arm64: kernel: Create initial ID map from C code

The asm code that creates the initial ID map is rather intricate and
hard to follow. This is problematic because it makes adding support for
things like LPA2 or WXN more difficult than necessary. Also, it is
parameterized like the rest of the MM code to run with a configurable
number of levels, which is rather pointless, given that all AArch64 CPUs
implement support for 48-bit virtual addressing, and that many systems
exist with DRAM located outside of the 39-bit addressable range, which
is the only smaller VA size that is widely used, and we need additional
tricks to make things work in that combination.

So let's bite the bullet, and rip out all the asm macros, and fiddly
code, and replace it with a C implementation based on the newly added
routines for creating the early kernel VA mappings. And while at it,
create the initial ID map based on 48-bit virtual addressing as well,
regardless of the number of configured levels for the kernel proper.

Note that this code may execute with the MMU and caches disabled, and is
therefore not permitted to make unaligned accesses. This shouldn't
generally happen in any case for the algorithm as implemented, but to be
sure, let's pass -mstrict-align to the compiler just in case.

Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20240214122845.2033971-66-ardb+git@google.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
This commit is contained in:
Ard Biesheuvel 2024-02-14 13:29:07 +01:00 committed by Catalin Marinas
parent 34b98e55f6
commit 84b04d3e6b
11 changed files with 88 additions and 295 deletions

View File

@ -345,20 +345,6 @@ alternative_cb_end
bfi \valreg, \t1sz, #TCR_T1SZ_OFFSET, #TCR_TxSZ_WIDTH
.endm
/*
* idmap_get_t0sz - get the T0SZ value needed to cover the ID map
*
* Calculate the maximum allowed value for TCR_EL1.T0SZ so that the
* entire ID map region can be mapped. As T0SZ == (64 - #bits used),
* this number conveniently equals the number of leading zeroes in
* the physical address of _end.
*/
.macro idmap_get_t0sz, reg
adrp \reg, _end
orr \reg, \reg, #(1 << VA_BITS_MIN) - 1
clz \reg, \reg
.endm
/*
* tcr_compute_pa_size - set TCR.(I)PS to the highest supported
* ID_AA64MMFR0_EL1.PARange value

