OpenSDV
/
original_kernel
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
original_kernel/drivers/net/wireless/realtek/rtw88/rx.h

55 lines
2.5 KiB
C
Raw Normal View History

rtw88: new Realtek 802.11ac driver This is a new mac80211 driver for Realtek 802.11ac wireless network chips. rtw88 now supports RTL8822BE/RTL8822CE now, with basic station mode functionalities. The firmware for both can be found at linux-firmware. https://git.kernel.org/pub/scm/linux/kernel/git/firmware/linux-firmware.git For RTL8822BE: rtw88/rtw8822b_fw.bin For RTL8822CE: rtw88/rtw8822c_fw.bin And for now, only PCI buses (RTL8xxxE) are supported. We will add support for USB and SDIO in the future. The bus interface abstraction can be seen in this driver such as hci.h. Most of the hardware setting are the same except for some TRX path or probing setup should be separated. Supported: * Basic STA/AP/ADHOC mode, and TDLS (STA is well tested) Missing feature: * WOW/PNO * USB & SDIO bus (such as RTL8xxxU/RTL8xxxS) * BT coexistence (8822B/8822C are combo ICs) * Multiple interfaces (for now single STA is better supported) * Dynamic hardware calibrations (to improve/stabilize performance) Potential problems: * static calibration spends too much time, and it is painful for driver to leave IDLE state. And slows down associate process. But reload function are under development, will be added soon! * TRX statictics misleading, as we are not reporting status correctly, or say, not reporting for "every" packet. The next patch set should have BT coexistence code since RTL8822B/C are combo ICs, and the driver for BT can be found after Linux Kernel v4.20. So it is better to add it first to make WiFi + BT work concurrently. Although now rtw88 is simple but we are developing more features for it. Even we want to add support for more chips such as RTL8821C/RTL8814B. Finally, rtw88 has many authors, listed alphabetically: Ping-Ke Shih <pkshih@realtek.com> Tzu-En Huang <tehuang@realtek.com> Yan-Hsuan Chuang <yhchuang@realtek.com> Reviewed-by: Stanislaw Gruszka <sgruszka@redhat.com> Reviewed-by: Brian Norris <briannorris@chromium.org> Tested-by: Brian Norris <briannorris@chromium.org> Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-04-26 20:17:37 +08:00
/* SPDX-License-Identifier: GPL-2.0 OR BSD-3-Clause */
/* Copyright(c) 2018-2019 Realtek Corporation
*/
#ifndef __RTW_RX_H_
#define __RTW_RX_H_
rtw88: Don't set RX_FLAG_DECRYPTED if packet has no encryption The value of GET_RX_DESC_SWDEC() indicates that if this RX packet requires software decryption or not. And software decryption is required when the packet was encrypted and the hardware failed to decrypt it. So, GET_RX_DESC_SWDEC() is negative does not mean that this packet is decrypted, it might just have no encryption at all. To actually see if the packet is decrypted, driver needs to further check if the hardware has successfully decrypted it, with a specific type of encryption algorithm. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-10-02 14:35:26 +08:00
enum rtw_rx_desc_enc {
RX_DESC_ENC_NONE = 0,
RX_DESC_ENC_WEP40 = 1,
RX_DESC_ENC_TKIP_WO_MIC = 2,
RX_DESC_ENC_TKIP_MIC = 3,
RX_DESC_ENC_AES = 4,
RX_DESC_ENC_WEP104 = 5,
};
rtw88: new Realtek 802.11ac driver This is a new mac80211 driver for Realtek 802.11ac wireless network chips. rtw88 now supports RTL8822BE/RTL8822CE now, with basic station mode functionalities. The firmware for both can be found at linux-firmware. https://git.kernel.org/pub/scm/linux/kernel/git/firmware/linux-firmware.git For RTL8822BE: rtw88/rtw8822b_fw.bin For RTL8822CE: rtw88/rtw8822c_fw.bin And for now, only PCI buses (RTL8xxxE) are supported. We will add support for USB and SDIO in the future. The bus interface abstraction can be seen in this driver such as hci.h. Most of the hardware setting are the same except for some TRX path or probing setup should be separated. Supported: * Basic STA/AP/ADHOC mode, and TDLS (STA is well tested) Missing feature: * WOW/PNO * USB & SDIO bus (such as RTL8xxxU/RTL8xxxS) * BT coexistence (8822B/8822C are combo ICs) * Multiple interfaces (for now single STA is better supported) * Dynamic hardware calibrations (to improve/stabilize performance) Potential problems: * static calibration spends too much time, and it is painful for driver to leave IDLE state. And slows down associate process. But reload function are under development, will be added soon! * TRX statictics misleading, as we are not reporting status correctly, or say, not reporting for "every" packet. The next patch set should have BT coexistence code since RTL8822B/C are combo ICs, and the driver for BT can be found after Linux Kernel v4.20. So it is better to add it first to make WiFi + BT work concurrently. Although now rtw88 is simple but we are developing more features for it. Even we want to add support for more chips such as RTL8821C/RTL8814B. Finally, rtw88 has many authors, listed alphabetically: Ping-Ke Shih <pkshih@realtek.com> Tzu-En Huang <tehuang@realtek.com> Yan-Hsuan Chuang <yhchuang@realtek.com> Reviewed-by: Stanislaw Gruszka <sgruszka@redhat.com> Reviewed-by: Brian Norris <briannorris@chromium.org> Tested-by: Brian Norris <briannorris@chromium.org> Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-04-26 20:17:37 +08:00
#define GET_RX_DESC_PHYST(rxdesc) \
le32_get_bits(*((__le32 *)(rxdesc) + 0x00), BIT(26))
#define GET_RX_DESC_ICV_ERR(rxdesc) \
le32_get_bits(*((__le32 *)(rxdesc) + 0x00), BIT(15))
#define GET_RX_DESC_CRC32(rxdesc) \
le32_get_bits(*((__le32 *)(rxdesc) + 0x00), BIT(14))
#define GET_RX_DESC_SWDEC(rxdesc) \
le32_get_bits(*((__le32 *)(rxdesc) + 0x00), BIT(27))
#define GET_RX_DESC_C2H(rxdesc) \
le32_get_bits(*((__le32 *)(rxdesc) + 0x02), BIT(28))
#define GET_RX_DESC_PKT_LEN(rxdesc) \
le32_get_bits(*((__le32 *)(rxdesc) + 0x00), GENMASK(13, 0))
#define GET_RX_DESC_DRV_INFO_SIZE(rxdesc) \
le32_get_bits(*((__le32 *)(rxdesc) + 0x00), GENMASK(19, 16))
#define GET_RX_DESC_SHIFT(rxdesc) \
le32_get_bits(*((__le32 *)(rxdesc) + 0x00), GENMASK(25, 24))
rtw88: Don't set RX_FLAG_DECRYPTED if packet has no encryption The value of GET_RX_DESC_SWDEC() indicates that if this RX packet requires software decryption or not. And software decryption is required when the packet was encrypted and the hardware failed to decrypt it. So, GET_RX_DESC_SWDEC() is negative does not mean that this packet is decrypted, it might just have no encryption at all. To actually see if the packet is decrypted, driver needs to further check if the hardware has successfully decrypted it, with a specific type of encryption algorithm. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-10-02 14:35:26 +08:00
#define GET_RX_DESC_ENC_TYPE(rxdesc) \
le32_get_bits(*((__le32 *)(rxdesc) + 0x00), GENMASK(22, 20))
rtw88: new Realtek 802.11ac driver This is a new mac80211 driver for Realtek 802.11ac wireless network chips. rtw88 now supports RTL8822BE/RTL8822CE now, with basic station mode functionalities. The firmware for both can be found at linux-firmware. https://git.kernel.org/pub/scm/linux/kernel/git/firmware/linux-firmware.git For RTL8822BE: rtw88/rtw8822b_fw.bin For RTL8822CE: rtw88/rtw8822c_fw.bin And for now, only PCI buses (RTL8xxxE) are supported. We will add support for USB and SDIO in the future. The bus interface abstraction can be seen in this driver such as hci.h. Most of the hardware setting are the same except for some TRX path or probing setup should be separated. Supported: * Basic STA/AP/ADHOC mode, and TDLS (STA is well tested) Missing feature: * WOW/PNO * USB & SDIO bus (such as RTL8xxxU/RTL8xxxS) * BT coexistence (8822B/8822C are combo ICs) * Multiple interfaces (for now single STA is better supported) * Dynamic hardware calibrations (to improve/stabilize performance) Potential problems: * static calibration spends too much time, and it is painful for driver to leave IDLE state. And slows down associate process. But reload function are under development, will be added soon! * TRX statictics misleading, as we are not reporting status correctly, or say, not reporting for "every" packet. The