OpenSDV
/
original_kernel
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
original_kernel/arch/microblaze/Makefile

94 lines
3.4 KiB
Makefile
Raw Normal View History

License cleanup: add SPDX GPL-2.0 license identifier to files with no license Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-01 22:07:57 +08:00
# SPDX-License-Identifier: GPL-2.0
microblaze: Wire up defconfig to mmu_defconfig Without this, "make defconfig" fails with *** Can't find default configuration "arch/microblaze/defconfig"! All other architectures either set KBUILD_DEFCONFIG, or provide arch/*/defconfig. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2013-11-13 03:22:44 +08:00
KBUILD_DEFCONFIG := mmu_defconfig
microblaze_mmu_v2: Makefiles Signed-off-by: Michal Simek <monstr@monstr.eu>
2009-05-26 22:30:32 +08:00
UTS_SYSNAME = -DUTS_SYSNAME=\"Linux\"
microblaze_v8: Makefiles for Microblaze cpu Reviewed-by: Ingo Molnar <mingo@elte.hu> Acked-by: Randy Dunlap <randy.dunlap@oracle.com> Acked-by: John Linn <john.linn@xilinx.com> Acked-by: Stephen Neuendorffer <stephen.neuendorffer@xilinx.com> Acked-by: John Williams <john.williams@petalogix.com> Signed-off-by: Michal Simek <monstr@monstr.eu>
2009-03-27 21:25:51 +08:00
arch: microblaze: Fix spelling mistake "vesion" -> "version" There is a spelling mistake in the comment. Fix it. Signed-off-by: Colin Ian King <colin.king@canonical.com> Link: https://lore.kernel.org/r/20210601103707.9701-1-colin.king@canonical.com Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2021-06-01 18:37:07 +08:00
# What CPU version are we building for, and crack it open
microblaze_v8: Makefiles for Microblaze cpu Reviewed-by: Ingo Molnar <mingo@elte.hu> Acked-by: Randy Dunlap <randy.dunlap@oracle.com> Acked-by: John Linn <john.linn@xilinx.com> Acked-by: Stephen Neuendorffer <stephen.neuendorffer@xilinx.com> Acked-by: John Williams <john.williams@petalogix.com> Signed-off-by: Michal Simek <monstr@monstr.eu>
2009-03-27 21:25:51 +08:00
# as major.minor.rev
kbuild: do not quote string values in include/config/auto.conf The previous commit fixed up all shell scripts to not include include/config/auto.conf. Now that include/config/auto.conf is only included by Makefiles, we can change it into a more Make-friendly form. Previously, Kconfig output string values enclosed with double-quotes (both in the .config and include/config/auto.conf): CONFIG_X="foo bar" Unlike shell, Make handles double-quotes (and single-quotes as well) verbatim. We must rip them off when used. There are some patterns: [1] $(patsubst "%",%,$(CONFIG_X)) [2] $(CONFIG_X:"%"=%) [3] $(subst ",,$(CONFIG_X)) [4] $(shell echo $(CONFIG_X)) These are not only ugly, but also fragile. [1] and [2] do not work if the value contains spaces, like CONFIG_X=" foo bar " [3] does not work correctly if the value contains double-quotes like CONFIG_X="foo\"bar" [4] seems to work better, but has a cost of forking a process. Anyway, quoted strings were always PITA for our Makefiles. This commit changes Kconfig to stop quoting in include/config/auto.conf. These are the string type symbols referenced in Makefiles or scripts: ACPI_CUSTOM_DSDT_FILE ARC_BUILTIN_DTB_NAME ARC_TUNE_MCPU BUILTIN_DTB_SOURCE CC_IMPLICIT_FALLTHROUGH CC_VERSION_TEXT CFG80211_EXTRA_REGDB_KEYDIR EXTRA_FIRMWARE EXTRA_FIRMWARE_DIR EXTRA_TARGETS H8300_BUILTIN_DTB INITRAMFS_SOURCE LOCALVERSION MODULE_SIG_HASH MODULE_SIG_KEY NDS32_BUILTIN_DTB NIOS2_DTB_SOURCE OPENRISC_BUILTIN_DTB SOC_CANAAN_K210_DTB_SOURCE SYSTEM_BLACKLIST_HASH_LIST SYSTEM_REVOCATION_KEYS SYSTEM_TRUSTED_KEYS TARGET_CPU UNUSED_KSYMS_WHITELIST XILINX_MICROBLAZE0_FAMILY XILINX_MICROBLAZE0_HW_VER XTENSA_VARIANT_NAME I checked them one by one, and fixed up the code where necessary. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2021-12-14 10:53:53 +08:00
