hwmon: (aquacomputer_d5next) Add support for reading virtual temp sensors
Add support for reading virtual temperature sensors for the D5 Next, Octo, Quadro and Farbwerk 360. Virtual temperature sensors are written to the device by the user, pulling from an arbitrary value source. Writing to them is not yet reverse engineered, so the only way to set them for now is to use the official software. Signed-off-by: Aleksa Savic <savicaleksa83@gmail.com> Link: https://lore.kernel.org/r/20220817121441.112198-1-savicaleksa83@gmail.com Signed-off-by: Guenter Roeck <linux@roeck-us.net>
This commit is contained in:
Aleksa Savic
Guenter Roeck
parent
1bce56b25a
commit
e2769f5e7f
|
|
@ -20,10 +20,11 @@ This driver exposes hardware sensors of listed Aquacomputer devices, which
|
|||
communicate through proprietary USB HID protocols.
|
||||
|
||||
For the D5 Next pump, available sensors are pump and fan speed, power, voltage
|
||||
and current, as well as coolant temperature. Also available through debugfs are
|
||||
the serial number, firmware version and power-on count. Attaching a fan to it is
|
||||
optional and allows it to be controlled using temperature curves directly from the
|
||||
pump. If it's not connected, the fan-related sensors will report zeroes.
|
||||
and current, as well as coolant temperature and eight virtual temp sensors. Also
|
||||
available through debugfs are the serial number, firmware version and power-on
|
||||
count. Attaching a fan to it is optional and allows it to be controlled using
|
||||
temperature curves directly from the pump. If it's not connected, the fan-related
|
||||
sensors will report zeroes.
|
||||
|
||||
The pump can be configured either through software or via its physical
|
||||
interface. Configuring the pump through this driver is not implemented, as it
|
||||
|
|
@ -31,14 +32,19 @@ seems to require sending it a complete configuration. That includes addressable
|
|||
RGB LEDs, for which there is no standard sysfs interface. Thus, that task is
|
||||
better suited for userspace tools.
|
||||
|
||||
The Octo exposes four temperature sensors and eight PWM controllable fans, along
|
||||
with their speed (in RPM), power, voltage and current.
|
||||
The Octo exposes four physical and sixteen virtual temperature sensors, as well as
|
||||
eight PWM controllable fans, along with their speed (in RPM), power, voltage and
|
||||
current.
|
||||
|
||||
The Quadro exposes four temperature sensors, a flow sensor and four PWM controllable
|
||||
fans, along with their speed (in RPM), power, voltage and current.
|
||||
The Quadro exposes four physical and sixteen virtual temperature sensors, a flow
|
||||
sensor and four PWM controllable fans, along with their speed (in RPM), power,
|
||||
voltage and current.
|
||||
|
||||
The Farbwerk and Farbwerk 360 expose four temperature sensors. Depending on the device,
|
||||
not all sysfs and debugfs entries will be available.
|
||||
The Farbwerk and Farbwerk 360 expose four temperature sensors. Additionally,
|
||||
sixteen virtual temperature sensors of the Farbwerk 360 are exposed.
|
||||
|
||||
Depending on the device, not all sysfs and debugfs entries will be available.
|
||||
Writing to virtual temperature sensors is not currently supported.
|
||||
|
||||
Usage notes
|
||||
-----------
|
||||
|
|
@ -49,14 +55,14 @@ the kernel and supports hotswapping.
