linux-stable-rt/drivers/spi
Cliff Cai 9c3e737561 spi/spi_bfin_sport: new driver for a SPI bus via the Blackfin SPORT peripheral
The Blackfin SPORT peripheral is a pretty flexible device.  With enough
coaching, we can make it generate SPI compatible waveforms.  This is
desirable as the SPORT can run at much higher clock frequencies than the
dedicated on-chip SPI peripheral, and it can do full duplex DMA.  It also
opens up the possibility of multiple SPI buses in case someone wants to
dedicate a whole bus to a specific part that does not play well with
others.

Signed-off-by: Cliff Cai <cliff.cai@analog.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2011-05-27 01:23:54 -06:00
..
Kconfig spi/spi_bfin_sport: new driver for a SPI bus via the Blackfin SPORT peripheral 2011-05-27 01:23:54 -06:00
Makefile spi/spi_bfin_sport: new driver for a SPI bus via the Blackfin SPORT peripheral 2011-05-27 01:23:54 -06:00
amba-pl022.c spi/amba-pl022: work in polling or interrupt mode if pl022_dma_probe fails 2011-05-20 00:43:07 -06:00
ath79_spi.c
atmel_spi.c
atmel_spi.h
au1550_spi.c
coldfire_qspi.c coldfire_qspi compile fix 2011-05-24 15:17:22 +10:00
davinci_spi.c
dw_spi.c
dw_spi.h
dw_spi_mid.c
dw_spi_mmio.c
dw_spi_pci.c
ep93xx_spi.c
mpc52xx_psc_spi.c
mpc52xx_spi.c
mpc512x_psc_spi.c
omap2_mcspi.c
omap_spi_100k.c
omap_uwire.c
orion_spi.c
pxa2xx_spi.c
pxa2xx_spi_pci.c
spi.c spi: Use void pointers for data in simple SPI I/O operations 2011-05-20 00:43:07 -06:00
spi_altera.c
spi_bfin5xx.c
spi_bfin_sport.c spi/spi_bfin_sport: new driver for a SPI bus via the Blackfin SPORT peripheral 2011-05-27 01:23:54 -06:00
spi_bitbang.c
spi_bitbang_txrx.h
spi_butterfly.c
spi_fsl_espi.c
spi_fsl_lib.c
spi_fsl_lib.h
spi_fsl_spi.c
spi_gpio.c
spi_imx.c
spi_lm70llp.c
spi_nuc900.c spi/spi_nuc900: Use spi_bitbang_stop instead of spi_unregister_master in nuc900_spi_remove 2011-05-20 00:43:07 -06:00
spi_oc_tiny.c
spi_ppc4xx.c
spi_s3c24xx.c spi/spi_s3c24xx: Use spi_bitbang_stop instead of spi_unregister_master in s3c24xx_spi_remove 2011-05-20 00:43:07 -06:00
spi_s3c24xx_fiq.S
spi_s3c24xx_fiq.h
spi_s3c24xx_gpio.c
spi_s3c64xx.c
spi_sh.c spi/spi_sh: use spi_unregister_master instead of spi_master_put in remove path 2011-05-20 00:43:07 -06:00
spi_sh_msiof.c
spi_sh_sci.c
spi_stmp.c
spi_tegra.c spi/spi_tegra: use spi_unregister_master() instead of spi_master_put() 2011-05-20 00:43:07 -06:00
spi_topcliff_pch.c
spi_txx9.c
spidev.c
ti-ssp-spi.c
tle62x0.c spi/tle620x: add missing device_remove_file() 2011-05-26 21:30:25 -06:00
xilinx_spi.c mfd: Use mfd cell platform_data for timberdale cells platform bits 2011-05-26 19:45:05 +02:00