630 lines
16 KiB
C
630 lines
16 KiB
C
/*!***************************************************************************
|
|
*!
|
|
*! FILE NAME : ds1302.c
|
|
*!
|
|
*! DESCRIPTION: Implements an interface for the DS1302 RTC through Etrax I/O
|
|
*!
|
|
*! Functions exported: ds1302_readreg, ds1302_writereg, ds1302_init
|
|
*!
|
|
*! $Log: ds1302.c,v $
|
|
*! Revision 1.18 2005/01/24 09:11:26 mikaelam
|
|
*! Minor changes to get DS1302 RTC chip driver to work
|
|
*!
|
|
*! Revision 1.17 2005/01/05 06:11:22 starvik
|
|
*! No need to do local_irq_disable after local_irq_save.
|
|
*!
|
|
*! Revision 1.16 2004/12/13 12:21:52 starvik
|
|
*! Added I/O and DMA allocators from Linux 2.4
|
|
*!
|
|
*! Revision 1.14 2004/08/24 06:48:43 starvik
|
|
*! Whitespace cleanup
|
|
*!
|
|
*! Revision 1.13 2004/05/28 09:26:59 starvik
|
|
*! Modified I2C initialization to work in 2.6.
|
|
*!
|
|
*! Revision 1.12 2004/05/14 07:58:03 starvik
|
|
*! Merge of changes from 2.4
|
|
*!
|
|
*! Revision 1.10 2004/02/04 09:25:12 starvik
|
|
*! Merge of Linux 2.6.2
|
|
*!
|
|
*! Revision 1.9 2003/07/04 08:27:37 starvik
|
|
*! Merge of Linux 2.5.74
|
|
*!
|
|
*! Revision 1.8 2003/04/09 05:20:47 starvik
|
|
*! Merge of Linux 2.5.67
|
|
*!
|
|
*! Revision 1.6 2003/01/09 14:42:51 starvik
|
|
*! Merge of Linux 2.5.55
|
|
*!
|
|
*! Revision 1.4 2002/12/11 13:13:57 starvik
|
|
*! Added arch/ to v10 specific includes
|
|
*! Added fix from Linux 2.4 in serial.c (flush_to_flip_buffer)
|
|
*!
|
|
*! Revision 1.3 2002/11/20 11:56:10 starvik
|
|
*! Merge of Linux 2.5.48
|
|
*!
|
|
*! Revision 1.2 2002/11/18 13:16:06 starvik
|
|
*! Linux 2.5 port of latest 2.4 drivers
|
|
*!
|
|
*! Revision 1.15 2002/10/11 16:14:33 johana
|
|
*! Added CONFIG_ETRAX_DS1302_TRICKLE_CHARGE and initial setting of the
|
|
*! trcklecharge register.
|
|
*!
|
|
*! Revision 1.14 2002/10/10 12:15:38 magnusmn
|
|
*! Added support for having the RST signal on bit g0
|
|
*!
|
|
*! Revision 1.13 2002/05/29 15:16:08 johana
|
|
*! Removed unused variables.
|
|
*!
|
|
*! Revision 1.12 2002/04/10 15:35:25 johana
|
|
*! Moved probe function closer to init function and marked it __init.
|
|
*!
|
|
*! Revision 1.11 2001/06/14 12:35:52 jonashg
|
|
*! The ATA hack is back. It is unfortunately the only way to set g27 to output.
|
|
*!
|
|
*! Revision 1.9 2001/06/14 10:00:14 jonashg
|
|
*! No need for tempudelay to be inline anymore (had to adjust the usec to
|
|
*! loops conversion because of this to make it slow enough to be a udelay).
|
|
*!
|
|
*! Revision 1.8 2001/06/14 08:06:32 jonashg
|
|
*! Made tempudelay delay usecs (well, just a tad more).
|
|
*!
|
|
*! Revision 1.7 2001/06/13 14:18:11 jonashg
|
|
*! Only allow processes with SYS_TIME capability to set time and charge.
