From 9e2f46cd87473c70d01fcaf8a559809e6d18dd50 Mon Sep 17 00:00:00 2001 From: Jason Nader Date: Tue, 21 May 2024 22:36:24 +0900 Subject: [PATCH 1/4] ata: ahci: Do not apply Intel PCS quirk on Intel Alder Lake Commit b8b8b4e0c052 ("ata: ahci: Add Intel Alder Lake-P AHCI controller to low power chipsets list") added Intel Alder Lake to the ahci_pci_tbl. Because of the way that the Intel PCS quirk was implemented, having an explicit entry in the ahci_pci_tbl caused the Intel PCS quirk to be applied. (The quirk was not being applied if there was no explict entry.) Thus, entries that were added to the ahci_pci_tbl also got the Intel PCS quirk applied. The quirk was cleaned up in commit 7edbb6059274 ("ahci: clean up intel_pcs_quirk"), such that it is clear which entries that actually applies the Intel PCS quirk. Newer Intel AHCI controllers do not need the Intel PCS quirk, and applying it when not needed actually breaks some platforms. Do not apply the Intel PCS quirk for Intel Alder Lake. This is in line with how things worked before commit b8b8b4e0c052 ("ata: ahci: Add Intel Alder Lake-P AHCI controller to low power chipsets list"), such that certain platforms using Intel Alder Lake will work once again. Cc: stable@vger.kernel.org # 6.7 Fixes: b8b8b4e0c052 ("ata: ahci: Add Intel Alder Lake-P AHCI controller to low power chipsets list") Signed-off-by: Jason Nader Signed-off-by: Niklas Cassel --- drivers/ata/ahci.c | 1 - 1 file changed, 1 deletion(-) diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c index 6548f10e61d9..07d66d2c5f0d 100644 --- a/drivers/ata/ahci.c +++ b/drivers/ata/ahci.c @@ -429,7 +429,6 @@ static const struct pci_device_id ahci_pci_tbl[] = { { PCI_VDEVICE(INTEL, 0x02d7), board_ahci_pcs_quirk }, /* Comet Lake PCH RAID */ /* Elkhart Lake IDs 0x4b60 & 0x4b62 https://sata-io.org/product/8803 not tested yet */ { PCI_VDEVICE(INTEL, 0x4b63), board_ahci_pcs_quirk }, /* Elkhart Lake AHCI */ - { PCI_VDEVICE(INTEL, 0x7ae2), board_ahci_pcs_quirk }, /* Alder Lake-P AHCI */ /* JMicron 360/1/3/5/6, match class to avoid IDE function */ { PCI_VENDOR_ID_JMICRON, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, From 86aaa7e9d641c1ad1035ed2df88b8d0b48c86b30 Mon Sep 17 00:00:00 2001 From: Niklas Cassel Date: Thu, 30 May 2024 23:28:17 +0200 Subject: [PATCH 2/4] ata: libata-core: Add ATA_HORKAGE_NOLPM for Crucial CT240BX500SSD1 Commit 7627a0edef54 ("ata: ahci: Drop low power policy board type") dropped the board_ahci_low_power board type, and instead enables LPM if: -The AHCI controller reports that it supports LPM (Partial/Slumber), and -CONFIG_SATA_MOBILE_LPM_POLICY != 0, and -The port is not defined as external in the per port PxCMD register, and -The port is not defined as hotplug capable in the per port PxCMD register. Partial and Slumber LPM states can either be initiated by HIPM or DIPM. For HIPM (host initiated power management) to get enabled, both the AHCI controller and the drive have to report that they support HIPM. For DIPM (device initiated power management) to get enabled, only the drive has to report that it supports DIPM. However, the HBA will reject device requests to enter LPM states which the HBA does not support. The problem is that Crucial CT240BX500SSD1 drives do not handle low power modes correctly. The problem was most likely not seen before because no one had used this drive with a AHCI controller with LPM enabled. Add a quirk so that we do not enable LPM for this drive, since we see command timeouts if we do (even though the drive claims to support DIPM). Fixes: 7627a0edef54 ("ata: ahci: Drop low power policy board type") Cc: stable@vger.kernel.org Reported-by: Aarrayy Closes: https://bugzilla.kernel.org/show_bug.cgi?id=218832 Reviewed-by: Mika Westerberg Reviewed-by: Damien Le Moal Signed-off-by: Niklas Cassel --- drivers/ata/libata-core.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c index 4f35aab81a0a..b0ce621fe2a1 100644 --- a/drivers/ata/libata-core.c +++ b/drivers/ata/libata-core.c @@ -4136,8 +4136,9 @@ static const struct ata_blacklist_entry ata_device_blacklist [] = { { "PIONEER BD-RW BDR-207M", NULL, ATA_HORKAGE_NOLPM }, { "PIONEER BD-RW BDR-205", NULL, ATA_HORKAGE_NOLPM }, - /* Crucial BX100 SSD 500GB has broken LPM support */ + /* Crucial devices with broken LPM support */ { "CT500BX100SSD1", NULL, ATA_HORKAGE_NOLPM }, + { "CT240BX500SSD1", NULL, ATA_HORKAGE_NOLPM }, /* 512GB MX100 with MU01 firmware has both queued TRIM and LPM issues */ { "Crucial_CT512MX100*", "MU01", ATA_HORKAGE_NO_NCQ_TRIM | From 473880369304cfd4445720cdd8bae4c6f1e16e60 