145 lines
4.8 KiB
Plaintext
145 lines
4.8 KiB
Plaintext
* Freescale 83xx DMA Controller
|
|
|
|
Freescale PowerPC 83xx have on chip general purpose DMA controllers.
|
|
|
|
Required properties:
|
|
|
|
- compatible : compatible list, contains 2 entries, first is
|
|
"fsl,CHIP-dma", where CHIP is the processor
|
|
(mpc8349, mpc8360, etc.) and the second is
|
|
"fsl,elo-dma"
|
|
- reg : <registers mapping for DMA general status reg>
|
|
- ranges : Should be defined as specified in 1) to describe the
|
|
DMA controller channels.
|
|
- cell-index : controller index. 0 for controller @ 0x8100
|
|
- interrupts : <interrupt mapping for DMA IRQ>
|
|
- interrupt-parent : optional, if needed for interrupt mapping
|
|
|
|
|
|
- DMA channel nodes:
|
|
- compatible : compatible list, contains 2 entries, first is
|
|
"fsl,CHIP-dma-channel", where CHIP is the processor
|
|
(mpc8349, mpc8350, etc.) and the second is
|
|
"fsl,elo-dma-channel". However, see note below.
|
|
- reg : <registers mapping for channel>
|
|
- cell-index : dma channel index starts at 0.
|
|
|
|
Optional properties:
|
|
- interrupts : <interrupt mapping for DMA channel IRQ>
|
|
(on 83xx this is expected to be identical to
|
|
the interrupts property of the parent node)
|
|
- interrupt-parent : optional, if needed for interrupt mapping
|
|
|
|
Example:
|
|
dma@82a8 {
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
compatible = "fsl,mpc8349-dma", "fsl,elo-dma";
|
|
reg = <0x82a8 4>;
|
|
ranges = <0 0x8100 0x1a4>;
|
|
interrupt-parent = <&ipic>;
|
|
interrupts = <71 8>;
|
|
cell-index = <0>;
|
|
dma-channel@0 {
|
|
compatible = "fsl,mpc8349-dma-channel", "fsl,elo-dma-channel";
|
|
cell-index = <0>;
|
|
reg = <0 0x80>;
|
|
interrupt-parent = <&ipic>;
|
|
interrupts = <71 8>;
|
|
};
|
|
dma-channel@80 {
|
|
compatible = "fsl,mpc8349-dma-channel", "fsl,elo-dma-channel";
|
|
cell-index = <1>;
|
|
reg = <0x80 0x80>;
|
|
interrupt-parent = <&ipic>;
|
|
interrupts = <71 8>;
|
|
};
|
|
dma-channel@100 {
|
|
compatible = "fsl,mpc8349-dma-channel", "fsl,elo-dma-channel";
|
|
cell-index = <2>;
|
|
reg = <0x100 0x80>;
|
|
interrupt-parent = <&ipic>;
|
|
interrupts = <71 8>;
|
|
};
|
|
dma-channel@180 {
|
|
compatible = "fsl,mpc8349-dma-channel", "fsl,elo-dma-channel";
|
|
cell-index = <3>;
|
|
reg = <0x180 0x80>;
|
|
interrupt-parent = <&ipic>;
|
|
interrupts = <71 8>;
|
|
};
|
|
};
|
|
|
|
* Freescale 85xx/86xx DMA Controller
|
|
|
|
Freescale PowerPC 85xx/86xx have on chip general purpose DMA controllers.
|
|
|
|
Required properties:
|
|
|
|
- compatible : compatible list, contains 2 entries, first is
|
|
"fsl,CHIP-dma", where CHIP is the processor
|
|
(mpc8540, mpc8540, etc.) and the second is
|
|
"fsl,eloplus-dma"
|
|
- reg : <registers mapping for DMA general status reg>
|
|
- cell-index : controller index. 0 for controller @ 0x21000,
|
|
1 for controller @ 0xc000
|
|
- ranges : Should be defined as specified in 1) to describe the
|
|
DMA controller channels.
|
|
|
|
- DMA channel nodes:
|
|
- compatible : compatible list, contains 2 entries, first is
|
|
"fsl,CHIP-dma-channel", where CHIP is the processor
|
|
(mpc8540, mpc8560, etc.) and the second is
|
|
"fsl,eloplus-dma-channel". However, see note below.
|
|
- cell-index : dma channel index starts at 0.
|
|
- reg : <registers mapping for channel>
|
|
- interrupts : <interrupt mapping for DMA channel IRQ>
|
|
- interrupt-parent : optional, if needed for interrupt mapping
|
|
|
|
Example:
|
|
dma@21300 {
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
compatible = "fsl,mpc8540-dma", "fsl,eloplus-dma";
|
|
reg = <0x21300 4>;
|
|
ranges = <0 0x21100 0x200>;
|
|
cell-index = <0>;
|
|
dma-channel@0 {
|
|
compatible = "fsl,mpc8540-dma-channel", "fsl,eloplus-dma-channel";
|
|
reg = <0 0x80>;
|
|
cell-index = <0>;
|
|
interrupt-parent = <&mpic>;
|
|
interrupts = <20 2>;
|
|
};
|
|
dma-channel@80 {
|
|
compatible = "fsl,mpc8540-dma-channel", "fsl,eloplus-dma-channel";
|
|
reg = <0x80 0x80>;
|
|
cell-index = <1>;
|
|
interrupt-parent = <&mpic>;
|
|
interrupts = <21 2>;
|
|
};
|
|
dma-channel@100 {
|
|
compatible = "fsl,mpc8540-dma-channel", "fsl,eloplus-dma-channel";
|
|
reg = <0x100 0x80>;
|
|
cell-index = <2>;
|
|
interrupt-parent = <&mpic>;
|
|
interrupts = <22 2>;
|
|
};
|
|
dma-channel@180 {
|
|
compatible = "fsl,mpc8540-dma-channel", "fsl,eloplus-dma-channel";
|
|
reg = <0x180 0x80>;
|
|
cell-index = <3>;
|
|
interrupt-parent = <&mpic>;
|
|
interrupts = <23 2>;
|
|
};
|
|
};
|
|
|
|
Note on DMA channel compatible properties: The compatible property must say
|
|
"fsl,elo-dma-channel" or "fsl,eloplus-dma-channel" to be used by the Elo DMA
|
|
driver (fsldma). Any DMA channel used by fsldma cannot be used by another
|
|
DMA driver, such as the SSI sound drivers for the MPC8610. Therefore, any DMA
|
|
channel that should be used for another driver should not use
|
|
"fsl,elo-dma-channel" or "fsl,eloplus-dma-channel". For the SSI drivers, for
|
|
example, the compatible property should be "fsl,ssi-dma-channel". See ssi.txt
|
|
for more information.
|