|
|
*!
|
|
*! Revision 1.6 2001/06/12 15:22:07 jonashg
|
|
*! * Made init function __init.
|
|
*! * Parameter to out_byte() is unsigned char.
|
|
*! * The magic number 42 has got a name.
|
|
*! * Removed comment about /proc (nothing is exported there).
|
|
*!
|
|
*! Revision 1.5 2001/06/12 14:35:13 jonashg
|
|
*! Gave the module a name and added it to printk's.
|
|
*!
|
|
*! Revision 1.4 2001/05/31 14:53:40 jonashg
|
|
*! Made tempudelay() inline so that the watchdog doesn't reset (see
|
|
*! function comment).
|
|
*!
|
|
*! Revision 1.3 2001/03/26 16:03:06 bjornw
|
|
*! Needs linux/config.h
|
|
*!
|
|
*! Revision 1.2 2001/03/20 19:42:00 bjornw
|
|
*! Use the ETRAX prefix on the DS1302 options
|
|
*!
|
|
*! Revision 1.1 2001/03/20 09:13:50 magnusmn
|
|
*! Linux 2.4 port
|
|
*!
|
|
*! Revision 1.10 2000/07/05 15:38:23 bjornw
|
|
*! Dont update kernel time when a RTC_SET_TIME is done
|
|
*!
|
|
*! Revision 1.9 2000/03/02 15:42:59 macce
|
|
*! * Hack to make RTC work on all 2100/2400
|
|
*!
|
|
*! Revision 1.8 2000/02/23 16:59:18 torbjore
|
|
*! added setup of R_GEN_CONFIG when RTC is connected to the generic port.
|
|
*!
|
|
*! Revision 1.7 2000/01/17 15:51:43 johana
|
|
*! Added RTC_SET_CHARGE ioctl to enable trickle charger.
|
|
*!
|
|
*! Revision 1.6 1999/10/27 13:19:47 bjornw
|
|
*! Added update_xtime_from_cmos which reads back the updated RTC into the kernel.
|
|
*! /dev/rtc calls it now.
|
|
*!
|
|
*! Revision 1.5 1999/10/27 12:39:37 bjornw
|
|
*! Disabled superuser check. Anyone can now set the time.
|
|
*!
|
|
*! Revision 1.4 1999/09/02 13:27:46 pkj
|
|
*! Added shadow for R_PORT_PB_CONFIG.
|
|
*! Renamed port_g_shadow to port_g_data_shadow.
|
|
*!
|
|
*! Revision 1.3 1999/09/02 08:28:06 pkj
|
|
*! Made it possible to select either port PB or the generic port for the RST
|
|
*! signal line to the DS1302 RTC.
|
|
*! Also make sure the RST bit is configured as output on Port PB (if used).
|
|
*!
|
|
*! Revision 1.2 1999/09/01 14:47:20 bjornw
|
|
*! Added support for /dev/rtc operations with ioctl RD_TIME and SET_TIME to read
|
|
*! and set the date. Register as major 121.
|
|
*!
|
|
*! Revision 1.1 1999/09/01 09:45:29 bjornw
|
|
*! Implemented a DS1302 RTC driver.
|
|
*!
|
|
*!
|
|
*! ---------------------------------------------------------------------------
|
|
*!
|
|
*! (C) Copyright 1999, 2000, 2001, 2002, 2003, 2004 Axis Communications AB, LUND, SWEDEN
|
|
*!
|
|
*! $Id: ds1302.c,v 1.18 2005/01/24 09:11:26 mikaelam Exp $
|
|
*!
