603 lines
16 KiB
C
603 lines
16 KiB
C
/*
|
|
* arch/ppc/platform/85xx/mpc85xx_cds_common.c
|
|
*
|
|
* MPC85xx CDS board specific routines
|
|
*
|
|
* Maintainer: Kumar Gala <kumar.gala@freescale.com>
|
|
*
|
|
* Copyright 2004 Freescale Semiconductor, Inc
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify it
|
|
* under the terms of the GNU General Public License as published by the
|
|
* Free Software Foundation; either version 2 of the License, or (at your
|
|
* option) any later version.
|
|
*/
|
|
|
|
#include <linux/config.h>
|
|
#include <linux/stddef.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/init.h>
|
|
#include <linux/errno.h>
|
|
#include <linux/reboot.h>
|
|
#include <linux/pci.h>
|
|
#include <linux/kdev_t.h>
|
|
#include <linux/major.h>
|
|
#include <linux/console.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/seq_file.h>
|
|
#include <linux/serial.h>
|
|
#include <linux/module.h>
|
|
#include <linux/root_dev.h>
|
|
#include <linux/initrd.h>
|
|
#include <linux/tty.h>
|
|
#include <linux/serial_core.h>
|
|
#include <linux/fsl_devices.h>
|
|
|
|
#include <asm/system.h>
|
|
#include <asm/pgtable.h>
|
|
#include <asm/page.h>
|
|
#include <asm/atomic.h>
|
|
#include <asm/time.h>
|
|
#include <asm/todc.h>
|
|
#include <asm/io.h>
|
|
#include <asm/machdep.h>
|
|
#include <asm/open_pic.h>
|
|
#include <asm/i8259.h>
|
|
#include <asm/bootinfo.h>
|
|
#include <asm/pci-bridge.h>
|
|
#include <asm/mpc85xx.h>
|
|
#include <asm/irq.h>
|
|
#include <asm/immap_85xx.h>
|
|
#include <asm/cpm2.h>
|
|
#include <asm/ppc_sys.h>
|
|
#include <asm/kgdb.h>
|
|
|
|
#include <mm/mmu_decl.h>
|
|
#include <syslib/cpm2_pic.h>
|
|
#include <syslib/ppc85xx_common.h>
|
|
#include <syslib/ppc85xx_setup.h>
|
|
|
|
|
|
#ifndef CONFIG_PCI
|
|
unsigned long isa_io_base = 0;
|
|
unsigned long isa_mem_base = 0;
|
|
#endif
|
|
|
|
extern unsigned long total_memory; /* in mm/init */
|
|
|
|
unsigned char __res[sizeof (bd_t)];
|
|
|
|
static int cds_pci_slot = 2;
|
|
static volatile u8 * cadmus;
|
|
|
|
/* Internal interrupts are all Level Sensitive, and Positive Polarity */
|
|
static u_char mpc85xx_cds_openpic_initsenses[] __initdata = {
|
|
MPC85XX_INTERNAL_IRQ_SENSES,
|
|
#if defined(CONFIG_PCI)
|
|
(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* External 0: PCI1 slot */
|
|
(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* External 1: PCI1 slot */
|
|
(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* External 2: PCI1 slot */
|
|
(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* External 3: PCI1 slot */
|
|
#else
|
|
0x0, /* External 0: */
|
|
0x0, /* External 1: */
|
|
0x0, /* External 2: */
|
|
