From 8a01ef749b0a632f0e1f4ead0f08b3310d99fcb1 Mon Sep 17 00:00:00 2001 From: David Lechner Date: Fri, 3 May 2024 14:45:05 -0500 Subject: [PATCH 01/25] iio: adc: ad9467: fix scan type sign According to the IIO documentation, the sign in the scan type should be lower case. The ad9467 driver was incorrectly using upper case. Fix by changing to lower case. Fixes: 4606d0f4b05f ("iio: adc: ad9467: add support for AD9434 high-speed ADC") Fixes: ad6797120238 ("iio: adc: ad9467: add support AD9467 ADC") Signed-off-by: David Lechner Link: https://lore.kernel.org/r/20240503-ad9467-fix-scan-type-sign-v1-1-c7a1a066ebb9@baylibre.com Cc: Signed-off-by: Jonathan Cameron --- drivers/iio/adc/ad9467.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/iio/adc/ad9467.c b/drivers/iio/adc/ad9467.c index e85b763b9ffc..8f5b9c3f6e3d 100644 --- a/drivers/iio/adc/ad9467.c +++ b/drivers/iio/adc/ad9467.c @@ -243,11 +243,11 @@ static void __ad9467_get_scale(struct ad9467_state *st, int index, } static const struct iio_chan_spec ad9434_channels[] = { - AD9467_CHAN(0, 0, 12, 'S'), + AD9467_CHAN(0, 0, 12, 's'), }; static const struct iio_chan_spec ad9467_channels[] = { - AD9467_CHAN(0, 0, 16, 'S'), + AD9467_CHAN(0, 0, 16, 's'), }; static const struct ad9467_chip_info ad9467_chip_tbl = { From 72d0a20fabcf231c9b4b17b0cabdcde0949d05eb Mon Sep 17 00:00:00 2001 From: Angelo Dureghello Date: Fri, 3 May 2024 20:55:28 +0200 Subject: [PATCH 02/25] dt-bindings: iio: dac: fix ad354xr output range Fix output range, as per datasheet must be -2.5 to 7.5. Signed-off-by: Angelo Dureghello Fixes: b0a96c5f599e ("dt-bindings: iio: dac: Add adi,ad3552r.yaml") Acked-by: Krzysztof Kozlowski Link: https://lore.kernel.org/r/20240503185528.2043127-1-adureghello@baylibre.org Signed-off-by: Jonathan Cameron --- Documentation/devicetree/bindings/iio/dac/adi,ad3552r.yaml | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Documentation/devicetree/bindings/iio/dac/adi,ad3552r.yaml b/Documentation/devicetree/bindings/iio/dac/adi,ad3552r.yaml index 96340a05754c..8265d709094d 100644 --- a/Documentation/devicetree/bindings/iio/dac/adi,ad3552r.yaml +++ b/Documentation/devicetree/bindings/iio/dac/adi,ad3552r.yaml @@ -139,7 +139,7 @@ allOf: Voltage output range of the channel as Required connections: Rfb1x for: 0 to 2.5 V; 0 to 3V; 0 to 5 V; - Rfb2x for: 0 to 10 V; 2.5 to 7.5V; -5 to 5 V; + Rfb2x for: 0 to 10 V; -2.5 to 7.5V; -5 to 5 V; oneOf: - items: - const: 0 From 0f0f6306617cb4b6231fc9d4ec68ab9a56dba7c0 Mon Sep 17 00:00:00 2001 From: Adam Rizkalla Date: Thu, 25 Apr 2024 01:22:49 -0500 Subject: [PATCH 03/25] iio: pressure: bmp280: Fix BMP580 temperature reading Fix overflow issue when storing BMP580 temperature reading and properly preserve sign of 24-bit data. Signed-off-by: Adam Rizkalla Tested-By: Vasileios Amoiridis Acked-by: Angel Iglesias Link: https://lore.kernel.org/r/Zin2udkXRD0+GrML@adam-asahi.lan Cc: Signed-off-by: Jonathan Cameron --- drivers/iio/pressure/bmp280-core.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) diff --git a/drivers/iio/pressure/bmp280-core.c b/drivers/iio/pressure/bmp280-core.c index 09f53d987c7d..221fa2c552ae 100644 --- a/drivers/iio/pressure/bmp280-core.c +++ b/drivers/iio/pressure/bmp280-core.c @@ -1394,12 +1394,12 @@ static int bmp580_read_temp(struct bmp280_data *data, int *val, int *val2) /* * Temperature is returned in Celsius degrees in fractional - * form down 2^16. We rescale by x1000 to return milli Celsius - * to respect IIO ABI. + * form down 2^16. We rescale by x1000 to return millidegrees + * Celsius to respect IIO ABI. */ - *val = raw_temp * 1000; - *val2 = 16; - return IIO_VAL_FRACTIONAL_LOG2; + raw_temp = sign_extend32(raw_temp, 23); + *val = ((s64)raw_temp * 1000) / (1 << 16); + return IIO_VAL_INT; } static int bmp580_read_press(struct bmp280_data *data, int *val, int *val2) From 279428df888319bf68f2686934897301a250bb84 Mon Sep 17 00:00:00 2001 From: Marc Ferland Date: Wed, 1 May 2024 11:05:54 -0400 Subject: [PATCH 04/25] iio: dac: ad5592r: fix temperature channel scaling value The scale value for the temperature channel is (assuming Vref=2.5 and the datasheet): 376.7897513 When calculating both val and val2 for the temperature scale we use (3767897513/25) and multiply it by Vref (here I assume 2500mV) to obtain: 2500 * (3767897513/25) ==> 376789751300 Finally we divide with remainder by 10^9 to get: val = 376 val2 = 789751300 However, we return IIO_VAL_INT_PLUS_MICRO (should have been NANO) as the scale type. So when converting the raw temperature value to the 'processed' temperature value we will get (assuming raw=810, offset=-753): processed = (raw + offset) * scale_val = (810 + -753) * 376 = 21432 processed += div((raw + offset) * scale_val2, 10^6) += div((810 + -753) * 789751300, 10^6) += 45015 ==> 66447 ==> 66.4 Celcius instead of the expected 21.5 Celsius. Fix this issue by changing IIO_VAL_INT_PLUS_MICRO to IIO_VAL_INT_PLUS_NANO. Fixes: 56ca9db862bf ("iio: dac: Add support for the AD5592R/AD5593R ADCs/DACs") Signed-off-by: Marc Ferland Link: https://lore.kernel.org/r/20240501150554.1871390-1-marc.ferland@sonatest.com Cc: Signed-off-by: Jonathan Cameron --- drivers/iio/dac/ad5592r-base.