|
|
*!***************************************************************************/
|
|
|
|
#include <linux/config.h>
|
|
|
|
#include <linux/fs.h>
|
|
#include <linux/init.h>
|
|
#include <linux/mm.h>
|
|
#include <linux/module.h>
|
|
#include <linux/miscdevice.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/bcd.h>
|
|
|
|
#include <asm/uaccess.h>
|
|
#include <asm/system.h>
|
|
#include <asm/arch/svinto.h>
|
|
#include <asm/io.h>
|
|
#include <asm/rtc.h>
|
|
#include <asm/arch/io_interface_mux.h>
|
|
|
|
#define RTC_MAJOR_NR 121 /* local major, change later */
|
|
|
|
static const char ds1302_name[] = "ds1302";
|
|
|
|
/* The DS1302 might be connected to different bits on different products.
|
|
* It has three signals - SDA, SCL and RST. RST and SCL are always outputs,
|
|
* but SDA can have a selected direction.
|
|
* For now, only PORT_PB is hardcoded.
|
|
*/
|
|
|
|
/* The RST bit may be on either the Generic Port or Port PB. */
|
|
#ifdef CONFIG_ETRAX_DS1302_RST_ON_GENERIC_PORT
|
|
#define TK_RST_OUT(x) REG_SHADOW_SET(R_PORT_G_DATA, port_g_data_shadow, CONFIG_ETRAX_DS1302_RSTBIT, x)
|
|
#define TK_RST_DIR(x)
|
|
#else
|
|
#define TK_RST_OUT(x) REG_SHADOW_SET(R_PORT_PB_DATA, port_pb_data_shadow, CONFIG_ETRAX_DS1302_RSTBIT, x)
|
|
#define TK_RST_DIR(x) REG_SHADOW_SET(R_PORT_PB_DIR, port_pb_dir_shadow, CONFIG_ETRAX_DS1302_RSTBIT, x)
|
|
#endif
|
|
|
|
|
|
#define TK_SDA_OUT(x) REG_SHADOW_SET(R_PORT_PB_DATA, port_pb_data_shadow, CONFIG_ETRAX_DS1302_SDABIT, x)
|
|
#define TK_SCL_OUT(x) REG_SHADOW_SET(R_PORT_PB_DATA, port_pb_data_shadow, CONFIG_ETRAX_DS1302_SCLBIT, x)
|
|
|
|
#define TK_SDA_IN() ((*R_PORT_PB_READ >> CONFIG_ETRAX_DS1302_SDABIT) & 1)
|
|
/* 1 is out, 0 is in */
|
|
#define TK_SDA_DIR(x) REG_SHADOW_SET(R_PORT_PB_DIR, port_pb_dir_shadow, CONFIG_ETRAX_DS1302_SDABIT, x)
|
|
#define TK_SCL_DIR(x) REG_SHADOW_SET(R_PORT_PB_DIR, port_pb_dir_shadow, CONFIG_ETRAX_DS1302_SCLBIT, x)
|
|
|
|
|
|
/*
|
|
* The reason for tempudelay and not udelay is that loops_per_usec
|
|
* (used in udelay) is not set when functions here are called from time.c
|
|
*/
|
|
|
|
static void tempudelay(int usecs)
|
|
{
|
|
volatile int loops;
|
|
|
|
for(loops = usecs * 12; loops > 0; loops--)
|
|
/* nothing */;
|
|
}
|
|
|
|
|
|
/* Send 8 bits. */
|
|
static void
|
|
out_byte(unsigned char x)
|
|
{
|
|
int i;
|
|
TK_SDA_DIR(1);
|
|
for (i = 8; i--;) {
|
|
/* The chip latches incoming bits on the rising edge of SCL. */
|
|
TK_SCL_OUT(0);
|
|
TK_SDA_OUT(x & 1);
|
|
tempudelay(1);
|
|
TK_SCL_OUT(1);
|
|
tempudelay(1);
|
|
x >>= 1;
|
|
}
|
|
TK_SDA_DIR(0);
|
|
}
|
|
|
|
static unsigned char
|
|
in_byte(void)
|
|
{
|
|
unsigned char x = 0;
|
|
int i;
|
|
|
|
/* Read byte. Bits come LSB first, on the falling edge of SCL.
|
|
* Assume SDA is in input direction already.