0x0, /* External 3: */
|
|
#endif
|
|
0x0, /* External 4: */
|
|
(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* External 5: PHY */
|
|
0x0, /* External 6: */
|
|
0x0, /* External 7: */
|
|
0x0, /* External 8: */
|
|
0x0, /* External 9: */
|
|
0x0, /* External 10: */
|
|
#if defined(CONFIG_85xx_PCI2) && defined(CONFIG_PCI)
|
|
(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* External 11: PCI2 slot 0 */
|
|
#else
|
|
0x0, /* External 11: */
|
|
#endif
|
|
};
|
|
|
|
/* ************************************************************************ */
|
|
int
|
|
mpc85xx_cds_show_cpuinfo(struct seq_file *m)
|
|
{
|
|
uint pvid, svid, phid1;
|
|
uint memsize = total_memory;
|
|
bd_t *binfo = (bd_t *) __res;
|
|
unsigned int freq;
|
|
|
|
/* get the core frequency */
|
|
freq = binfo->bi_intfreq;
|
|
|
|
pvid = mfspr(SPRN_PVR);
|
|
svid = mfspr(SPRN_SVR);
|
|
|
|
seq_printf(m, "Vendor\t\t: Freescale Semiconductor\n");
|
|
seq_printf(m, "Machine\t\t: CDS - MPC%s (%x)\n", cur_ppc_sys_spec->ppc_sys_name, cadmus[CM_VER]);
|
|
seq_printf(m, "clock\t\t: %dMHz\n", freq / 1000000);
|
|
seq_printf(m, "PVR\t\t: 0x%x\n", pvid);
|
|
seq_printf(m, "SVR\t\t: 0x%x\n", svid);
|
|
|
|
/* Display cpu Pll setting */
|
|
phid1 = mfspr(SPRN_HID1);
|
|
seq_printf(m, "PLL setting\t: 0x%x\n", ((phid1 >> 24) & 0x3f));
|
|
|
|
/* Display the amount of memory */
|
|
seq_printf(m, "Memory\t\t: %d MB\n", memsize / (1024 * 1024));
|
|
|
|
return 0;
|
|
}
|
|
|
|
#ifdef CONFIG_CPM2
|
|
static void cpm2_cascade(int irq, void *dev_id, struct pt_regs *regs)
|
|
{
|
|
while((irq = cpm2_get_irq(regs)) >= 0)
|
|
__do_IRQ(irq, regs);
|
|
}
|
|
|
|
static struct irqaction cpm2_irqaction = {
|
|
.handler = cpm2_cascade,
|
|
.flags = SA_INTERRUPT,
|
|
.mask = CPU_MASK_NONE,
|
|
.name = "cpm2_cascade",
|
|
};
|
|
#endif /* CONFIG_CPM2 */
|
|
|
|
void __init
|
|
mpc85xx_cds_init_IRQ(void)
|
|
{
|
|
bd_t *binfo = (bd_t *) __res;
|
|
int i;
|
|
|
|
/* Determine the Physical Address of the OpenPIC regs */
|
|
phys_addr_t OpenPIC_PAddr = binfo->bi_immr_base + MPC85xx_OPENPIC_OFFSET;
|
|
OpenPIC_Addr = ioremap(OpenPIC_PAddr, MPC85xx_OPENPIC_SIZE);
|
|
OpenPIC_InitSenses = mpc85xx_cds_openpic_initsenses;
|
|
OpenPIC_NumInitSenses = sizeof (mpc85xx_cds_openpic_initsenses);
|
|
|
|
/* Skip reserved space and internal sources */
|
|
#ifdef CONFIG_MPC8548
|
|
openpic_set_sources(0, 48, OpenPIC_Addr + 0x10200);
|
|
#else
|
|
openpic_set_sources(0, 32, OpenPIC_Addr + 0x10200);
|
|
#endif
|
|
/* Map PIC IRQs 0-11 */
|
|
openpic_set_sources(48, 12, OpenPIC_Addr + 0x10000);
|
|
|
|
/* we let openpic interrupts starting from an offset, to
|
|
* leave space for cascading interrupts underneath.
