Our prior mode of operation didn't allow nested interrupts
because it makes the interrupt code much simpler. However,
nested interrupts are better for latency.
This code uses the EIEM register to simulate level interrupts
and thus achieve nesting.
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
Signed-off-by: Kyle McMartin <kyle@parisc-linux.org>
This version (relative to the current tree):
o eliminates "while (ticks_elapsed)" loop. It's not needed.
o drop "ticks_elapsed" completely from timer_interrupt().
o Estimates elapsed cycles (based on HZ) to see which kind of
math we want to use to calculate "cycles_remainder".
o Fixes a bug where we would loose a tick if we decided
we wanted to skip one interrupt.
Signed-off-by: Grant Grundler <grundler@parisc-linux.org>
Signed-off-by: Kyle McMartin <kyle@parisc-linux.org>
It's just a bit easier to follow and timer code is complex enough.
So far, only tested on A500-5x (64-bit SMP), ie: gettimeoffset() code
hasn't been tested at all.
Signed-off-by: Grant Grundler <grundler@parisc-linux.org>
Signed-off-by: Kyle McMartin <kyle@parisc-linux.org>
Use the __raw_spin_lock_flags routine so we can take an interrupt while
spinning. This re-fixes a bug jejb found on 2005-10-20:
CPU0 does a flush_tlb_all holding the vmlist_lock for write.
CPU1 tries a cat of /proc/meminfo which tries to acquire vmlist_lock for read
CPU1 is now spinning with interrupts disabled
CPU0 tries to execute a smp_call_function to flush the local tlb caches
This is now a deadlock because CPU1 is spinning with interrupts disabled and
can never receive the IPI
Signed-off-by: Matthew Wilcox <matthew@wil.cx>
Signed-off-by: Kyle McMartin <kyle@parisc-linux.org>
I couldn't find where the itimer was getting started for slave CPUs.
CPU 0 (master) itimer was started in time_init() (arch/parisc/kernel/time.c).
start_cpu_itimer() code was striped from time_init().
Slaves now start their itimer in smp_cpu_init().
This is a first step towards making gettimeoffset() work for SMP.
Next step will be to determine the CR16 (cycle counter)
offsets for each CPU relative to the master (CPU 0).
Signed-off-by: Grant Grundler <grundler@parisc-linux.org>
Signed-off-by: Kyle McMartin <kyle@parisc-linux.org>
This isn't likely to be causing problems for other bits of
kernel code. I can't find any other user of CONFIG_HZ outside
of arch specific code.
Signed-off-by: Grant Grundler <grundler@parisc-linux.org>
Signed-off-by: Kyle McMartin <kyle@parisc-linux.org>
Rewrite rwlock implementation to avoid various deadlocks in the current
scheme.
Signed-off-by: Matthew Wilcox <matthew@wil.cx>
Signed-off-by: Kyle McMartin <kyle@parisc-linux.org>
Russell King pointed out that asm/serial.h is anachronistic and we were
misusing BASE_BAUD. So fix BASE_BAUD for PCI 16550 UARTs, move LASI_BASE_BAUD
into 8250_gsc, and fix the obsolete comment about reserving serial port slots.
Signed-off-by: Matthew Wilcox <matthew@wil.cx>
Signed-off-by: Kyle McMartin <kyle@parisc-linux.org>
Stop using PER_LINUX32 to designate processes needing
compaterizing. Convert is_compat_task to use TIF_32BIT and
set TIF_32BIT in binfmt_elf32.c
Signed-off-by: Kyle McMartin <kyle@parisc-linux.org>
This patch fixes the pa8800 at a gross level (there are still other
subtle incoherency issues which can still cause crashes and HPMCs).
What it does is try to force eject inequivalent aliases before they
become visible to the L2 cache (which is where we get the incoherence
problems).
A new function (parisc_requires_coherency) is introduced in
asm/processor.h to identify the pa8x00 processors (8800 and 8900)
which have the issue.
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
Signed-off-by: Kyle McMartin <kyle@parisc-linux.org>
Add header for McKinley bus related code. Remove extern decl
of proc_mckinley_root in drivers/parisc/sba_iommu.c
Signed-off-by: Kyle McMartin <kyle@parisc-linux.org>
Abstract existing shift register left macros as shift register
right are. This lends itself to a nice clean up of some #ifdef
blocks in entry.S
Signed-off-by: Kyle McMartin <kyle@parisc-linux.org>
It seems PA7200 processors also suppress traps on loads to
%r0. This means we can prefetch for read on these cpus. Of course,
we can't support prefetch for write, since that requires
LOAD DOUBLEWORD which was added with PA2.0
Signed-off-by: Kyle McMartin <kyle@parisc-linux.org>
asm/processor.h on parisc wants spinlocks for cpuinfo, but
linux/spinlock_types.h needs lockdep, and lockdep wants prefetch.
This leads to a horrible circular dependancy, because <asm/processor.h>
is including something which depends on things which are not defined
until the end of the file.
Kludge around this by moving prefetch related code into <asm/prefetch.h>
and including it before <linux/spinlock_types.h>, however this is just
a temporary solution until this mess can be cleaned up.
Signed-off-by: Kyle McMartin <kyle@parisc-linux.org>
Hi,
This patch adds a new type for 3rd party module use and cleans up a deprecated
message type.
Signed-off-by: Steve Grubb <sgrubb@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Hi,
This patch removes the rdev logging from the previous patch
The below patch closes an unbounded use of name_count. This can lead to oopses
in some new file systems.