next patch set should have BT coexistence code since RTL8822B/C are combo ICs, and the driver for BT can be found after Linux Kernel v4.20. So it is better to add it first to make WiFi + BT work concurrently. Although now rtw88 is simple but we are developing more features for it. Even we want to add support for more chips such as RTL8821C/RTL8814B. Finally, rtw88 has many authors, listed alphabetically: Ping-Ke Shih <pkshih@realtek.com> Tzu-En Huang <tehuang@realtek.com> Yan-Hsuan Chuang <yhchuang@realtek.com> Reviewed-by: Stanislaw Gruszka <sgruszka@redhat.com> Reviewed-by: Brian Norris <briannorris@chromium.org> Tested-by: Brian Norris <briannorris@chromium.org> Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-04-26 20:17:37 +08:00
#define GET_RX_DESC_RX_RATE(rxdesc) \
le32_get_bits(*((__le32 *)(rxdesc) + 0x03), GENMASK(6, 0))
#define GET_RX_DESC_MACID(rxdesc) \
le32_get_bits(*((__le32 *)(rxdesc) + 0x01), GENMASK(6, 0))
#define GET_RX_DESC_PPDU_CNT(rxdesc) \
le32_get_bits(*((__le32 *)(rxdesc) + 0x02), GENMASK(30, 29))
#define GET_RX_DESC_TSFL(rxdesc) \
le32_get_bits(*((__le32 *)(rxdesc) + 0x05), GENMASK(31, 0))
wifi: rtw88: Add definitions for 8703b chip default_cck_index is used in power track, the rx_cck_agc_report_type for RX PHY status. GET_RX_DESC_BW is an RX descriptor field not used by the other chip drivers. Acked-by: Ping-Ke Shih <pkshih@realtek.com> Tested-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Fiona Klute <fiona.klute@gmx.de> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/20240311103735.615541-4-fiona.klute@gmx.de
2024-03-11 18:37:07 +08:00
#define GET_RX_DESC_BW(rxdesc) \
(le32_get_bits(*((__le32 *)(rxdesc) + 0x04), GENMASK(31, 24)))
rtw88: new Realtek 802.11ac driver This is a new mac80211 driver for Realtek 802.11ac wireless network chips. rtw88 now supports RTL8822BE/RTL8822CE now, with basic station mode functionalities. The firmware for both can be found at linux-firmware. https://git.kernel.org/pub/scm/linux/kernel/git/firmware/linux-firmware.git For RTL8822BE: rtw88/rtw8822b_fw.bin For RTL8822CE: rtw88/rtw8822c_fw.bin And for now, only PCI buses (RTL8xxxE) are supported. We will add support for USB and SDIO in the future. The bus interface abstraction can be seen in this driver such as hci.h. Most of the hardware setting are the same except for some TRX path or probing setup should be separated. Supported: * Basic STA/AP/ADHOC mode, and TDLS (STA is well tested) Missing feature: * WOW/PNO * USB & SDIO bus (such as RTL8xxxU/RTL8xxxS) * BT coexistence (8822B/8822C are combo ICs) * Multiple interfaces (for now single STA is better supported) * Dynamic hardware calibrations (to improve/stabilize performance) Potential problems: * static calibration spends too much time, and it is painful for driver to leave IDLE state. And slows down associate process. But reload function are under development, will be added soon! * TRX statictics misleading, as we are not reporting status correctly, or say, not reporting for "every" packet. The next patch set should have BT coexistence code since RTL8822B/C are combo ICs, and the driver for BT can be found after Linux Kernel v4.20. So it is better to add it first to make WiFi + BT work concurrently. Although now rtw88 is simple but we are developing more features for it. Even we want to add support for more chips such as RTL8821C/RTL8814B. Finally, rtw88 has many authors, listed alphabetically: Ping-Ke Shih <pkshih@realtek.com> Tzu-En Huang <tehuang@realtek.com> Yan-Hsuan Chuang <yhchuang@realtek.com> Reviewed-by: Stanislaw Gruszka <sgruszka@redhat.com> Reviewed-by: Brian Norris <briannorris@chromium.org> Tested-by: Brian Norris <briannorris@chromium.org> Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-04-26 20:17:37 +08:00
void rtw_rx_stats(struct rtw_dev *rtwdev, struct ieee80211_vif *vif,
struct sk_buff *skb);
void rtw_rx_fill_rx_status(struct rtw_dev *rtwdev,
struct rtw_rx_pkt_stat *pkt_stat,
struct ieee80211_hdr *hdr,
struct ieee80211_rx_status *rx_status,
u8 *phy_status);
#endif