|
|
*/
|
|
openpic_init(MPC85xx_OPENPIC_IRQ_OFFSET);
|
|
|
|
#ifdef CONFIG_PCI
|
|
openpic_hookup_cascade(PIRQ0A, "82c59 cascade", i8259_irq);
|
|
|
|
for (i = 0; i < NUM_8259_INTERRUPTS; i++)
|
|
irq_desc[i].handler = &i8259_pic;
|
|
|
|
i8259_init(0);
|
|
#endif
|
|
|
|
#ifdef CONFIG_CPM2
|
|
/* Setup CPM2 PIC */
|
|
cpm2_init_IRQ();
|
|
|
|
setup_irq(MPC85xx_IRQ_CPM, &cpm2_irqaction);
|
|
#endif
|
|
|
|
return;
|
|
}
|
|
|
|
#ifdef CONFIG_PCI
|
|
/*
|
|
* interrupt routing
|
|
*/
|
|
int
|
|
mpc85xx_map_irq(struct pci_dev *dev, unsigned char idsel, unsigned char pin)
|
|
{
|
|
struct pci_controller *hose = pci_bus_to_hose(dev->bus->number);
|
|
|
|
if (!hose->index)
|
|
{
|
|
/* Handle PCI1 interrupts */
|
|
char pci_irq_table[][4] =
|
|
/*
|
|
* PCI IDSEL/INTPIN->INTLINE
|
|
* A B C D
|
|
*/
|
|
|
|
/* Note IRQ assignment for slots is based on which slot the elysium is
|
|
* in -- in this setup elysium is in slot #2 (this PIRQA as first
|
|
* interrupt on slot */
|
|
{
|
|
{ 0, 1, 2, 3 }, /* 16 - PMC */
|
|
{ 0, 1, 2, 3 }, /* 17 P2P (Tsi320) */
|
|
{ 0, 1, 2, 3 }, /* 18 - Slot 1 */
|
|
{ 1, 2, 3, 0 }, /* 19 - Slot 2 */
|
|
{ 2, 3, 0, 1 }, /* 20 - Slot 3 */
|
|
{ 3, 0, 1, 2 }, /* 21 - Slot 4 */
|
|
};
|
|
|
|
const long min_idsel = 16, max_idsel = 21, irqs_per_slot = 4;
|
|
int i, j;
|
|
|
|
for (i = 0; i < 6; i++)
|
|
for (j = 0; j < 4; j++)
|
|
pci_irq_table[i][j] =
|
|
((pci_irq_table[i][j] + 5 -
|
|
cds_pci_slot) & 0x3) + PIRQ0A;
|
|
|
|
return PCI_IRQ_TABLE_LOOKUP;
|
|
} else {
|
|
/* Handle PCI2 interrupts (if we have one) */
|
|
char pci_irq_table[][4] =
|
|
{
|
|
/*
|
|
* We only have one slot and one interrupt
|
|
* going to PIRQA - PIRQD */
|
|
{ PIRQ1A, PIRQ1A, PIRQ1A, PIRQ1A }, /* 21 - slot 0 */
|
|
};
|
|
|
|
const long min_idsel = 21, max_idsel = 21, irqs_per_slot = 4;
|
|
|
|
return PCI_IRQ_TABLE_LOOKUP;
|
|
}
|
|
}
|
|
|
|
#define ARCADIA_HOST_BRIDGE_IDSEL 17
|
|
#define ARCADIA_2ND_BRIDGE_IDSEL 3
|
|
|
|
extern int mpc85xx_pci1_last_busno;
|
|
|
|
int
|
|
mpc85xx_exclude_device(u_char bus, u_char devfn)
|
|
{
|
|
if (bus == 0 && PCI_SLOT(devfn) == 0)
|
|
return PCIBIOS_DEVICE_NOT_FOUND;
|
|
#ifdef CONFIG_85xx_PCI2
|
|
if (mpc85xx_pci1_last_busno)
|
|
if (bus == (mpc85xx_pci1_last_busno + 1) && PCI_SLOT(devfn) == 0)
|
|
return PCIBIOS_DEVICE_NOT_FOUND;
|
|
#endif
|
|
/* We explicitly do not go past the Tundra 320 Bridge */
|
|
if ((bus == 1) && (PCI_SLOT(devfn) == ARCADIA_2ND_BRIDGE_IDSEL))
|
|
return PCIBIOS_DEVICE_NOT_FOUND;
|
|
if ((bus == 0) && (PCI_SLOT(devfn) == ARCADIA_2ND_BRIDGE_IDSEL))
|
|
return PCIBIOS_DEVICE_NOT_FOUND;
|
|
else
|
|
return PCIBIOS_SUCCESSFUL;
|
|
}
|
|
|
|
void __init
|
|
mpc85xx_cds_enable_via(struct pci_controller *hose)
|
|
{
|
|
u32 pci_class;
|
|
u16 vid, did;
|
|
|
|
early_read_config_dword(hose, 0, 0x88, PCI_CLASS_REVISION, &pci_class);
|
|
if ((pci_class >> 16) != PCI_CLASS_BRIDGE_PCI)
|
|
return;
|
|
|
|
/* Configure P2P so that we can reach bus 1 */
|
|