CPU_VER := $(CONFIG_XILINX_MICROBLAZE0_HW_VER)
microblaze: use built-in function to get CPU_{MAJOR,MINOR,REV} Use built-in functions instead of shell commands to avoid forking processes. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Reviewed-by: Nicolas Schier <n.schier@avm.de>
2021-12-14 10:53:55 +08:00
CPU_MAJOR := $(word 1, $(subst ., , $(CPU_VER)))
CPU_MINOR := $(word 2, $(subst ., , $(CPU_VER)))
CPU_REV := $(word 3, $(subst ., , $(CPU_VER)))
microblaze_v8: Makefiles for Microblaze cpu Reviewed-by: Ingo Molnar <mingo@elte.hu> Acked-by: Randy Dunlap <randy.dunlap@oracle.com> Acked-by: John Linn <john.linn@xilinx.com> Acked-by: Stephen Neuendorffer <stephen.neuendorffer@xilinx.com> Acked-by: John Williams <john.williams@petalogix.com> Signed-off-by: Michal Simek <monstr@monstr.eu>
2009-03-27 21:25:51 +08:00
export CPU_VER CPU_MAJOR CPU_MINOR CPU_REV
# Use cpu-related CONFIG_ vars to set compile options.
microblaze: Makefile cleanup Reviewed the Makefile on request by Michal and this is the resulting changes. o Use ':=' for assignmnet so we do not re-evaluate for each use o Use $(shell echo xxx) to remove "" o Replaced CFLAGS_KERNEL with KBUILD_CFLAGS The settings are equally relevant for modules and the linked kernel o Dropped LDFLAGS_BLOB - it is no longer used o Refactored assignmnets to libs-y and core-y o Use MMU for the MMU specific extension. "MMUEXT" was hurting my eyes and I did not wanted it spread to m68k Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Michal Simek <monstr@monstr.eu>
2009-07-24 15:04:49 +08:00
# The various CONFIG_XILINX cpu features options are integers 0/1/2...
# rather than bools y/n
microblaze_v8: Makefiles for Microblaze cpu Reviewed-by: Ingo Molnar <mingo@elte.hu> Acked-by: Randy Dunlap <randy.dunlap@oracle.com> Acked-by: John Linn <john.linn@xilinx.com> Acked-by: Stephen Neuendorffer <stephen.neuendorffer@xilinx.com> Acked-by: John Williams <john.williams@petalogix.com> Signed-off-by: Michal Simek <monstr@monstr.eu>
2009-03-27 21:25:51 +08:00
microblaze: trivial: Fix removed the part of line Signed-off-by: Michal Simek <monstr@monstr.eu>
2011-01-03 18:35:28 +08:00
# Work out HW multipler support. This is tricky.
Fix common misspellings Fixes generated by 'codespell' and manually reviewed. Signed-off-by: Lucas De Marchi <lucas.demarchi@profusion.mobi>
2011-03-31 09:57:33 +08:00
# 1. Spartan2 has no HW multipliers.
microblaze_v8: Makefiles for Microblaze cpu Reviewed-by: Ingo Molnar <mingo@elte.hu> Acked-by: Randy Dunlap <randy.dunlap@oracle.com> Acked-by: John Linn <john.linn@xilinx.com> Acked-by: Stephen Neuendorffer <stephen.neuendorffer@xilinx.com> Acked-by: John Williams <john.williams@petalogix.com> Signed-off-by: Michal Simek <monstr@monstr.eu>
2009-03-27 21:25:51 +08:00
# 2. MicroBlaze v3.x always uses them, except in Spartan 2
# 3. All other FPGa/CPU ver combos, we can trust the CONFIG_ settings
ifeq (,$(findstring spartan2,$(CONFIG_XILINX_MICROBLAZE0_FAMILY)))
ifeq ($(CPU_MAJOR),3)
CPUFLAGS-1 += -mno-xl-soft-mul
else
fix typos concerning "hierarchy" Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-06-11 18:16:59 +08:00