|
|||
Sysfs entries
|
||||
-------------
|
||||
|
||||
================ ==============================================
|
||||
temp[1-4]_input Temperature sensors (in millidegrees Celsius)
|
||||
================ ==============================================================
|
||||
temp[1-20]_input Physical/virtual temperature sensors (in millidegrees Celsius)
|
||||
fan[1-8]_input Pump/fan speed (in RPM) / Flow speed (in dL/h)
|
||||
power[1-8]_input Pump/fan power (in micro Watts)
|
||||
in[0-7]_input Pump/fan voltage (in milli Volts)
|
||||
curr[1-8]_input Pump/fan current (in milli Amperes)
|
||||
pwm[1-8] Fan PWM (0 - 255)
|
||||
================ ==============================================
|
||||
================ ==============================================================
|
||||
|
||||
Debugfs entries
|
||||
---------------
|
||||
|
|
|
|||
|
|
@ -71,6 +71,8 @@ static u8 secondary_ctrl_report[] = {
|
|||
#define D5NEXT_COOLANT_TEMP 0x57
|
||||
#define D5NEXT_NUM_FANS 2
|
||||
#define D5NEXT_NUM_SENSORS 1
|
||||
#define D5NEXT_NUM_VIRTUAL_SENSORS 8
|
||||
#define D5NEXT_VIRTUAL_SENSORS_START 0x3f
|
||||
#define D5NEXT_PUMP_OFFSET 0x6c
|
||||
#define D5NEXT_FAN_OFFSET 0x5f
|
||||
#define D5NEXT_5V_VOLTAGE 0x39
|
||||
|
|
@ -86,14 +88,18 @@ static u16 d5next_ctrl_fan_offsets[] = { 0x97, 0x42 };
|
|||
#define FARBWERK_SENSOR_START 0x2f
|
||||
|
||||
/* Register offsets for the Farbwerk 360 RGB controller */
|
||||
#define FARBWERK360_NUM_SENSORS 4
|
||||
#define FARBWERK360_SENSOR_START 0x32
|
||||
#define FARBWERK360_NUM_SENSORS 4
|
||||
#define FARBWERK360_SENSOR_START 0x32
|
||||
#define FARBWERK360_NUM_VIRTUAL_SENSORS 16
|
||||
#define FARBWERK360_VIRTUAL_SENSORS_START 0x3a
|
||||
|
||||
/* Register offsets for the Octo fan controller */
|
||||
#define OCTO_POWER_CYCLES 0x18
|
||||
#define OCTO_NUM_FANS 8
|
||||
#define OCTO_NUM_SENSORS 4
|
||||
#define OCTO_SENSOR_START 0x3D
|
||||
#define OCTO_NUM_VIRTUAL_SENSORS 16
|
||||
#define OCTO_VIRTUAL_SENSORS_START 0x45
|
||||
#define OCTO_CTRL_REPORT_SIZE 0x65F
|
||||
static u8 octo_sensor_fan_offsets[] = { 0x7D, 0x8A, 0x97, 0xA4, 0xB1, 0xBE, 0xCB, 0xD8 };
|
||||
|
||||
|
|
@ -105,6 +111,8 @@ static u16 octo_ctrl_fan_offsets[] = { 0x5B, 0xB0, 0x105, 0x15A, 0x1AF, 0x204, 0
|
|||
#define QUADRO_NUM_FANS 4
|
||||
#define QUADRO_NUM_SENSORS 4
|
||||
#define QUADRO_SENSOR_START 0x34
|
||||
#define QUADRO_NUM_VIRTUAL_SENSORS 16
|
||||
#define QUADRO_VIRTUAL_SENSORS_START 0x3c
|
||||
#define QUADRO_CTRL_REPORT_SIZE 0x3c1
|
||||
#define QUADRO_FLOW_SENSOR_OFFSET 0x6e
|
||||
static u8 quadro_sensor_fan_offsets[] = { 0x70, 0x7D, 0x8A, 0x97 };
|
||||
|
|
@ -147,6 +155,25 @@ static const char *const label_temp_sensors[] = {
|
|||
"Sensor 4"
|
||||
};
|
||||
|
||||
static const char *const label_virtual_temp_sensors[] = {
|
||||
"Virtual sensor 1",
|
||||
"Virtual sensor 2",
|
||||
"Virtual sensor 3",
|
||||
"Virtual sensor 4",
|
||||
"Virtual sensor 5",
|
||||
"Virtual sensor 6",
|
||||
"Virtual sensor 7",
|
||||
"Virtual sensor 8",
|
||||
"Virtual sensor 9",
|
||||
"Virtual sensor 10",
|
||||
"Virtual sensor 11",
|
||||
"Virtual sensor 12",
|
||||
"Virtual sensor 13",
|
||||
"Virtual sensor 14",
|
||||
"Virtual sensor 15",
|
||||
"Virtual sensor 16",
|
||||
};
|
||||
|
||||
/* Labels for Octo and Quadro (except speed) */
|
||||
static const char *const label_fan_speed[] = {
|
||||
"Fan 1 speed",
|
||||
|
|
@ -220,6 +247,8 @@ struct aqc_data {
|
|||
u16 *fan_ctrl_offsets;
|
||||
int num_temp_sensors;
|
||||
int temp_sensor_start_offset;