early_write_config_byte(hose, 0, 0x88, PCI_PRIMARY_BUS, 0);
|
|
early_write_config_byte(hose, 0, 0x88, PCI_SECONDARY_BUS, 1);
|
|
early_write_config_byte(hose, 0, 0x88, PCI_SUBORDINATE_BUS, 0xff);
|
|
|
|
early_read_config_word(hose, 1, 0x10, PCI_VENDOR_ID, &vid);
|
|
early_read_config_word(hose, 1, 0x10, PCI_DEVICE_ID, &did);
|
|
|
|
if ((vid != PCI_VENDOR_ID_VIA) ||
|
|
(did != PCI_DEVICE_ID_VIA_82C686))
|
|
return;
|
|
|
|
/* Enable USB and IDE functions */
|
|
early_write_config_byte(hose, 1, 0x10, 0x48, 0x08);
|
|
}
|
|
|
|
void __init
|
|
mpc85xx_cds_fixup_via(struct pci_controller *hose)
|
|
{
|
|
u32 pci_class;
|
|
u16 vid, did;
|
|
|
|
early_read_config_dword(hose, 0, 0x88, PCI_CLASS_REVISION, &pci_class);
|
|
if ((pci_class >> 16) != PCI_CLASS_BRIDGE_PCI)
|
|
return;
|
|
|
|
/*
|
|
* Force the backplane P2P bridge to have a window
|
|
* open from 0x00000000-0x00001fff in PCI I/O space.
|
|
* This allows legacy I/O (i8259, etc) on the VIA
|
|
* southbridge to be accessed.
|
|
*/
|
|
early_write_config_byte(hose, 0, 0x88, PCI_IO_BASE, 0x00);
|
|
early_write_config_word(hose, 0, 0x88, PCI_IO_BASE_UPPER16, 0x0000);
|
|
early_write_config_byte(hose, 0, 0x88, PCI_IO_LIMIT, 0x10);
|
|
early_write_config_word(hose, 0, 0x88, PCI_IO_LIMIT_UPPER16, 0x0000);
|
|
|
|
early_read_config_word(hose, 1, 0x10, PCI_VENDOR_ID, &vid);
|
|
early_read_config_word(hose, 1, 0x10, PCI_DEVICE_ID, &did);
|
|
if ((vid != PCI_VENDOR_ID_VIA) ||
|
|
(did != PCI_DEVICE_ID_VIA_82C686))
|
|
return;
|
|
|
|
/*
|
|
* Since the P2P window was forced to cover the fixed
|
|
* legacy I/O addresses, it is necessary to manually
|
|
* place the base addresses for the IDE and USB functions
|
|
* within this window.
|
|
*/
|
|
/* Function 1, IDE */
|
|
early_write_config_dword(hose, 1, 0x11, PCI_BASE_ADDRESS_0, 0x1ff8);
|
|
early_write_config_dword(hose, 1, 0x11, PCI_BASE_ADDRESS_1, 0x1ff4);
|
|
early_write_config_dword(hose, 1, 0x11, PCI_BASE_ADDRESS_2, 0x1fe8);
|
|
early_write_config_dword(hose, 1, 0x11, PCI_BASE_ADDRESS_3, 0x1fe4);
|
|
early_write_config_dword(hose, 1, 0x11, PCI_BASE_ADDRESS_4, 0x1fd0);
|
|
|
|
/* Function 2, USB ports 0-1 */
|
|
early_write_config_dword(hose, 1, 0x12, PCI_BASE_ADDRESS_4, 0x1fa0);
|
|
|
|
/* Function 3, USB ports 2-3 */
|
|
early_write_config_dword(hose, 1, 0x13, PCI_BASE_ADDRESS_4, 0x1f80);
|
|
|
|
/* Function 5, Power Management */
|
|
early_write_config_dword(hose, 1, 0x15, PCI_BASE_ADDRESS_0, 0x1e00);
|
|
early_write_config_dword(hose, 1, 0x15, PCI_BASE_ADDRESS_1, 0x1dfc);
|
|
early_write_config_dword(hose, 1, 0x15, PCI_BASE_ADDRESS_2, 0x1df8);
|
|
|
|
/* Function 6, AC97 Interface */
|
|
early_write_config_dword(hose, 1, 0x16, PCI_BASE_ADDRESS_0, 0x1c00);
|
|
}
|
|
|
|
void __init
|
|
mpc85xx_cds_pcibios_fixup(void)
|
|
{
|
|
struct pci_dev *dev = NULL;
|
|
u_char c;
|
|
|
|
if ((dev = pci_find_device(PCI_VENDOR_ID_VIA,
|
|
PCI_DEVICE_ID_VIA_82C586_1, NULL))) {
|
|
/*
|
|
* U-Boot does not set the enable bits
|
|
* for the IDE device. Force them on here.