# USE_HW_MUL can be 0, 1, or 2, defining a hierarchy of HW Mul support.
microblaze_v8: Makefiles for Microblaze cpu Reviewed-by: Ingo Molnar <mingo@elte.hu> Acked-by: Randy Dunlap <randy.dunlap@oracle.com> Acked-by: John Linn <john.linn@xilinx.com> Acked-by: Stephen Neuendorffer <stephen.neuendorffer@xilinx.com> Acked-by: John Williams <john.williams@petalogix.com> Signed-off-by: Michal Simek <monstr@monstr.eu>
2009-03-27 21:25:51 +08:00
CPUFLAGS-$(subst 1,,$(CONFIG_XILINX_MICROBLAZE0_USE_HW_MUL)) += -mxl-multiply-high
CPUFLAGS-$(CONFIG_XILINX_MICROBLAZE0_USE_HW_MUL) += -mno-xl-soft-mul
endif
endif
CPUFLAGS-$(CONFIG_XILINX_MICROBLAZE0_USE_DIV) += -mno-xl-soft-div
CPUFLAGS-$(CONFIG_XILINX_MICROBLAZE0_USE_BARREL) += -mxl-barrel-shift
microblaze: Correspond CONFIG...PCMP in Makefile/Kconfig Makefile contained different cpu config flag than is in Kconfig.auto in platform folder Signed-off-by: Michal Simek <monstr@monstr.eu>
2009-04-20 15:56:24 +08:00
CPUFLAGS-$(CONFIG_XILINX_MICROBLAZE0_USE_PCMP_INSTR) += -mxl-pattern-compare
microblaze: fix endian handling Building an allmodconfig kernel fails horribly because of endian mismatch. It turns out that the -mlittle-endian switch was not honored at all as we were using the wrong Kconfig symbol and failing to apply CPUFLAGS to the CFLAGS. Finally, the linker flags did not get set right. This addresses all three of those issues, which now lets me build both big-endian and little-endian kernels for testing. Fixes: 428dbf156cc5 ("arch: change default endian for microblaze") Fixes: 206d3642d8ee ("arch/microblaze: add choice for endianness and update Makefile") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-01-02 19:47:19 +08:00
ifdef CONFIG_CPU_BIG_ENDIAN
KBUILD_CFLAGS += -mbig-endian
KBUILD_AFLAGS += -mbig-endian
kbuild: rename LDFLAGS to KBUILD_LDFLAGS Commit a0f97e06a43c ("kbuild: enable 'make CFLAGS=...' to add additional options to CC") renamed CFLAGS to KBUILD_CFLAGS. Commit 222d394d30e7 ("kbuild: enable 'make AFLAGS=...' to add additional options to AS") renamed AFLAGS to KBUILD_AFLAGS. Commit 06c5040cdb13 ("kbuild: enable 'make CPPFLAGS=...' to add additional options to CPP") renamed CPPFLAGS to KBUILD_CPPFLAGS. For some reason, LDFLAGS was not renamed. Using a well-known variable like LDFLAGS may result in accidental override of the variable. Kbuild generally uses KBUILD_ prefixed variables for the internally appended options, so here is one more conversion to sanitize the naming convention. I did not touch Makefiles under tools/ since the tools build system is a different world. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Reviewed-by: Palmer Dabbelt <palmer@sifive.com>
2018-08-24 07:20:39 +08:00
KBUILD_LDFLAGS += -EB
microblaze: fix endian handling Building an allmodconfig kernel fails horribly because of endian mismatch. It turns out that the -mlittle-endian switch was not honored at all as we were using the wrong Kconfig symbol and failing to apply CPUFLAGS to the CFLAGS. Finally, the linker flags did not get set right. This addresses all three of those issues, which now lets me build both big-endian and little-endian kernels for testing. Fixes: 428dbf156cc5 ("arch: change default endian for microblaze") Fixes: 206d3642d8ee ("arch/microblaze: add choice for endianness and update Makefile") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-01-02 19:47:19 +08:00
else
KBUILD_CFLAGS += -mlittle-endian
KBUILD_AFLAGS += -mlittle-endian