|
|
*/
|
|
TK_SDA_DIR(0);
|
|
|
|
for (i = 8; i--;) {
|
|
TK_SCL_OUT(0);
|
|
tempudelay(1);
|
|
x >>= 1;
|
|
x |= (TK_SDA_IN() << 7);
|
|
TK_SCL_OUT(1);
|
|
tempudelay(1);
|
|
}
|
|
|
|
return x;
|
|
}
|
|
|
|
/* Prepares for a transaction by de-activating RST (active-low). */
|
|
|
|
static void
|
|
start(void)
|
|
{
|
|
TK_SCL_OUT(0);
|
|
tempudelay(1);
|
|
TK_RST_OUT(0);
|
|
tempudelay(5);
|
|
TK_RST_OUT(1);
|
|
}
|
|
|
|
/* Ends a transaction by taking RST active again. */
|
|
|
|
static void
|
|
stop(void)
|
|
{
|
|
tempudelay(2);
|
|
TK_RST_OUT(0);
|
|
}
|
|
|
|
/* Enable writing. */
|
|
|
|
static void
|
|
ds1302_wenable(void)
|
|
{
|
|
start();
|
|
out_byte(0x8e); /* Write control register */
|
|
out_byte(0x00); /* Disable write protect bit 7 = 0 */
|
|
stop();
|
|
}
|
|
|
|
/* Disable writing. */
|
|
|
|
static void
|
|
ds1302_wdisable(void)
|
|
{
|
|
start();
|
|
out_byte(0x8e); /* Write control register */
|
|
out_byte(0x80); /* Disable write protect bit 7 = 0 */
|
|
stop();
|
|
}
|
|
|
|
|
|
|
|
/* Read a byte from the selected register in the DS1302. */
|
|
|
|
unsigned char
|
|
ds1302_readreg(int reg)
|
|
{
|
|
unsigned char x;
|
|
|
|
start();
|
|
out_byte(0x81 | (reg << 1)); /* read register */
|
|
x = in_byte();
|
|
stop();
|
|
|
|
return x;
|
|
}
|
|
|
|
/* Write a byte to the selected register. */
|
|
|
|
void
|
|
ds1302_writereg(int reg, unsigned char val)
|
|
{
|
|
#ifndef CONFIG_ETRAX_RTC_READONLY
|
|
int do_writereg = 1;
|
|
#else
|
|
int do_writereg = 0;
|
|
|
|
if (reg == RTC_TRICKLECHARGER)
|
|
do_writereg = 1;
|
|
#endif
|
|
|
|
if (do_writereg) {
|
|
ds1302_wenable();
|
|
start();
|
|
out_byte(0x80 | (reg << 1)); /* write register */
|
|
out_byte(val);
|
|
stop();
|
|
ds1302_wdisable();
|
|
}
|
|
}
|
|
|
|
void
|
|
get_rtc_time(struct rtc_time *rtc_tm)
|
|
{
|
|
unsigned long flags;
|
|
|
|
local_irq_save(flags);
|
|
|
|
rtc_tm->tm_sec = CMOS_READ(RTC_SECONDS);
|
|
rtc_tm->tm_min = CMOS_READ(RTC_MINUTES);
|
|
rtc_tm->tm_hour = CMOS_READ(RTC_HOURS);
|
|
rtc_tm->tm_mday = CMOS_READ(RTC_DAY_OF_MONTH);
|
|
rtc_tm->tm_mon = CMOS_READ(RTC_MONTH);
|
|
rtc_tm->tm_year = CMOS_READ(RTC_YEAR);
|
|
|
|
local_irq_restore(flags);
|
|
|
|
BCD_TO_BIN(rtc_tm->tm_sec);
|
|
BCD_TO_BIN(rtc_tm->tm_min);
|
|
BCD_TO_BIN(rtc_tm->tm_hour);
|
|
BCD_TO_BIN(rtc_tm->tm_mday);
|
|
BCD_TO_BIN(rtc_tm->tm_mon);
|
|
BCD_TO_BIN(rtc_tm->tm_year);