View File

@ -29,6 +29,7 @@
#define SWAPPER_TABLE_SHIFT (SWAPPER_BLOCK_SHIFT + PAGE_SHIFT - 3)
#define SWAPPER_PGTABLE_LEVELS (CONFIG_PGTABLE_LEVELS - SWAPPER_SKIP_LEVEL)
#define INIT_IDMAP_PGTABLE_LEVELS (IDMAP_LEVELS - SWAPPER_SKIP_LEVEL)
#define IDMAP_VA_BITS 48
#define IDMAP_LEVELS ARM64_HW_PGTABLE_LEVELS(IDMAP_VA_BITS)
@ -48,44 +49,39 @@
#define EARLY_ENTRIES(vstart, vend, shift, add) \
(SPAN_NR_ENTRIES(vstart, vend, shift) + (add))
#define EARLY_LEVEL(lvl, vstart, vend, add) \
(SWAPPER_PGTABLE_LEVELS > lvl ? EARLY_ENTRIES(vstart, vend, SWAPPER_BLOCK_SHIFT + lvl * (PAGE_SHIFT - 3), add) : 0)
#define EARLY_LEVEL(lvl, lvls, vstart, vend, add) \
(lvls > lvl ? EARLY_ENTRIES(vstart, vend, SWAPPER_BLOCK_SHIFT + lvl * (PAGE_SHIFT - 3), add) : 0)
#define EARLY_PAGES(vstart, vend, add) (1 /* PGDIR page */ \
+ EARLY_LEVEL(3, (vstart), (vend), add) /* each entry needs a next level page table */ \
+ EARLY_LEVEL(2, (vstart), (vend), add) /* each entry needs a next level page table */ \
+ EARLY_LEVEL(1, (vstart), (vend), add))/* each entry needs a next level page table */
#define INIT_DIR_SIZE (PAGE_SIZE * (EARLY_PAGES(KIMAGE_VADDR, _end, EXTRA_PAGE) + EARLY_SEGMENT_EXTRA_PAGES))
#define EARLY_PAGES(lvls, vstart, vend, add) (1 /* PGDIR page */ \
+ EARLY_LEVEL(3, (lvls), (vstart), (vend), add) /* each entry needs a next level page table */ \
+ EARLY_LEVEL(2, (lvls), (vstart), (vend), add) /* each entry needs a next level page table */ \
+ EARLY_LEVEL(1, (lvls), (vstart), (vend), add))/* each entry needs a next level page table */
#define INIT_DIR_SIZE (PAGE_SIZE * (EARLY_PAGES(SWAPPER_PGTABLE_LEVELS, KIMAGE_VADDR, _end, EXTRA_PAGE) \
+ EARLY_SEGMENT_EXTRA_PAGES))
/* the initial ID map may need two extra pages if it needs to be extended */
#if VA_BITS < 48
#define INIT_IDMAP_DIR_SIZE ((INIT_IDMAP_DIR_PAGES + 2) * PAGE_SIZE)
#else
#define INIT_IDMAP_DIR_SIZE (INIT_IDMAP_DIR_PAGES * PAGE_SIZE)
#endif
#define INIT_IDMAP_DIR_PAGES EARLY_PAGES(KIMAGE_VADDR, _end + MAX_FDT_SIZE + SWAPPER_BLOCK_SIZE, 1)
#define INIT_IDMAP_DIR_PAGES (EARLY_PAGES(INIT_IDMAP_PGTABLE_LEVELS, KIMAGE_VADDR, _end, 1))
#define INIT_IDMAP_DIR_SIZE ((INIT_IDMAP_DIR_PAGES + EARLY_IDMAP_EXTRA_PAGES) * PAGE_SIZE)
#define INIT_IDMAP_FDT_PAGES (EARLY_PAGES(INIT_IDMAP_PGTABLE_LEVELS, 0UL, UL(MAX_FDT_SIZE), 1) - 1)
#define INIT_IDMAP_FDT_SIZE ((INIT_IDMAP_FDT_PAGES + EARLY_IDMAP_EXTRA_FDT_PAGES) * PAGE_SIZE)
/* The number of segments in the kernel image (text, rodata, inittext, initdata, data+bss) */
#define KERNEL_SEGMENT_COUNT 5
#if SWAPPER_BLOCK_SIZE > SEGMENT_ALIGN
#define EARLY_SEGMENT_EXTRA_PAGES (KERNEL_SEGMENT_COUNT + 1)
#else
#define EARLY_SEGMENT_EXTRA_PAGES 0
#endif
/*
* Initial memory map attributes.
* The initial ID map consists of the kernel image, mapped as two separate
* segments, and may appear misaligned wrt the swapper block size. This means
* we need 3 additional pages. The DT could straddle a swapper block boundary,
* so it may need 2.
*/
#define SWAPPER_PTE_FLAGS (PTE_TYPE_PAGE | PTE_AF | PTE_SHARED | PTE_UXN)
#define SWAPPER_PMD_FLAGS (PMD_TYPE_SECT | PMD_SECT_AF | PMD_SECT_S | PTE_UXN)
#ifdef CONFIG_ARM64_4K_PAGES
#define SWAPPER_RW_MMUFLAGS (PMD_ATTRINDX(MT_NORMAL) | SWAPPER_PMD_FLAGS | PTE_WRITE)
#define SWAPPER_RX_MMUFLAGS (SWAPPER_RW_MMUFLAGS | PMD_SECT_RDONLY)
#define EARLY_IDMAP_EXTRA_PAGES 3
#define EARLY_IDMAP_EXTRA_FDT_PAGES 2
#else
#define SWAPPER_RW_MMUFLAGS (PTE_ATTRINDX(MT_NORMAL) | SWAPPER_PTE_FLAGS | PTE_WRITE)
#define SWAPPER_RX_MMUFLAGS (SWAPPER_RW_MMUFLAGS | PTE_RDONLY)
#define EARLY_SEGMENT_EXTRA_PAGES 0
#define EARLY_IDMAP_EXTRA_PAGES 0
#define EARLY_IDMAP_EXTRA_FDT_PAGES 0
#endif
#endif /* __ASM_KERNEL_PGTABLE_H */