kbuild: rename LDFLAGS to KBUILD_LDFLAGS Commit a0f97e06a43c ("kbuild: enable 'make CFLAGS=...' to add additional options to CC") renamed CFLAGS to KBUILD_CFLAGS. Commit 222d394d30e7 ("kbuild: enable 'make AFLAGS=...' to add additional options to AS") renamed AFLAGS to KBUILD_AFLAGS. Commit 06c5040cdb13 ("kbuild: enable 'make CPPFLAGS=...' to add additional options to CPP") renamed CPPFLAGS to KBUILD_CPPFLAGS. For some reason, LDFLAGS was not renamed. Using a well-known variable like LDFLAGS may result in accidental override of the variable. Kbuild generally uses KBUILD_ prefixed variables for the internally appended options, so here is one more conversion to sanitize the naming convention. I did not touch Makefiles under tools/ since the tools build system is a different world. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Reviewed-by: Palmer Dabbelt <palmer@sifive.com>
2018-08-24 07:20:39 +08:00
KBUILD_LDFLAGS += -EL
microblaze: fix endian handling Building an allmodconfig kernel fails horribly because of endian mismatch. It turns out that the -mlittle-endian switch was not honored at all as we were using the wrong Kconfig symbol and failing to apply CPUFLAGS to the CFLAGS. Finally, the linker flags did not get set right. This addresses all three of those issues, which now lets me build both big-endian and little-endian kernels for testing. Fixes: 428dbf156cc5 ("arch: change default endian for microblaze") Fixes: 206d3642d8ee ("arch/microblaze: add choice for endianness and update Makefile") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-01-02 19:47:19 +08:00
endif
microblaze_v8: Makefiles for Microblaze cpu Reviewed-by: Ingo Molnar <mingo@elte.hu> Acked-by: Randy Dunlap <randy.dunlap@oracle.com> Acked-by: John Linn <john.linn@xilinx.com> Acked-by: Stephen Neuendorffer <stephen.neuendorffer@xilinx.com> Acked-by: John Williams <john.williams@petalogix.com> Signed-off-by: Michal Simek <monstr@monstr.eu>
2009-03-27 21:25:51 +08:00
CPUFLAGS-1 += $(call cc-option,-mcpu=v$(CPU_VER))
# r31 holds current when in kernel mode
microblaze: fix endian handling Building an allmodconfig kernel fails horribly because of endian mismatch. It turns out that the -mlittle-endian switch was not honored at all as we were using the wrong Kconfig symbol and failing to apply CPUFLAGS to the CFLAGS. Finally, the linker flags did not get set right. This addresses all three of those issues, which now lets me build both big-endian and little-endian kernels for testing. Fixes: 428dbf156cc5 ("arch: change default endian for microblaze") Fixes: 206d3642d8ee ("arch/microblaze: add choice for endianness and update Makefile") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-01-02 19:47:19 +08:00
KBUILD_CFLAGS += -ffixed-r31 $(CPUFLAGS-y) $(CPUFLAGS-1) $(CPUFLAGS-2)
microblaze_v8: Makefiles for Microblaze cpu Reviewed-by: Ingo Molnar <mingo@elte.hu> Acked-by: Randy Dunlap <randy.dunlap@oracle.com> Acked-by: John Linn <john.linn@xilinx.com> Acked-by: Stephen Neuendorffer <stephen.neuendorffer@xilinx.com> Acked-by: John Williams <john.williams@petalogix.com> Signed-off-by: Michal Simek <monstr@monstr.eu>
2009-03-27 21:25:51 +08:00
microblaze: Makefile cleanup Reviewed the Makefile on request by Michal and this is the resulting changes. o Use ':=' for assignmnet so we do not re-evaluate for each use o Use $(shell echo xxx) to remove "" o Replaced CFLAGS_KERNEL with KBUILD_CFLAGS The settings are equally relevant for modules and the linked kernel o Dropped LDFLAGS_BLOB - it is no longer used o Refactored assignmnets to libs-y and core-y o Use MMU for the MMU specific extension. "MMUEXT" was hurting my eyes and I did not wanted it spread to m68k Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Michal Simek <monstr@monstr.eu>
2009-07-24 15:04:49 +08:00
libs-y += arch/microblaze/lib/