|
|
*/
|
|
pci_read_config_byte(dev, 0x40, &c);
|
|
c |= 0x03; /* IDE: Chip Enable Bits */
|
|
pci_write_config_byte(dev, 0x40, c);
|
|
|
|
/*
|
|
* Since only primary interface works, force the
|
|
* IDE function to standard primary IDE interrupt
|
|
* w/ 8259 offset
|
|
*/
|
|
dev->irq = 14;
|
|
pci_write_config_byte(dev, PCI_INTERRUPT_LINE, dev->irq);
|
|
}
|
|
|
|
/*
|
|
* Force legacy USB interrupt routing
|
|
*/
|
|
if ((dev = pci_find_device(PCI_VENDOR_ID_VIA,
|
|
PCI_DEVICE_ID_VIA_82C586_2, NULL))) {
|
|
dev->irq = 10;
|
|
pci_write_config_byte(dev, PCI_INTERRUPT_LINE, 10);
|
|
}
|
|
|
|
if ((dev = pci_find_device(PCI_VENDOR_ID_VIA,
|
|
PCI_DEVICE_ID_VIA_82C586_2, dev))) {
|
|
dev->irq = 11;
|
|
pci_write_config_byte(dev, PCI_INTERRUPT_LINE, 11);
|
|
}
|
|
}
|
|
#endif /* CONFIG_PCI */
|
|
|
|
TODC_ALLOC();
|
|
|
|
/* ************************************************************************
|
|
*
|
|
* Setup the architecture
|
|
*
|
|
*/
|
|
static void __init
|
|
mpc85xx_cds_setup_arch(void)
|
|
{
|
|
bd_t *binfo = (bd_t *) __res;
|
|
unsigned int freq;
|
|
struct gianfar_platform_data *pdata;
|
|
|
|
/* get the core frequency */
|
|
freq = binfo->bi_intfreq;
|
|
|
|
printk("mpc85xx_cds_setup_arch\n");
|
|
|
|
#ifdef CONFIG_CPM2
|
|
cpm2_reset();
|
|
#endif
|
|
|
|
cadmus = ioremap(CADMUS_BASE, CADMUS_SIZE);
|
|
cds_pci_slot = ((cadmus[CM_CSR] >> 6) & 0x3) + 1;
|
|
printk("CDS Version = %x in PCI slot %d\n", cadmus[CM_VER], cds_pci_slot);
|
|
|
|
/* Setup TODC access */
|
|
TODC_INIT(TODC_TYPE_DS1743,
|
|
0,
|
|
0,
|
|
ioremap(CDS_RTC_ADDR, CDS_RTC_SIZE),
|
|
8);
|
|
|
|
/* Set loops_per_jiffy to a half-way reasonable value,
|
|
for use until calibrate_delay gets called. */
|
|
loops_per_jiffy = freq / HZ;
|
|
|
|
#ifdef CONFIG_PCI
|
|
/* VIA IDE configuration */
|
|
ppc_md.pcibios_fixup = mpc85xx_cds_pcibios_fixup;
|
|
|
|
/* setup PCI host bridges */
|
|
mpc85xx_setup_hose();
|
|
#endif
|
|
|
|
#ifdef CONFIG_SERIAL_8250
|
|
mpc85xx_early_serial_map();
|
|
#endif
|
|
|
|
#ifdef CONFIG_SERIAL_TEXT_DEBUG
|
|
/* Invalidate the entry we stole earlier the serial ports
|
|
* should be properly mapped */
|
|
invalidate_tlbcam_entry(num_tlbcam_entries - 1);
|
|
#endif
