OpenSDV
/
original_kernel
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
original_kernel/arch/sparc/prom/p1275.c

58 lines
1.2 KiB
C
Raw Normal View History

sparc64: remove CVS keywords This patch removes the CVS keywords that weren't updated for a long time from comments. Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-05-20 07:52:27 +08:00
/*
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
* p1275.c: Sun IEEE 1275 PROM low level interface routines
*
* Copyright (C) 1996,1997 Jakub Jelinek (jj@sunsite.mff.cuni.cz)
*/
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/sched.h>
#include <linux/smp.h>
#include <linux/string.h>
#include <linux/spinlock.h>
#include <asm/openprom.h>
#include <asm/oplib.h>
#include <asm/system.h>
#include <asm/spitfire.h>
#include <asm/pstate.h>
[SPARC64]: Initial LDOM cpu hotplug support. Only adding cpus is supports at the moment, removal will come next. When new cpus are configured, the machine description is updated. When we get the configure request we pass in a cpu mask of to-be-added cpus to the mdesc CPU node parser so it only fetches information for those cpus. That code also proceeds to update the SMT/multi-core scheduling bitmaps. cpu_up() does all the work and we return the status back over the DS channel. CPUs via dr-cpu need to be booted straight out of the hypervisor, and this requires: 1) A new trampoline mechanism. CPUs are booted straight out of the hypervisor with MMU disabled and running in physical addresses with no mappings installed in the TLB. The new hvtramp.S code sets up the critical cpu state, installs the locked TLB mappings for the kernel, and turns the MMU on. It then proceeds to follow the logic of the existing trampoline.S SMP cpu bringup code. 2) All calls into OBP have to be disallowed when domaining is enabled. Since cpus boot straight into the kernel from the hypervisor, OBP has no state about that cpu and therefore cannot handle being invoked on that cpu. Luckily it's only a handful of interfaces which can be called after the OBP device tree is obtained. For example, rebooting, halting, powering-off, and setting options node variables. CPU removal support will require some infrastructure changes here. Namely we'll have to process the requests via a true kernel thread instead of in a workqueue. workqueues run on a per-cpu thread, but when unconfiguring we might need to force the thread to execute on another cpu if the current cpu is the one being removed. Removal of a cpu also causes the kernel to destroy that cpu's workqueue running thread. Another issue on removal is that we may have interrupts still pointing to the cpu-to-be-removed. So new code will be needed to walk the active INO list and retarget those cpus as-needed. Signed-off-by: David S. Miller <davem@davemloft.net>
2007-07-14 07:03:42 +08:00
#include <asm/ldc.h>
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
struct {
long prom_callback; /* 0x00 */
void (*prom_cif_handler)(long *); /* 0x08 */
unsigned long prom_cif_stack; /* 0x10 */
} p1275buf;
extern void prom_world(int);
sparc64: Get rid of indirect p1275 PROM call buffer. This is based upon a report by Meelis Roos showing that it's possible that we'll try to fetch a property that is 32K in size with some devices. With the current fixed 3K buffer we use for moving data in and out of the firmware during PROM calls, that simply won't work. In fact, it will scramble random kernel data during bootup. The reasoning behind the temporary buffer is entirely historical. It used to be the case that we had problems referencing dynamic kernel memory (including the stack) early in the boot process before we explicitly told the firwmare to switch us over to the kernel trap table. So what we did was always give the firmware buffers that were locked into the main kernel image. But we no longer have problems like that, so get rid of all of this indirect bounce buffering. Besides fixing Meelis's bug, this also makes the kernel data about 3K smaller. It was also discovered during these conversions that the implementation of prom_retain() was completely wrong, so that was fixed here as well. Currently that interface is not in use. Reported-by: Meelis Roos <mroos@linux.ee> Tested-by: Meelis Roos <mroos@linux.ee> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-24 14:10:57 +08:00
extern void prom_cif_direct(unsigned long *args);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
extern void prom_cif_callback(void);
/*
sparc64: Make prom entry spinlock NMI safe. If we do something like try to print to the OF console from an NMI while we're already in OpenFirmware, we'll deadlock on the spinlock. Use a raw spinlock and disable NMIs when we take it. Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-04 01:06:03 +08:00
* This provides SMP safety on the p1275buf.