|
|
|
|
/*
|
|
* Account for differences between how the RTC uses the values
|
|
* and how they are defined in a struct rtc_time;
|
|
*/
|
|
|
|
if (rtc_tm->tm_year <= 69)
|
|
rtc_tm->tm_year += 100;
|
|
|
|
rtc_tm->tm_mon--;
|
|
}
|
|
|
|
static unsigned char days_in_mo[] =
|
|
{0, 31, 28, 31, 30, 31, 30, 31, 31, 30, 31, 30, 31};
|
|
|
|
/* ioctl that supports RTC_RD_TIME and RTC_SET_TIME (read and set time/date). */
|
|
|
|
static int
|
|
rtc_ioctl(struct inode *inode, struct file *file, unsigned int cmd,
|
|
unsigned long arg)
|
|
{
|
|
unsigned long flags;
|
|
|
|
switch(cmd) {
|
|
case RTC_RD_TIME: /* read the time/date from RTC */
|
|
{
|
|
struct rtc_time rtc_tm;
|
|
|
|
memset(&rtc_tm, 0, sizeof (struct rtc_time));
|
|
get_rtc_time(&rtc_tm);
|
|
if (copy_to_user((struct rtc_time*)arg, &rtc_tm, sizeof(struct rtc_time)))
|
|
return -EFAULT;
|
|
return 0;
|
|
}
|
|
|
|
case RTC_SET_TIME: /* set the RTC */
|
|
{
|
|
struct rtc_time rtc_tm;
|
|
unsigned char mon, day, hrs, min, sec, leap_yr;
|
|
unsigned int yrs;
|
|
|
|
if (!capable(CAP_SYS_TIME))
|
|
return -EPERM;
|
|
|
|
if (copy_from_user(&rtc_tm, (struct rtc_time*)arg, sizeof(struct rtc_time)))
|
|
return -EFAULT;
|
|
|
|
yrs = rtc_tm.tm_year + 1900;
|
|
mon = rtc_tm.tm_mon + 1; /* tm_mon starts at zero */
|
|
day = rtc_tm.tm_mday;
|
|
hrs = rtc_tm.tm_hour;
|
|
min = rtc_tm.tm_min;
|
|
sec = rtc_tm.tm_sec;
|
|
|
|
|
|
if ((yrs < 1970) || (yrs > 2069))
|
|
return -EINVAL;
|
|
|
|
leap_yr = ((!(yrs % 4) && (yrs % 100)) || !(yrs % 400));
|
|
|
|
if ((mon > 12) || (day == 0))
|
|
return -EINVAL;
|
|
|
|
if (day > (days_in_mo[mon] + ((mon == 2) && leap_yr)))
|
|
return -EINVAL;
|
|
|
|
if ((hrs >= 24) || (min >= 60) || (sec >= 60))
|
|
return -EINVAL;
|
|
|
|
if (yrs >= 2000)
|
|
yrs -= 2000; /* RTC (0, 1, ... 69) */
|
|
else
|
|
yrs -= 1900; /* RTC (70, 71, ... 99) */
|
|
|
|
BIN_TO_BCD(sec);
|
|
BIN_TO_BCD(min);
|
|
BIN_TO_BCD(hrs);
|
|
BIN_TO_BCD(day);
|
|
BIN_TO_BCD(mon);
|
|
BIN_TO_BCD(yrs);
|
|
|
|
local_irq_save(flags);
|
|
CMOS_WRITE(yrs, RTC_YEAR);
|
|
CMOS_WRITE(mon, RTC_MONTH);
|
|
CMOS_WRITE(day, RTC_DAY_OF_MONTH);
|
|
CMOS_WRITE(hrs, RTC_HOURS);
|
|
CMOS_WRITE(min, RTC_MINUTES);
|
|
CMOS_WRITE(sec, RTC_SECONDS);
|
|
local_irq_restore(flags);
|
|
|
|
/* Notice that at this point, the RTC is updated but
|
|
* the kernel is still running with the old time.