View File

@ -61,11 +61,9 @@ static inline void cpu_switch_mm(pgd_t *pgd, struct mm_struct *mm)
}
/*
* TCR.T0SZ value to use when the ID map is active. Usually equals
* TCR_T0SZ(VA_BITS), unless system RAM is positioned very high in
* physical memory, in which case it will be smaller.
* TCR.T0SZ value to use when the ID map is active.
*/
extern int idmap_t0sz;
#define idmap_t0sz TCR_T0SZ(IDMAP_VA_BITS)
/*
* Ensure TCR.T0SZ is set to the provided value.

View File

@ -80,26 +80,42 @@
* x19 primary_entry() .. start_kernel() whether we entered with the MMU on
* x20 primary_entry() .. __primary_switch() CPU boot mode
* x21 primary_entry() .. start_kernel() FDT pointer passed at boot in x0
* x22 create_idmap() .. start_kernel() ID map VA of the DT blob
* x25 primary_entry() .. start_kernel() supported VA size
* x28 create_idmap() callee preserved temp register
*/
SYM_CODE_START(primary_entry)
bl record_mmu_state
bl preserve_boot_args
bl create_idmap
adrp x1, early_init_stack
mov sp, x1
mov x29, xzr
adrp x0, init_idmap_pg_dir
bl __pi_create_init_idmap
/*
* If the page tables have been populated with non-cacheable
* accesses (MMU disabled), invalidate those tables again to
* remove any speculatively loaded cache lines.
*/
cbnz x19, 0f
dmb sy
mov x1, x0 // end of used region
adrp x0, init_idmap_pg_dir
adr_l x2, dcache_inval_poc
blr x2
b 1f
/*
* If we entered with the MMU and caches on, clean the ID mapped part
* of the primary boot code to the PoC so we can safely execute it with
* the MMU off.
*/
cbz x19, 0f
adrp x0, __idmap_text_start
0: adrp x0, __idmap_text_start
adr_l x1, __idmap_text_end
adr_l x2, dcache_clean_poc
blr x2
0: mov x0, x19
1: mov x0, x19
bl init_kernel_el // w0=cpu_boot_mode
mov x20, x0
@ -175,238 +191,6 @@ SYM_CODE_START_LOCAL(preserve_boot_args)
ret
SYM_CODE_END(preserve_boot_args)
/*
* Macro to populate page table entries, these entries can be pointers to the next level
* or last level entries pointing to physical memory.
*
* tbl: page table address
* rtbl: pointer to page table or physical memory
* index: start index to write
* eindex: end index to write - [index, eindex] written to
* flags: flags for pagetable entry to or in
* inc: increment to rtbl between each entry
* tmp1: temporary variable
*
* Preserves: tbl, eindex, flags, inc
* Corrupts: index, tmp1
* Returns: rtbl
*/
.macro populate_entries, tbl, rtbl, index, eindex, flags, inc, tmp1
.Lpe\@: phys_to_pte \tmp1, \rtbl
orr \tmp1, \tmp1, \flags // tmp1 = table entry
str \tmp1, [\tbl, \index, lsl #3]
add \rtbl, \rtbl, \inc // rtbl = pa next level
add \index, \index, #1
cmp \index, \eindex
b.ls .Lpe\@
.endm
/*
* Compute indices of table entries from virtual address range. If multiple entries
* were needed in the previous page table level then the next page table level is assumed
* to be composed of multiple pages. (This effectively scales the end index).
*
* vstart: virtual address of start of range
* vend: virtual address of end of range - we map [vstart, vend]
* shift: shift used to transform virtual address into index
* order: #imm 2log(number of entries in page table)
* istart: index in table corresponding to vstart
* iend: index in table corresponding to vend
* count: On entry: how many extra entries were required in previous level, scales
* our end index.
* On exit: returns how many extra entries required for next page table level
*
* Preserves: vstart, vend
* Returns: istart, iend, count
*/
.macro compute_indices, vstart, vend, shift, order, istart, iend, count
ubfx \istart, \vstart, \shift, \order
ubfx \iend, \vend, \shift, \order