Mon Sep 17 00:00:00 2001 From: Niklas Cassel Date: Thu, 30 May 2024 23:32:44 +0200 Subject: [PATCH 3/4] ata: libata-core: Add ATA_HORKAGE_NOLPM for AMD Radeon S3 SSD Commit 7627a0edef54 ("ata: ahci: Drop low power policy board type") dropped the board_ahci_low_power board type, and instead enables LPM if: -The AHCI controller reports that it supports LPM (Partial/Slumber), and -CONFIG_SATA_MOBILE_LPM_POLICY != 0, and -The port is not defined as external in the per port PxCMD register, and -The port is not defined as hotplug capable in the per port PxCMD register. Partial and Slumber LPM states can either be initiated by HIPM or DIPM. For HIPM (host initiated power management) to get enabled, both the AHCI controller and the drive have to report that they support HIPM. For DIPM (device initiated power management) to get enabled, only the drive has to report that it supports DIPM. However, the HBA will reject device requests to enter LPM states which the HBA does not support. The problem is that AMD Radeon S3 SSD drives do not handle low power modes correctly. The problem was most likely not seen before because no one had used this drive with a AHCI controller with LPM enabled. Add a quirk so that we do not enable LPM for this drive, since we see command timeouts if we do (even though the drive claims to support both HIPM and DIPM). Fixes: 7627a0edef54 ("ata: ahci: Drop low power policy board type") Cc: stable@vger.kernel.org Reported-by: Doru Iorgulescu Closes: https://bugzilla.kernel.org/show_bug.cgi?id=218832 Reviewed-by: Mika Westerberg Reviewed-by: Damien Le Moal Signed-off-by: Niklas Cassel --- drivers/ata/libata-core.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c index b0ce621fe2a1..4ea859dc381a 100644 --- a/drivers/ata/libata-core.c +++ b/drivers/ata/libata-core.c @@ -4156,6 +4156,9 @@ static const struct ata_blacklist_entry ata_device_blacklist [] = { ATA_HORKAGE_ZERO_AFTER_TRIM | ATA_HORKAGE_NOLPM }, + /* AMD Radeon devices with broken LPM support */ + { "R3SL240G", NULL, ATA_HORKAGE_NOLPM }, + /* These specific Samsung models/firmware-revs do not handle LPM well */ { "SAMSUNG MZMPC128HBFU-000MV", "CXM14M1Q", ATA_HORKAGE_NOLPM }, { "SAMSUNG SSD PM830 mSATA *", "CXM13D1Q", ATA_HORKAGE_NOLPM }, From 3cb648c4dd3e8dde800fb3659250ed11f2d9efa5 Mon Sep 17 00:00:00 2001 From: Niklas Cassel Date: Thu, 30 May 2024 23:27:04 +0200 Subject: [PATCH 4/4] ata: libata-core: Add ATA_HORKAGE_NOLPM for Apacer AS340 Commit 7627a0edef54 ("ata: ahci: Drop low power policy board type") dropped the board_ahci_low_power board type, and instead enables LPM if: -The AHCI controller reports that it supports LPM (Partial/Slumber), and -CONFIG_SATA_MOBILE_LPM_POLICY != 0, and -The port is not defined as external in the per port PxCMD register, and -The port is not defined as hotplug capable in the per port PxCMD register. Partial and Slumber LPM states can either be initiated by HIPM or DIPM. For HIPM (host initiated power management) to get enabled, both the AHCI controller and the drive have to report that they support HIPM. For DIPM (device initiated power management) to get enabled, only the drive has to report that it supports DIPM. However, the HBA will reject device requests to enter LPM states which the HBA does not support. The problem is that Apacer AS340 drives do not handle low power modes correctly. The problem was most likely not seen before because no one had used this drive with a AHCI controller with LPM enabled. Add a quirk so that we do not enable LPM for this drive, since we see command timeouts if we do (even though the drive claims to support DIPM). Fixes: 7627a0edef54 ("ata: ahci: Drop low power policy board type") Cc: stable@vger.kernel.org Reported-by: Tim Teichmann Closes: https://lore.kernel.org/linux-ide/87bk4pbve8.ffs@tglx/ Reviewed-by: Mika Westerberg Reviewed-by: Damien Le Moal Signed-off-by: Niklas Cassel --- drivers/ata/libata-core.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c index 4ea859dc381a..e1bf8a19b3c8 100644 --- a/drivers/ata/libata-core.c +++ b/drivers/ata/libata-core.c @@ -4159,6 +4159,9 @@ static const struct ata_blacklist_entry ata_device_blacklist [] = { /* AMD Radeon devices with broken LPM support */ { "R3SL240G", NULL, ATA_HORKAGE_NOLPM }, + /* Apacer models with LPM issues */ + { "Apacer AS340*", NULL, ATA_HORKAGE_NOLPM }, + /* These specific Samsung models/firmware-revs do not handle LPM well */ { "SAMSUNG MZMPC128HBFU-000MV", "CXM14M1Q", ATA_HORKAGE_NOLPM }, { "SAMSUNG SSD PM830 mSATA *", "CXM13D1Q", ATA_HORKAGE_NOLPM },