linux-stable-rt/include/asm-blackfin/mach-bf537/anomaly.h

140 lines
6.7 KiB
C

/*
* File: include/asm-blackfin/mach-bf537/anomaly.h
* Based on:
* Author:
*
* Created:
* Description:
*
* Rev:
*
* Modified:
*
*
* Bugs: Enter bugs at http://blackfin.uclinux.org/
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2, or (at your option)
* any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; see the file COPYING.
* If not, write to the Free Software Foundation,
* 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
*/
/* This file shoule be up to date with:
* - Revision J, June 1, 2006; ADSP-BF537 Blackfin Processor Anomaly List
* - Revision I, June 1, 2006; ADSP-BF536 Blackfin Processor Anomaly List
* - Revision J, June 1, 2006; ADSP-BF534 Blackfin Processor Anomaly List
*/
#ifndef _MACH_ANOMALY_H_
#define _MACH_ANOMALY_H_
/* We do not support 0.1 silicon - sorry */
#if (defined(CONFIG_BF_REV_0_1))
#error Kernel will not work on BF537/6/4 Version 0.1
#endif
#if (defined(CONFIG_BF_REV_0_3) || defined(CONFIG_BF_REV_0_2))
#define ANOMALY_05000074 /* A multi issue instruction with dsp32shiftimm in
slot1 and store of a P register in slot 2 is not
supported */
#define ANOMALY_05000119 /* DMA_RUN bit is not valid after a Peripheral Receive
Channel DMA stops */
#define ANOMALY_05000122 /* Rx.H can not be used to access 16-bit System MMR
registers. */
#define ANOMALY_05000166 /* PPI Data Lengths Between 8 and 16 do not zero out
upper bits*/
#define ANOMALY_05000180 /* PPI_DELAY not functional in PPI modes with 0 frame
syncs */
#if (defined(CONFIG_BF537) || defined(CONFIG_BF536))
#define ANOMALY_05000247 /* CLKIN Buffer Output Enable Reset Behavior Is
Changed */
#endif
#define ANOMALY_05000265 /* Sensitivity to noise with slow input edge rates on
SPORT external receive and transmit clocks. */
#define ANOMALY_05000272 /* Certain data cache write through modes fail for
VDDint <=0.9V */
#define ANOMALY_05000273 /* Writes to Synchronous SDRAM memory may be lost */
#define ANOMALY_05000277 /* Writes to a flag data register one SCLK cycle after
an edge is detected may clear interrupt */
#define ANOMALY_05000281 /* False Hardware Error Exception when ISR context is
not restored */
#define ANOMALY_05000282 /* Memory DMA corruption with 32-bit data and traffic
control */
#define ANOMALY_05000283 /* A system MMR write is stalled indefinitely when
killed in a particular stage*/
#define ANOMALY_05000310 /* False hardware errors caused by fetches at the
* boundary of reserved memory */
#define ANOMALY_05000312 /* Errors when SSYNC, CSYNC, or loads to LT, LB and LC
registers are interrupted */
#define ANOMALY_05000313 /* PPI is level sensitive on first transfer */
#define ANOMALY_05000322 /* EMAC RMII mode at 10-Base-T speed: RX frames not
* received properly */
#endif
#if defined(CONFIG_BF_REV_0_2)
#define ANOMALY_05000244 /* With instruction cache enabled, a CSYNC or SSYNC or
IDLE around a Change of Control causes
unpredictable results */
#define ANOMALY_05000250 /* Incorrect Bit-Shift of Data Word in Multichannel
(TDM) */
#if (defined(CONFIG_BF537) || defined(CONFIG_BF536))
#define ANOMALY_05000252 /* EMAC Tx DMA error after an early frame abort */
#endif
#define ANOMALY_05000253 /* Maximum external clock speed for Timers */
#define ANOMALY_05000255 /* Entering Hibernate Mode with RTC Seconds event
interrupt not functional */
#if (defined(CONFIG_BF537) || defined(CONFIG_BF536))
#define ANOMALY_05000256 /* EMAC MDIO input latched on wrong MDC edge */
#endif
#define ANOMALY_05000257 /* An interrupt or exception during short Hardware
loops may cause the instruction fetch unit to
malfunction */
#define ANOMALY_05000258 /* Instruction Cache is corrupted when bit 9 and 12 of
the ICPLB Data registers differ */
#define ANOMALY_05000260 /* ICPLB_STATUS MMR register may be corrupted */
#define ANOMALY_05000261 /* DCPLB_FAULT_ADDR MMR register may be corrupted */
#define ANOMALY_05000262 /* Stores to data cache may be lost */
#define ANOMALY_05000263 /* Hardware loop corrupted when taking an ICPLB exception */
#define ANOMALY_05000264 /* A Sync instruction (CSYNC, SSYNC) or an IDLE
instruction will cause an infinite stall in the
second to last instruction in a hardware loop */
#define ANOMALY_05000268 /* Memory DMA error when peripheral DMA is running
and non-zero DEB_TRAFFIC_PERIOD value */
#define ANOMALY_05000270 /* High I/O activity causes the output voltage of the
internal voltage regulator (VDDint) to decrease */
#define ANOMALY_05000277 /* Writes to a flag data register one SCLK cycle after
an edge is detected may clear interrupt */
#define ANOMALY_05000278 /* Disabling Peripherals with DMA running may cause
DMA system instability */
#define ANOMALY_05000280 /* SPI Master boot mode does not work well with
Atmel Dataflash devices */
#define ANOMALY_05000281 /* False Hardware Error Exception when ISR context
* is not restored */
#define ANOMALY_05000282 /* Memory DMA corruption with 32-bit data and traffic
* control */
#define ANOMALY_05000283 /* System MMR Write Is Stalled Indefinitely When
* Killed in a Particular Stage */
#define ANOMALY_05000285 /* New Feature: EMAC TX DMA Word Alignment
* (Not Available On Older Silicon) */
#define ANOMALY_05000288 /* SPORTs may receive bad data if FIFOs fill up */
#define ANOMALY_05000315 /* Killed System MMR Write Completes Erroneously
* On Next System MMR Access */
#define ANOMALY_05000316 /* EMAC RMII mode: collisions occur in Full Duplex
* mode */
#define ANOMALY_05000321 /* EMAC RMII mode: TX frames in half duplex fail with
* status No Carrier */
#endif /* CONFIG_BF_REV_0_2 */
#endif /* _MACH_ANOMALY_H_ */