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
*/
sparc64: Make prom entry spinlock NMI safe. If we do something like try to print to the OF console from an NMI while we're already in OpenFirmware, we'll deadlock on the spinlock. Use a raw spinlock and disable NMIs when we take it. Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-04 01:06:03 +08:00
DEFINE_RAW_SPINLOCK(prom_entry_lock);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
sparc64: Get rid of indirect p1275 PROM call buffer. This is based upon a report by Meelis Roos showing that it's possible that we'll try to fetch a property that is 32K in size with some devices. With the current fixed 3K buffer we use for moving data in and out of the firmware during PROM calls, that simply won't work. In fact, it will scramble random kernel data during bootup. The reasoning behind the temporary buffer is entirely historical. It used to be the case that we had problems referencing dynamic kernel memory (including the stack) early in the boot process before we explicitly told the firwmare to switch us over to the kernel trap table. So what we did was always give the firmware buffers that were locked into the main kernel image. But we no longer have problems like that, so get rid of all of this indirect bounce buffering. Besides fixing Meelis's bug, this also makes the kernel data about 3K smaller. It was also discovered during these conversions that the implementation of prom_retain() was completely wrong, so that was fixed here as well. Currently that interface is not in use. Reported-by: Meelis Roos <mroos@linux.ee> Tested-by: Meelis Roos <mroos@linux.ee> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-24 14:10:57 +08:00
void p1275_cmd_direct(unsigned long *args)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
{
unsigned long flags;
sparc64: Make prom entry spinlock NMI safe. If we do something like try to print to the OF console from an NMI while we're already in OpenFirmware, we'll deadlock on the spinlock. Use a raw spinlock and disable NMIs when we take it. Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-04 01:06:03 +08:00
raw_local_save_flags(flags);
Fix IRQ flag handling naming Fix the IRQ flag handling naming. In linux/irqflags.h under one configuration, it maps: local_irq_enable() -> raw_local_irq_enable() local_irq_disable() -> raw_local_irq_disable() local_irq_save() -> raw_local_irq_save() ... and under the other configuration, it maps: raw_local_irq_enable() -> local_irq_enable() raw_local_irq_disable() -> local_irq_disable() raw_local_irq_save() -> local_irq_save() ... This is quite confusing. There should be one set of names expected of the arch, and this should be wrapped to give another set of names that are expected by users of this facility. Change this to have the arch provide: flags = arch_local_save_flags() flags = arch_local_irq_save() arch_local_irq_restore(flags) arch_local_irq_disable() arch_local_irq_enable() arch_irqs_disabled_flags(flags) arch_irqs_disabled() arch_safe_halt() Then linux/irqflags.h wraps these to provide: raw_local_save_flags(flags) raw_local_irq_save(flags) raw_local_irq_restore(flags) raw_local_irq_disable() raw_local_irq_enable() raw_irqs_disabled_flags(flags) raw_irqs_disabled() raw_safe_halt() with type checking on the flags 'arguments', and then wraps those to provide: local_save_flags(flags) local_irq_save(flags) local_irq_restore(flags) local_irq_disable() local_irq_enable() irqs_disabled_flags(flags) irqs_disabled() safe_halt() with tracing included if enabled. The arch functions can now all be inline functions rather than some of them having to be macros. Signed-off-by: David Howells <dhowells@redhat.com> [X86, FRV, MN10300] Signed-off-by: Chris Metcalf <cmetcalf@tilera.com> [Tile] Signed-off-by: Michal Simek <monstr@monstr.eu> [Microblaze] Tested-by: Catalin Marinas <catalin.marinas@arm.com> [ARM] Acked-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com> [AVR] Acked-by: Tony Luck <tony.luck@intel.com> [IA-64] Acked-by: Hirokazu Takata <takata@linux-m32r.org> [M32R] Acked-by: Greg Ungerer <gerg@uclinux.org> [M68K/M68KNOMMU] Acked-by: Ralf Baechle <ralf@linux-mips.org> [MIPS] Acked-by: Kyle McMartin <kyle@mcmartin.ca> [PA-RISC] Acked-by: Paul Mackerras <paulus@samba.org> [PowerPC] Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com> [S390] Acked-by: Chen Liqin <liqin.chen@sunplusct.com> [Score] Acked-by: Matt Fleming <matt@console-pimps.org> [SH] Acked-by: David S. Miller <davem@davemloft.net> [Sparc] Acked-by: Chris Zankel <chris@zankel.net> [Xtensa] Reviewed-by: Richard Henderson <rth@twiddle.net> [Alpha] Reviewed-by: Yoshinori Sato <ysato@users.sourceforge.jp> [H8300] Cc: starvik@axis.com [CRIS] Cc: jesper.nilsson@axis.com [CRIS] Cc: linux-cris-kernel@axis.com
2010-10-07 21:08:55 +08:00
raw_local_irq_restore((unsigned long)PIL_NMI);
sparc64: Make prom entry spinlock NMI safe. If we do something like try to print to the OF console from an NMI while we're already in OpenFirmware, we'll deadlock on the spinlock. Use a raw spinlock and disable NMIs when we take it. Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-04 01:06:03 +08:00
raw_spin_lock(&prom_entry_lock);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
prom_world(1);
sparc64: Get rid of indirect p1275 PROM call buffer. This is based upon a report by Meelis Roos showing that it's possible that we'll try to fetch a property that is 32K in size with some devices. With the current fixed 3K buffer we use for moving data in and out of the firmware during PROM calls, that simply won't work. In fact, it will scramble random kernel data during bootup. The reasoning behind the temporary buffer is entirely historical. It used to be the case that we had problems referencing dynamic kernel memory (including the stack) early in the boot process before we explicitly told the firwmare to switch us over to the kernel trap table. So what we did was always give the firmware buffers that were locked into the main kernel image. But we no longer have problems like that, so get rid of all of this indirect bounce buffering. Besides fixing Meelis's bug, this also makes the kernel data about 3K smaller. It was also discovered during these conversions that the implementation of prom_retain() was completely wrong, so that was fixed here as well. Currently that interface is not in use. Reported-by: Meelis Roos <mroos@linux.ee> Tested-by: Meelis Roos <mroos@linux.ee> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-24 14:10:57 +08:00
prom_cif_direct(args);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
prom_world(0);
sparc64: Make prom entry spinlock NMI safe. If we do something like try to print to the OF console from an NMI while we're already in OpenFirmware, we'll deadlock on the spinlock. Use a raw spinlock and disable NMIs when we take it. Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-04 01:06:03 +08:00
raw_spin_unlock(&prom_entry_lock);
raw_local_irq_restore(flags);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
}
void prom_cif_init(void *cif_handler, void *cif_stack)
{
p1275buf.prom_cif_handler = (void (*)(long *))cif_handler;
p1275buf.prom_cif_stack = (unsigned long)cif_stack;
}