(KERN_WARNING "837x USB PHY type not supported\n");
|
|
of_node_put(np);
|
|
return -EINVAL;
|
|
}
|
|
|
|
/* Map IMMR space for pin and clock settings */
|
|
immap = ioremap(get_immrbase(), 0x1000);
|
|
if (!immap) {
|
|
of_node_put(np);
|
|
return -ENOMEM;
|
|
}
|
|
|
|
/* Configure clock */
|
|
clrsetbits_be32(immap + MPC83XX_SCCR_OFFS, MPC837X_SCCR_USB_DRCM_11,
|
|
MPC837X_SCCR_USB_DRCM_11);
|
|
|
|
/* Configure pin mux for ULPI/serial */
|
|
clrsetbits_be32(immap + MPC83XX_SICRL_OFFS, MPC837X_SICRL_USB_MASK,
|
|
MPC837X_SICRL_USB_ULPI);
|
|
|
|
iounmap(immap);
|
|
of_node_put(np);
|
|
return ret;
|
|
}
|
|
#endif /* CONFIG_PPC_MPC837x */
|