add \iend, \iend, \count, lsl \order
sub \count, \iend, \istart
.endm
/*
* Map memory for specified virtual address range. Each level of page table needed supports
* multiple entries. If a level requires n entries the next page table level is assumed to be
* formed from n pages.
*
* tbl: location of page table
* rtbl: address to be used for first level page table entry (typically tbl + PAGE_SIZE)
* vstart: virtual address of start of range
* vend: virtual address of end of range - we map [vstart, vend - 1]
* flags: flags to use to map last level entries
* phys: physical address corresponding to vstart - physical memory is contiguous
* order: #imm 2log(number of entries in PGD table)
*
* If extra_shift is set, an extra level will be populated if the end address does
* not fit in 'extra_shift' bits. This assumes vend is in the TTBR0 range.
*
* Temporaries: istart, iend, tmp, count, sv - these need to be different registers
* Preserves: vstart, flags
* Corrupts: tbl, rtbl, vend, istart, iend, tmp, count, sv
*/
.macro map_memory, tbl, rtbl, vstart, vend, flags, phys, order, istart, iend, tmp, count, sv, extra_shift
sub \vend, \vend, #1
add \rtbl, \tbl, #PAGE_SIZE
mov \count, #0
.ifnb \extra_shift
tst \vend, #~((1 << (\extra_shift)) - 1)
b.eq .L_\@
compute_indices \vstart, \vend, #\extra_shift, #(PAGE_SHIFT - 3), \istart, \iend, \count
mov \sv, \rtbl
populate_entries \tbl, \rtbl, \istart, \iend, #PMD_TYPE_TABLE, #PAGE_SIZE, \tmp
mov \tbl, \sv
.endif
.L_\@:
compute_indices \vstart, \vend, #PGDIR_SHIFT, #\order, \istart, \iend, \count
mov \sv, \rtbl
populate_entries \tbl, \rtbl, \istart, \iend, #PMD_TYPE_TABLE, #PAGE_SIZE, \tmp
mov \tbl, \sv
#if SWAPPER_PGTABLE_LEVELS > 3
compute_indices \vstart, \vend, #PUD_SHIFT, #(PAGE_SHIFT - 3), \istart, \iend, \count
mov \sv, \rtbl
populate_entries \tbl, \rtbl, \istart, \iend, #PMD_TYPE_TABLE, #PAGE_SIZE, \tmp
mov \tbl, \sv
#endif
#if SWAPPER_PGTABLE_LEVELS > 2
compute_indices \vstart, \vend, #SWAPPER_TABLE_SHIFT, #(PAGE_SHIFT - 3), \istart, \iend, \count
mov \sv, \rtbl
populate_entries \tbl, \rtbl, \istart, \iend, #PMD_TYPE_TABLE, #PAGE_SIZE, \tmp
mov \tbl, \sv
#endif
compute_indices \vstart, \vend, #SWAPPER_BLOCK_SHIFT, #(PAGE_SHIFT - 3), \istart, \iend, \count
bic \rtbl, \phys, #SWAPPER_BLOCK_SIZE - 1
populate_entries \tbl, \rtbl, \istart, \iend, \flags, #SWAPPER_BLOCK_SIZE, \tmp
.endm
/*
* Remap a subregion created with the map_memory macro with modified attributes
* or output address. The entire remapped region must have been covered in the
* invocation of map_memory.
*
* x0: last level table address (returned in first argument to map_memory)
* x1: start VA of the existing mapping
* x2: start VA of the region to update
* x3: end VA of the region to update (exclusive)
* x4: start PA associated with the region to update
* x5: attributes to set on the updated region
* x6: order of the last level mappings
*/
SYM_FUNC_START_LOCAL(remap_region)
sub x3, x3, #1 // make end inclusive
// Get the index offset for the start of the last level table
lsr x1, x1, x6
bfi x1, xzr, #0, #PAGE_SHIFT - 3
// Derive the start and end indexes into the last level table
// associated with the provided region
lsr x2, x2, x6
lsr x3, x3, x6
sub x2, x2, x1
sub x3, x3, x1
mov x1, #1
lsl x6, x1, x6 // block size at this level
populate_entries x0, x4, x2, x3, x5, x6, x7
ret
SYM_FUNC_END(remap_region)
SYM_FUNC_START_LOCAL(create_idmap)
mov x28, lr
/*
* The ID map carries a 1:1 mapping of the physical address range
* covered by the loaded image, which could be anywhere in DRAM. This
* means that the required size of the VA (== PA) space is decided at