microblaze_v8: Makefiles for Microblaze cpu Reviewed-by: Ingo Molnar <mingo@elte.hu> Acked-by: Randy Dunlap <randy.dunlap@oracle.com> Acked-by: John Linn <john.linn@xilinx.com> Acked-by: Stephen Neuendorffer <stephen.neuendorffer@xilinx.com> Acked-by: John Williams <john.williams@petalogix.com> Signed-off-by: Michal Simek <monstr@monstr.eu>
2009-03-27 21:25:51 +08:00
microblaze: Makefile cleanup Reviewed the Makefile on request by Michal and this is the resulting changes. o Use ':=' for assignmnet so we do not re-evaluate for each use o Use $(shell echo xxx) to remove "" o Replaced CFLAGS_KERNEL with KBUILD_CFLAGS The settings are equally relevant for modules and the linked kernel o Dropped LDFLAGS_BLOB - it is no longer used o Refactored assignmnets to libs-y and core-y o Use MMU for the MMU specific extension. "MMUEXT" was hurting my eyes and I did not wanted it spread to m68k Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Michal Simek <monstr@monstr.eu>
2009-07-24 15:04:49 +08:00
boot := arch/microblaze/boot
microblaze_v8: Makefiles for Microblaze cpu Reviewed-by: Ingo Molnar <mingo@elte.hu> Acked-by: Randy Dunlap <randy.dunlap@oracle.com> Acked-by: John Linn <john.linn@xilinx.com> Acked-by: Stephen Neuendorffer <stephen.neuendorffer@xilinx.com> Acked-by: John Williams <john.williams@petalogix.com> Signed-off-by: Michal Simek <monstr@monstr.eu>
2009-03-27 21:25:51 +08:00
microblaze: Support simpleImage.dts make target Instead of remembering to specify DTB= on the make commandline, this commit allows the much friendlier make simpleImage.<dts> where <dts>.dts is expected to be found in arch/microblaze/boot/dts/ The resulting vmlinux, with the compiled DTS linked in, will be copied to boot/simpleImage.<dts> This mirrors the same functionality as on PowerPC, albeit achieving it in a slightly different way. + strip simpleImage file The size of output file is very similar to linux.bin. vmlinux - full elf without fdt blob simpleImage.<dtb name>.unstrip - full elf with fdt blob simpleImage.<dtb name> - stripped elf with fdt blob Add symlink to generic system.dts in platform folder Signed-off-by: John Williams <john.williams@petalogix.com> Signed-off-by: Michal Simek <monstr@monstr.eu>
2009-09-14 21:15:49 +08:00
# Are we making a simpleImage.<boardname> target? If so, crack out the boardname
DTB:=$(subst simpleImage.,,$(filter simpleImage.%, $(MAKECMDGOALS)))
microblaze: Remove noMMU code This configuration is obsolete and likely none is really using it. That's why remove it to simplify code. Note about CONFIG_MMU in hw_exception_handler.S is left intentionally for better comment understanding. Cc: Mike Rapoport <rppt@kernel.org> Cc: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Michal Simek <michal.simek@xilinx.com> Acked-by: Mike Rapoport <rppt@linux.ibm.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Link: https://lore.kernel.org/r/43486cab370e0c0a79860120b71e0caac75a7e44.1606397528.git.michal.simek@xilinx.com
2020-11-26 21:32:25 +08:00
export DTB
microblaze_v8: Makefiles for Microblaze cpu Reviewed-by: Ingo Molnar <mingo@elte.hu> Acked-by: Randy Dunlap <randy.dunlap@oracle.com> Acked-by: John Linn <john.linn@xilinx.com> Acked-by: Stephen Neuendorffer <stephen.neuendorffer@xilinx.com> Acked-by: John Williams <john.williams@petalogix.com> Signed-off-by: Michal Simek <monstr@monstr.eu>
2009-03-27 21:25:51 +08:00
all: linux.bin
microblaze: generate uapi header and system call table files System call table generation script must be run to gener- ate unistd_32.h and syscall_table.h files. This patch will have changes which will invokes the script. This patch will generate unistd_32.h and syscall_table.h files by the syscall table generation script invoked by microblaze/Makefile and the generated files against the removed files must be identical. The generated uapi header file will be included in uapi/- asm/unistd.h and generated system call table header file will be included by kernel/syscall_table.S file. Signed-off-by: Firoz Khan <firoz.khan@linaro.org> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-11-13 14:04:34 +08:00
