solos-pci: ensure all TX packets are aligned to 4 bytes

The FPGA can't handled unaligned DMA (yet). So copy into an aligned buffer,
if skb->data isn't suitably aligned.

Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This commit is contained in:
David Woodhouse 2012-12-19 11:01:21 +00:00 committed by David S. Miller
parent 13af816469
commit 152a2a8b5e
1 changed files with 23 additions and 4 deletions

View File

@ -128,9 +128,11 @@ struct solos_card {
struct sk_buff_head cli_queue[4];
struct sk_buff *tx_skb[4];
struct sk_buff *rx_skb[4];
unsigned char *dma_bounce;
wait_queue_head_t param_wq;
wait_queue_head_t fw_wq;
int using_dma;
int dma_alignment;
int fpga_version;
int buffer_size;
int atmel_flash;
@ -1083,7 +1085,12 @@ static uint32_t fpga_tx(struct solos_card *card)
tx_started |= 1 << port;
oldskb = skb; /* We're done with this skb already */
} else if (skb && card->using_dma) {
SKB_CB(skb)->dma_addr = pci_map_single(card->dev, skb->data,
unsigned char *data = skb->data;
if ((unsigned long)data & card->dma_alignment) {
data = card->dma_bounce + (BUF_SIZE * port);
memcpy(data, skb->data, skb->len);
}
SKB_CB(skb)->dma_addr = pci_map_single(card->dev, data,
skb->len, PCI_DMA_TODEVICE);
card->tx_skb[port] = skb;
iowrite32(SKB_CB(skb)->dma_addr,
@ -1261,18 +1268,27 @@ static int fpga_probe(struct pci_dev *dev, const struct pci_device_id *id)
else
card->atmel_flash = 0;
data32 = ioread32(card->config_regs + PORTS);
card->nr_ports = (data32 & 0x000000FF);
if (card->fpga_version >= DMA_SUPPORTED) {
pci_set_master(dev);
card->using_dma = 1;
if (1) { /* All known FPGA versions so far */
card->dma_alignment = 3;
card->dma_bounce = kmalloc(card->nr_ports * BUF_SIZE, GFP_KERNEL);
if (!card->dma_bounce) {
dev_warn(&card->dev->dev, "Failed to allocate DMA bounce buffers\n");
/* Fallback to MMIO doesn't work */
goto out_unmap_both;
}
}
} else {
card->using_dma = 0;
/* Set RX empty flag for all ports */
iowrite32(0xF0, card->config_regs + FLAGS_ADDR);
}
data32 = ioread32(card->config_regs + PORTS);
card->nr_ports = (data32 & 0x000000FF);
pci_set_drvdata(dev, card);
tasklet_init(&card->tlet, solos_bh, (unsigned long)card);
@ -1319,6 +1335,7 @@ static int fpga_probe(struct pci_dev *dev, const struct pci_device_id *id)
tasklet_kill(&card->tlet);
out_unmap_both:
kfree(card->dma_bounce);
pci_set_drvdata(dev, NULL);
pci_iounmap(dev, card->buffers);
out_unmap_config:
@ -1429,6 +1446,8 @@ static void fpga_remove(struct pci_dev *dev)
free_irq(dev->irq, card);
tasklet_kill(&card->tlet);
kfree(card->dma_bounce);
/* Release device from reset */
iowrite32(0, card->config_regs + FPGA_MODE);
(void)ioread32(card->config_regs + FPGA_MODE);