* boot time, and could be more than the configured size of the VA
* space for ordinary kernel and user space mappings.
*
* There are three cases to consider here:
* - 39 <= VA_BITS < 48, and the ID map needs up to 48 VA bits to cover
* the placement of the image. In this case, we configure one extra
* level of translation on the fly for the ID map only. (This case
* also covers 42-bit VA/52-bit PA on 64k pages).
*
* - VA_BITS == 48, and the ID map needs more than 48 VA bits. This can
* only happen when using 64k pages, in which case we need to extend
* the root level table rather than add a level. Note that we can
* treat this case as 'always extended' as long as we take care not
* to program an unsupported T0SZ value into the TCR register.
*
* - Combinations that would require two additional levels of
* translation are not supported, e.g., VA_BITS==36 on 16k pages, or
* VA_BITS==39/4k pages with 5-level paging, where the input address
* requires more than 47 or 48 bits, respectively.
*/
#if (VA_BITS < 48)
#define IDMAP_PGD_ORDER (VA_BITS - PGDIR_SHIFT)
#define EXTRA_SHIFT (PGDIR_SHIFT + PAGE_SHIFT - 3)
/*
* If VA_BITS < 48, we have to configure an additional table level.
* First, we have to verify our assumption that the current value of
* VA_BITS was chosen such that all translation levels are fully
* utilised, and that lowering T0SZ will always result in an additional
* translation level to be configured.
*/
#if VA_BITS != EXTRA_SHIFT
#error "Mismatch between VA_BITS and page size/number of translation levels"
#endif
#else
#define IDMAP_PGD_ORDER (PHYS_MASK_SHIFT - PGDIR_SHIFT)
#define EXTRA_SHIFT
/*
* If VA_BITS == 48, we don't have to configure an additional
* translation level, but the top-level table has more entries.
*/
#endif
adrp x0, init_idmap_pg_dir
adrp x3, _text
adrp x6, _end + MAX_FDT_SIZE + SWAPPER_BLOCK_SIZE
mov_q x7, SWAPPER_RX_MMUFLAGS
map_memory x0, x1, x3, x6, x7, x3, IDMAP_PGD_ORDER, x10, x11, x12, x13, x14, EXTRA_SHIFT
/* Remap [.init].data, BSS and the kernel page tables r/w in the ID map */
adrp x1, _text
adrp x2, __initdata_begin
adrp x3, _end
bic x4, x2, #SWAPPER_BLOCK_SIZE - 1
mov_q x5, SWAPPER_RW_MMUFLAGS
mov x6, #SWAPPER_BLOCK_SHIFT
bl remap_region
/* Remap the FDT after the kernel image */
adrp x1, _text
adrp x22, _end + SWAPPER_BLOCK_SIZE
bic x2, x22, #SWAPPER_BLOCK_SIZE - 1
bfi x22, x21, #0, #SWAPPER_BLOCK_SHIFT // remapped FDT address
add x3, x2, #MAX_FDT_SIZE + SWAPPER_BLOCK_SIZE
bic x4, x21, #SWAPPER_BLOCK_SIZE - 1
mov_q x5, SWAPPER_RW_MMUFLAGS
mov x6, #SWAPPER_BLOCK_SHIFT
bl remap_region
/*
* Since the page tables have been populated with non-cacheable
* accesses (MMU disabled), invalidate those tables again to
* remove any speculatively loaded cache lines.
*/
cbnz x19, 0f // skip cache invalidation if MMU is on
dmb sy
adrp x0, init_idmap_pg_dir
adrp x1, init_idmap_pg_end
bl dcache_inval_poc
0: ret x28
SYM_FUNC_END(create_idmap)
/*
* Initialize CPU registers with task-specific and cpu-specific context.
*
@ -729,11 +513,6 @@ SYM_FUNC_START_LOCAL(__no_granule_support)
SYM_FUNC_END(__no_granule_support)
SYM_FUNC_START_LOCAL(__primary_switch)
mrs x1, tcr_el1
mov x2, #64 - VA_BITS
tcr_set_t0sz x1, x2
msr tcr_el1, x1
adrp x1, reserved_pg_dir
adrp x2, init_idmap_pg_dir
bl __enable_mmu
@ -742,7 +521,7 @@ SYM_FUNC_START_LOCAL(__primary_switch)
mov sp, x1
mov x29, xzr
mov x0, x20 // pass the full boot status
mov x1, x22 // pass the low FDT mapping
mov x1, x21 // pass the FDT
bl __pi_early_map_kernel // Map and relocate the kernel
ldr x8, =__primary_switched