archheaders:
$(Q)$(MAKE) $(build)=arch/microblaze/kernel/syscalls all
microblaze: add linux.bin* and simpleImage.* to PHONY linux.bin, linux.bin.gz, and linux.bin.ub are phony targets to generate a corresponding image under arch/microblaze/boot/. simpleImage.% also works like a phony target, but a pattern that contains '%' cannot be a phony target. I replaced it with equivalent simpleImage.$(DTB). Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-12-07 19:33:55 +08:00
PHONY += linux.bin linux.bin.gz linux.bin.ub
microblaze: fix race condition in building boot images I fixed a race condition in the parallel building of ARM in commit 3939f3345050 ("ARM: 8418/1: add boot image dependencies to not generate invalid images"). I see the same problem for MicroBlaze too. "make -j<N> ARCH=microblaze all linux.bin.ub" results in a broken build because two threads descend into arch/microblaze/boot simultaneously. Add proper dependencies to avoid it. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-12-07 19:33:56 +08:00
linux.bin.ub linux.bin.gz: linux.bin
linux.bin: vmlinux
linux.bin linux.bin.gz linux.bin.ub:
microblaze: Fix build with make 3.82 When running make headers_install_all on x86_64 and make 3.82 I hit this: arch/microblaze/Makefile:80: *** mixed implicit and normal rules. Stop. make: *** [headers_install_all] Error 2 So split the rules to satisfy make 3.82. Signed-off-by: Thomas Backlund <tmb@mandriva.org> Cc: Stable <stable@kernel.org> Signed-off-by: Michal Simek <monstr@monstr.eu>
2010-10-21 18:19:10 +08:00
$(Q)$(MAKE) $(build)=$(boot) $(boot)/$@
kbuild: fix "cat: .version: No such file or directory" Since commit 2df8220cc511 ("kbuild: build init/built-in.a just once"), the .version file is not touched at all when KBUILD_BUILD_VERSION is given. If KBUILD_BUILD_VERSION is specified and the .version file is missing (for example right after 'make mrproper'), "No such file or director" is shown. Even if the .version exists, it is irrelevant to the version of the current build. $ make -j$(nproc) KBUILD_BUILD_VERSION=100 mrproper defconfig all [ snip ] BUILD arch/x86/boot/bzImage cat: .version: No such file or directory Kernel: arch/x86/boot/bzImage is ready (#) Show KBUILD_BUILD_VERSION if it is given. Fixes: 2df8220cc511 ("kbuild: build init/built-in.a just once") Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>
2022-11-22 22:39:02 +08:00
@echo 'Kernel: $(boot)/$@ is ready' ' (#'$(or $(KBUILD_BUILD_VERSION),`cat .version`)')'
microblaze: Makefile clean Remove unnecessary variables Signed-off-by: Jason Wu <huanyu@xilinx.com> Acked-by: Michal Simek <michal.simek@xilinx.com>
2013-01-31 11:59:09 +08:00
microblaze: add linux.bin* and simpleImage.* to PHONY linux.bin, linux.bin.gz, and linux.bin.ub are phony targets to generate a corresponding image under arch/microblaze/boot/. simpleImage.% also works like a phony target, but a pattern that contains '%' cannot be a phony target. I replaced it with equivalent simpleImage.$(DTB). Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-12-07 19:33:55 +08:00
PHONY += simpleImage.$(DTB)
simpleImage.$(DTB): vmlinux