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/iio/dac/ad5592r-base.c b/drivers/iio/dac/ad5592r-base.c index 076bc9ecfb49..4763402dbcd6 100644 --- a/drivers/iio/dac/ad5592r-base.c +++ b/drivers/iio/dac/ad5592r-base.c @@ -415,7 +415,7 @@ static int ad5592r_read_raw(struct iio_dev *iio_dev, s64 tmp = *val * (3767897513LL / 25LL); *val = div_s64_rem(tmp, 1000000000LL, val2); - return IIO_VAL_INT_PLUS_MICRO; + return IIO_VAL_INT_PLUS_NANO; } mutex_lock(&st->lock); From bedb2ccb566de5ca0c336ca3fd3588cea6d50414 Mon Sep 17 00:00:00 2001 From: Vasileios Amoiridis Date: Wed, 8 May 2024 17:54:07 +0200 Subject: [PATCH 05/25] iio: imu: bmi323: Fix trigger notification in case of error In case of error in the bmi323_trigger_handler() function, the function exits without calling the iio_trigger_notify_done() which is responsible for informing the attached trigger that the process is done and in case there is a .reenable(), to call it. Fixes: 8a636db3aa57 ("iio: imu: Add driver for BMI323 IMU") Signed-off-by: Vasileios Amoiridis Link: https://lore.kernel.org/r/20240508155407.139805-1-vassilisamir@gmail.com Cc: Signed-off-by: Jonathan Cameron --- drivers/iio/imu/bmi323/bmi323_core.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/drivers/iio/imu/bmi323/bmi323_core.c b/drivers/iio/imu/bmi323/bmi323_core.c index 5d42ab9b176a..67d74a1a1b26 100644 --- a/drivers/iio/imu/bmi323/bmi323_core.c +++ b/drivers/iio/imu/bmi323/bmi323_core.c @@ -1391,7 +1391,7 @@ static irqreturn_t bmi323_trigger_handler(int irq, void *p) &data->buffer.channels, ARRAY_SIZE(data->buffer.channels)); if (ret) - return IRQ_NONE; + goto out; } else { for_each_set_bit(bit, indio_dev->active_scan_mask, BMI323_CHAN_MAX) { @@ -1400,13 +1400,14 @@ static irqreturn_t bmi323_trigger_handler(int irq, void *p) &data->buffer.channels[index++], BMI323_BYTES_PER_SAMPLE); if (ret) - return IRQ_NONE; + goto out; } } iio_push_to_buffers_with_timestamp(indio_dev, &data->buffer, iio_get_time_ns(indio_dev)); +out: iio_trigger_notify_done(indio_dev->trig); return IRQ_HANDLED; From a23c14b062d8800a2192077d83273bbfe6c7552d Mon Sep 17 00:00:00 2001 From: Harshit Mogalapalli Date: Mon, 13 May 2024 13:34:27 -0700 Subject: [PATCH 06/25] iio: temperature: mlx90635: Fix ERR_PTR dereference in mlx90635_probe() When devm_regmap_init_i2c() fails, regmap_ee could be error pointer, instead of checking for IS_ERR(regmap_ee), regmap is checked which looks like a copy paste error. Fixes: a1d1ba5e1c28 ("iio: temperature: mlx90635 MLX90635 IR Temperature sensor") Reviewed-by: Crt Mori Signed-off-by: Harshit Mogalapalli Link: https://lore.kernel.org/r/20240513203427.3208696-1-harshit.m.mogalapalli@oracle.com Cc: Signed-off-by: Jonathan Cameron --- drivers/iio/temperature/mlx90635.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/iio/temperature/mlx90635.c b/drivers/iio/temperature/mlx90635.c index 1f5c962c1818..f7f88498ba0e 100644 --- a/drivers/iio/temperature/mlx90635.c +++ b/drivers/iio/temperature/mlx90635.c @@ -947,9 +947,9 @@ static int mlx90635_probe(struct i2c_client *client) "failed to allocate regmap\n"); regmap_ee = devm_regmap_init_i2c(client, &mlx90635_regmap_ee); - if (IS_ERR(regmap)) - return dev_err_probe(&client->dev, PTR_ERR(regmap), - "failed to allocate regmap\n"); + if (IS_ERR(regmap_ee)) + return dev_err_probe(&client->dev, PTR_ERR(regmap_ee), + "failed to allocate EEPROM regmap\n"); mlx90635 = iio_priv(indio_dev); i2c_set_clientdata(client, indio_dev); From ab6f0ab178137170a6b40f8f3d7a3806708a202c Mon Sep 17 00:00:00 2001 From: Dumitru Ceclan Date: Tue, 21 May 2024 11:45:39 +0300 Subject: [PATCH 07/25] iio: adc: ad7173: fix buffers enablement for ad7176-2 AD7176-2 does not feature input buffers and marks corespondent register bits as read only. Enable buffers only on supported models. Fixes: 76a1e6a42802 ("iio: adc: ad7173: add AD7173 driver") Reviewed-by: David Lechner Signed-off-by: Dumitru Ceclan Link: https://lore.kernel.org/r/20240521-ad7173-fixes-v1-1-8161cc7f3ad1@analog.com Signed-off-by: Jonathan Cameron --- drivers/iio/adc/ad7173.c | 12 ++++++++++-- 1 file changed, 10 insertions(+), 2 deletions(-) diff --git a/drivers/iio/adc/ad7173.c b/drivers/iio/adc/ad7173.c index a7826bba0852..91acedaddb57 100644 --- a/drivers/iio/adc/ad7173.c +++ b/drivers/iio/adc/ad7173.c @@ -145,6 +145,7 @@ struct ad7173_device_info { unsigned int id; char *name; bool has_temp; + bool has_input_buf; bool has_int_ref; bool has_ref2; u8 num_gpios; @@ -212,6 +213,7 @@ static const struct ad7173_device_info ad7173_device_info[] = { .num_configs = 4, .num_gpios = 2, .has_temp = true, + .has_input_buf = true, .has_int_ref = true, .clock = 2 * HZ_PER_MHZ, .sinc5_data_rates = ad7173_sinc5_data_rates, @@ -224,6 +226,7 @@ static const struct ad7173_device_info ad7173_device_info[] = { .num_configs = 8, .num_gpios = 4, .has_temp = false, + .has_input_buf = true, .has_ref2 = true, .clock = 2 * HZ_PER_MHZ, .sinc5_data_rates = ad7173_sinc5_data_rates, @@ -237,6 +240,7 @@ static const struct ad7173_device_info ad7173_device_info[] = { .num_configs = 8, .num_gpios = 4, .has_temp = true, + .has_input_buf = true, .has_int_ref = true, .has_ref2 = true, .clock = 2 * HZ_PER_MHZ, @@ -251,6 +255,7 @@ static const struct ad7173_device_info ad7173_device_info[] = { .num_configs = 4, .num_gpios = 2, .has_temp = true, + .has_input_buf = true, .has_int_ref = true, .clock = 16 * HZ_PER_MHZ, .sinc5_data_rates = ad7175_sinc5_data_rates, @@ -263,6 +268,7 @@ static const struct ad7173_device_info ad7173_device_info[] = { .num_configs = 8, .num_gpios = 4, .has_temp = true, + .has_input_buf = true, .has_int_ref = true, .has_ref2 = true, .clock = 16 * HZ_PER_MHZ, @@ -277,6 +283,7 @@ static const struct ad7173_device_info ad7173_device_info[] = { .num_configs = 4, .num_gpios = 2, .has_temp = false, + .has_input_buf = false, .has_int_ref = true, .clock = 16 * HZ_PER_MHZ, .sinc5_data_rates = ad7175_sinc5_data_rates, @@ -289,6 +296,7 @@ static const struct ad7173_device_info ad7173_device_info[] = { .num_configs = 4, .num_gpios = 2, .has_temp = true, + .has_input_buf = true, .has_int_ref = true, .clock = 16 * HZ_PER_MHZ, .odr_start_value = AD7177_ODR_START_VALUE, @@ -932,7 +940,7 @@ static int ad7173_fw_parse_channel_config(struct iio_dev *indio_dev) AD7173_CH_ADDRESS(chan_arr[chan_index].channel, chan_arr[chan_index].channel2); chan_st_priv->cfg.bipolar = false; - chan_st_priv->cfg.input_buf = true; + chan_st_priv->cfg.input_buf = st->info->has_input_buf; chan_st_priv->cfg.ref_sel = AD7173_SETUP_REF_SEL_INT_REF; st->adc_mode |= AD7173_ADC_MODE_REF_EN; @@ -989,7 +997,7 @@ static int ad7173_fw_parse_channel_config(struct iio_dev *indio_dev) chan_st_priv->ain = AD7173_CH_ADDRESS(ain[0], ain[1]); chan_st_priv->chan_reg = chan_index; - chan_st_priv->cfg.input_buf = true; + chan_st_priv->cfg.input_buf = st->info->has_input_buf; chan_st_priv->cfg.odr = 0; chan_st_priv->cfg.bipolar = fwnode_property_read_bool(child, "bipolar"); From 3450ee7e800a8dc83290780c1b6ef66898e709d3 Mon Sep 17 00:00:00 2001 From: Dumitru Ceclan Date: Tue, 21 May 2024 11:45:40 +0300 Subject: [PATCH 08/25] iio: adc: ad7173: Add ad7173_device_info names Add missing names from the device info struct for 3 models to ensure consistency with the rest of the models. Fixes: 76a1e6a42802 ("iio: adc: ad7173: add AD7173 driver") Signed-off-by: Dumitru Ceclan Link: https://lore.kernel.org/r/20240521-ad7173-fixes-v1-2-8161cc7f3ad1@analog.com Signed-off-by: Jonathan Cameron --- drivers/iio/adc/ad7173.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/iio/adc/ad7173.c b/drivers/iio/adc/ad7173.c index 91acedaddb57..4649af5f9d76 100644 --- a/drivers/iio/adc/ad7173.c +++ b/drivers/iio/adc/ad7173.c @@ -220,6 +220,7 @@ static const struct ad7173_device_info ad7173_device_info[] = { .num_sinc5_data_rates = ARRAY_SIZE(ad7173_sinc5_data_rates), }, [ID_AD7172_4] = { + .name = "ad7172-4", .id = AD7172_4_ID, .num_inputs = 9, .num_channels = 8, @@ -262,6 +263,7 @@ static const struct ad7173_device_info ad7173_device_info[] = { .num_sinc5_data_rates = ARRAY_SIZE(ad7175_sinc5_data_rates), }, [ID_AD7175_8] = { + .name = "ad7175-8", .id = AD7175_8_ID, .num_inputs = 17, .num_channels = 16, @@ -290,6 +292,7 @@ static const struct ad7173_device_info ad7173_device_info[] = { .num_sinc5_data_rates = ARRAY_SIZE(ad7175_sinc5_data_rates), }, [ID_AD7177_2] = { + .name = "ad7177-2", .id = AD7177_ID, .num_inputs = 5, .num_channels = 4, From f00dd8953094091a8e9c8cc00661d01c33b93615 Mon Sep 17 00:00:00 2001 From: Dumitru Ceclan Date: Tue, 21 May 2024 11:45:41 +0300 Subject: [PATCH 09/25] iio: adc: ad7173: Remove index from temp channel Temperature channel is unique per device, index is not needed. This is breaking userspace: Include fixes tag to be released within the same rc cycle. Fixes: 76a1e6a42802 ("iio: adc: ad7173: add AD7173 driver") Signed-off-by: Dumitru Ceclan Link: https://lore.kernel.org/r/20240521-ad7173-fixes-v1-3-8161cc7f3ad1@analog.com Signed-off-by: Jonathan Cameron --- drivers/iio/adc/ad7173.c | 1 - 1 file changed, 1 deletion(-) diff --git a/drivers/iio/adc/ad7173.c b/drivers/iio/adc/ad7173.c index 4649af5f9d76..048127bf979a 100644 --- a/drivers/iio/adc/ad7173.c +++ b/drivers/iio/adc/ad7173.c @@ -815,7 +815,6 @@ static const struct iio_chan_spec ad7173_channel_template = { static const struct iio_chan_spec ad7173_temp_iio_channel_template = { .type = IIO_TEMP, - .indexed = 1, .channel = AD7173_AIN_TEMP_POS, .channel2 = AD7173_AIN_TEMP_NEG, .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | From 95444b9eeb8c5c0330563931d70c61ca3b101548 Mon Sep 17 00:00:00 2001 From: Jean-Baptiste Maneyrol Date: Fri, 24 May 2024 12:48:51 +0000 Subject: [PATCH 10/25] iio: invensense: fix odr switching to same value ODR switching happens in 2 steps, update to store the new value and then apply when the ODR change flag is received in the data. When switching to the same ODR value, the ODR change flag is never happening, and frequency switching is blocked waiting for the never coming apply. Fix the issue by preventing update to happen when switching to same ODR value. Fixes: 0ecc363ccea7 ("iio: make invensense timestamp module generic") Cc: stable@vger.kernel.org Signed-off-by: Jean-Baptiste Maneyrol Link: https://lore.kernel.org/r/20240524124851.567485-1-inv.git-commit@tdk.com Signed-off-by: Jonathan Cameron --- drivers/iio/common/inv_sensors/inv_sensors_timestamp.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/drivers/iio/common/inv_sensors/inv_sensors_timestamp.c b/drivers/iio/common/inv_sensors/inv_sensors_timestamp.c index fa205f17bd90..f44458c380d9 100644 --- a/drivers/iio/common/inv_sensors/inv_sensors_timestamp.c +++ b/drivers/iio/common/inv_sensors/inv_sensors_timestamp.c @@ -60,11 +60,15 @@ EXPORT_SYMBOL_NS_GPL(inv_sensors_timestamp_init, IIO_INV_SENSORS_TIMESTAMP); int inv_sensors_timestamp_update_odr(struct inv_sensors_timestamp *ts, uint32_t period, bool fifo) { + uint32_t mult; + /* when FIFO is on, prevent odr change if one is already pending */ if (fifo && ts->new_mult != 0) return -EAGAIN; - ts->new_mult = period / ts->chip.clock_period; + mult = period / ts->chip.clock_period; + if (mult != ts->mult) + ts->new_mult = mult; return 0; } From d7bd473632d07f8a54655c270c0940cc3671c548 Mon Sep 17 00:00:00 2001 From: Jean-Baptiste Maneyrol Date: Wed, 29 May 2024 15:47:17 +0000 Subject: [PATCH 11/25] iio: imu: inv_icm42600: stabilized timestamp in interrupt Use IRQF_ONESHOT flag to ensure the timestamp is not updated in the hard handler during the thread handler. And compute and use the effective watermark value that correspond to this first timestamp. This way we can ensure the timestamp is always corresponding to the value used by the timestamping mechanism. Otherwise, it is possible that between FIFO count read and FIFO processing the timestamp is overwritten in the hard handler. Fixes: ec74ae9fd37c ("iio: imu: inv_icm42600: add accurate timestamping") Cc: stable@vger.kernel.org Signed-off-by: Jean-Baptiste Maneyrol Link: https://lore.kernel.org/r/20240529154717.651863-1-inv.git-commit@tdk.com Signed-off-by: Jonathan Cameron --- .../imu/inv_icm42600/inv_icm42600_buffer.c | 19 +++++++++++++++++-- .../imu/inv_icm42600/inv_icm42600_buffer.h | 2 ++ .../iio/imu/inv_icm42600/inv_icm42600_core.c | 1 + 3 files changed, 20 insertions(+), 2 deletions(-) diff --git a/drivers/iio/imu/inv_icm42600/inv_icm42600_buffer.c b/drivers/iio/imu/inv_icm42600/inv_icm42600_buffer.c index 63b85ec88c13..a8cf74c84c3c 100644 --- a/drivers/iio/imu/inv_icm42600/inv_icm42600_buffer.c +++ b/drivers/iio/imu/inv_icm42600/inv_icm42600_buffer.c @@ -222,10 +222,15 @@ int inv_icm42600_buffer_update_watermark(struct inv_icm42600_state *st) latency_accel = period_accel * wm_accel; /* 0 value for watermark means that the sensor is turned off */ + if (wm_gyro == 0 && wm_accel == 0) + return 0; + if (latency_gyro == 0) { watermark = wm_accel; + st->fifo.watermark.eff_accel = wm_accel; } else if (latency_accel == 0) { watermark = wm_gyro; + st->fifo.watermark.eff_gyro = wm_gyro; } else { /* compute the smallest latency that is a multiple of both */ if (latency_gyro <= latency_accel) @@ -241,6 +246,13 @@ int inv_icm42600_buffer_update_watermark(struct inv_icm42600_state *st) watermark = latency / period; if (watermark < 1) watermark = 1; + /* update effective watermark */ + st->fifo.watermark.eff_gyro = latency / period_gyro; + if (st->fifo.watermark.eff_gyro < 1) + st->fifo.watermark.eff_gyro = 1; + st->fifo.watermark.eff_accel = latency / period_accel; + if (st->fifo.watermark.eff_accel < 1) + st->fifo.watermark.eff_accel = 1; } /* compute watermark value in bytes */ @@ -514,7 +526,7 @@ int inv_icm42600_buffer_fifo_parse(struct inv_icm42600_state *st) /* handle gyroscope timestamp and FIFO data parsing */ if (st->fifo.nb.gyro > 0) { ts = &gyro_st->ts; - inv_sensors_timestamp_interrupt(ts, st->fifo.nb.gyro, + inv_sensors_timestamp_interrupt(ts, st->fifo.watermark.eff_gyro, st->timestamp.gyro); ret = inv_icm42600_gyro_parse_fifo(st->indio_gyro); if (ret) @@ -524,7 +536,7 @@ int inv_icm42600_buffer_fifo_parse(struct inv_icm42600_state *st) /* handle accelerometer timestamp and FIFO data parsing */ if (st->fifo.nb.accel > 0) { ts = &accel_st->ts; - inv_sensors_timestamp_interrupt(ts, st->fifo.nb.accel, + inv_sensors_timestamp_interrupt(ts, st->fifo.watermark.eff_accel, st->timestamp.accel); ret = inv_icm42600_accel_parse_fifo(st->indio_accel); if (ret) @@ -577,6 +589,9 @@ int inv_icm42600_buffer_init(struct inv_icm42600_state *st) unsigned int val; int ret; + st->fifo.watermark.eff_gyro = 1; + st->fifo.watermark.eff_accel = 1; + /* * Default FIFO configuration (bits 7 to 5) * - use invalid value diff --git a/drivers/iio/imu/inv_icm42600/inv_icm42600_buffer.h b/drivers/iio/imu/inv_icm42600/inv_icm42600_buffer.h index 8b85ee333bf8..f6c85daf42b0 100644 --- a/drivers/iio/imu/inv_icm42600/inv_icm42600_buffer.h +++ b/drivers/iio/imu/inv_icm42600/inv_icm42600_buffer.h @@ -32,6 +32,8 @@ struct inv_icm42600_fifo { struct { unsigned int gyro; unsigned int accel; + unsigned int eff_gyro; + unsigned int eff_accel; } watermark; size_t count; struct { diff --git a/drivers/iio/imu/inv_icm42600/inv_icm42600_core.c b/drivers/iio/imu/inv_icm42600/inv_icm42600_core.c index 96116a68ab29..62fdae530334 100644 --- a/drivers/iio/imu/inv_icm42600/inv_icm42600_core.c +++ b/drivers/iio/imu/inv_icm42600/inv_icm42600_core.c @@ -537,6 +537,7 @@ static int inv_icm42600_irq_init(struct inv_icm42600_state *st, int irq, if (ret) return ret; + irq_type |= IRQF_ONESHOT; return devm_request_threaded_irq(dev, irq, inv_icm42600_irq_timestamp, inv_icm42600_irq_handler, irq_type, "inv_icm42600", st); From 245f3b149e6cc3ac6ee612cdb7042263bfc9e73c Mon Sep 17 00:00:00 2001 From: Jean-Baptiste Maneyrol Date: Mon, 27 May 2024 21:00:08 +0000 Subject: [PATCH 12/25] iio: imu: inv_icm42600: delete unneeded update watermark call Update watermark will be done inside the hwfifo_set_watermark callback just after the update_scan_mode. It is useless to do it here. Fixes: 7f85e42a6c54 ("iio: imu: inv_icm42600: add buffer support in iio devices") Cc: stable@vger.kernel.org Signed-off-by: Jean-Baptiste Maneyrol Link: https://lore.kernel.org/r/20240527210008.612932-1-inv.git-commit@tdk.com Signed-off-by: Jonathan Cameron --- drivers/iio/imu/inv_icm42600/inv_icm42600_accel.c | 4 ---- drivers/iio/imu/inv_icm42600/inv_icm42600_gyro.c | 4 ---- 2 files changed, 8 deletions(-) diff --git a/drivers/iio/imu/inv_icm42600/inv_icm42600_accel.c b/drivers/iio/imu/inv_icm42600/inv_icm42600_accel.c index 83d8504ebfff..4b2566693614 100644 --- a/drivers/iio/imu/inv_icm42600/inv_icm42600_accel.c +++ b/drivers/iio/imu/inv_icm42600/inv_icm42600_accel.c @@ -130,10 +130,6 @@ static int inv_icm42600_accel_update_scan_mode(struct iio_dev *indio_dev, /* update data FIFO write */ inv_sensors_timestamp_apply_odr(ts, 0, 0, 0); ret = inv_icm42600_buffer_set_fifo_en(st, fifo_en | st->fifo.en); - if (ret) - goto out_unlock; - - ret = inv_icm42600_buffer_update_watermark(st); out_unlock: mutex_unlock(&st->lock); diff --git a/drivers/iio/imu/inv_icm42600/inv_icm42600_gyro.c b/drivers/iio/imu/inv_icm42600/inv_icm42600_gyro.c index e6f8de80128c..938af5b640b0 100644 --- a/drivers/iio/imu/inv_icm42600/inv_icm42600_gyro.c +++ b/drivers/iio/imu/inv_icm42600/inv_icm42600_gyro.c @@ -130,10 +130,6 @@ static int inv_icm42600_gyro_update_scan_mode(struct iio_dev *indio_dev, /* update data FIFO write */ inv_sensors_timestamp_apply_odr(ts, 0, 0, 0); ret = inv_icm42600_buffer_set_fifo_en(st, fifo_en | st->fifo.en); - if (ret) - goto out_unlock; - - ret = inv_icm42600_buffer_update_watermark(st); out_unlock: mutex_unlock(&st->lock); From 18befe4a28403f599115c5ae753cc7f5157af8b7 Mon Sep 17 00:00:00 2001 From: Dumitru Ceclan Date: Thu, 30 May 2024 15:07:52 +0300 Subject: [PATCH 13/25] iio: adc: ad7173: Clear append status bit The previous value of the append status bit was not cleared before setting the new value. This caused the bit to remain set after enabling buffered mode for multiple channels and not permit further buffered reads from a single channel after the fact. Fixes: 76a1e6a42802 ("iio: adc: ad7173: add AD7173 driver") Signed-off-by: Dumitru Ceclan Link: https://lore.kernel.org/r/20240530-ad7173-fixes-v3-4-b85f33079e18@analog.com Signed-off-by: Jonathan Cameron --- drivers/iio/adc/ad7173.