View File

@ -52,6 +52,7 @@ PROVIDE(__pi_cavium_erratum_27456_cpus = cavium_erratum_27456_cpus);
PROVIDE(__pi__ctype = _ctype);
PROVIDE(__pi_memstart_offset_seed = memstart_offset_seed);
PROVIDE(__pi_init_idmap_pg_dir = init_idmap_pg_dir);
PROVIDE(__pi_init_pg_dir = init_pg_dir);
PROVIDE(__pi_init_pg_end = init_pg_end);

View File

@ -11,6 +11,9 @@ KBUILD_CFLAGS := $(subst $(CC_FLAGS_FTRACE),,$(KBUILD_CFLAGS)) -fpie \
-fno-asynchronous-unwind-tables -fno-unwind-tables \
$(call cc-option,-fno-addrsig)
# this code may run with the MMU off so disable unaligned accesses
CFLAGS_map_range.o += -mstrict-align
# remove SCS flags from all objects in this directory
KBUILD_CFLAGS := $(filter-out $(CC_FLAGS_SCS), $(KBUILD_CFLAGS))
# disable LTO

View File

@ -128,6 +128,22 @@ static void __init map_kernel(u64 kaslr_offset, u64 va_offset, int root_level)
}
}
static void __init map_fdt(u64 fdt)
{
static u8 ptes[INIT_IDMAP_FDT_SIZE] __initdata __aligned(PAGE_SIZE);
u64 efdt = fdt + MAX_FDT_SIZE;
u64 ptep = (u64)ptes;
/*
* Map up to MAX_FDT_SIZE bytes, but avoid overlap with
* the kernel image.
*/
map_range(&ptep, fdt, (u64)_text > fdt ? min((u64)_text, efdt) : efdt,
fdt, PAGE_KERNEL, IDMAP_ROOT_LEVEL,
(pte_t *)init_idmap_pg_dir, false, 0);
dsb(ishst);
}
asmlinkage void __init early_map_kernel(u64 boot_status, void *fdt)
{
static char const chosen_str[] __initconst = "/chosen";
@ -136,6 +152,8 @@ asmlinkage void __init early_map_kernel(u64 boot_status, void *fdt)
int root_level = 4 - CONFIG_PGTABLE_LEVELS;
int chosen;
map_fdt((u64)fdt);
/* Clear BSS and the initial page tables */
memset(__bss_start, 0, (u64)init_pg_end - (u64)__bss_start);