microblaze: fix multiple bugs in arch/microblaze/boot/Makefile This commit fixes some build issues. The first issue is the breakage of linux.bin.ub target since commit ece97f3a5fb5 ("microblaze: Fix simpleImage format generation") because the addition of UIMAGE_{IN,OUT} affected it. make ARCH=microblaze CROSS_COMPILE=microblaze-linux- linux.bin.ub [ snip ] OBJCOPY arch/microblaze/boot/linux.bin UIMAGE arch/microblaze/boot/linux.bin.ub.ub /usr/bin/mkimage: Can't open arch/microblaze/boot/linux.bin.ub: No such file or directory make[1]: *** [arch/microblaze/boot/Makefile;14: arch/microblaze/boot/linux.bin.ub] Error 1 make: *** [arch/microblaze/Makefile;83: linux.bin.ub] Error 2 The second issue is the use of the "if_changed" multiple times for the same target. As commit 92a4728608a8 ("x86/boot: Fix if_changed build flip/flop bug") pointed out, this never works properly. Moreover, generating multiple images as a side-effect is confusing. Let's split the build recipe for each image. simpleImage.<dt>*.unstrip is just a copy of vmlinux. simpleImage.<dt> and simpleImage.<dt>.ub are created in the same way as linux.bin and linux.bin.ub, respectively. I kept simpleImage.* recipes independent of linux.bin.* ones to not change the behavior. Lastly, this commit fixes "make ARCH=microblaze clean". Previously, it only cleaned up the unstrip image. Now, all the simpleImage files are cleaned. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-12-07 19:33:54 +08:00
$(Q)$(MAKE) $(build)=$(boot) $(addprefix $(boot)/$@., ub unstrip strip)
kbuild: fix "cat: .version: No such file or directory" Since commit 2df8220cc511 ("kbuild: build init/built-in.a just once"), the .version file is not touched at all when KBUILD_BUILD_VERSION is given. If KBUILD_BUILD_VERSION is specified and the .version file is missing (for example right after 'make mrproper'), "No such file or director" is shown. Even if the .version exists, it is irrelevant to the version of the current build. $ make -j$(nproc) KBUILD_BUILD_VERSION=100 mrproper defconfig all [ snip ] BUILD arch/x86/boot/bzImage cat: .version: No such file or directory Kernel: arch/x86/boot/bzImage is ready (#) Show KBUILD_BUILD_VERSION if it is given. Fixes: 2df8220cc511 ("kbuild: build init/built-in.a just once") Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>
2022-11-22 22:39:02 +08:00
@echo 'Kernel: $(boot)/$@ is ready' ' (#'$(or $(KBUILD_BUILD_VERSION),`cat .version`)')'
microblaze_v8: Makefiles for Microblaze cpu Reviewed-by: Ingo Molnar <mingo@elte.hu> Acked-by: Randy Dunlap <randy.dunlap@oracle.com> Acked-by: John Linn <john.linn@xilinx.com> Acked-by: Stephen Neuendorffer <stephen.neuendorffer@xilinx.com> Acked-by: John Williams <john.williams@petalogix.com> Signed-off-by: Michal Simek <monstr@monstr.eu>
2009-03-27 21:25:51 +08:00
define archhelp
microblaze: Support simpleImage.dts make target Instead of remembering to specify DTB= on the make commandline, this commit allows the much friendlier make simpleImage.<dts> where <dts>.dts is expected to be found in arch/microblaze/boot/dts/ The resulting vmlinux, with the compiled DTS linked in, will be copied to boot/simpleImage.<dts> This mirrors the same functionality as on PowerPC, albeit achieving it in a slightly different way. + strip simpleImage file The size of output file is very similar to linux.bin. vmlinux - full elf without fdt blob simpleImage.<dtb name>.unstrip - full elf with fdt blob simpleImage.<dtb name> - stripped elf with fdt blob Add symlink to generic system.dts in platform folder Signed-off-by: John Williams <john.williams@petalogix.com> Signed-off-by: Michal Simek <monstr@monstr.eu>
2009-09-14 21:15:49 +08:00
echo '* linux.bin - Create raw binary'
echo ' linux.bin.gz - Create compressed raw binary'