|
|
* You need to set that separately with settimeofday
|
|
* or adjtimex.
|
|
*/
|
|
return 0;
|
|
}
|
|
|
|
case RTC_SET_CHARGE: /* set the RTC TRICKLE CHARGE register */
|
|
{
|
|
int tcs_val;
|
|
|
|
if (!capable(CAP_SYS_TIME))
|
|
return -EPERM;
|
|
|
|
if(copy_from_user(&tcs_val, (int*)arg, sizeof(int)))
|
|
return -EFAULT;
|
|
|
|
tcs_val = RTC_TCR_PATTERN | (tcs_val & 0x0F);
|
|
ds1302_writereg(RTC_TRICKLECHARGER, tcs_val);
|
|
return 0;
|
|
}
|
|
case RTC_VLOW_RD:
|
|
{
|
|
/* TODO:
|
|
* Implement voltage low detection support
|
|
*/
|
|
printk(KERN_WARNING "DS1302: RTC Voltage Low detection"
|
|
" is not supported\n");
|
|
return 0;
|
|
}
|
|
case RTC_VLOW_SET:
|
|
{
|
|
/* TODO:
|
|
* Nothing to do since Voltage Low detection is not supported
|
|
*/
|
|
return 0;
|
|
}
|
|
default:
|
|
return -ENOIOCTLCMD;
|
|
}
|
|
}
|
|
|
|
static void
|
|
print_rtc_status(void)
|
|
{
|
|
struct rtc_time tm;
|
|
|
|
get_rtc_time(&tm);
|
|
|
|
/*
|
|
* There is no way to tell if the luser has the RTC set for local
|
|
* time or for Universal Standard Time (GMT). Probably local though.
|
|
*/
|
|
|
|
printk(KERN_INFO "rtc_time\t: %02d:%02d:%02d\n",
|
|
tm.tm_hour, tm.tm_min, tm.tm_sec);
|
|
printk(KERN_INFO "rtc_date\t: %04d-%02d-%02d\n",
|
|
tm.tm_year + 1900, tm.tm_mon + 1, tm.tm_mday);
|
|
}
|
|
|
|
/* The various file operations we support. */
|
|
|
|
static struct file_operations rtc_fops = {
|
|
.owner = THIS_MODULE,
|
|
.ioctl = rtc_ioctl,
|
|
};
|
|
|
|
/* Probe for the chip by writing something to its RAM and try reading it back. */
|
|
|
|
#define MAGIC_PATTERN 0x42
|
|
|
|
static int __init
|
|
ds1302_probe(void)
|
|
{
|
|
int retval, res;
|
|
|
|
TK_RST_DIR(1);
|
|
TK_SCL_DIR(1);
|
|
TK_SDA_DIR(0);
|
|
|
|
/* Try to talk to timekeeper. */
|
|
|
|
ds1302_wenable();
|
|
start();
|
|
out_byte(0xc0); /* write RAM byte 0 */
|
|
out_byte(MAGIC_PATTERN); /* write something magic */
|
|
start();
|
|
out_byte(0xc1); /* read RAM byte 0 */
|
|
|
|
if((res = in_byte()) == MAGIC_PATTERN) {
|
|
stop();
|
|
ds1302_wdisable();
|
|
printk(KERN_INFO "%s: RTC found.\n", ds1302_name);
|
|
printk(KERN_INFO "%s: SDA, SCL, RST on PB%i, PB%i, %s%i\n",
|
|
ds1302_name,
|
|
CONFIG_ETRAX_DS1302_SDABIT,
|
|
CONFIG_ETRAX_DS1302_SCLBIT,
|
|
#ifdef CONFIG_ETRAX_DS1302_RST_ON_GENERIC_PORT
|
|
"GENIO",
|
|
#else
|
|
"PB",
|
|
#endif
|
|
CONFIG_ETRAX_DS1302_RSTBIT);
|
|
print_rtc_status();
|
|
retval = 1;
|
|
} else {
|
|
stop();
|
|
retval = 0;
|
|
}
|
|
|
|
return retval;
|
|
}
|
|
|
|
|
|
/* Just probe for the RTC and register the device to handle the ioctl needed. */
|
|
|
|
int __init
|
|
ds1302_init(void)
|
|
{
|
|
#ifdef CONFIG_ETRAX_I2C
|
|
i2c_init();
|
|
#endif
|
|
|
|
if (!ds1302_probe()) {
|
|
#ifdef CONFIG_ETRAX_DS1302_RST_ON_GENERIC_PORT
|
|
#if CONFIG_ETRAX_DS1302_RSTBIT == 27
|
|
/*
|
|
* The only way to set g27 to output is to enable ATA.