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/iio/adc/ad7173.c b/drivers/iio/adc/ad7173.c index 048127bf979a..e2f17292409c 100644 --- a/drivers/iio/adc/ad7173.c +++ b/drivers/iio/adc/ad7173.c @@ -543,6 +543,7 @@ static int ad7173_append_status(struct ad_sigma_delta *sd, bool append) unsigned int interface_mode = st->interface_mode; int ret; + interface_mode &= ~AD7173_INTERFACE_DATA_STAT; interface_mode |= AD7173_INTERFACE_DATA_STAT_EN(append); ret = ad_sd_write_reg(&st->sd, AD7173_REG_INTERFACE_MODE, 2, interface_mode); if (ret) From 182bc496dc63ca03986e3c393166477f4a4c2742 Mon Sep 17 00:00:00 2001 From: Dumitru Ceclan Date: Thu, 30 May 2024 15:07:53 +0300 Subject: [PATCH 14/25] iio: adc: ad7173: Fix sampling frequency setting This patch fixes two issues regarding the sampling frequency setting: -The attribute was set as per device, not per channel. As such, when setting the sampling frequency, the configuration was always done for the slot 0, and the correct configuration was applied on the next channel configuration call by the LRU mechanism. -The LRU implementation does not take into account external settings of the slot registers. When setting the sampling frequency directly to a slot register in write_raw(), there is no guarantee that other channels were not also using that slot and now incorrectly retain their config as live. Set the sampling frequency attribute as separate in the channel templates. Do not set the sampling directly to the slot register in write_raw(), just mark the config as not live and let the LRU mechanism handle it. As the reg variable is no longer used, remove it. Fixes: 76a1e6a42802 ("iio: adc: ad7173: add AD7173 driver") Signed-off-by: Dumitru Ceclan Link: https://lore.kernel.org/r/20240530-ad7173-fixes-v3-5-b85f33079e18@analog.com Signed-off-by: Jonathan Cameron --- drivers/iio/adc/ad7173.c | 20 +++++--------------- 1 file changed, 5 insertions(+), 15 deletions(-) diff --git a/drivers/iio/adc/ad7173.c b/drivers/iio/adc/ad7173.c index e2f17292409c..b26d4575e256 100644 --- a/drivers/iio/adc/ad7173.c +++ b/drivers/iio/adc/ad7173.c @@ -717,7 +717,7 @@ static int ad7173_write_raw(struct iio_dev *indio_dev, { struct ad7173_state *st = iio_priv(indio_dev); struct ad7173_channel_config *cfg; - unsigned int freq, i, reg; + unsigned int freq, i; int ret; ret = iio_device_claim_direct_mode(indio_dev); @@ -733,16 +733,7 @@ static int ad7173_write_raw(struct iio_dev *indio_dev, cfg = &st->channels[chan->address].cfg; cfg->odr = i; - - if (!cfg->live) - break; - - ret = ad_sd_read_reg(&st->sd, AD7173_REG_FILTER(cfg->cfg_slot), 2, ®); - if (ret) - break; - reg &= ~AD7173_FILTER_ODR0_MASK; - reg |= FIELD_PREP(AD7173_FILTER_ODR0_MASK, i); - ret = ad_sd_write_reg(&st->sd, AD7173_REG_FILTER(cfg->cfg_slot), 2, reg); + cfg->live = false; break; default: @@ -804,8 +795,7 @@ static const struct iio_chan_spec ad7173_channel_template = { .type = IIO_VOLTAGE, .indexed = 1, .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | - BIT(IIO_CHAN_INFO_SCALE), - .info_mask_shared_by_all = BIT(IIO_CHAN_INFO_SAMP_FREQ), + BIT(IIO_CHAN_INFO_SCALE) | BIT(IIO_CHAN_INFO_SAMP_FREQ), .scan_type = { .sign = 'u', .realbits = 24, @@ -819,8 +809,8 @@ static const struct iio_chan_spec ad7173_temp_iio_channel_template = { .channel = AD7173_AIN_TEMP_POS, .channel2 = AD7173_AIN_TEMP_NEG, .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | - BIT(IIO_CHAN_INFO_SCALE) | BIT(IIO_CHAN_INFO_OFFSET), - .info_mask_shared_by_all = BIT(IIO_CHAN_INFO_SAMP_FREQ), + BIT(IIO_CHAN_INFO_SCALE) | BIT(IIO_CHAN_INFO_OFFSET) | + BIT(IIO_CHAN_INFO_SAMP_FREQ), .scan_type = { .sign = 'u', .realbits = 24, From 8844ed0a6e063acf7173b231021b2d301e31ded9 Mon Sep 17 00:00:00 2001 From: Jean-Baptiste Maneyrol Date: Mon, 27 May 2024 15:01:17 +0000 Subject: [PATCH 15/25] iio: imu: inv_mpu6050: stabilized timestamping in interrupt Use IRQ ONESHOT flag to ensure the timestamp is not updated in the hard handler during the thread handler. And use a fixed value of 1 sample that correspond to this first timestamp. This way we can ensure the timestamp is always corresponding to the value used by the timestamping mechanism. Otherwise, it is possible that between FIFO count read and FIFO processing the timestamp is overwritten in the hard handler. Fixes: 111e1abd0045 ("iio: imu: inv_mpu6050: use the common inv_sensors timestamp module") Cc: stable@vger.kernel.org Signed-off-by: Jean-Baptiste Maneyrol Link: https://lore.kernel.org/r/20240527150117.608792-1-inv.git-commit@tdk.com Signed-off-by: Jonathan Cameron --- drivers/iio/imu/inv_mpu6050/inv_mpu_ring.c | 4 ++-- drivers/iio/imu/inv_mpu6050/inv_mpu_trigger.c | 1 + 2 files changed, 3 insertions(+), 2 deletions(-) diff --git a/drivers/iio/imu/inv_mpu6050/inv_mpu_ring.c b/drivers/iio/imu/inv_mpu6050/inv_mpu_ring.c index 0dc0f22a5582..3d3b27f28c9d 100644 --- a/drivers/iio/imu/inv_mpu6050/inv_mpu_ring.c +++ b/drivers/iio/imu/inv_mpu6050/inv_mpu_ring.c @@ -100,8 +100,8 @@ irqreturn_t inv_mpu6050_read_fifo(int irq, void *p) goto end_session; /* Each FIFO data contains all sensors, so same number for FIFO and sensor data */ fifo_period = NSEC_PER_SEC / INV_MPU6050_DIVIDER_TO_FIFO_RATE(st->chip_config.divider); - inv_sensors_timestamp_interrupt(&st->timestamp, nb, pf->timestamp); - inv_sensors_timestamp_apply_odr(&st->timestamp, fifo_period, nb, 0); + inv_sensors_timestamp_interrupt(&st->timestamp, 1, pf->timestamp); + inv_sensors_timestamp_apply_odr(&st->timestamp, fifo_period, 1, 0); /* clear internal data buffer for avoiding kernel data leak */ memset(data, 0, sizeof(data)); diff --git a/drivers/iio/imu/inv_mpu6050/inv_mpu_trigger.c b/drivers/iio/imu/inv_mpu6050/inv_mpu_trigger.c index 1b603567ccc8..84273660ca2e 100644 --- a/drivers/iio/imu/inv_mpu6050/inv_mpu_trigger.c +++ b/drivers/iio/imu/inv_mpu6050/inv_mpu_trigger.c @@ -300,6 +300,7 @@ int inv_mpu6050_probe_trigger(struct iio_dev *indio_dev, int irq_type) if (!st->trig) return -ENOMEM; + irq_type |= IRQF_ONESHOT; ret = devm_request_threaded_irq(&indio_dev->dev, st->irq, &inv_mpu6050_interrupt_timestamp, &inv_mpu6050_interrupt_handle, From 78f0dfa64cbd05f381849377a32e0a2f1afe9215 Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Thu, 30 May 2024 09:44:16 +0200 Subject: [PATCH 16/25] iio: inkern: fix channel read regression A recent "cleanup" broke IIO channel read outs and thereby thermal mitigation on the Lenovo ThinkPad X13s by returning zero instead of the expected IIO value type in iio_read_channel_processed_scale(): thermal thermal_zone12: failed to read out thermal zone (-22) Fixes: 3092bde731ca ("iio: inkern: move to the cleanup.h magic") Cc: Nuno Sa Signed-off-by: Johan Hovold Link: https://lore.kernel.org/r/20240530074416.13697-1-johan+linaro@kernel.org Signed-off-by: Jonathan Cameron --- drivers/iio/inkern.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/iio/inkern.c b/drivers/iio/inkern.c index 52d773261828..485e6fc44a04 100644 --- a/drivers/iio/inkern.c +++ b/drivers/iio/inkern.c @@ -721,7 +721,7 @@ int iio_read_channel_processed_scale(struct iio_channel *chan, int *val, return ret; *val *= scale; - return 0; + return ret; } else { ret = iio_channel_read(chan, val, NULL, IIO_CHAN_INFO_RAW); if (ret < 0) From 1db5322b7e6b58e1b304ce69a50e9dca798ca95b Mon Sep 17 00:00:00 2001 From: Alexander Usyskin Date: Thu, 30 May 2024 12:14:15 +0300 Subject: [PATCH 17/25] mei: demote client disconnect warning on suspend to debug Change level for the "not connected" client message in the write callback from error to debug. The MEI driver currently disconnects all clients upon system suspend. This behavior is by design and user-space applications with open connections before the suspend are expected to handle errors upon resume, by reopening their handles, reconnecting, and retrying their operations. However, the current driver implementation logs an error message every time a write operation is attempted on a disconnected client. Since this is a normal and expected flow after system resume logging this as an error can be misleading. Signed-off-by: Alexander Usyskin Signed-off-by: Tomas Winkler Link: https://lore.kernel.org/r/20240530091415.725247-1-tomas.winkler@intel.com Signed-off-by: Greg Kroah-Hartman --- drivers/misc/mei/main.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/misc/mei/main.c b/drivers/misc/mei/main.c index 79e6f3c1341f..40c3fe26f76d 100644 --- a/drivers/misc/mei/main.c +++ b/drivers/misc/mei/main.c @@ -329,7 +329,7 @@ static ssize_t mei_write(struct file *file, const char __user *ubuf, } if (!mei_cl_is_connected(cl)) { - cl_err(dev, cl, "is not connected"); + cl_dbg(dev, cl, "is not connected"); rets = -ENODEV; goto out; } From 283cb234ef95d94c61f59e1cd070cd9499b51292 Mon Sep 17 00:00:00 2001 From: Tomas Winkler Date: Tue, 4 Jun 2024 12:07:28 +0300 Subject: [PATCH 18/25] mei: me: release irq in mei_me_pci_resume error path The mei_me_pci_resume doesn't release irq on the error path, in case mei_start() fails. Cc: Fixes: 33ec08263147 ("mei: revamp mei reset state machine") Signed-off-by: Tomas Winkler Link: https://lore.kernel.org/r/20240604090728.1027307-1-tomas.winkler@intel.com Signed-off-by: Greg Kroah-Hartman --- drivers/misc/mei/pci-me.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/misc/mei/pci-me.c b/drivers/misc/mei/pci-me.c index 7f59dd38c32f..6589635f8ba3 100644 --- a/drivers/misc/mei/pci-me.c +++ b/drivers/misc/mei/pci-me.c @@ -385,8 +385,10 @@ static int mei_me_pci_resume(struct device *device) } err = mei_restart(dev); - if (err) + if (err) { + free_irq(pdev->irq, dev); return err; + } /* Start timer if stopped in suspend */ schedule_delayed_work(&dev->timer_work, HZ); From 9b5e045029d8bded4c6979874ed3abc347c1415c Mon Sep 17 00:00:00 2001 From: Wentong Wu Date: Mon, 27 May 2024 20:38:35 +0800 Subject: [PATCH 19/25] mei: vsc: Don't stop/restart mei device during system suspend/resume The dynamically created mei client device (mei csi) is used as one V4L2 sub device of the whole video pipeline, and the V4L2 connection graph is built by software node. The mei_stop() and mei_restart() will delete the old mei csi client device and create a new mei client device, which will cause the software node information saved in old mei csi device lost and the whole video pipeline will be broken. Removing mei_stop()/mei_restart() during system suspend/resume can fix the issue above and won't impact hardware actual power saving logic. Fixes: f6085a96c973 ("mei: vsc: Unregister interrupt handler for system suspend") Cc: stable@vger.kernel.org # for 6.8+ Reported-by: Hao Yao Signed-off-by: Wentong Wu Reviewed-by: Sakari Ailus Tested-by: Jason Chen Tested-by: Sakari Ailus Acked-by: Tomas Winkler Link: https://lore.kernel.org/r/20240527123835.522384-1-wentong.wu@intel.com Signed-off-by: Greg Kroah-Hartman --- drivers/misc/mei/platform-vsc.c | 39 +++++++++++++-------------------- 1 file