microblaze: Add linux.bin.ub target Currently the linux.bin target creates both linux.bin and linux.bin.ub. Add linux.bin.ub as separate target to generate linux.bin.ub. Signed-off-by: Jason Wu <huanyu@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2013-08-21 13:10:32 +08:00
echo ' linux.bin.ub - Create U-Boot wrapped raw binary'
microblaze: adjust the help to the real behavior "make ARCH=microblaze help" mentions simpleImage.<dt>.unstrip, but it is not a real Make target. It does not work because Makefile assumes "system.unstrip" is the name of DT. $ make ARCH=microblaze CROSS_COMPILE=microblaze-linux- simpleImage.system.unstrip [ snip ] make[1]: *** No rule to make target 'arch/microblaze/boot/dts/system.unstrip.dtb', needed by 'arch/microblaze/boot/dts/system.dtb'. Stop. make: *** [Makefile;1060: arch/microblaze/boot/dts] Error 2 make: *** Waiting for unfinished jobs.... simpleImage.<dt> works like a phony target that generates multiple images. Reflect the real behavior. I removed the DT directory path information because it is already explained a few lines below. While I am here, I deleted the redundant *_defconfig explanation. The top-level Makefile caters to list available defconfig files: mmu_defconfig - Build for mmu nommu_defconfig - Build for nommu Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-12-07 19:33:52 +08:00
echo ' simpleImage.<dt> - Create the following images with <dt>.dtb linked in'
echo ' simpleImage.<dt> : raw image'
echo ' simpleImage.<dt>.ub : raw image with U-Boot header'
echo ' simpleImage.<dt>.unstrip: ELF (identical to vmlinux)'
echo ' simpleImage.<dt>.strip : stripped ELF'
microblaze: Support simpleImage.dts make target Instead of remembering to specify DTB= on the make commandline, this commit allows the much friendlier make simpleImage.<dts> where <dts>.dts is expected to be found in arch/microblaze/boot/dts/ The resulting vmlinux, with the compiled DTS linked in, will be copied to boot/simpleImage.<dts> This mirrors the same functionality as on PowerPC, albeit achieving it in a slightly different way. + strip simpleImage file The size of output file is very similar to linux.bin. vmlinux - full elf without fdt blob simpleImage.<dtb name>.unstrip - full elf with fdt blob simpleImage.<dtb name> - stripped elf with fdt blob Add symlink to generic system.dts in platform folder Signed-off-by: John Williams <john.williams@petalogix.com> Signed-off-by: Michal Simek <monstr@monstr.eu>
2009-09-14 21:15:49 +08:00
echo ' Targets with <dt> embed a device tree blob inside the image'
echo ' These targets support board with firmware that does not'
echo ' support passing a device tree directly. Replace <dt> with the'
echo ' name of a dts file from the arch/microblaze/boot/dts/ directory'
echo ' (minus the .dts extension).'
microblaze_v8: Makefiles for Microblaze cpu Reviewed-by: Ingo Molnar <mingo@elte.hu> Acked-by: Randy Dunlap <randy.dunlap@oracle.com> Acked-by: John Linn <john.linn@xilinx.com> Acked-by: Stephen Neuendorffer <stephen.neuendorffer@xilinx.com> Acked-by: John Williams <john.williams@petalogix.com> Signed-off-by: Michal Simek <monstr@monstr.eu>
2009-03-27 21:25:51 +08:00
endef
microblaze: Fix Makefile to delete build generated files 'make clean' does not to delete the following build generated file: arch/microblaze/boot/linux.bin.ub 'make mrproper' does not to delete the following build generated files: arch/microblaze/boot/simpleImage.* Fix the Makefile to delete these build generated files. See [1] for a discussion on why simpleImage.* files are deleted with 'make mrproper' and not with 'make clean'. [1] http://lkml.org/lkml/2010/3/12/96 Signed-off-by: Arun Bhanu <arun@bhanu.net> Signed-off-by: Michal Simek <monstr@monstr.eu>
2010-03-17 16:06:03 +08:00
MRPROPER_FILES += $(boot)/simpleImage.*