linux-stable-rt/arch/powerpc/platforms/44x/warp-nand.c

106 lines
2.2 KiB
C

/*
* PIKA Warp(tm) NAND flash specific routines
*
* Copyright (c) 2008 PIKA Technologies
* Sean MacLennan <smaclennan@pikatech.com>
*/
#include <linux/platform_device.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/map.h>
#include <linux/mtd/partitions.h>
#include <linux/mtd/nand.h>
#include <linux/mtd/ndfc.h>
#ifdef CONFIG_MTD_NAND_NDFC
#define CS_NAND_0 1 /* use chip select 1 for NAND device 0 */
#define WARP_NAND_FLASH_REG_ADDR 0xD0000000UL
#define WARP_NAND_FLASH_REG_SIZE 0x2000
static struct resource warp_ndfc = {
.start = WARP_NAND_FLASH_REG_ADDR,
.end = WARP_NAND_FLASH_REG_ADDR + WARP_NAND_FLASH_REG_SIZE,
.flags = IORESOURCE_MEM,
};
static struct mtd_partition nand_parts[] = {
{
.name = "kernel",
.offset = 0,
.size = 0x0200000
},
{
.name = "root",
.offset = 0x0200000,
.size = 0x3400000
},
{
.name = "user",
.offset = 0x3600000,
.size = 0x0A00000
},
};
struct ndfc_controller_settings warp_ndfc_settings = {
.ccr_settings = (NDFC_CCR_BS(CS_NAND_0) | NDFC_CCR_ARAC1),
.ndfc_erpn = 0,
};
static struct ndfc_chip_settings warp_chip0_settings = {
.bank_settings = 0x80002222,
};
struct platform_nand_ctrl warp_nand_ctrl = {
.priv = &warp_ndfc_settings,
};
static struct platform_device warp_ndfc_device = {
.name = "ndfc-nand",
.id = 0,
.dev = {
.platform_data = &warp_nand_ctrl,
},
.num_resources = 1,
.resource = &warp_ndfc,
};
static struct nand_ecclayout nand_oob_16 = {
.eccbytes = 3,
.eccpos = { 0, 1, 2, 3, 6, 7 },
.oobfree = { {.offset = 8, .length = 16} }
};
static struct platform_nand_chip warp_nand_chip0 = {
.nr_chips = 1,
.chip_offset = CS_NAND_0,
.nr_partitions = ARRAY_SIZE(nand_parts),
.partitions = nand_parts,
.chip_delay = 50,
.ecclayout = &nand_oob_16,
.priv = &warp_chip0_settings,
};
static struct platform_device warp_nand_device = {
.name = "ndfc-chip",
.id = 0,
.num_resources = 1,
.resource = &warp_ndfc,
.dev = {
.platform_data = &warp_nand_chip0,
.parent = &warp_ndfc_device.dev,
}
};
static int warp_setup_nand_flash(void)
{
platform_device_register(&warp_ndfc_device);
platform_device_register(&warp_nand_device);
return 0;
}
device_initcall(warp_setup_nand_flash);
#endif