|
||||
int num_virtual_temp_sensors;
|
||||
int virtual_temp_sensor_start_offset;
|
||||
u16 power_cycle_count_offset;
|
||||
u8 flow_sensor_offset;
|
||||
|
||||
|
|
@ -231,7 +260,7 @@ struct aqc_data {
|
|||
u32 power_cycles;
|
||||
|
||||
/* Sensor values */
|
||||
s32 temp_input[4];
|
||||
s32 temp_input[20]; /* Max 4 physical and 16 virtual */
|
||||
u16 speed_input[8];
|
||||
u32 power_input[8];
|
||||
u16 voltage_input[8];
|
||||
|
|
@ -239,6 +268,7 @@ struct aqc_data {
|
|||
|
||||
/* Label values */
|
||||
const char *const *temp_label;
|
||||
const char *const *virtual_temp_label;
|
||||
const char *const *speed_label;
|
||||
const char *const *power_label;
|
||||
const char *const *voltage_label;
|
||||
|
|
@ -345,7 +375,7 @@ static umode_t aqc_is_visible(const void *data, enum hwmon_sensor_types type, u3
|
|||
|
||||
switch (type) {
|
||||
case hwmon_temp:
|
||||
if (channel < priv->num_temp_sensors)
|
||||
if (channel < priv->num_temp_sensors + priv->num_virtual_temp_sensors)
|
||||
return 0444;
|
||||
break;
|
||||
case hwmon_pwm:
|
||||
|
|
@ -447,7 +477,10 @@ static int aqc_read_string(struct device *dev, enum hwmon_sensor_types type, u32
|
|||
|
||||
switch (type) {
|
||||
case hwmon_temp:
|
||||
*str = priv->temp_label[channel];
|
||||
if (channel < priv->num_temp_sensors)
|
||||
*str = priv->temp_label[channel];
|
||||
else
|
||||
*str = priv->virtual_temp_label[channel - priv->num_temp_sensors];
|
||||
break;
|
||||
case hwmon_fan:
|
||||
*str = priv->speed_label[channel];
|
||||
|
|
@ -509,6 +542,22 @@ static const struct hwmon_ops aqc_hwmon_ops = {
|
|||
|
||||
static const struct hwmon_channel_info *aqc_info[] = {
|
||||
HWMON_CHANNEL_INFO(temp,
|
||||
HWMON_T_INPUT | HWMON_T_LABEL,
|
||||
HWMON_T_INPUT | HWMON_T_LABEL,
|
||||
HWMON_T_INPUT | HWMON_T_LABEL,
|
||||
HWMON_T_INPUT | HWMON_T_LABEL,
|
||||
HWMON_T_INPUT | HWMON_T_LABEL,
|
||||
HWMON_T_INPUT | HWMON_T_LABEL,
|
||||
HWMON_T_INPUT | HWMON_T_LABEL,
|
||||
HWMON_T_INPUT | HWMON_T_LABEL,
|
||||
HWMON_T_INPUT | HWMON_T_LABEL,
|
||||
HWMON_T_INPUT | HWMON_T_LABEL,
|
||||
HWMON_T_INPUT | HWMON_T_LABEL,
|
||||
HWMON_T_INPUT | HWMON_T_LABEL,
|
||||
HWMON_T_INPUT | HWMON_T_LABEL,
|
||||
HWMON_T_INPUT | HWMON_T_LABEL,
|
||||
HWMON_T_INPUT | HWMON_T_LABEL,
|
||||
HWMON_T_INPUT | HWMON_T_LABEL,
|
||||
HWMON_T_INPUT | HWMON_T_LABEL,
|
||||
HWMON_T_INPUT | HWMON_T_LABEL,
|
||||
HWMON_T_INPUT | HWMON_T_LABEL,
|
||||
|
|
@ -568,7 +617,7 @@ static const struct hwmon_chip_info aqc_chip_info = {
|
|||
|
||||
static int aqc_raw_event(struct hid_device *hdev, struct hid_report *report, u8 *data, int size)
|
||||
{
|
||||
int i, sensor_value;
|
||||
int i, j, sensor_value;
|
||||
struct aqc_data *priv;
|
||||
|
||||
if (report->id != STATUS_REPORT_ID)
|
||||
|
|
@ -581,7 +630,7 @@ static int aqc_raw_event(struct hid_device *hdev, struct hid_report *report, u8
|
|||
priv->serial_number[1] = get_unaligned_be16(data + SERIAL_SECOND_PART);
|
||||
priv->firmware_version = get_unaligned_be16(data + FIRMWARE_VERSION);
|
||||
|
||||
/* Temperature sensor readings */
|
||||
/* Physical temperature sensor readings */
|
||||
for (i = 0; i < priv->num_temp_sensors; i++) {
|
||||
sensor_value = get_unaligned_be16(data +
|
||||
priv->temp_sensor_start_offset +
|
||||
|
|
@ -592,6 +641,18 @@ static int aqc_raw_event(struct hid_device *hdev, struct hid_report *report, u8
|
|||
priv->temp_input[i] = sensor_value * 10;
|
||||
}
|
||||
|
||||
/* Virtual temperature sensor readings */
|
||||
for (j = 0; j < priv->num_virtual_temp_sensors; j++) {