|
|
|
|
/* setup the board related information for the enet controllers */
|
|
pdata = (struct gianfar_platform_data *) ppc_sys_get_pdata(MPC85xx_TSEC1);
|
|
if (pdata) {
|
|
pdata->board_flags = FSL_GIANFAR_BRD_HAS_PHY_INTR;
|
|
pdata->interruptPHY = MPC85xx_IRQ_EXT5;
|
|
pdata->phyid = 0;
|
|
/* fixup phy address */
|
|
pdata->phy_reg_addr += binfo->bi_immr_base;
|
|
memcpy(pdata->mac_addr, binfo->bi_enetaddr, 6);
|
|
}
|
|
|
|
pdata = (struct gianfar_platform_data *) ppc_sys_get_pdata(MPC85xx_TSEC2);
|
|
if (pdata) {
|
|
pdata->board_flags = FSL_GIANFAR_BRD_HAS_PHY_INTR;
|
|
pdata->interruptPHY = MPC85xx_IRQ_EXT5;
|
|
pdata->phyid = 1;
|
|
/* fixup phy address */
|
|
pdata->phy_reg_addr += binfo->bi_immr_base;
|
|
memcpy(pdata->mac_addr, binfo->bi_enet1addr, 6);
|
|
}
|
|
|
|
pdata = (struct gianfar_platform_data *) ppc_sys_get_pdata(MPC85xx_eTSEC1);
|
|
if (pdata) {
|
|
pdata->board_flags = FSL_GIANFAR_BRD_HAS_PHY_INTR;
|
|
pdata->interruptPHY = MPC85xx_IRQ_EXT5;
|
|
pdata->phyid = 0;
|
|
/* fixup phy address */
|
|
pdata->phy_reg_addr += binfo->bi_immr_base;
|
|
memcpy(pdata->mac_addr, binfo->bi_enetaddr, 6);
|
|
}
|
|
|
|
pdata = (struct gianfar_platform_data *) ppc_sys_get_pdata(MPC85xx_eTSEC2);
|
|
if (pdata) {
|
|
pdata->board_flags = FSL_GIANFAR_BRD_HAS_PHY_INTR;
|
|
pdata->interruptPHY = MPC85xx_IRQ_EXT5;
|
|
pdata->phyid = 1;
|
|
/* fixup phy address */
|
|
pdata->phy_reg_addr += binfo->bi_immr_base;
|
|
memcpy(pdata->mac_addr, binfo->bi_enet1addr, 6);
|
|
}
|
|
|
|
ppc_sys_device_remove(MPC85xx_eTSEC3);
|
|
ppc_sys_device_remove(MPC85xx_eTSEC4);
|
|
|
|
#ifdef CONFIG_BLK_DEV_INITRD
|
|
if (initrd_start)
|
|
ROOT_DEV = Root_RAM0;
|
|
else
|
|
#endif
|
|
#ifdef CONFIG_ROOT_NFS
|
|
ROOT_DEV = Root_NFS;
|
|
#else
|
|
ROOT_DEV = Root_HDA1;
|
|
#endif
|
|
}
|
|
|
|
/* ************************************************************************ */
|
|
void __init
|
|
platform_init(unsigned long r3, unsigned long r4, unsigned long r5,
|
|
unsigned long r6, unsigned long r7)
|
|
{
|
|
/* parse_bootinfo must always be called first */
|
|
parse_bootinfo(find_bootinfo());
|
|
|
|
/*
|
|
* If we were passed in a board information, copy it into the
|
|
* residual data area.