changed, 15 insertions(+), 24 deletions(-) diff --git a/drivers/misc/mei/platform-vsc.c b/drivers/misc/mei/platform-vsc.c index b543e6b9f3cf..1ec65d87488a 100644 --- a/drivers/misc/mei/platform-vsc.c +++ b/drivers/misc/mei/platform-vsc.c @@ -399,41 +399,32 @@ static void mei_vsc_remove(struct platform_device *pdev) static int mei_vsc_suspend(struct device *dev) { - struct mei_device *mei_dev = dev_get_drvdata(dev); - struct mei_vsc_hw *hw = mei_dev_to_vsc_hw(mei_dev); + struct mei_device *mei_dev; + int ret = 0; - mei_stop(mei_dev); + mei_dev = dev_get_drvdata(dev); + if (!mei_dev) + return -ENODEV; - mei_disable_interrupts(mei_dev); + mutex_lock(&mei_dev->device_lock); - vsc_tp_free_irq(hw->tp); + if (!mei_write_is_idle(mei_dev)) + ret = -EAGAIN; - return 0; + mutex_unlock(&mei_dev->device_lock); + + return ret; } static int mei_vsc_resume(struct device *dev) { - struct mei_device *mei_dev = dev_get_drvdata(dev); - struct mei_vsc_hw *hw = mei_dev_to_vsc_hw(mei_dev); - int ret; + struct mei_device *mei_dev; - ret = vsc_tp_request_irq(hw->tp); - if (ret) - return ret; - - ret = mei_restart(mei_dev); - if (ret) - goto err_free; - - /* start timer if stopped in suspend */ - schedule_delayed_work(&mei_dev->timer_work, HZ); + mei_dev = dev_get_drvdata(dev); + if (!mei_dev) + return -ENODEV; return 0; - -err_free: - vsc_tp_free_irq(hw->tp); - - return ret; } static DEFINE_SIMPLE_DEV_PM_OPS(mei_vsc_pm_ops, mei_vsc_suspend, mei_vsc_resume); From af076156ec6d70332f1555754e99d4a3771ec297 Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Mon, 3 Jun 2024 22:50:50 +0200 Subject: [PATCH 20/25] mei: vsc: Fix wrong invocation of ACPI SID method When using an initializer for a union only one of the union members must be initialized. The initializer for the acpi_object union variable passed as argument to the SID ACPI method was initializing both the type and the integer members of the union. Unfortunately rather then complaining about this gcc simply ignores the first initializer and only used the second integer.value = 1 initializer. Leaving type set to 0 which leads to the argument being skipped by acpi acpi_ns_evaluate() resulting in: ACPI Warning: \_SB.PC00.SPI1.SPFD.CVFD.SID: Insufficient arguments - Caller passed 0, method requires 1 (20240322/nsarguments-232) Fix this by initializing only the integer struct part of the union and initializing both members of the integer struct. Signed-off-by: Hans de Goede Reviewed-by: Sakari Ailus Fixes: 566f5ca97680 ("mei: Add transport driver for IVSC device") Reviewed-by: Wentong Wu Link: https://lore.kernel.org/r/20240603205050.505389-1-hdegoede@redhat.com Signed-off-by: Greg Kroah-Hartman --- drivers/misc/mei/vsc-fw-loader.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/misc/mei/vsc-fw-loader.c b/drivers/misc/mei/vsc-fw-loader.c index ffa4ccd96a10..596a9d695dfc 100644 --- a/drivers/misc/mei/vsc-fw-loader.c +++ b/drivers/misc/mei/vsc-fw-loader.c @@ -252,7 +252,7 @@ static int vsc_get_sensor_name(struct vsc_fw_loader *fw_loader, { struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER }; union acpi_object obj = { - .type = ACPI_TYPE_INTEGER, + .integer.type = ACPI_TYPE_INTEGER, .integer.value = 1, }; struct acpi_object_list arg_list = { From 73fedc31fed38cb6039fd8a7efea1774143b68b0 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Uwe=20Kleine-K=C3=B6nig?= Date: Mon, 13 May 2024 09:52:06 +0200 Subject: [PATCH 21/25] parport: amiga: Mark driver struct with __refdata to prevent section mismatch MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit As described in the added code comment, a reference to .exit.text is ok for drivers registered via module_platform_driver_probe(). Make this explicit to prevent the following section mismatch warning WARNING: modpost: drivers/parport/parport_amiga: section mismatch in reference: amiga_parallel_driver+0x8 (section: .data) -> amiga_parallel_remove (section: .exit.text) that triggers on an allmodconfig W=1 build. Signed-off-by: Uwe Kleine-König Link: https://lore.kernel.org/r/20240513075206.2337310-2-u.kleine-koenig@pengutronix.de Signed-off-by: Greg Kroah-Hartman --- drivers/parport/parport_amiga.c | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-) diff --git a/drivers/parport/parport_amiga.c b/drivers/parport/parport_amiga.c index e6dc857aac3f..e06c7b2aac5c 100644 --- a/drivers/parport/parport_amiga.c +++ b/drivers/parport/parport_amiga.c @@ -229,7 +229,13 @@ static void __exit amiga_parallel_remove(struct platform_device *pdev) parport_put_port(port); } -static struct platform_driver amiga_parallel_driver = { +/* + * amiga_parallel_remove() lives in .exit.text. For drivers registered via + * module_platform_driver_probe() this is ok because they cannot get unbound at + * runtime. So mark the driver struct with __refdata to prevent modpost + * triggering a section mismatch warning. + */ +static struct platform_driver amiga_parallel_driver __refdata = { .remove_new = __exit_p(amiga_parallel_remove), .driver = { .name = "amiga-parallel", From 086c6cbcc563c81d55257f9b27e14faf1d0963d3 Mon Sep 17 00:00:00 2001 From: Yongzhi Liu Date: Thu, 23 May 2024 20:14:33 +0800 Subject: [PATCH 22/25] misc: microchip: pci1xxxx: fix double free in the error handling of gp_aux_bus_probe() When auxiliary_device_add() returns error and then calls auxiliary_device_uninit(), callback function gp_auxiliary_device_release() calls ida_free() and kfree(aux_device_wrapper) to free memory. We should't call them again in the error handling path. Fix this by skipping the redundant cleanup functions. Fixes: 393fc2f5948f ("misc: microchip: pci1xxxx: load auxiliary bus driver for the PIO function in the multi-function endpoint of pci1xxxx device.") Signed-off-by: Yongzhi Liu Link: https://lore.kernel.org/r/20240523121434.21855-3-hyperlyzcs@gmail.com Signed-off-by: Greg Kroah-Hartman --- drivers/misc/mchp_pci1xxxx/mchp_pci1xxxx_gp.