OpenSDV
/
original_kernel
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
original_kernel/Documentation/hwmon/corsair-cpro.rst

42 lines
1.3 KiB
ReStructuredText
Raw Normal View History

hwmon: add Corsair Commander Pro driver This is v7 of a driver for the Corsair Commander Pro. It provides sysfs attributes for: - Reading fan speed - Reading temp sensors - Reading voltage values - Writing pwm and reading last written pwm - Reading fan and temp connection status It is an usb driver, so it needs to be ignored by usbhid. The Corsair Commander Pro is a fan controller and provides no means for user interaction. The two device numbers are there, because there is a slightly different version of the same device. (Only difference seem to be in some presets.) Squashed: hwmon: (corsair-cpro) add fan_target This adds fan_target entries to the corsair-cpro driver. Reading the attribute from the device does not seem possible, so it returns the last set value (same as pwm). send_usb_cmd now has one more argument, which is needed for the fan_target command. hwmon: corsair-cpro: Change to HID driver This changes corsair-cpro to a hid driver using hid reports. Signed-off-by: Marius Zachmann <mail@mariuszachmann.de> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20200626055936.4441-1-mail@mariuszachmann.de Link: https://lore.kernel.org/r/20200709141413.30790-1-mail@mariuszachmann.de [groeck: Squashed follow-up patches to avoid changes in HID code] Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2020-06-26 13:59:36 +08:00
.. SPDX-License-Identifier: GPL-2.0-or-later
Kernel driver corsair-cpro
==========================
Supported devices:
* Corsair Commander Pro
* Corsair Commander Pro (1000D)
Author: Marius Zachmann
Description
-----------
This driver implements the sysfs interface for the Corsair Commander Pro.
The Corsair Commander Pro is a USB device with 6 fan connectors,
4 temperature sensor connectors and 2 Corsair LED connectors.
It can read the voltage levels on the SATA power connector.
Usage Notes
-----------
Since it is a USB device, hotswapping is possible. The device is autodetected.
Sysfs entries
-------------
======================= =====================================================================
in0_input Voltage on SATA 12v
in1_input Voltage on SATA 5v
in2_input Voltage on SATA 3.3v
temp[1-4]_input Temperature on connected temperature sensors
fan[1-6]_input Connected fan rpm.
fan[1-6]_label Shows fan type as detected by the device.
fan[1-6]_target Sets fan speed target rpm.
When reading, it reports the last value if it was set by the driver.
hwmon: (corsair-cpro) add reading pwm values This adds the possibility for reading pwm values. These can not be read if the device is controlled via fan_target or a fan curve and will return an error in this case. Since an error is expected, this adds some rudimentary error handling. Changes: - add CTL_GET_FAN_PWM and use it via get_data - pwm returns -ENODATA if the device returns error 0x12 - fan_target now returns -ENODATA when the driver is started or a pwm value is set. - add ccp_get_errno to determine errno from device error. - get_data now has a parameter to determine whether to read one or two bytes of data. - update documentation - fix missing surname in MAINTAINERS Signed-off-by: Marius Zachmann <mail@mariuszachmann.de> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2020-07-21 16:54:47 +08:00
Otherwise returns an error.
pwm[1-6] Sets the fan speed. Values from 0-255. Can only be read if pwm
was set directly.
hwmon: add Corsair Commander Pro driver This is v7 of a driver for the Corsair Commander Pro. It provides sysfs attributes for: - Reading fan speed - Reading temp sensors - Reading voltage values - Writing pwm and reading last written pwm - Reading fan and temp connection status It is an usb driver, so it needs to be ignored by usbhid. The Corsair Commander Pro is a fan controller and provides no means for user interaction. The two device numbers are there, because there is a slightly different version of the same device. (Only difference seem to be in some presets.) Squashed: hwmon: (corsair-cpro) add fan_target This adds fan_target entries to the corsair-cpro driver. Reading the attribute from the device does not seem possible, so it returns the last set value (same as pwm). send_usb_cmd now has one more argument, which is needed for the fan_target command. hwmon: corsair-cpro: Change to HID driver This changes corsair-cpro to a hid driver using hid reports. Signed-off-by: Marius Zachmann <mail@mariuszachmann.de> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20200626055936.4441-1-mail@mariuszachmann.de Link: https://lore.kernel.org/r/20200709141413.30790-1-mail@mariuszachmann.de [groeck: Squashed follow-up patches to avoid changes in HID code] Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2020-06-26 13:59:36 +08:00
======================= =====================================================================