|
||||
sensor_value = get_unaligned_be16(data +
|
||||
priv->virtual_temp_sensor_start_offset +
|
||||
j * AQC_TEMP_SENSOR_SIZE);
|
||||
if (sensor_value == AQC_TEMP_SENSOR_DISCONNECTED)
|
||||
priv->temp_input[i] = -ENODATA;
|
||||
else
|
||||
priv->temp_input[i] = sensor_value * 10;
|
||||
i++;
|
||||
}
|
||||
|
||||
/* Fan speed and related readings */
|
||||
for (i = 0; i < priv->num_fans; i++) {
|
||||
priv->speed_input[i] =
|
||||
|
|
@ -717,10 +778,13 @@ static int aqc_probe(struct hid_device *hdev, const struct hid_device_id *id)
|
|||
priv->fan_ctrl_offsets = d5next_ctrl_fan_offsets;
|
||||
priv->num_temp_sensors = D5NEXT_NUM_SENSORS;
|
||||
priv->temp_sensor_start_offset = D5NEXT_COOLANT_TEMP;
|
||||
priv->num_virtual_temp_sensors = D5NEXT_NUM_VIRTUAL_SENSORS;
|
||||
priv->virtual_temp_sensor_start_offset = D5NEXT_VIRTUAL_SENSORS_START;
|
||||
priv->power_cycle_count_offset = D5NEXT_POWER_CYCLES;
|
||||
priv->buffer_size = D5NEXT_CTRL_REPORT_SIZE;
|
||||
|
||||
priv->temp_label = label_d5next_temp;
|
||||
priv->virtual_temp_label = label_virtual_temp_sensors;
|
||||
priv->speed_label = label_d5next_speeds;
|
||||
priv->power_label = label_d5next_power;
|
||||
priv->voltage_label = label_d5next_voltages;
|
||||
|
|
@ -740,7 +804,11 @@ static int aqc_probe(struct hid_device *hdev, const struct hid_device_id *id)
|
|||
priv->num_fans = 0;
|
||||
priv->num_temp_sensors = FARBWERK360_NUM_SENSORS;
|
||||
priv->temp_sensor_start_offset = FARBWERK360_SENSOR_START;
|
||||
priv->num_virtual_temp_sensors = FARBWERK360_NUM_VIRTUAL_SENSORS;
|
||||
priv->virtual_temp_sensor_start_offset = FARBWERK360_VIRTUAL_SENSORS_START;
|
||||
|
||||
priv->temp_label = label_temp_sensors;
|
||||
priv->virtual_temp_label = label_virtual_temp_sensors;
|
||||
break;
|
||||
case USB_PRODUCT_ID_OCTO:
|
||||
priv->kind = octo;
|
||||
|
|
@ -750,10 +818,13 @@ static int aqc_probe(struct hid_device *hdev, const struct hid_device_id *id)
|
|||
priv->fan_ctrl_offsets = octo_ctrl_fan_offsets;
|
||||
priv->num_temp_sensors = OCTO_NUM_SENSORS;
|
||||
priv->temp_sensor_start_offset = OCTO_SENSOR_START;
|
||||
priv->num_virtual_temp_sensors = OCTO_NUM_VIRTUAL_SENSORS;
|
||||
priv->virtual_temp_sensor_start_offset = OCTO_VIRTUAL_SENSORS_START;
|
||||
priv->power_cycle_count_offset = OCTO_POWER_CYCLES;
|
||||
priv->buffer_size = OCTO_CTRL_REPORT_SIZE;
|
||||
|
||||
priv->temp_label = label_temp_sensors;
|
||||
priv->virtual_temp_label = label_virtual_temp_sensors;
|
||||
priv->speed_label = label_fan_speed;
|
||||
priv->power_label = label_fan_power;
|
||||
priv->voltage_label = label_fan_voltage;
|
||||
|
|
@ -767,11 +838,14 @@ static int aqc_probe(struct hid_device *hdev, const struct hid_device_id *id)
|
|||
priv->fan_ctrl_offsets = quadro_ctrl_fan_offsets;
|
||||
priv->num_temp_sensors = QUADRO_NUM_SENSORS;
|
||||
priv->temp_sensor_start_offset = QUADRO_SENSOR_START;
|
||||
priv->num_virtual_temp_sensors = QUADRO_NUM_VIRTUAL_SENSORS;
|
||||
priv->virtual_temp_sensor_start_offset = QUADRO_VIRTUAL_SENSORS_START;
|
||||
priv->power_cycle_count_offset = QUADRO_POWER_CYCLES;
|
||||
priv->buffer_size = QUADRO_CTRL_REPORT_SIZE;
|
||||
priv->flow_sensor_offset = QUADRO_FLOW_SENSOR_OFFSET;
|
||||
|
||||
priv->temp_label = label_temp_sensors;
|
||||
priv->virtual_temp_label = label_virtual_temp_sensors;
|
||||
priv->speed_label = label_quadro_speeds;
|
||||
priv->power_label = label_fan_power;
|
||||
priv->voltage_label = label_fan_voltage;
|
||||
|
|
|
|||
Loading…
Reference in New Issue