View File

@ -86,3 +86,15 @@ void __init map_range(u64 *pte, u64 start, u64 end, u64 pa, pgprot_t prot,
tbl++;
}
}
asmlinkage u64 __init create_init_idmap(pgd_t *pg_dir)
{
u64 ptep = (u64)pg_dir + PAGE_SIZE;
map_range(&ptep, (u64)_stext, (u64)__initdata_begin, (u64)_stext,
PAGE_KERNEL_ROX, IDMAP_ROOT_LEVEL, (pte_t *)pg_dir, false, 0);
map_range(&ptep, (u64)__initdata_begin, (u64)_end, (u64)__initdata_begin,
PAGE_KERNEL, IDMAP_ROOT_LEVEL, (pte_t *)pg_dir, false, 0);
return ptep;
}

View File

@ -21,6 +21,8 @@ static inline void *prel64_to_pointer(const prel64_t *offset)
extern bool dynamic_scs_is_enabled;
extern pgd_t init_idmap_pg_dir[];
void init_feature_override(u64 boot_status, const void *fdt, int chosen);
u64 kaslr_early_init(void *fdt, int chosen);
void relocate_kernel(u64 offset);
@ -30,3 +32,5 @@ void map_range(u64 *pgd, u64 start, u64 end, u64 pa, pgprot_t prot,
int level, pte_t *tbl, bool may_use_cont, u64 va_offset);
asmlinkage void early_map_kernel(u64 boot_status, void *fdt);
asmlinkage u64 create_init_idmap(pgd_t *pgd);

View File

@ -45,8 +45,6 @@
#define NO_CONT_MAPPINGS BIT(1)
#define NO_EXEC_MAPPINGS BIT(2) /* assumes FEAT_HPDS is not used */
int idmap_t0sz __ro_after_init;
#if VA_BITS > 48
u64 vabits_actual __ro_after_init = VA_BITS_MIN;
EXPORT_SYMBOL(vabits_actual);
@ -793,8 +791,6 @@ void __init paging_init(void)
pgd_t *pgdp = pgd_set_fixmap(__pa_symbol(swapper_pg_dir));
extern pgd_t init_idmap_pg_dir[];
idmap_t0sz = 63UL - __fls(__pa_symbol(_end) | GENMASK(VA_BITS_MIN - 1, 0));
map_kernel(pgdp);
map_mem(pgdp);
@ -809,7 +805,6 @@ void __init paging_init(void)
memblock_allow_resize();
create_idmap();
idmap_t0sz = TCR_T0SZ(IDMAP_VA_BITS);
}
#ifdef CONFIG_MEMORY_HOTPLUG

View File

@ -200,7 +200,8 @@ SYM_FUNC_ALIAS(__pi_idmap_cpu_replace_ttbr1, idmap_cpu_replace_ttbr1)
#ifdef CONFIG_UNMAP_KERNEL_AT_EL0
#define KPTI_NG_PTE_FLAGS (PTE_ATTRINDX(MT_NORMAL) | SWAPPER_PTE_FLAGS | PTE_WRITE)
#define KPTI_NG_PTE_FLAGS (PTE_ATTRINDX(MT_NORMAL) | PTE_TYPE_PAGE | \
PTE_AF | PTE_SHARED | PTE_UXN | PTE_WRITE)
.pushsection ".idmap.text", "a"