Signed-off-by: Steve Grubb <sgrubb@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
On Thu, Sep 28, 2006 at 04:03:06PM -0400, Eric Paris wrote:
> After some looking I did not see a way to get into audit_log_exit
> without having set the ppid. So I am dropping the set from there and
> only doing it at the beginning.
>
> Please comment/ack/nak as soon as possible.
Ehh... That's one hell of an overhead to be had ;-/ Let's be lazy.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Currently the kernel audit system represents arch's as numbers and will
gladly accept comparisons between archs using >, <, >=, <= when the only
thing that makes sense is = or !=. I'm told that the next revision of
auditctl will do this checking but this will provide enforcement in the
kernel even for old userspace. A simple command to show the issue would
be to run
auditctl -d entry,always -F arch>i686 -S chmod
with this patch the kernel will reject this with -EINVAL
Please comment/ack/nak as soon as possible.
-Eric
kernel/auditfilter.c | 9 ++++++++-
1 file changed, 8 insertions(+), 1 deletion(-)
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
This patch introduces the BEET mode (Bound End-to-End Tunnel) with as
specified by the ietf draft at the following link:
http://www.ietf.org/internet-drafts/draft-nikander-esp-beet-mode-06.txt
The patch provides only single family support (i.e. inner family =
outer family).
Signed-off-by: Diego Beltrami <diego.beltrami@gmail.com>
Signed-off-by: Miika Komu <miika@iki.fi>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Abhinav Pathak <abhinav.pathak@hiit.fi>
Signed-off-by: Jeff Ahrenholz <ahrenholz@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
GCC can't tell we always initialize 'tv' in all the cases
we actually use it, so explicitly set it up with zeros.
Signed-off-by: David S. Miller <davem@davemloft.net>
Remove unused file, estimators live in net/core/gen_estimator.c now.
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Om Narasimhan <om.turyx@gmail.com>
Signed-off-by: Chas Williams <chas@cmf.nrl.navy.mil>
Signed-off-by: David S. Miller <davem@davemloft.net>
gcc spits out this warning:
net/tipc/link.c: In function ‘link_retransmit_failure’:
net/tipc/link.c:1669: warning: cast from pointer to integer of different
size
More than a little bit ugly, storing integers in void*, but at least the
code is correct, unlike some of the more crufty Linux kernel code found
elsewhere.
Rather than having two casts to massage the value into u32, it's easier
just to have a single cast and use "%lu", since it's just a printk.
Signed-off-by: Jeff Garzik <jeff@garzik.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
When we flush policies, we do a type match so we might not
actually delete all policies matching a certain direction.
So keep track of how many policies we actually kill and
subtract that number from xfrm_policy_count[dir] at the
end.
Based upon a patch by Masahide NAKAMURA.
Signed-off-by: David S. Miller <davem@davemloft.net>
Src hash is introduced for Mobile IPv6 route optimization usage.
On current kenrel code it is calculated with source address only.
It results we uses the same hash value for outbound state (when
the node has only one address for Mobile IPv6).
This patch use also destination address as peer information for
src hash to be dispersed.
Signed-off-by: Masahide NAKAMURA <nakam@linux-ipv6.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Make sure hash_mask is protected with tbl->lock in all cases just like
the hash_buckets.
Signed-off-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: David S. Miller <davem@davemloft.net>
UDP tracks corking status through the pending variable. The
IP layer also tracks it through the socket write queue. It
is possible for the two to get out of sync when MSG_PROBE is
used.
This patch changes UDP to check the write queue to ensure
that the two stay in sync.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
The udp6_sendmsg function uses a shared buffer to store the
flow without taking any locks. This leads to races with SMP.
This patch moves the flowi object onto the stack.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Acked-by: James Morris <jmorris@namei.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
With commit 10fd48f237 [1] , RB_EMPTY_NODE
changed behaviour so it returns true when the node is empty as expected.
Hence Patrick McHardy's fix for sched_htb.c should be reverted.
Signed-off-by: Ismail Donmez <ismail@pardus.org.tr>
ACKed-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
The following patch adds or/and/xor functionality for the mark target,
while staying backwards compatible.
Signed-off-by: Bart De Schuymer <bdschuym@pandora.be>
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Use ip_route_me_harder instead, which now allows to specify how we wish
the packet to be routed.
Based on patch by Simon Horman <horms@verge.net.au>.
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
For policy routing, packets originating from this machine itself may be
routed differently to packets passing through. We want this packet to be
routed as if it came from this machine itself. So re-compute the routing
information using ip_route_me_harder().
This patch is derived from work by Ken Brownfield
Cc: Ken Brownfield <krb@irridia.com>
Signed-off-by: Simon Horman <horms@verge.net.au>
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
By adding a type parameter to ip_route_me_harder() the
expensive call to inet_addr_type() can be avoided in some cases.
A followup patch where ip_route_me_harder() is called from within
ip_vs_out() is one such example.
Signed-off-By: Simon Horman <horms@verge.net.au>
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
xt_physdev depends on bridge netfilter, which is a boolean, but can still
be built modular because of special handling in the bridge makefile. Add
a dependency on BRIDGE to prevent XT_MATCH_PHYSDEV=y, BRIDGE=m.
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add support for MPC832x MDS evaluation board.
This patch depends on the 8360+QE lib patches by Leo.
The MPC832x processors (MPC8323E, MPC8323, MPC8321E, MPC8321) sport
the e300c2 core plus a QUICC Engine (QE). This patch adds support for
the 832x MDS evaluation board.
The 832x MDS dts and defconfig files are pending more tests.
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>