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/misc/mchp_pci1xxxx/mchp_pci1xxxx_gp.c b/drivers/misc/mchp_pci1xxxx/mchp_pci1xxxx_gp.c index 32af2b14ff34..de75d89ef53e 100644 --- a/drivers/misc/mchp_pci1xxxx/mchp_pci1xxxx_gp.c +++ b/drivers/misc/mchp_pci1xxxx/mchp_pci1xxxx_gp.c @@ -111,6 +111,7 @@ static int gp_aux_bus_probe(struct pci_dev *pdev, const struct pci_device_id *id err_aux_dev_add_1: auxiliary_device_uninit(&aux_bus->aux_device_wrapper[1]->aux_dev); + goto err_aux_dev_add_0; err_aux_dev_init_1: ida_free(&gp_client_ida, aux_bus->aux_device_wrapper[1]->aux_dev.id); @@ -120,6 +121,7 @@ err_ida_alloc_1: err_aux_dev_add_0: auxiliary_device_uninit(&aux_bus->aux_device_wrapper[0]->aux_dev); + goto err_ret; err_aux_dev_init_0: ida_free(&gp_client_ida, aux_bus->aux_device_wrapper[0]->aux_dev.id); @@ -127,6 +129,7 @@ err_aux_dev_init_0: err_ida_alloc_0: kfree(aux_bus->aux_device_wrapper[0]); +err_ret: return retval; } From 77427e3d5c353e3dd98c7c0af322f8d9e3131ace Mon Sep 17 00:00:00 2001 From: Yongzhi Liu Date: Thu, 23 May 2024 20:14:34 +0800 Subject: [PATCH 23/25] misc: microchip: pci1xxxx: Fix a memory leak in the error handling of gp_aux_bus_probe() There is a memory leak (forget to free allocated buffers) in a memory allocation failure path. Fix it to jump to the correct error handling code. Fixes: 393fc2f5948f ("misc: microchip: pci1xxxx: load auxiliary bus driver for the PIO function in the multi-function endpoint of pci1xxxx device.") Signed-off-by: Yongzhi Liu Reviewed-by: Kumaravel Thiagarajan Link: https://lore.kernel.org/r/20240523121434.21855-4-hyperlyzcs@gmail.com Signed-off-by: Greg Kroah-Hartman --- drivers/misc/mchp_pci1xxxx/mchp_pci1xxxx_gp.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/drivers/misc/mchp_pci1xxxx/mchp_pci1xxxx_gp.c b/drivers/misc/mchp_pci1xxxx/mchp_pci1xxxx_gp.c index de75d89ef53e..34c9be437432 100644 --- a/drivers/misc/mchp_pci1xxxx/mchp_pci1xxxx_gp.c +++ b/drivers/misc/mchp_pci1xxxx/mchp_pci1xxxx_gp.c @@ -69,8 +69,10 @@ static int gp_aux_bus_probe(struct pci_dev *pdev, const struct pci_device_id *id aux_bus->aux_device_wrapper[1] = kzalloc(sizeof(*aux_bus->aux_device_wrapper[1]), GFP_KERNEL); - if (!aux_bus->aux_device_wrapper[1]) - return -ENOMEM; + if (!aux_bus->aux_device_wrapper[1]) { + retval = -ENOMEM; + goto err_aux_dev_add_0; + } retval = ida_alloc(&gp_client_ida, GFP_KERNEL); if (retval < 0) From 7c55b78818cfb732680c4a72ab270cc2d2ee3d0f Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Tue, 14 May 2024 12:06:34 +0200 Subject: [PATCH 24/25] jfs: xattr: fix buffer overflow for invalid xattr When an xattr size is not what is expected, it is printed out to the kernel log in hex format as a form of debugging. But when that xattr size is bigger than the expected size, printing it out can cause an access off the end of the buffer. Fix this all up by properly restricting the size of the debug hex dump in the kernel log. Reported-by: syzbot+9dfe490c8176301c1d06@syzkaller.appspotmail.com Cc: Dave Kleikamp Link: https://lore.kernel.org/r/2024051433-slider-cloning-98f9@gregkh Signed-off-by: Greg Kroah-Hartman --- fs/jfs/xattr.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/fs/jfs/xattr.c b/fs/jfs/xattr.c index 0fb7afac298e..9987055293b3 100644 --- a/fs/jfs/xattr.c +++ b/fs/jfs/xattr.c @@ -557,9 +557,11 @@ static int ea_get(struct inode *inode, struct ea_buffer *ea_buf, int min_size) size_check: if (EALIST_SIZE(ea_buf->xattr) != ea_size) { + int size = min_t(int, EALIST_SIZE(ea_buf->xattr), ea_size); + printk(KERN_ERR "ea_get: invalid extended attribute\n"); print_hex_dump(KERN_ERR, "", DUMP_PREFIX_ADDRESS, 16, 1, - ea_buf->xattr, ea_size, 1); + ea_buf->xattr, size, 1); ea_release(inode, ea_buf); rc = -EIO; goto clean_up; From 7da9dfdd5a3dbfd3d2450d9c6a3d1d699d625c43 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Tue, 11 Jun 2024 09:27:38 +0200 Subject: [PATCH 25/25] .editorconfig: remove trim_trailing_whitespace option MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Some editors (like the vim variants), when seeing "trim_whitespace" decide to do just that for all of the whitespace in the file you are saving, even if it is not on a line that you have modified. This plays havoc with diffs and is NOT something that should be intended. As the "only trim whitespace on modified lines" is not part of the editorconfig standard yet, just delete these lines from the .editorconfig file so that we don't end up with diffs that are automatically rejected by maintainers for containing things they shouldn't. Cc: Danny Lin Cc: Íñigo Huguet Cc: Mickaël Salaün Cc: Masahiro Yamada Fixes: 5a602de99797 ("Add .editorconfig file for basic formatting") Acked-by: Vincent Mailhol Link: https://lore.kernel.org/r/2024061137-jawless-dipped-e789@gregkh Signed-off-by: Greg Kroah-Hartman --- .editorconfig | 3 --- 1 file changed, 3 deletions(-) diff --git a/.editorconfig b/.editorconfig index 854773350cc5..29a30ccfc07b 100644 --- a/.editorconfig +++ b/.editorconfig @@ -5,7 +5,6 @@ root = true [{*.{awk,c,dts,dtsi,dtso,h,mk,s,S},Kconfig,Makefile,Makefile.*}] charset = utf-8 end_of_line = lf -trim_trailing_whitespace = true insert_final_newline = true indent_style = tab indent_size = 8 @@ -13,7 +12,6 @@ indent_size = 8 [*.{json,py,rs}] charset = utf-8 end_of_line = lf -trim_trailing_whitespace = true insert_final_newline = true indent_style = space indent_size = 4 @@ -26,7 +24,6 @@ indent_size = 8 [*.yaml] charset = utf-8 end_of_line = lf -trim_trailing_whitespace = unset insert_final_newline = true indent_style = space indent_size = 2