|
|
*/
|
|
if (r3) {
|
|
memcpy((void *) __res, (void *) (r3 + KERNELBASE),
|
|
sizeof (bd_t));
|
|
|
|
}
|
|
#ifdef CONFIG_SERIAL_TEXT_DEBUG
|
|
{
|
|
bd_t *binfo = (bd_t *) __res;
|
|
struct uart_port p;
|
|
|
|
/* Use the last TLB entry to map CCSRBAR to allow access to DUART regs */
|
|
settlbcam(num_tlbcam_entries - 1, binfo->bi_immr_base,
|
|
binfo->bi_immr_base, MPC85xx_CCSRBAR_SIZE, _PAGE_IO, 0);
|
|
|
|
memset(&p, 0, sizeof (p));
|
|
p.iotype = SERIAL_IO_MEM;
|
|
p.membase = (void *) binfo->bi_immr_base + MPC85xx_UART0_OFFSET;
|
|
p.uartclk = binfo->bi_busfreq;
|
|
|
|
gen550_init(0, &p);
|
|
|
|
memset(&p, 0, sizeof (p));
|
|
p.iotype = SERIAL_IO_MEM;
|
|
p.membase = (void *) binfo->bi_immr_base + MPC85xx_UART1_OFFSET;
|
|
p.uartclk = binfo->bi_busfreq;
|
|
|
|
gen550_init(1, &p);
|
|
}
|
|
#endif
|
|
|
|
#if defined(CONFIG_BLK_DEV_INITRD)
|
|
/*
|
|
* If the init RAM disk has been configured in, and there's a valid
|
|
* starting address for it, set it up.
|
|
*/
|
|
if (r4) {
|
|
initrd_start = r4 + KERNELBASE;
|
|
initrd_end = r5 + KERNELBASE;
|
|
}
|
|
#endif /* CONFIG_BLK_DEV_INITRD */
|
|
|
|
/* Copy the kernel command line arguments to a safe place. */
|
|
|
|
if (r6) {
|
|
*(char *) (r7 + KERNELBASE) = 0;
|
|
strcpy(cmd_line, (char *) (r6 + KERNELBASE));
|
|
}
|
|
|
|
identify_ppc_sys_by_id(mfspr(SPRN_SVR));
|
|
|
|
/* setup the PowerPC module struct */
|
|
ppc_md.setup_arch = mpc85xx_cds_setup_arch;
|
|
ppc_md.show_cpuinfo = mpc85xx_cds_show_cpuinfo;
|
|
|
|
ppc_md.init_IRQ = mpc85xx_cds_init_IRQ;
|
|
ppc_md.get_irq = openpic_get_irq;
|
|
|
|
ppc_md.restart = mpc85xx_restart;
|
|
ppc_md.power_off = mpc85xx_power_off;
|
|
ppc_md.halt = mpc85xx_halt;
|
|
|
|
ppc_md.find_end_of_memory = mpc85xx_find_end_of_memory;
|
|
|
|
ppc_md.calibrate_decr = mpc85xx_calibrate_decr;
|
|
|
|
ppc_md.time_init = todc_time_init;
|
|
ppc_md.set_rtc_time = todc_set_rtc_time;
|
|
ppc_md.get_rtc_time = todc_get_rtc_time;
|
|
|
|
ppc_md.nvram_read_val = todc_direct_read_val;
|
|
ppc_md.nvram_write_val = todc_direct_write_val;
|
|
|
|
#if defined(CONFIG_SERIAL_8250) && defined(CONFIG_SERIAL_TEXT_DEBUG)
|
|
ppc_md.progress = gen550_progress;
|
|
#endif /* CONFIG_SERIAL_8250 && CONFIG_SERIAL_TEXT_DEBUG */
|
|
#if defined(CONFIG_SERIAL_8250) && defined(CONFIG_KGDB)
|
|
ppc_md.early_serial_map = mpc85xx_early_serial_map;
|
|
#endif /* CONFIG_SERIAL_8250 && CONFIG_KGDB */
|
|
|
|
if (ppc_md.progress)
|
|
ppc_md.progress("mpc85xx_cds_init(): exit", 0);
|
|
|
|
return;
|
|
}
|