|
|
*
|
|
* Make sure that R_GEN_CONFIG is setup correct.
|
|
*/
|
|
/* Allocating the ATA interface will grab almost all
|
|
* pins in I/O groups a, b, c and d. A consequence of
|
|
* allocating the ATA interface is that the fixed
|
|
* interfaces shared RAM, parallel port 0, parallel
|
|
* port 1, parallel port W, SCSI-8 port 0, SCSI-8 port
|
|
* 1, SCSI-W, serial port 2, serial port 3,
|
|
* synchronous serial port 3 and USB port 2 and almost
|
|
* all GPIO pins on port g cannot be used.
|
|
*/
|
|
if (cris_request_io_interface(if_ata, "ds1302/ATA")) {
|
|
printk(KERN_WARNING "ds1302: Failed to get IO interface\n");
|
|
return -1;
|
|
}
|
|
|
|
#elif CONFIG_ETRAX_DS1302_RSTBIT == 0
|
|
if (cris_io_interface_allocate_pins(if_gpio_grp_a,
|
|
'g',
|
|
CONFIG_ETRAX_DS1302_RSTBIT,
|
|
CONFIG_ETRAX_DS1302_RSTBIT)) {
|
|
printk(KERN_WARNING "ds1302: Failed to get IO interface\n");
|
|
return -1;
|
|
}
|
|
|
|
/* Set the direction of this bit to out. */
|
|
genconfig_shadow = ((genconfig_shadow &
|
|
~IO_MASK(R_GEN_CONFIG, g0dir)) |
|
|
(IO_STATE(R_GEN_CONFIG, g0dir, out)));
|
|
*R_GEN_CONFIG = genconfig_shadow;
|
|
#endif
|
|
if (!ds1302_probe()) {
|
|
printk(KERN_WARNING "%s: RTC not found.\n", ds1302_name);
|
|
return -1;
|
|
}
|
|
#else
|
|
printk(KERN_WARNING "%s: RTC not found.\n", ds1302_name);
|
|
return -1;
|
|
#endif
|
|
}
|
|
/* Initialise trickle charger */
|
|
ds1302_writereg(RTC_TRICKLECHARGER,
|
|
RTC_TCR_PATTERN |(CONFIG_ETRAX_DS1302_TRICKLE_CHARGE & 0x0F));
|
|
/* Start clock by resetting CLOCK_HALT */
|
|
ds1302_writereg(RTC_SECONDS, (ds1302_readreg(RTC_SECONDS) & 0x7F));
|
|
return 0;
|
|
}
|
|
|
|
static int __init ds1302_register(void)
|
|
{
|
|
ds1302_init();
|
|
if (register_chrdev(RTC_MAJOR_NR, ds1302_name, &rtc_fops)) {
|
|
printk(KERN_INFO "%s: unable to get major %d for rtc\n",
|
|
ds1302_name, RTC_MAJOR_NR);
|
|
return -1;
|
|
}
|
|
return 0;
|
|
|
|
}
|
|
|
|
module_init(ds1302_register);
|